You are not logged in.
- Topics: Active | Unanswered
#1 2025-03-19 17:28:05
- cryptodan
- Member
- Registered: 2019-09-20
- Posts: 38
[SOLVED] Internal Audio not working but Bluetooth Works
Output for inxi -Fxrzc0
System:
Kernel: 6.13.7-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
Desktop: Budgie v: 10.9.2 Distro: Arch Linux
Machine:
Type: Desktop Mobo: Supermicro model: C7Z97-OCE v:
serial: <superuser required> UEFI: American Megatrends v: 1.0
date: 04/25/2014
CPU:
Info: quad core model: Intel Core i7-4790K bits: 64 type: MT MCP
arch: Haswell rev: 3 cache: L1: 256 KiB L2: 1024 KiB L3: 8 MiB
Speed (MHz): avg: 800 min/max: 800/4400 cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 800 bogomips: 63853
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3060 Ti Lite Hash Rate]
vendor: eVga.com. driver: nvidia v: 570.124.04 arch: Ampere bus-ID: 01:00.0
Display: x11 server: X.Org v: 21.1.16 with: Xwayland v: 24.1.6 driver: X:
loaded: nvidia unloaded: modesetting,vesa gpu: nvidia,nvidia-nvswitch
resolution: 1: 3840x2160~60Hz 2: 3840x2160~60Hz 3: 3840x2160~60Hz
API: EGL v: 1.5 drivers: nvidia platforms:
active: gbm,x11,surfaceless,device inactive: wayland
API: OpenGL v: 4.6.0 vendor: nvidia v: 570.124.04 glx-v: 1.4
direct-render: yes renderer: NVIDIA GeForce RTX 3060 Ti/PCIe/SSE2
Info: Tools: api: eglinfo,glxinfo de: xfce4-display-settings
gpu: nvidia-settings,nvidia-smi x11: xdriinfo, xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel 9 Series Family HD Audio vendor: Super Micro
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
Device-2: NVIDIA GA104 High Definition Audio vendor: eVga.com.
driver: snd_hda_intel v: kernel bus-ID: 01:00.1
API: ALSA v: k6.13.7-arch1-1 status: kernel-api
Server-1: JACK v: 1.9.22 status: off
Server-2: PipeWire v: 1.4.1 status: active
Network:
Device-1: Intel Ethernet I217-V vendor: Super Micro driver: e1000e v: kernel
port: f040 bus-ID: 00:19.0
IF: eno1 state: down mac: <filter>
Device-2: Intel Wi-Fi 6E AX210/AX1675 2x2 [Typhoon Peak] driver: iwlwifi
v: kernel bus-ID: 08:00.0
IF: wlp8s0 state: up mac: <filter>
Device-3: Intel I210 Gigabit Network vendor: Super Micro driver: igb
v: kernel port: c000 bus-ID: 0a:00.0
IF: enp10s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB bus-ID: 1-9:3
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.3
lmp-v: 12
Drives:
Local Storage: total: 2.73 TiB used: 894.72 GiB (32.0%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 1TB size: 931.51 GiB
ID-2: /dev/sdb vendor: Samsung model: SSD 840 EVO 1TB size: 931.51 GiB
ID-3: /dev/sdc vendor: Samsung model: SSD 840 EVO 1TB size: 931.51 GiB
Partition:
ID-1: / size: 422.18 GiB used: 124.47 GiB (29.5%) fs: ext4 dev: /dev/sda2
ID-2: /boot size: 499 MiB used: 201.4 MiB (40.4%) fs: vfat dev: /dev/sda1
ID-3: /home size: 915.82 GiB used: 770.05 GiB (84.1%) fs: ext4
dev: /dev/sdb1
Swap:
ID-1: swap-1 type: partition size: 71.02 GiB used: 0 KiB (0.0%)
dev: /dev/sda4
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A gpu: nvidia temp: 35 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Repos:
Packages: 1549
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch
2: http://mirror.adectra.com/archlinux/$repo/os/$arch
3: https://mirror.adectra.com/archlinux/$repo/os/$arch
4: http://mirrors.advancedhosters.com/archlinux/$repo/os/$arch
5: http://mirrors.aggregate.org/archlinux/$repo/os/$arch
6: http://il.us.mirror.archlinux-br.org/$repo/os/$arch
7: http://mirror.arizona.edu/archlinux/$repo/os/$arch
8: https://mirror.arizona.edu/archlinux/$repo/os/$arch
9: http://arlm.tyzoid.com/$repo/os/$arch
10: https://arlm.tyzoid.com/$repo/os/$arch
11: https://mirror.ava.dev/archlinux/$repo/os/$arch
12: http://mirrors.bjg.at/arch/$repo/os/$arch
13: https://mirrors.bjg.at/arch/$repo/os/$arch
14: http://mirrors.bloomu.edu/archlinux/$repo/os/$arch
15: https://mirrors.bloomu.edu/archlinux/$repo/os/$arch
16: http://ca.us.mirror.archlinux-br.org/$repo/os/$arch
17: http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch
18: http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch
19: http://us.mirrors.cicku.me/archlinux/$repo/os/$arch
20: https://us.mirrors.cicku.me/archlinux/$repo/os/$arch
21: http://mirror.clarkson.edu/archlinux/$repo/os/$arch
22: https://mirror.clarkson.edu/archlinux/$repo/os/$arch
23: http://mirror.colonelhosting.com/archlinux/$repo/os/$arch
24: https://mirror.colonelhosting.com/archlinux/$repo/os/$arch
25: http://arch.mirror.constant.com/$repo/os/$arch
26: https://arch.mirror.constant.com/$repo/os/$arch
27: http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch
28: http://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/$arch
29: http://mirror.cybersecurity.nmt.edu/archlinux/$repo/os/$arch
30: https://mirror.cybersecurity.nmt.edu/archlinux/$repo/os/$arch
31: http://distro.ibiblio.org/archlinux/$repo/os/$arch
32: http://mirror.es.its.nyu.edu/archlinux/$repo/os/$arch
33: http://mirror.ette.biz/archlinux/$repo/os/$arch
34: https://mirror.ette.biz/archlinux/$repo/os/$arch
35: http://codingflyboy.mm.fcix.net/archlinux/$repo/os/$arch
36: http://coresite.mm.fcix.net/archlinux/$repo/os/$arch
37: http://forksystems.mm.fcix.net/archlinux/$repo/os/$arch
38: http://irltoolkit.mm.fcix.net/archlinux/$repo/os/$arch
39: http://mirror.fcix.net/archlinux/$repo/os/$arch
40: http://mnvoip.mm.fcix.net/archlinux/$repo/os/$arch
41: http://nnenix.mm.fcix.net/archlinux/$repo/os/$arch
42: http://nocix.mm.fcix.net/archlinux/$repo/os/$arch
43: http://ohioix.mm.fcix.net/archlinux/$repo/os/$arch
44: http://opencolo.mm.fcix.net/archlinux/$repo/os/$arch
45: http://ridgewireless.mm.fcix.net/archlinux/$repo/os/$arch
46: http://southfront.mm.fcix.net/archlinux/$repo/os/$arch
47: http://uvermont.mm.fcix.net/archlinux/$repo/os/$arch
48: http://volico.mm.fcix.net/archlinux/$repo/os/$arch
49: http://ziply.mm.fcix.net/archlinux/$repo/os/$arch
50: https://codingflyboy.mm.fcix.net/archlinux/$repo/os/$arch
51: https://coresite.mm.fcix.net/archlinux/$repo/os/$arch
52: https://forksystems.mm.fcix.net/archlinux/$repo/os/$arch
53: https://irltoolkit.mm.fcix.net/archlinux/$repo/os/$arch
54: https://mirror.fcix.net/archlinux/$repo/os/$arch
55: https://mnvoip.mm.fcix.net/archlinux/$repo/os/$arch
56: https://nnenix.mm.fcix.net/archlinux/$repo/os/$arch
57: https://nocix.mm.fcix.net/archlinux/$repo/os/$arch
58: https://ohioix.mm.fcix.net/archlinux/$repo/os/$arch
59: https://opencolo.mm.fcix.net/archlinux/$repo/os/$arch
60: https://ridgewireless.mm.fcix.net/archlinux/$repo/os/$arch
61: https://southfront.mm.fcix.net/archlinux/$repo/os/$arch
62: https://uvermont.mm.fcix.net/archlinux/$repo/os/$arch
63: https://volico.mm.fcix.net/archlinux/$repo/os/$arch
64: https://ziply.mm.fcix.net/archlinux/$repo/os/$arch
65: http://mirror.fossable.org/archlinux/$repo/os/$arch
66: https://america.mirror.pkgbuild.com/$repo/os/$arch
67: http://mirrors.gigenet.com/archlinux/$repo/os/$arch
68: http://arch.goober.cloud/$repo/os/$arch
69: https://arch.goober.cloud/$repo/os/$arch
70: http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
71: https://mirror.hodgepodge.dev/archlinux/$repo/os/$arch
72: http://mirror.hostup.org/archlinux/$repo/os/$arch
73: https://mirror.hostup.org/archlinux/$repo/os/$arch
74: http://arch.hu.fo/archlinux/$repo/os/$arch
75: https://arch.hu.fo/archlinux/$repo/os/$arch
76: http://repo.ialab.dsu.edu/archlinux/$repo/os/$arch
77: https://repo.ialab.dsu.edu/archlinux/$repo/os/$arch
78: http://mirrors.iu13.net/archlinux/$repo/os/$arch
79: https://mirrors.iu13.net/archlinux/$repo/os/$arch
80: https://arch.mirror.k0.ae/$repo/os/$arch
81: http://mirrors.kernel.org/archlinux/$repo/os/$arch
82: https://mirrors.kernel.org/archlinux/$repo/os/$arch
83: http://mirror.dal10.us.leaseweb.net/archlinux/$repo/os/$arch
84: http://mirror.mia11.us.leaseweb.net/archlinux/$repo/os/$arch
85: http://mirror.sfo12.us.leaseweb.net/archlinux/$repo/os/$arch
86: http://mirror.wdc1.us.leaseweb.net/archlinux/$repo/os/$arch
87: https://mirror.dal10.us.leaseweb.net/archlinux/$repo/os/$arch
88: https://mirror.mia11.us.leaseweb.net/archlinux/$repo/os/$arch
89: https://mirror.sfo12.us.leaseweb.net/archlinux/$repo/os/$arch
90: https://mirror.wdc1.us.leaseweb.net/archlinux/$repo/os/$arch
91: http://mirrors.liquidweb.com/archlinux/$repo/os/$arch
92: http://mirror.lty.me/archlinux/$repo/os/$arch
93: https://mirror.lty.me/archlinux/$repo/os/$arch
94: http://mirrors.lug.mtu.edu/archlinux/$repo/os/$arch
95: https://mirrors.lug.mtu.edu/archlinux/$repo/os/$arch
96: https://m.lqy.me/arch/$repo/os/$arch
97: http://archlinux.macarne.com/$repo/os/$arch
98: https://archlinux.macarne.com/$repo/os/$arch
99: http://mirror.math.princeton.edu/pub/archlinux/$repo/os/$arch
100: http://mirror.metrocast.net/archlinux/$repo/os/$arch
101: http://mirror.kaminski.io/archlinux/$repo/os/$arch
102: https://mirror.kaminski.io/archlinux/$repo/os/$arch
103: http://iad.mirrors.misaka.one/archlinux/$repo/os/$arch
104: https://iad.mirrors.misaka.one/archlinux/$repo/os/$arch
105: http://repo.miserver.it.umich.edu/archlinux/$repo/os/$arch
106: http://mirrors.mit.edu/archlinux/$repo/os/$arch
107: https://mirrors.mit.edu/archlinux/$repo/os/$arch
108: http://mirrors.ocf.berkeley.edu/archlinux/$repo/os/$arch
109: https://mirrors.ocf.berkeley.edu/archlinux/$repo/os/$arch
110: http://archmirror1.octyl.net/$repo/os/$arch
111: https://archmirror1.octyl.net/$repo/os/$arch
112: http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
113: https://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
114: http://arch.mirrors.pair.com/$repo/os/$arch
115: https://mirror.pilotfiber.com/archlinux/$repo/os/$arch
116: http://dfw.mirror.rackspace.com/archlinux/$repo/os/$arch
117: http://iad.mirror.rackspace.com/archlinux/$repo/os/$arch
118: http://ord.mirror.rackspace.com/archlinux/$repo/os/$arch
119: https://dfw.mirror.rackspace.com/archlinux/$repo/os/$arch
120: https://iad.mirror.rackspace.com/archlinux/$repo/os/$arch
121: https://ord.mirror.rackspace.com/archlinux/$repo/os/$arch
122: http://mirrors.radwebhosting.com/archlinux/$repo/os/$arch
123: https://mirrors.radwebhosting.com/archlinux/$repo/os/$arch
124: http://plug-mirror.rcac.purdue.edu/archlinux/$repo/os/$arch
125: https://plug-mirror.rcac.purdue.edu/archlinux/$repo/os/$arch
126: http://mirrors.rit.edu/archlinux/$repo/os/$arch
127: https://mirrors.rit.edu/archlinux/$repo/os/$arch
128: http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
129: https://mirrors.rutgers.edu/archlinux/$repo/os/$arch
130: http://mirror.siena.edu/archlinux/$repo/os/$arch
131: http://mirrors.sonic.net/archlinux/$repo/os/$arch
132: https://mirrors.sonic.net/archlinux/$repo/os/$arch
133: http://mirror.phx1.us.spryservers.net/archlinux/$repo/os/$arch
134: https://mirror.phx1.us.spryservers.net/archlinux/$repo/os/$arch
135: http://arch.mirror.square-r00t.net/$repo/os/$arch
136: https://arch.mirror.square-r00t.net/$repo/os/$arch
137: http://mirror.stjschools.org/arch/$repo/os/$arch
138: https://mirror.stjschools.org/arch/$repo/os/$arch
139: http://ftp.sudhip.com/archlinux/$repo/os/$arch
140: https://ftp.sudhip.com/archlinux/$repo/os/$arch
141: http://mirror.pit.teraswitch.com/archlinux/$repo/os/$arch
142: https://mirror.pit.teraswitch.com/archlinux/$repo/os/$arch
143: https://mirror.the-repo.org/ArchMirror/$repo/os/$arch
144: https://mirror.theash.xyz/arch/$repo/os/$arch
145: https://mirror.tmmworkshop.com/archlinux/$repo/os/$arch
146: http://mirror.umd.edu/archlinux/$repo/os/$arch
147: https://mirror.umd.edu/archlinux/$repo/os/$arch
148: http://mirrors.vectair.net/archlinux/$repo/os/$arch
149: https://mirrors.vectair.net/archlinux/$repo/os/$arch
150: http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch
151: http://wcbmedia.io:8000/$repo/os/$arch
152: http://mirrors.xmission.com/archlinux/$repo/os/$arch
153: http://mirrors.xtom.com/archlinux/$repo/os/$arch
154: https://mirrors.xtom.com/archlinux/$repo/os/$arch
155: https://mirror.zackmyers.io/archlinux/$repo/os/$arch
156: https://zxcvfdsa.com/arch/$repo/os/$arch
Info:
Memory: total: 32 GiB available: 31.27 GiB used: 2.14 GiB (6.8%)
Processes: 307 Uptime: 2m Init: systemd
Compilers: clang: 19.1.7 gcc: 14.2.1 Shell: Bash v: 5.2.37 inxi: 3.3.37I have verified that my pipewire is running and functioning as Bluetooth works but integrated audo does not. What information do you need in order to assist me in fixing this.
Output of systemctl --user status wireplumber pipewire pipewire-pulse
● wireplumber.service - Multimedia Service Session Manager
Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
Active: active (running) since Wed 2025-03-19 17:23:55 UTC; 6min ago
Invocation: 5450f6aa00cd4b47acef9b94b3bb83e9
Main PID: 930 (wireplumber)
Tasks: 6 (limit: 37992)
Memory: 16.7M (peak: 18.7M)
CPU: 507ms
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
└─930 /usr/bin/wireplumber
Mar 19 17:23:55 alphacentauri systemd[916]: Started Multimedia Service Session Manager.
Mar 19 17:23:56 alphacentauri wireplumber[930]: wp-internal-comp-loader: Loading profile 'main'
Mar 19 17:23:56 alphacentauri wireplumber[930]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner
Mar 19 17:23:56 alphacentauri wireplumber[930]: wp-pw-obj-mixin: <WpNode:0x608ecb767e80> ignoring set_param on already destroyed objects
Mar 19 17:23:56 alphacentauri wireplumber[930]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed?
Mar 19 17:23:56 alphacentauri wireplumber[930]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported.
● pipewire.service - PipeWire Multimedia Service
Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
Active: active (running) since Wed 2025-03-19 17:23:55 UTC; 6min ago
Invocation: cd379754893a4f62ae66a06d236c4029
TriggeredBy: ● pipewire.socket
Main PID: 929 (pipewire)
Tasks: 3 (limit: 37992)
Memory: 6.4M (peak: 8.1M)
CPU: 1.140s
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
└─929 /usr/bin/pipewire
Mar 19 17:23:55 alphacentauri systemd[916]: Started PipeWire Multimedia Service.
● pipewire-pulse.service - PipeWire PulseAudio
Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
Active: active (running) since Wed 2025-03-19 17:23:55 UTC; 6min ago
Invocation: 08d3141b4703408780c3886f291e6cf5
TriggeredBy: ● pipewire-pulse.socket
Main PID: 932 (pipewire-pulse)
Tasks: 3 (limit: 37992)
Memory: 12.8M (peak: 14.2M)
CPU: 941ms
CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
└─932 /usr/bin/pipewire-pulse
Mar 19 17:23:55 alphacentauri systemd[916]: Started PipeWire PulseAudio.Last edited by cryptodan (2025-03-31 19:52:11)
Offline
#2 2025-03-19 19:15:40
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,301
Re: [SOLVED] Internal Audio not working but Bluetooth Works
What about
sudo dmesg | grep snd
aplay -lL
pactl list cards
pactl list sinksOffline
#3 2025-03-22 01:15:57
- cryptodan
- Member
- Registered: 2019-09-20
- Posts: 38
Re: [SOLVED] Internal Audio not working but Bluetooth Works
Output of first command:
[cryptodan@alphacentauri ~]$ sudo dmesg | grep snd
[ 0.710035] ata1.00: Features: Trust NCQ-sndrcv
[ 0.711794] ata3.00: Features: Trust NCQ-sndrcv
[ 0.711905] ata2.00: Features: Trust NCQ-sndrcv
[ 5.643749] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 5.644002] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.644007] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.761759] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 5.762264] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 5.762274] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.762277] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.762279] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.762280] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 5.762282] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.762283] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.762284] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.762285] snd_hda_codec_realtek hdaudioC0D0: Line=0x1aSecond
[cryptodan@alphacentauri ~]$ aplay -lL
null
Discard all samples (playback) or generate zero samples (capture)
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pipewire
PipeWire Sound Server
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
default
Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=PCH
HDA Intel PCH, ALC1150 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
Front output / input
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Digital
IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, DELL U2723QE
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, DELL U2723QE
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, DELL U2723QE
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 3
HDMI Audio Output
usbstream:CARD=NVidia
HDA NVidia
USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [DELL U2723QE]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [DELL U2723QE]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [DELL U2723QE]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0Third
[cryptodan@alphacentauri ~]$ pactl list cards
Card #47
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA NVidia at 0xf7080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hw:1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "GA104 High Definition Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "5682620"
device.product.id = "0x228b"
device.product.name = "GA104 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
media.class = "Audio/Device"
spa.object.id = "4"
factory.id = "15"
client.id = "46"
object.id = "47"
object.serial = "47"
object.path = "alsa:acp:NVidia"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
alsa.components = "HDA:10de009e,38424567,00100100"
alsa.id = "NVidia"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "DELL U2723QE"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
device.product.name = "DELL U2723QE"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
device.product.name = "DELL U2723QE"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #48
Name: alsa_card.pci-0000_00_1b.0
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA Intel PCH at 0xf7630000 irq 69"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hw:0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "5804801"
device.product.id = "0x8ca0"
device.product.name = "9 Series Chipset Family HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
spa.object.id = "2"
factory.id = "15"
client.id = "46"
object.id = "48"
object.serial = "48"
object.path = "alsa:acp:PCH"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7630000 irq 69"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Realtek ALC1150"
alsa.components = "HDA:10ec0900,15d90829,00100001"
alsa.id = "PCH"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: output:iec958-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereoFinal
[cryptodan@alphacentauri ~]$ pactl list sinks
Sink #56
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.iec958-stereo
Description: Built-in Audio Digital Stereo (IEC958)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.iec958-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0900,15d90829,00100001"
alsa.device = "1"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC1150 Digital"
alsa.long_card_name = "HDA Intel PCH at 0xf7630000 irq 69"
alsa.mixer_name = "Realtek ALC1150"
alsa.name = "ALC1150 Digital"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0xf7630000 irq 69"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "iec958:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "11"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "48"
device.profile.description = "Digital Stereo (IEC958)"
device.profile.name = "iec958-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio"
node.name = "alsa_output.pci-0000_00_1b.0.iec958-stereo"
node.nick = "ALC1150 Digital"
node.pause-on-idle = "false"
object.path = "alsa:acp:PCH:11:playback"
port.group = "playback"
priority.driver = "736"
priority.session = "736"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "44"
object.serial = "56"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1b.0"
device.enum.api = "udev"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1b.0"
device.nick = "HDA Intel PCH"
device.plugged.usec = "5804801"
device.product.id = "0x8ca0"
device.product.name = "9 Series Chipset Family HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
Active Port: iec958-stereo-output
Formats:
pcm
Sink #102
State: SUSPENDED
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
Description: GA104 High Definition Audio Controller Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.class = "generic"
alsa.components = "HDA:10de009e,38424567,00100100"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
alsa.name = "DELL U2723QE"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA NVidia at 0xf7080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hdmi:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "47"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
iec958.codecs = "[\"PCM\"]"
media.class = "Audio/Sink"
device.description = "GA104 High Definition Audio Controller"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
node.nick = "DELL U2723QE"
node.pause-on-idle = "false"
object.path = "alsa:acp:NVidia:4:playback"
port.group = "playback"
priority.driver = "696"
priority.session = "696"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "52"
object.serial = "102"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "5682620"
device.product.id = "0x228b"
device.product.name = "GA104 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
spa.object.id = "4"
device.string = "1"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Active Port: hdmi-output-0
Formats:
pcmOffline
#4 2025-03-31 16:39:06
- cryptodan
- Member
- Registered: 2019-09-20
- Posts: 38
Re: [SOLVED] Internal Audio not working but Bluetooth Works
Can I please get some assistance here with my build in audo? I have provided the requested information.
Offline
#5 2025-03-31 19:51:17
- cryptodan
- Member
- Registered: 2019-09-20
- Posts: 38
Re: [SOLVED] Internal Audio not working but Bluetooth Works
Consider this issue resolved. I tested the analog out of my RealTek Card via the Green Jack and it worked without issue. I then plugged in my optical cable and it failed to produce any sound via S/PDIF so I thought I would try something:
sudo rmmod -f snd_hda_intel ; sudo modprobe snd_hda_intel
This resolved the sound out for my digital audio on my RealTek ALC1150 sound card.
I rebooted and the settings stayed.
Offline