Arch using 1024x768 resolution

a.drievn · 2025-03-20 00:53:47

I've tried searching throughout but they're only a temporary fix. I used xrandr however after restart it goes back to 1024x768. Because of that, I am forced to use x11 instead of wayland because apparently it only works for x11. I am using intel integrated graphics, and on my first install of arch I never had this issue. I've ordered a new cable just in case no one is able to help me with this issue.

V1del · 2025-03-20 02:11:39

What intel GPU exactly? If you've installed xf86-video-intel you should probably get rid of that. But first of all maybe post a xorg log and a system journal

sudo journalctl -b | curl -F 'file=@-' 0x0.st
cat /var/log/Xorg.0.log | curl -F 'file=@-' 0x0.st

a.drievn · 2025-03-20 09:44:58

V1del wrote:

What intel GPU exactly? If you've installed xf86-video-intel you should probably get rid of that. But first of all maybe post a xorg log and a system journal
sudo journalctl -b | curl -F 'file=@-' 0x0.st
cat /var/log/Xorg.0.log | curl -F 'file=@-' 0x0.st

Hello thank you for a reply, I'm not really familiar with these commands things but here's the txt file

[ 4.389] (--) Log file renamed from "/var/log/Xorg.pid-449.log" to "/var/log/Xorg.0.log"
[ 4.391]
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
[ 4.391] Current Operating System: Linux adrian 6.13.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 13 Mar 2025 18:12:00 +0000 x86_64
[ 4.391] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6daf9620-93e7-453e-ae63-45470ef68bb7 rw rootfstype=btrfs loglevel=3 quiet
[ 4.391]
[ 4.391] Current version of pixman: 0.44.2
[ 4.391] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.391] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.391] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 20 17:42:31 2025
[ 4.393] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.393] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.394] (==) No Layout section. Using the first Screen section.
[ 4.394] (==) No screen section available. Using defaults.
[ 4.394] (**) |-->Screen "Default Screen Section" (0)
[ 4.394] (**) | |-->Monitor "<default monitor>"
[ 4.394] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4.394] (**) | |-->Device "Intel Graphics"
[ 4.394] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.394] (**) Allowing byte-swapped clients
[ 4.394] (==) Automatically adding devices
[ 4.394] (==) Automatically enabling devices
[ 4.394] (==) Automatically adding GPU devices
[ 4.394] (==) Automatically binding GPU devices
[ 4.394] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.394] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 4.394] Entry deleted from font path.
[ 4.394] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 4.394] Entry deleted from font path.
[ 4.394] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 4.394] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 4.394] Entry deleted from font path.
[ 4.394] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 4.394] Entry deleted from font path.
[ 4.394] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 4.394] Entry deleted from font path.
[ 4.394] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 4.394] Entry deleted from font path.
[ 4.394] (==) FontPath set to:

[ 4.395] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.395] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.395] (II) Module ABI versions:
[ 4.395] X.Org ANSI C Emulation: 0.4
[ 4.395] X.Org Video Driver: 25.2
[ 4.395] X.Org XInput driver : 24.4
[ 4.395] X.Org Server Extension : 10.0
[ 4.395] (++) using VT number 2

[ 4.395] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.395] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.395] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 4.412] (--) PCI:*(0@0:2:0) 8086:0102:103c:2b19 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 4.412] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4.412] (II) LoadModule: "glx"
[ 4.413] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.428] (II) Module glx: vendor="X.Org Foundation"
[ 4.428] compiled for 1.21.1.16, module version = 1.0.0
[ 4.428] ABI class: X.Org Server Extension, version 10.0
[ 4.428] (II) LoadModule: "modesetting"
[ 4.428] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.430] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.430] compiled for 1.21.1.16, module version = 1.21.1
[ 4.430] Module class: X.Org Video Driver
[ 4.430] ABI class: X.Org Video Driver, version 25.2
[ 4.430] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.444] (II) modeset(0): using drv /dev/dri/card1
[ 4.444] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.444] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.444] (==) modeset(0): RGB weight 888
[ 4.444] (==) modeset(0): Default visual is TrueColor
[ 4.444] (II) Loading sub module "glamoregl"
[ 4.444] (II) LoadModule: "glamoregl"
[ 4.445] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.453] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.453] compiled for 1.21.1.16, module version = 1.0.1
[ 4.453] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.016] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 2000 (SNB GT1)
[ 5.017] (II) modeset(0): glamor initialized
[ 5.017] (==) modeset(0): VariableRefresh: disabled
[ 5.017] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 5.018] (II) modeset(0): Output VGA-1 has no monitor section
[ 5.019] (II) modeset(0): EDID for output VGA-1
[ 5.019] (II) modeset(0): Printing probed modes for output VGA-1
[ 5.019] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5.019] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.019] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.020] (II) modeset(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 5.020] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.020] (II) modeset(0): Output VGA-1 connected
[ 5.020] (II) modeset(0): Using exact sizes for initial modes
[ 5.020] (II) modeset(0): Output VGA-1 using initial mode 1024x768 +0+0
[ 5.020] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.020] (==) modeset(0): DPI set to (96, 96)
[ 5.020] (II) Loading sub module "fb"
[ 5.020] (II) LoadModule: "fb"
[ 5.020] (II) Module "fb" already built-in
[ 5.045] (==) modeset(0): Backing store enabled
[ 5.045] (==) modeset(0): Silken mouse enabled
[ 5.046] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5.046] (==) modeset(0): DPMS enabled
[ 5.046] (II) modeset(0): [DRI2] Setup complete
[ 5.046] (II) modeset(0): [DRI2] DRI driver: crocus
[ 5.046] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 5.046] (II) Initializing extension Generic Event Extension
[ 5.046] (II) Initializing extension SHAPE
[ 5.046] (II) Initializing extension MIT-SHM
[ 5.046] (II) Initializing extension XInputExtension
[ 5.047] (II) Initializing extension XTEST
[ 5.047] (II) Initializing extension BIG-REQUESTS
[ 5.047] (II) Initializing extension SYNC
[ 5.047] (II) Initializing extension XKEYBOARD
[ 5.047] (II) Initializing extension XC-MISC
[ 5.047] (II) Initializing extension SECURITY
[ 5.047] (II) Initializing extension XFIXES
[ 5.047] (II) Initializing extension RENDER
[ 5.047] (II) Initializing extension RANDR
[ 5.048] (II) Initializing extension COMPOSITE
[ 5.048] (II) Initializing extension DAMAGE
[ 5.048] (II) Initializing extension MIT-SCREEN-SAVER
[ 5.048] (II) Initializing extension DOUBLE-BUFFER
[ 5.048] (II) Initializing extension RECORD
[ 5.048] (II) Initializing extension DPMS
[ 5.048] (II) Initializing extension Present
[ 5.048] (II) Initializing extension DRI3
[ 5.048] (II) Initializing extension X-Resource
[ 5.048] (II) Initializing extension XVideo
[ 5.048] (II) Initializing extension XVideo-MotionCompensation
[ 5.048] (II) Initializing extension GLX
[ 5.057] (II) AIGLX: Loaded and initialized crocus
[ 5.057] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.057] (II) Initializing extension XFree86-VidModeExtension
[ 5.057] (II) Initializing extension XFree86-DGA
[ 5.057] (II) Initializing extension XFree86-DRI
[ 5.057] (II) Initializing extension DRI2
[ 5.058] (II) modeset(0): Damage tracking initialized
[ 5.058] (II) modeset(0): Setting screen physical size to 270 x 203
[ 5.113] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.113] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.113] (**) Power Button: Applying InputClass "system-keyboard"
[ 5.113] (II) LoadModule: "libinput"
[ 5.113] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5.118] (II) Module libinput: vendor="X.Org Foundation"
[ 5.118] compiled for 1.21.1.13, module version = 1.5.0
[ 5.118] Module class: X.Org XInput Driver
[ 5.118] ABI class: X.Org XInput driver, version 24.4
[ 5.118] (II) Using input driver 'libinput' for 'Power Button'
[ 5.118] (**) Power Button: always reports core events
[ 5.118] (**) Option "Device" "/dev/input/event1"
[ 5.123] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.123] (II) event1 - Power Button: device is a keyboard
[ 5.123] (II) event1 - Power Button: device removed
[ 5.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.140] (**) Option "xkb_model" "pc105+inet"
[ 5.140] (**) Option "xkb_layout" "us"
[ 5.140] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.160] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5.160] (II) event1 - Power Button: device is a keyboard
[ 5.161] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 5.161] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5.161] (**) Video Bus: Applying InputClass "system-keyboard"
[ 5.161] (II) Using input driver 'libinput' for 'Video Bus'
[ 5.161] (**) Video Bus: always reports core events
[ 5.161] (**) Option "Device" "/dev/input/event5"
[ 5.161] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 5.161] (II) event5 - Video Bus: device is a keyboard
[ 5.162] (II) event5 - Video Bus: device removed
[ 5.200] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 5.200] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.200] (**) Option "xkb_model" "pc105+inet"
[ 5.200] (**) Option "xkb_layout" "us"
[ 5.200] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.201] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 5.201] (II) event5 - Video Bus: device is a keyboard
[ 5.202] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.202] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5.202] (**) Power Button: Applying InputClass "system-keyboard"
[ 5.202] (II) Using input driver 'libinput' for 'Power Button'
[ 5.202] (**) Power Button: always reports core events
[ 5.202] (**) Option "Device" "/dev/input/event0"
[ 5.203] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.203] (II) event0 - Power Button: device is a keyboard
[ 5.203] (II) event0 - Power Button: device removed
[ 5.213] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.213] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.213] (**) Option "xkb_model" "pc105+inet"
[ 5.213] (**) Option "xkb_layout" "us"
[ 5.213] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.214] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5.214] (II) event0 - Power Button: device is a keyboard
[ 5.215] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event2)
[ 5.215] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.215] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "system-keyboard"
[ 5.215] (II) Using input driver 'libinput' for 'CHICONY USB NetVista Full Width Keyboard'
[ 5.215] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[ 5.215] (**) Option "Device" "/dev/input/event2"
[ 5.217] (II) event2 - CHICONY USB NetVista Full Width Keyboard: is tagged by udev as: Keyboard
[ 5.217] (II) event2 - CHICONY USB NetVista Full Width Keyboard: device is a keyboard
[ 5.218] (II) event2 - CHICONY USB NetVista Full Width Keyboard: device removed
[ 5.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:04B3:3025.0001/input/input2/event2"
[ 5.234] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD, id 9)
[ 5.234] (**) Option "xkb_model" "pc105+inet"
[ 5.234] (**) Option "xkb_layout" "us"
[ 5.234] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.236] (II) event2 - CHICONY USB NetVista Full Width Keyboard: is tagged by udev as: Keyboard
[ 5.236] (II) event2 - CHICONY USB NetVista Full Width Keyboard: device is a keyboard
[ 5.237] (II) config/udev: Adding input device C-Media Electronics Inc. USB PnP Sound Device (/dev/input/event4)
[ 5.237] (**) C-Media Electronics Inc. USB PnP Sound Device: Applying InputClass "libinput keyboard catchall"
[ 5.237] (**) C-Media Electronics Inc. USB PnP Sound Device: Applying InputClass "system-keyboard"
[ 5.237] (II) Using input driver 'libinput' for 'C-Media Electronics Inc. USB PnP Sound Device'
[ 5.237] (**) C-Media Electronics Inc. USB PnP Sound Device: always reports core events
[ 5.237] (**) Option "Device" "/dev/input/event4"
[ 5.239] (II) event4 - C-Media Electronics Inc. USB PnP Sound Device: is tagged by udev as: Keyboard
[ 5.239] (II) event4 - C-Media Electronics Inc. USB PnP Sound Device: device is a keyboard
[ 5.239] (II) event4 - C-Media Electronics Inc. USB PnP Sound Device: device removed
[ 5.271] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:08BB:2902.0003/input/input4/event4"
[ 5.271] (II) XINPUT: Adding extended input device "C-Media Electronics Inc. USB PnP Sound Device" (type: KEYBOARD, id 10)
[ 5.271] (**) Option "xkb_model" "pc105+inet"
[ 5.271] (**) Option "xkb_layout" "us"
[ 5.271] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.273] (II) event4 - C-Media Electronics Inc. USB PnP Sound Device: is tagged by udev as: Keyboard
[ 5.273] (II) event4 - C-Media Electronics Inc. USB PnP Sound Device: device is a keyboard
[ 5.274] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 5.274] (II) No input driver specified, ignoring this device.
[ 5.274] (II) This device may have been added with another device file.
[ 5.274] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11)
[ 5.274] (II) No input driver specified, ignoring this device.
[ 5.274] (II) This device may have been added with another device file.
[ 5.275] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 5.275] (II) No input driver specified, ignoring this device.
[ 5.275] (II) This device may have been added with another device file.
[ 5.275] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 5.275] (II) No input driver specified, ignoring this device.
[ 5.275] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 5.276] (II) No input driver specified, ignoring this device.
[ 5.276] (II) This device may have been added with another device file.
[ 5.277] (II) config/udev: Adding input device YSPRINGTECH USB OPTICAL MOUSE (/dev/input/event3)
[ 5.277] (**) YSPRINGTECH USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 5.277] (II) Using input driver 'libinput' for 'YSPRINGTECH USB OPTICAL MOUSE'
[ 5.277] (**) YSPRINGTECH USB OPTICAL MOUSE: always reports core events
[ 5.277] (**) Option "Device" "/dev/input/event3"
[ 5.330] (II) event3 - YSPRINGTECH USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 5.330] (II) event3 - YSPRINGTECH USB OPTICAL MOUSE: device is a pointer
[ 5.331] (II) event3 - YSPRINGTECH USB OPTICAL MOUSE: device removed
[ 5.366] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.366] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.366] (II) libinput: YSPRINGTECH USB OPTICAL MOUSE: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 5.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:10C4:8108.0002/input/input3/event3"
[ 5.366] (II) XINPUT: Adding extended input device "YSPRINGTECH USB OPTICAL MOUSE" (type: MOUSE, id 11)
[ 5.366] (**) Option "AccelerationScheme" "none"
[ 5.366] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 5.366] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 5.366] (**) YSPRINGTECH USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 5.419] (II) event3 - YSPRINGTECH USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 5.419] (II) event3 - YSPRINGTECH USB OPTICAL MOUSE: device is a pointer
[ 5.421] (II) config/udev: Adding input device YSPRINGTECH USB OPTICAL MOUSE (/dev/input/mouse0)
[ 5.421] (II) No input driver specified, ignoring this device.
[ 5.421] (II) This device may have been added with another device file.
[ 5.422] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 5.422] (II) No input driver specified, ignoring this device.
[ 5.422] (II) This device may have been added with another device file.
[ 5.428] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 5.428] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.428] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 5.428] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 5.428] (**) HP WMI hotkeys: always reports core events
[ 5.428] (**) Option "Device" "/dev/input/event7"
[ 5.429] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5.429] (II) event7 - HP WMI hotkeys: device is a keyboard
[ 5.429] (II) event7 - HP WMI hotkeys: device removed
[ 5.461] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 5.461] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 5.461] (**) Option "xkb_model" "pc105+inet"
[ 5.461] (**) Option "xkb_layout" "us"
[ 5.461] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 5.462] (II) event7 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 5.462] (II) event7 - HP WMI hotkeys: device is a keyboard

Lone_Wolf · 2025-03-20 11:15:02

Please edit your post to use code tags to improve readability , see https://bbs.archlinux.org/help.php#bbcode .

Nothing weird in the xorg log .

seth · 2025-03-20 13:44:09

[     5.019] (II) modeset(0): EDID for output VGA-1

But there's none, so you're getting the VESA modes.

only a temporary fix. I used xrandr however after restart it goes back to 1024x768.

https://wiki.archlinux.org/title/Xrandr … esolutions

I am forced to use x11 instead of wayland because

https://wiki.archlinux.org/title/Kernel … s_and_EDID

Arch Linux

#1 2025-03-20 00:53:47

Arch using 1024x768 resolution

#2 2025-03-20 02:11:39

Re: Arch using 1024x768 resolution

#3 2025-03-20 09:44:58

Re: Arch using 1024x768 resolution

#4 2025-03-20 11:15:02

Re: Arch using 1024x768 resolution

#5 2025-03-20 13:44:09

Re: Arch using 1024x768 resolution

Board footer