You are not logged in.
- Topics: Active | Unanswered
#1 2025-04-12 04:21:01
- questionask
- Member
- Registered: 2021-01-09
- Posts: 74
Xfce black screen for a few seconds after booting
I'm using Xfce on a T14s Gen3 AMD. Since ~1 day, my laptop screen is black after logging in, with only the cursor visible. I.e., it takes some while (5-10 seconds?) until I see the desktop, which was not the case previously.
/var/log/Xorg.0.log
[ 6.204]
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
[ 6.204] Current Operating System: Linux host 6.14.2-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 10 Apr 2025 18:43:47 +0000 x86_64
[ 6.204] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=0579f6a1-7308-411c-a1f8-43f3d2e06fd4 rw amd_pstate=active lsm=landlock,lockdown,yama,integrity,apparmor,bpf loglevel=3
[ 6.204]
[ 6.204] Current version of pixman: 0.44.2
[ 6.204] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.204] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.204] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 12 05:29:10 2025
[ 6.205] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.206] (==) No Layout section. Using the first Screen section.
[ 6.206] (==) No screen section available. Using defaults.
[ 6.206] (**) |-->Screen "Default Screen Section" (0)
[ 6.206] (**) | |-->Monitor "<default monitor>"
[ 6.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.206] (**) Allowing byte-swapped clients
[ 6.206] (==) Automatically adding devices
[ 6.206] (==) Automatically enabling devices
[ 6.206] (==) Automatically adding GPU devices
[ 6.206] (==) Automatically binding GPU devices
[ 6.206] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.206] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 6.206] Entry deleted from font path.
[ 6.207] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 6.207] Entry deleted from font path.
[ 6.207] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 6.207] Entry deleted from font path.
[ 6.208] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 6.208] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.208] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.208] (II) Module ABI versions:
[ 6.208] X.Org ANSI C Emulation: 0.4
[ 6.208] X.Org Video Driver: 25.2
[ 6.208] X.Org XInput driver : 24.4
[ 6.208] X.Org Server Extension : 10.0
[ 6.209] (++) using VT number 7
[ 6.209] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.210] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.210] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:33:00.0/drm/card1
[ 6.247] (--) PCI:*(51@0:0:0) 1002:1681:17aa:50b4 rev 209, Mem @ 0x8e0000000/268435456, 0x8f0000000/2097152, 0x98900000/524288, I/O @ 0x00001000/256
[ 6.247] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.247] (II) LoadModule: "glx"
[ 6.247] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.252] (II) Module glx: vendor="X.Org Foundation"
[ 6.252] compiled for 1.21.1.16, module version = 1.0.0
[ 6.252] ABI class: X.Org Server Extension, version 10.0
[ 6.252] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 6.252] loading driver: amdgpu
[ 6.252] (==) Matched amdgpu as autoconfigured driver 0
[ 6.252] (==) Matched ati as autoconfigured driver 1
[ 6.252] (==) Matched modesetting as autoconfigured driver 2
[ 6.252] (==) Matched fbdev as autoconfigured driver 3
[ 6.252] (==) Matched vesa as autoconfigured driver 4
[ 6.252] (==) Assigned the driver to the xf86ConfigLayout
[ 6.252] (II) LoadModule: "amdgpu"
[ 6.253] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 6.254] (II) Module amdgpu: vendor="X.Org Foundation"
[ 6.254] compiled for 1.21.1.11, module version = 23.0.0
[ 6.254] Module class: X.Org Video Driver
[ 6.254] ABI class: X.Org Video Driver, version 25.2
[ 6.254] (II) LoadModule: "ati"
[ 6.254] (WW) Warning, couldn't open module ati
[ 6.254] (EE) Failed to load module "ati" (module does not exist, 0)
[ 6.254] (II) LoadModule: "modesetting"
[ 6.254] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6.255] (II) Module modesetting: vendor="X.Org Foundation"
[ 6.255] compiled for 1.21.1.16, module version = 1.21.1
[ 6.255] Module class: X.Org Video Driver
[ 6.255] ABI class: X.Org Video Driver, version 25.2
[ 6.255] (II) LoadModule: "fbdev"
[ 6.255] (WW) Warning, couldn't open module fbdev
[ 6.255] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 6.255] (II) LoadModule: "vesa"
[ 6.255] (WW) Warning, couldn't open module vesa
[ 6.255] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 6.255] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 6.255] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6.260] (WW) Falling back to old probe method for modesetting
[ 6.260] (EE) open /dev/dri/card0: No such file or directory
[ 6.260] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6.260] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 6.260] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 6.260] (==) AMDGPU(0): Default visual is TrueColor
[ 6.260] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[ 6.260] (==) AMDGPU(0): RGB weight 888
[ 6.260] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 6.260] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1681)
[ 6.260] (II) Loading sub module "fb"
[ 6.260] (II) LoadModule: "fb"
[ 6.260] (II) Module "fb" already built-in
[ 6.260] (II) Loading sub module "dri2"
[ 6.260] (II) LoadModule: "dri2"
[ 6.260] (II) Module "dri2" already built-in
[ 6.355] (II) Loading sub module "glamoregl"
[ 6.355] (II) LoadModule: "glamoregl"
[ 6.355] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6.358] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6.358] compiled for 1.21.1.16, module version = 1.0.1
[ 6.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.370] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, rembrandt, LLVM 19.1.7, DRM 3.61, 6.14.2-zen1-1-zen)
[ 6.370] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 6.370] (==) AMDGPU(0): TearFree property default: auto
[ 6.370] (==) AMDGPU(0): VariableRefresh: disabled
[ 6.370] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 6.370] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 6.371] (II) AMDGPU(0): Output eDP has no monitor section
[ 6.371] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-4 has no monitor section
[ 6.371] (II) AMDGPU(0): Output DisplayPort-5 has no monitor section
[ 6.374] (WW) AMDGPU(0): 8 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[ 6.375] (II) AMDGPU(0): EDID for output eDP
[ 6.375] (II) AMDGPU(0): Manufacturer: LEN Model: 403a Serial#: 0
[ 6.375] (II) AMDGPU(0): Year: 2021 Week: 0
[ 6.375] (II) AMDGPU(0): EDID Version: 1.4
[ 6.375] (II) AMDGPU(0): Digital Display Input
[ 6.375] (II) AMDGPU(0): 8 bits per channel
[ 6.375] (II) AMDGPU(0): Digital interface is DisplayPort
[ 6.375] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 6.375] (II) AMDGPU(0): Gamma: 2.20
[ 6.375] (II) AMDGPU(0): No DPMS capabilities specified
[ 6.375] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 6.375] (II) AMDGPU(0): Default color space is primary color space
[ 6.375] (II) AMDGPU(0): First detailed timing is preferred mode
[ 6.375] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 6.375] (II) AMDGPU(0): Display is continuous-frequency
[ 6.375] (II) AMDGPU(0): redX: 0.641 redY: 0.330 greenX: 0.291 greenY: 0.609
[ 6.375] (II) AMDGPU(0): blueX: 0.148 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 6.375] (II) AMDGPU(0): Manufacturer's mask: 0
[ 6.375] (II) AMDGPU(0): Supported detailed timing:
[ 6.376] (II) AMDGPU(0): clock: 154.1 MHz Image Size: 302 x 188 mm
[ 6.376] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 6.376] (II) AMDGPU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 6.376] (II) AMDGPU(0): Ranges: V min: 40 V max: 60 Hz, H min: 74 H max: 74 kHz, PixClock max 165 MHz
[ 6.376] (II) AMDGPU(0): Unknown vendor-specific block f
[ 6.376] (II) AMDGPU(0): LP140WU1-SPB2
[ 6.376] (II) AMDGPU(0): EDID (in hex):
[ 6.376] (II) AMDGPU(0): 00ffffffffffff0030ae3a4000000000
[ 6.376] (II) AMDGPU(0): 001f0104a51e1378072815a4544a9c26
[ 6.376] (II) AMDGPU(0): 0e505400000001010101010101010101
[ 6.376] (II) AMDGPU(0): 010101010101353c80a070b023403020
[ 6.376] (II) AMDGPU(0): 36002ebc1000001a000000fd00283c4a
[ 6.376] (II) AMDGPU(0): 4a10010a2020202020200000000f00d1
[ 6.376] (II) AMDGPU(0): 0a3cd10a28280a0430e48206000000fe
[ 6.376] (II) AMDGPU(0): 004c503134305755312d535042320069
[ 6.376] (II) AMDGPU(0): Printing probed modes for output eDP
[ 6.376] (II) AMDGPU(0): Modeline "1920x1200"x60.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 6.376] (II) AMDGPU(0): Modeline "1920x1080"x60.0 154.13 1920 1968 2000 2080 1080 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1600x1200"x60.0 154.13 1600 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1680x1050"x60.0 154.13 1680 1968 2000 2080 1050 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1280x1024"x60.0 154.13 1280 1968 2000 2080 1024 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1440x900"x60.0 154.13 1440 1968 2000 2080 900 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1280x800"x60.0 154.13 1280 1968 2000 2080 800 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1280x720"x60.0 154.13 1280 1968 2000 2080 720 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "1024x768"x60.0 154.13 1024 1968 2000 2080 768 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "800x600"x60.0 154.13 800 1968 2000 2080 600 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): Modeline "640x480"x60.0 154.13 640 1968 2000 2080 480 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 6.376] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-3
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-4
[ 6.376] (II) AMDGPU(0): EDID for output DisplayPort-5
[ 6.376] (II) AMDGPU(0): Output eDP connected
[ 6.376] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-3 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-4 disconnected
[ 6.376] (II) AMDGPU(0): Output DisplayPort-5 disconnected
[ 6.376] (II) AMDGPU(0): Using exact sizes for initial modes
[ 6.376] (II) AMDGPU(0): Output eDP using initial mode 1920x1200 +0+0
[ 6.376] (II) AMDGPU(0): mem size init: gart size :3c2d0f000 vram size: s:3df79000 visible:3df79000
[ 6.376] (==) AMDGPU(0): DPI set to (96, 96)
[ 6.376] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.376] (II) Loading sub module "ramdac"
[ 6.376] (II) LoadModule: "ramdac"
[ 6.376] (II) Module "ramdac" already built-in
[ 6.376] (II) UnloadModule: "modesetting"
[ 6.376] (II) Unloading modesetting
[ 6.376] (II) AMDGPU(0): [DRI2] Setup complete
[ 6.376] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 6.376] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 6.410] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[ 6.410] (II) AMDGPU(0): SYNC extension fences enabled
[ 6.410] (II) AMDGPU(0): Present extension enabled
[ 6.410] (==) AMDGPU(0): DRI3 enabled
[ 6.410] (==) AMDGPU(0): Backing store enabled
[ 6.410] (II) AMDGPU(0): Direct rendering enabled
[ 6.418] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 6.418] (II) AMDGPU(0): Acceleration enabled
[ 6.418] (==) AMDGPU(0): DPMS enabled
[ 6.418] (==) AMDGPU(0): Silken mouse enabled
[ 6.418] (II) AMDGPU(0): Set up textured video (glamor)
[ 6.424] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 6.424] (II) Initializing extension Generic Event Extension
[ 6.424] (II) Initializing extension SHAPE
[ 6.425] (II) Initializing extension MIT-SHM
[ 6.425] (II) Initializing extension XInputExtension
[ 6.425] (II) Initializing extension XTEST
[ 6.425] (II) Initializing extension BIG-REQUESTS
[ 6.425] (II) Initializing extension SYNC
[ 6.425] (II) Initializing extension XKEYBOARD
[ 6.425] (II) Initializing extension XC-MISC
[ 6.426] (II) Initializing extension SECURITY
[ 6.426] (II) Initializing extension XFIXES
[ 6.426] (II) Initializing extension RENDER
[ 6.426] (II) Initializing extension RANDR
[ 6.426] (II) Initializing extension COMPOSITE
[ 6.426] (II) Initializing extension DAMAGE
[ 6.426] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.426] (II) Initializing extension DOUBLE-BUFFER
[ 6.426] (II) Initializing extension RECORD
[ 6.426] (II) Initializing extension DPMS
[ 6.426] (II) Initializing extension Present
[ 6.426] (II) Initializing extension DRI3
[ 6.426] (II) Initializing extension X-Resource
[ 6.426] (II) Initializing extension XVideo
[ 6.427] (II) Initializing extension XVideo-MotionCompensation
[ 6.427] (II) Initializing extension GLX
[ 6.432] (II) AIGLX: Loaded and initialized radeonsi
[ 6.432] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.432] (II) Initializing extension XFree86-VidModeExtension
[ 6.432] (II) Initializing extension XFree86-DGA
[ 6.432] (II) Initializing extension XFree86-DRI
[ 6.432] (II) Initializing extension DRI2
[ 6.432] (II) AMDGPU(0): Setting screen physical size to 508 x 317
[ 6.512] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.512] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.512] (II) LoadModule: "libinput"
[ 6.513] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.515] (II) Module libinput: vendor="X.Org Foundation"
[ 6.515] compiled for 1.21.1.13, module version = 1.5.0
[ 6.515] Module class: X.Org XInput Driver
[ 6.515] ABI class: X.Org XInput driver, version 24.4
[ 6.515] (II) Using input driver 'libinput' for 'Power Button'
[ 6.515] (**) Power Button: always reports core events
[ 6.515] (**) Option "Device" "/dev/input/event3"
[ 6.522] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.522] (II) event3 - Power Button: device is a keyboard
[ 6.522] (II) event3 - Power Button: device removed
[ 6.522] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.522] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.522] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.522] (II) event3 - Power Button: device is a keyboard
[ 6.523] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 6.523] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.523] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.523] (**) Video Bus: always reports core events
[ 6.523] (**) Option "Device" "/dev/input/event8"
[ 6.523] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 6.523] (II) event8 - Video Bus: device is a keyboard
[ 6.524] (II) event8 - Video Bus: device removed
[ 6.539] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:00/input/input10/event8"
[ 6.539] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.540] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 6.540] (II) event8 - Video Bus: device is a keyboard
[ 6.540] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6.540] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.540] (II) Using input driver 'libinput' for 'Power Button'
[ 6.540] (**) Power Button: always reports core events
[ 6.540] (**) Option "Device" "/dev/input/event0"
[ 6.541] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.541] (II) event0 - Power Button: device is a keyboard
[ 6.541] (II) event0 - Power Button: device removed
[ 6.541] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 6.541] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.541] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.541] (II) event0 - Power Button: device is a keyboard
[ 6.542] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 6.542] (II) No input driver specified, ignoring this device.
[ 6.542] (II) This device may have been added with another device file.
[ 6.542] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.542] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6.542] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6.542] (**) Sleep Button: always reports core events
[ 6.542] (**) Option "Device" "/dev/input/event2"
[ 6.542] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 6.543] (II) event2 - Sleep Button: device is a keyboard
[ 6.543] (II) event2 - Sleep Button: device removed
[ 6.543] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 6.543] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.543] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 6.543] (II) event2 - Sleep Button: device is a keyboard
[ 6.544] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[ 6.544] (II) No input driver specified, ignoring this device.
[ 6.544] (II) This device may have been added with another device file.
[ 6.544] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event10)
[ 6.544] (II) No input driver specified, ignoring this device.
[ 6.544] (II) This device may have been added with another device file.
[ 6.544] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event11)
[ 6.544] (II) No input driver specified, ignoring this device.
[ 6.544] (II) This device may have been added with another device file.
[ 6.545] (II) config/udev: Adding input device Microsoft Microsoft® Classic IntelliMouse® (/dev/input/event5)
[ 6.545] (**) Microsoft Microsoft® Classic IntelliMouse®: Applying InputClass "libinput pointer catchall"
[ 6.545] (II) Using input driver 'libinput' for 'Microsoft Microsoft® Classic IntelliMouse®'
[ 6.545] (**) Microsoft Microsoft® Classic IntelliMouse®: always reports core events
[ 6.545] (**) Option "Device" "/dev/input/event5"
[ 6.597] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: is tagged by udev as: Mouse
[ 6.597] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device set to 3200 DPI
[ 6.597] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device is a pointer
[ 6.597] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device removed
[ 6.610] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.610] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.610] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.610] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:33:00.4/usb3/3-2/3-2:1.0/0003:045E:0823.0001/input/input5/event5"
[ 6.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Classic IntelliMouse®" (type: MOUSE, id 10)
[ 6.610] (**) Option "AccelerationScheme" "none"
[ 6.610] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) selected scheme none/0
[ 6.610] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) acceleration factor: 2.000
[ 6.610] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) acceleration threshold: 4
[ 6.664] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: is tagged by udev as: Mouse
[ 6.664] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device set to 3200 DPI
[ 6.664] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device is a pointer
[ 6.665] (II) config/udev: Adding input device Microsoft Microsoft® Classic IntelliMouse® (/dev/input/mouse0)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[ 6.665] (II) No input driver specified, ignoring this device.
[ 6.665] (II) This device may have been added with another device file.
[ 6.665] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Mouse (/dev/input/event6)
[ 6.665] (**) SYNA8018:00 06CB:CE67 Mouse: Applying InputClass "libinput pointer catchall"
[ 6.665] (II) Using input driver 'libinput' for 'SYNA8018:00 06CB:CE67 Mouse'
[ 6.665] (**) SYNA8018:00 06CB:CE67 Mouse: always reports core events
[ 6.665] (**) Option "Device" "/dev/input/event6"
[ 6.666] (II) event6 - SYNA8018:00 06CB:CE67 Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.666] (II) event6 - SYNA8018:00 06CB:CE67 Mouse: device is a pointer
[ 6.667] (II) event6 - SYNA8018:00 06CB:CE67 Mouse: device removed
[ 6.691] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.691] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.691] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.691] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-SYNA8018:00/0018:06CB:CE67.0003/input/input11/event6"
[ 6.691] (II) XINPUT: Adding extended input device "SYNA8018:00 06CB:CE67 Mouse" (type: MOUSE, id 11)
[ 6.691] (**) Option "AccelerationScheme" "none"
[ 6.691] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) selected scheme none/0
[ 6.691] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) acceleration factor: 2.000
[ 6.691] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) acceleration threshold: 4
[ 6.693] (II) event6 - SYNA8018:00 06CB:CE67 Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.693] (II) event6 - SYNA8018:00 06CB:CE67 Mouse: device is a pointer
[ 6.694] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Mouse (/dev/input/mouse1)
[ 6.694] (II) No input driver specified, ignoring this device.
[ 6.694] (II) This device may have been added with another device file.
[ 6.694] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Touchpad (/dev/input/event7)
[ 6.694] (**) SYNA8018:00 06CB:CE67 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 6.694] (II) Using input driver 'libinput' for 'SYNA8018:00 06CB:CE67 Touchpad'
[ 6.694] (**) SYNA8018:00 06CB:CE67 Touchpad: always reports core events
[ 6.694] (**) Option "Device" "/dev/input/event7"
[ 6.695] (II) event7 - SYNA8018:00 06CB:CE67 Touchpad: is tagged by udev as: Touchpad
[ 6.696] (II) event7 - SYNA8018:00 06CB:CE67 Touchpad: device is a touchpad
[ 6.696] (II) event7 - SYNA8018:00 06CB:CE67 Touchpad: device removed
[ 6.711] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.711] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.711] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.712] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-SYNA8018:00/0018:06CB:CE67.0003/input/input12/event7"
[ 6.712] (II) XINPUT: Adding extended input device "SYNA8018:00 06CB:CE67 Touchpad" (type: TOUCHPAD, id 12)
[ 6.712] (**) Option "AccelerationScheme" "none"
[ 6.712] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) selected scheme none/0
[ 6.712] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) acceleration factor: 2.000
[ 6.712] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) acceleration threshold: 4
[ 6.713] (II) event7 - SYNA8018:00 06CB:CE67 Touchpad: is tagged by udev as: Touchpad
[ 6.714] (II) event7 - SYNA8018:00 06CB:CE67 Touchpad: device is a touchpad
[ 6.715] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Touchpad (/dev/input/mouse2)
[ 6.715] (II) No input driver specified, ignoring this device.
[ 6.715] (II) This device may have been added with another device file.
[ 6.715] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 6.715] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.715] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 6.715] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.715] (**) Option "Device" "/dev/input/event4"
[ 6.715] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.715] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.716] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 6.716] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 6.716] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 6.716] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.716] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.719] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event14)
[ 6.719] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 6.719] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 6.719] (**) ThinkPad Extra Buttons: always reports core events
[ 6.719] (**) Option "Device" "/dev/input/event14"
[ 6.719] (II) event14 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 6.719] (II) event14 - ThinkPad Extra Buttons: device is a keyboard
[ 6.719] (II) event14 - ThinkPad Extra Buttons: device removed
[ 6.719] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input14/event14"
[ 6.719] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 6.720] (II) event14 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 6.720] (II) event14 - ThinkPad Extra Buttons: device is a keyboard
[ 11.453] (II) AMDGPU(0): EDID vendor "LEN", prod id 16442
[ 11.453] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 11.453] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 11.453] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11.453] (II) AMDGPU(0): Modeline "1920x1200"x0.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 11.455] (II) AMDGPU(0): EDID vendor "LEN", prod id 16442
[ 11.455] (II) AMDGPU(0): Using hsync ranges from config file
[ 11.455] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 11.455] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 11.455] (II) AMDGPU(0): Modeline "1920x1200"x0.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 11.502] (WW) AMDGPU(0): flip queue failed: Invalid argument
[ 11.502] (WW) AMDGPU(0): Page flip failed: Invalid argument
[ 11.515] (II) AMDGPU(0): Allocate new frame buffer 2866x1791
[ 11.517] (II) AMDGPU(0): => pitch 11776 bytes
[ 31.943] (II) AMDGPU(0): Allocate new frame buffer 2866x1792
[ 31.943] (II) AMDGPU(0): => pitch 11776 bytesOffline
#2 2025-04-12 07:40:26
- seth
- Member
- Registered: 2012-09-03
- Posts: 65,272
Re: Xfce black screen for a few seconds after booting
See whether it's the https://wiki.archlinux.org/title/Xfwm#Composite_manager (disable that) or whether the desktop shell crash-restarts (check the system journal and/or https://wiki.archlinux.org/title/Core_d … _core_dump )
Offline
#3 2025-04-13 05:38:11
- questionask
- Member
- Registered: 2021-01-09
- Posts: 74
Re: Xfce black screen for a few seconds after booting
It seems (one trial) that disabling the composite manager solves this problem, but the network manager applet takes approximately the same time to be started as previously the desktop to show.
I didn't find any clues in the journal (no errors at all) or core dump (info desktop or info shell no dumps today).
Offline
#4 2025-04-13 06:19:25
- seth
- Member
- Registered: 2012-09-03
- Posts: 65,272
Re: Xfce black screen for a few seconds after booting
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Is the "NM applet" soem widget thingy or a systray icon?
Do you have other icons in the systray?
Offline
#5 2025-04-13 07:06:09
- questionask
- Member
- Registered: 2021-01-09
- Posts: 74
Re: Xfce black screen for a few seconds after booting
It's https://archlinux.org/packages/?q=netwo … ger-applet
My other icons are redshift-gtk, power saving icon, volume, date/time.
EDIT: With a new reboot, the problem with the black screen reoccurred despite the disabled compositor.
$ cat /var/log/Xorg.0.log
[ 5.818]
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
[ 5.818] Current Operating System: Linux host 6.14.2-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Thu, 10 Apr 2025 18:43:47 +0000 x86_64
[ 5.818] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=0579f6a1-7308-411c-a1f8-43f3d2e06fd4 rw amd_pstate=active lsm=landlock,lockdown,yama,integrity,apparmor,bpf loglevel=3
[ 5.818]
[ 5.818] Current version of pixman: 0.44.2
[ 5.818] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.818] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.818] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 13 08:56:40 2025
[ 5.819] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.820] (==) No Layout section. Using the first Screen section.
[ 5.820] (==) No screen section available. Using defaults.
[ 5.820] (**) |-->Screen "Default Screen Section" (0)
[ 5.820] (**) | |-->Monitor "<default monitor>"
[ 5.820] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.820] (**) Allowing byte-swapped clients
[ 5.820] (==) Automatically adding devices
[ 5.820] (==) Automatically enabling devices
[ 5.820] (==) Automatically adding GPU devices
[ 5.820] (==) Automatically binding GPU devices
[ 5.820] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.821] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5.821] Entry deleted from font path.
[ 5.821] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5.821] Entry deleted from font path.
[ 5.821] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5.821] Entry deleted from font path.
[ 5.822] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 5.822] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.822] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.822] (II) Module ABI versions:
[ 5.822] X.Org ANSI C Emulation: 0.4
[ 5.822] X.Org Video Driver: 25.2
[ 5.822] X.Org XInput driver : 24.4
[ 5.822] X.Org Server Extension : 10.0
[ 5.822] (++) using VT number 7
[ 5.822] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5.823] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 5.823] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:33:00.0/drm/card1
[ 5.844] (--) PCI:*(51@0:0:0) 1002:1681:17aa:50b4 rev 209, Mem @ 0x8e0000000/268435456, 0x8f0000000/2097152, 0x98900000/524288, I/O @ 0x00001000/256
[ 5.844] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.844] (II) LoadModule: "glx"
[ 5.844] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.847] (II) Module glx: vendor="X.Org Foundation"
[ 5.847] compiled for 1.21.1.16, module version = 1.0.0
[ 5.847] ABI class: X.Org Server Extension, version 10.0
[ 5.847] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 5.847] loading driver: amdgpu
[ 5.847] (==) Matched amdgpu as autoconfigured driver 0
[ 5.847] (==) Matched ati as autoconfigured driver 1
[ 5.847] (==) Matched modesetting as autoconfigured driver 2
[ 5.847] (==) Matched fbdev as autoconfigured driver 3
[ 5.847] (==) Matched vesa as autoconfigured driver 4
[ 5.847] (==) Assigned the driver to the xf86ConfigLayout
[ 5.847] (II) LoadModule: "amdgpu"
[ 5.848] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 5.849] (II) Module amdgpu: vendor="X.Org Foundation"
[ 5.849] compiled for 1.21.1.11, module version = 23.0.0
[ 5.849] Module class: X.Org Video Driver
[ 5.849] ABI class: X.Org Video Driver, version 25.2
[ 5.849] (II) LoadModule: "ati"
[ 5.849] (WW) Warning, couldn't open module ati
[ 5.849] (EE) Failed to load module "ati" (module does not exist, 0)
[ 5.849] (II) LoadModule: "modesetting"
[ 5.849] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.849] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.849] compiled for 1.21.1.16, module version = 1.21.1
[ 5.849] Module class: X.Org Video Driver
[ 5.849] ABI class: X.Org Video Driver, version 25.2
[ 5.849] (II) LoadModule: "fbdev"
[ 5.849] (WW) Warning, couldn't open module fbdev
[ 5.849] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5.849] (II) LoadModule: "vesa"
[ 5.849] (WW) Warning, couldn't open module vesa
[ 5.850] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5.850] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 5.850] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.859] (WW) Falling back to old probe method for modesetting
[ 5.859] (EE) open /dev/dri/card0: No such file or directory
[ 5.859] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.859] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 5.859] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 5.859] (==) AMDGPU(0): Default visual is TrueColor
[ 5.859] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[ 5.859] (==) AMDGPU(0): RGB weight 888
[ 5.859] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 5.859] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1681)
[ 5.859] (II) Loading sub module "fb"
[ 5.859] (II) LoadModule: "fb"
[ 5.859] (II) Module "fb" already built-in
[ 5.859] (II) Loading sub module "dri2"
[ 5.859] (II) LoadModule: "dri2"
[ 5.859] (II) Module "dri2" already built-in
[ 5.954] (II) Loading sub module "glamoregl"
[ 5.954] (II) LoadModule: "glamoregl"
[ 5.954] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.957] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.957] compiled for 1.21.1.16, module version = 1.0.1
[ 5.957] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.969] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, rembrandt, LLVM 19.1.7, DRM 3.61, 6.14.2-zen1-1-zen)
[ 5.969] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 5.969] (==) AMDGPU(0): TearFree property default: auto
[ 5.969] (==) AMDGPU(0): VariableRefresh: disabled
[ 5.969] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 5.969] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 5.970] (II) AMDGPU(0): Output eDP has no monitor section
[ 5.970] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-4 has no monitor section
[ 5.970] (II) AMDGPU(0): Output DisplayPort-5 has no monitor section
[ 5.973] (WW) AMDGPU(0): 8 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[ 5.974] (II) AMDGPU(0): EDID for output eDP
[ 5.974] (II) AMDGPU(0): Manufacturer: LEN Model: 403a Serial#: 0
[ 5.974] (II) AMDGPU(0): Year: 2021 Week: 0
[ 5.974] (II) AMDGPU(0): EDID Version: 1.4
[ 5.974] (II) AMDGPU(0): Digital Display Input
[ 5.974] (II) AMDGPU(0): 8 bits per channel
[ 5.974] (II) AMDGPU(0): Digital interface is DisplayPort
[ 5.974] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 5.974] (II) AMDGPU(0): Gamma: 2.20
[ 5.974] (II) AMDGPU(0): No DPMS capabilities specified
[ 5.974] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 5.974] (II) AMDGPU(0): Default color space is primary color space
[ 5.974] (II) AMDGPU(0): First detailed timing is preferred mode
[ 5.974] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 5.974] (II) AMDGPU(0): Display is continuous-frequency
[ 5.974] (II) AMDGPU(0): redX: 0.641 redY: 0.330 greenX: 0.291 greenY: 0.609
[ 5.974] (II) AMDGPU(0): blueX: 0.148 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 5.974] (II) AMDGPU(0): Manufacturer's mask: 0
[ 5.974] (II) AMDGPU(0): Supported detailed timing:
[ 5.974] (II) AMDGPU(0): clock: 154.1 MHz Image Size: 302 x 188 mm
[ 5.974] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5.974] (II) AMDGPU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 5.974] (II) AMDGPU(0): Ranges: V min: 40 V max: 60 Hz, H min: 74 H max: 74 kHz, PixClock max 165 MHz
[ 5.974] (II) AMDGPU(0): Unknown vendor-specific block f
[ 5.974] (II) AMDGPU(0): LP140WU1-SPB2
[ 5.974] (II) AMDGPU(0): EDID (in hex):
[ 5.974] (II) AMDGPU(0): 00ffffffffffff0030ae3a4000000000
[ 5.974] (II) AMDGPU(0): 001f0104a51e1378072815a4544a9c26
[ 5.974] (II) AMDGPU(0): 0e505400000001010101010101010101
[ 5.974] (II) AMDGPU(0): 010101010101353c80a070b023403020
[ 5.974] (II) AMDGPU(0): 36002ebc1000001a000000fd00283c4a
[ 5.974] (II) AMDGPU(0): 4a10010a2020202020200000000f00d1
[ 5.974] (II) AMDGPU(0): 0a3cd10a28280a0430e48206000000fe
[ 5.974] (II) AMDGPU(0): 004c503134305755312d535042320069
[ 5.974] (II) AMDGPU(0): Printing probed modes for output eDP
[ 5.974] (II) AMDGPU(0): Modeline "1920x1200"x60.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 5.974] (II) AMDGPU(0): Modeline "1920x1080"x60.0 154.13 1920 1968 2000 2080 1080 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1600x1200"x60.0 154.13 1600 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1680x1050"x60.0 154.13 1680 1968 2000 2080 1050 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1280x1024"x60.0 154.13 1280 1968 2000 2080 1024 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1440x900"x60.0 154.13 1440 1968 2000 2080 900 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1280x800"x60.0 154.13 1280 1968 2000 2080 800 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1280x720"x60.0 154.13 1280 1968 2000 2080 720 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "1024x768"x60.0 154.13 1024 1968 2000 2080 768 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "800x600"x60.0 154.13 800 1968 2000 2080 600 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): Modeline "640x480"x60.0 154.13 640 1968 2000 2080 480 1203 1209 1235 +hsync -vsync (74.1 kHz e)
[ 5.974] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-3
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-4
[ 5.974] (II) AMDGPU(0): EDID for output DisplayPort-5
[ 5.974] (II) AMDGPU(0): Output eDP connected
[ 5.974] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-3 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-4 disconnected
[ 5.974] (II) AMDGPU(0): Output DisplayPort-5 disconnected
[ 5.974] (II) AMDGPU(0): Using exact sizes for initial modes
[ 5.974] (II) AMDGPU(0): Output eDP using initial mode 1920x1200 +0+0
[ 5.974] (II) AMDGPU(0): mem size init: gart size :3c2d0f000 vram size: s:3df79000 visible:3df79000
[ 5.974] (==) AMDGPU(0): DPI set to (96, 96)
[ 5.974] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.974] (II) Loading sub module "ramdac"
[ 5.974] (II) LoadModule: "ramdac"
[ 5.974] (II) Module "ramdac" already built-in
[ 5.974] (II) UnloadModule: "modesetting"
[ 5.974] (II) Unloading modesetting
[ 5.974] (II) AMDGPU(0): [DRI2] Setup complete
[ 5.974] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 5.974] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 6.008] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[ 6.009] (II) AMDGPU(0): SYNC extension fences enabled
[ 6.009] (II) AMDGPU(0): Present extension enabled
[ 6.009] (==) AMDGPU(0): DRI3 enabled
[ 6.009] (==) AMDGPU(0): Backing store enabled
[ 6.009] (II) AMDGPU(0): Direct rendering enabled
[ 6.017] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 6.017] (II) AMDGPU(0): Acceleration enabled
[ 6.017] (==) AMDGPU(0): DPMS enabled
[ 6.017] (==) AMDGPU(0): Silken mouse enabled
[ 6.017] (II) AMDGPU(0): Set up textured video (glamor)
[ 6.023] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 6.023] (II) Initializing extension Generic Event Extension
[ 6.023] (II) Initializing extension SHAPE
[ 6.023] (II) Initializing extension MIT-SHM
[ 6.024] (II) Initializing extension XInputExtension
[ 6.024] (II) Initializing extension XTEST
[ 6.024] (II) Initializing extension BIG-REQUESTS
[ 6.024] (II) Initializing extension SYNC
[ 6.024] (II) Initializing extension XKEYBOARD
[ 6.024] (II) Initializing extension XC-MISC
[ 6.024] (II) Initializing extension SECURITY
[ 6.025] (II) Initializing extension XFIXES
[ 6.025] (II) Initializing extension RENDER
[ 6.025] (II) Initializing extension RANDR
[ 6.025] (II) Initializing extension COMPOSITE
[ 6.025] (II) Initializing extension DAMAGE
[ 6.025] (II) Initializing extension MIT-SCREEN-SAVER
[ 6.025] (II) Initializing extension DOUBLE-BUFFER
[ 6.025] (II) Initializing extension RECORD
[ 6.025] (II) Initializing extension DPMS
[ 6.025] (II) Initializing extension Present
[ 6.025] (II) Initializing extension DRI3
[ 6.025] (II) Initializing extension X-Resource
[ 6.025] (II) Initializing extension XVideo
[ 6.025] (II) Initializing extension XVideo-MotionCompensation
[ 6.025] (II) Initializing extension GLX
[ 6.031] (II) AIGLX: Loaded and initialized radeonsi
[ 6.031] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6.031] (II) Initializing extension XFree86-VidModeExtension
[ 6.031] (II) Initializing extension XFree86-DGA
[ 6.031] (II) Initializing extension XFree86-DRI
[ 6.031] (II) Initializing extension DRI2
[ 6.032] (II) AMDGPU(0): Setting screen physical size to 508 x 317
[ 6.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 6.110] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.110] (II) LoadModule: "libinput"
[ 6.110] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6.113] (II) Module libinput: vendor="X.Org Foundation"
[ 6.113] compiled for 1.21.1.13, module version = 1.5.0
[ 6.113] Module class: X.Org XInput Driver
[ 6.113] ABI class: X.Org XInput driver, version 24.4
[ 6.113] (II) Using input driver 'libinput' for 'Power Button'
[ 6.113] (**) Power Button: always reports core events
[ 6.113] (**) Option "Device" "/dev/input/event3"
[ 6.120] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.120] (II) event3 - Power Button: device is a keyboard
[ 6.120] (II) event3 - Power Button: device removed
[ 6.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 6.120] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.121] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 6.121] (II) event3 - Power Button: device is a keyboard
[ 6.121] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 6.121] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6.121] (II) Using input driver 'libinput' for 'Video Bus'
[ 6.121] (**) Video Bus: always reports core events
[ 6.121] (**) Option "Device" "/dev/input/event8"
[ 6.122] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 6.122] (II) event8 - Video Bus: device is a keyboard
[ 6.122] (II) event8 - Video Bus: device removed
[ 6.129] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:00/input/input10/event8"
[ 6.129] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6.130] (II) event8 - Video Bus: is tagged by udev as: Keyboard
[ 6.130] (II) event8 - Video Bus: device is a keyboard
[ 6.130] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6.130] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6.130] (II) Using input driver 'libinput' for 'Power Button'
[ 6.130] (**) Power Button: always reports core events
[ 6.130] (**) Option "Device" "/dev/input/event0"
[ 6.131] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.131] (II) event0 - Power Button: device is a keyboard
[ 6.131] (II) event0 - Power Button: device removed
[ 6.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 6.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6.131] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 6.132] (II) event0 - Power Button: device is a keyboard
[ 6.132] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 6.132] (II) No input driver specified, ignoring this device.
[ 6.132] (II) This device may have been added with another device file.
[ 6.132] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.132] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6.132] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6.132] (**) Sleep Button: always reports core events
[ 6.132] (**) Option "Device" "/dev/input/event2"
[ 6.133] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 6.133] (II) event2 - Sleep Button: device is a keyboard
[ 6.133] (II) event2 - Sleep Button: device removed
[ 6.133] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 6.133] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6.133] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 6.133] (II) event2 - Sleep Button: device is a keyboard
[ 6.134] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[ 6.134] (II) No input driver specified, ignoring this device.
[ 6.134] (II) This device may have been added with another device file.
[ 6.134] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event11)
[ 6.134] (II) No input driver specified, ignoring this device.
[ 6.134] (II) This device may have been added with another device file.
[ 6.134] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 6.134] (II) No input driver specified, ignoring this device.
[ 6.134] (II) This device may have been added with another device file.
[ 6.135] (II) config/udev: Adding input device Microsoft Microsoft® Classic IntelliMouse® (/dev/input/event5)
[ 6.135] (**) Microsoft Microsoft® Classic IntelliMouse®: Applying InputClass "libinput pointer catchall"
[ 6.135] (II) Using input driver 'libinput' for 'Microsoft Microsoft® Classic IntelliMouse®'
[ 6.135] (**) Microsoft Microsoft® Classic IntelliMouse®: always reports core events
[ 6.135] (**) Option "Device" "/dev/input/event5"
[ 6.187] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: is tagged by udev as: Mouse
[ 6.187] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device set to 3200 DPI
[ 6.187] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device is a pointer
[ 6.187] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device removed
[ 6.205] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.205] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.205] (II) libinput: Microsoft Microsoft® Classic IntelliMouse®: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.205] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:33:00.4/usb3/3-2/3-2:1.0/0003:045E:0823.0001/input/input5/event5"
[ 6.205] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Classic IntelliMouse®" (type: MOUSE, id 10)
[ 6.205] (**) Option "AccelerationScheme" "none"
[ 6.205] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) selected scheme none/0
[ 6.205] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) acceleration factor: 2.000
[ 6.205] (**) Microsoft Microsoft® Classic IntelliMouse®: (accel) acceleration threshold: 4
[ 6.258] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: is tagged by udev as: Mouse
[ 6.258] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device set to 3200 DPI
[ 6.258] (II) event5 - Microsoft Microsoft® Classic IntelliMouse®: device is a pointer
[ 6.259] (II) config/udev: Adding input device Microsoft Microsoft® Classic IntelliMouse® (/dev/input/mouse0)
[ 6.259] (II) No input driver specified, ignoring this device.
[ 6.259] (II) This device may have been added with another device file.
[ 6.259] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event13)
[ 6.259] (II) No input driver specified, ignoring this device.
[ 6.259] (II) This device may have been added with another device file.
[ 6.259] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event14)
[ 6.259] (II) No input driver specified, ignoring this device.
[ 6.259] (II) This device may have been added with another device file.
[ 6.259] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Mouse (/dev/input/event7)
[ 6.259] (**) SYNA8018:00 06CB:CE67 Mouse: Applying InputClass "libinput pointer catchall"
[ 6.259] (II) Using input driver 'libinput' for 'SYNA8018:00 06CB:CE67 Mouse'
[ 6.259] (**) SYNA8018:00 06CB:CE67 Mouse: always reports core events
[ 6.260] (**) Option "Device" "/dev/input/event7"
[ 6.260] (II) event7 - SYNA8018:00 06CB:CE67 Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.260] (II) event7 - SYNA8018:00 06CB:CE67 Mouse: device is a pointer
[ 6.261] (II) event7 - SYNA8018:00 06CB:CE67 Mouse: device removed
[ 6.284] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.284] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.284] (II) libinput: SYNA8018:00 06CB:CE67 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.284] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-SYNA8018:00/0018:06CB:CE67.0003/input/input12/event7"
[ 6.284] (II) XINPUT: Adding extended input device "SYNA8018:00 06CB:CE67 Mouse" (type: MOUSE, id 11)
[ 6.284] (**) Option "AccelerationScheme" "none"
[ 6.284] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) selected scheme none/0
[ 6.284] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) acceleration factor: 2.000
[ 6.284] (**) SYNA8018:00 06CB:CE67 Mouse: (accel) acceleration threshold: 4
[ 6.284] (II) event7 - SYNA8018:00 06CB:CE67 Mouse: is tagged by udev as: Mouse Pointingstick
[ 6.285] (II) event7 - SYNA8018:00 06CB:CE67 Mouse: device is a pointer
[ 6.285] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Mouse (/dev/input/mouse1)
[ 6.285] (II) No input driver specified, ignoring this device.
[ 6.285] (II) This device may have been added with another device file.
[ 6.286] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Touchpad (/dev/input/event9)
[ 6.286] (**) SYNA8018:00 06CB:CE67 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 6.286] (II) Using input driver 'libinput' for 'SYNA8018:00 06CB:CE67 Touchpad'
[ 6.286] (**) SYNA8018:00 06CB:CE67 Touchpad: always reports core events
[ 6.286] (**) Option "Device" "/dev/input/event9"
[ 6.286] (II) event9 - SYNA8018:00 06CB:CE67 Touchpad: is tagged by udev as: Touchpad
[ 6.287] (II) event9 - SYNA8018:00 06CB:CE67 Touchpad: device is a touchpad
[ 6.287] (II) event9 - SYNA8018:00 06CB:CE67 Touchpad: device removed
[ 6.310] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.310] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.310] (II) libinput: SYNA8018:00 06CB:CE67 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 6.311] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-1/i2c-SYNA8018:00/0018:06CB:CE67.0003/input/input13/event9"
[ 6.311] (II) XINPUT: Adding extended input device "SYNA8018:00 06CB:CE67 Touchpad" (type: TOUCHPAD, id 12)
[ 6.312] (**) Option "AccelerationScheme" "none"
[ 6.312] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) selected scheme none/0
[ 6.312] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) acceleration factor: 2.000
[ 6.312] (**) SYNA8018:00 06CB:CE67 Touchpad: (accel) acceleration threshold: 4
[ 6.313] (II) event9 - SYNA8018:00 06CB:CE67 Touchpad: is tagged by udev as: Touchpad
[ 6.314] (II) event9 - SYNA8018:00 06CB:CE67 Touchpad: device is a touchpad
[ 6.315] (II) config/udev: Adding input device SYNA8018:00 06CB:CE67 Touchpad (/dev/input/mouse2)
[ 6.315] (II) No input driver specified, ignoring this device.
[ 6.315] (II) This device may have been added with another device file.
[ 6.315] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 6.315] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 6.315] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 6.315] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.315] (**) Option "Device" "/dev/input/event4"
[ 6.316] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.316] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.317] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 6.317] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 6.317] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 6.318] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 6.318] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 6.320] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 6.320] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 6.320] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 6.320] (**) ThinkPad Extra Buttons: always reports core events
[ 6.320] (**) Option "Device" "/dev/input/event6"
[ 6.320] (II) event6 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 6.320] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 6.321] (II) event6 - ThinkPad Extra Buttons: device removed
[ 6.321] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input11/event6"
[ 6.321] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 6.321] (II) event6 - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[ 6.321] (II) event6 - ThinkPad Extra Buttons: device is a keyboard
[ 32.108] (II) AMDGPU(0): EDID vendor "LEN", prod id 16442
[ 32.108] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 32.108] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 32.108] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 32.108] (II) AMDGPU(0): Modeline "1920x1200"x0.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 32.110] (II) AMDGPU(0): EDID vendor "LEN", prod id 16442
[ 32.110] (II) AMDGPU(0): Using hsync ranges from config file
[ 32.110] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 32.110] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 32.110] (II) AMDGPU(0): Modeline "1920x1200"x0.0 154.13 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.1 kHz eP)
[ 32.156] (II) AMDGPU(0): Allocate new frame buffer 2866x1791
[ 32.157] (II) AMDGPU(0): => pitch 11776 bytes
[ 32.492] (II) AMDGPU(0): Allocate new frame buffer 2866x1792
[ 32.493] (II) AMDGPU(0): => pitch 11776 bytesLast edited by questionask (2025-04-13 12:24:10)
Offline
#6 2025-04-13 13:46:02
- seth
- Member
- Registered: 2012-09-03
- Posts: 65,272
Re: Xfce black screen for a few seconds after booting
If you restart network-manager-applet, does it still take some seconds to show up and/or issue some warnings/errors on the console?
And if you prevent it from automatically starting (or uninstall it) does that have any impact on the black screen situation?
Or does it help to add "amdgpu.dcdebugmask=0x10" to the https://wiki.archlinux.org/title/Kernel_parameters (disables PSR; though you get a mouse cursor and that speaks against it being a panel refresh related error)
Offline
#7 2025-04-13 21:22:43
- seth
- Member
- Registered: 2012-09-03
- Posts: 65,272
Re: Xfce black screen for a few seconds after booting
Offline