You are not logged in.
- Topics: Active | Unanswered
#1 2025-04-26 13:07:08
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
[SOLVED] Installed amd-ucode on intel cpu, no monitor signal
tldr: try removing some weird modprobe amdgpu options and make sure they're deleted
It's my first time posting on Arch forums!
The title kinda says it all. I had a problem with a GPU I upgraded to (OS was sometimes crashing, a topic for another topic) so in an attempt to fix it I installed amd-ucode, thinking it would update the GPU microcode or something, but instead nothing gets sent to the monitor after GRUB window, where display manager should display (shows "no signal" and goes to power saving). I ssh'd via my phone and removed amd-ucode. After a reboot there is still no signal. I tried reinstalling and removing it again, running mkinitcpio, reinstalling everything on /boot, installing linux-lts (no entry in grub, even though it's in grub-mkconfig??), trying to fix everything that looks weird in dmesg (some errors are left because searching them says it's okay) and probably some other things i don't remember because i was trying to fix it for over two weeks now without any progress...
I have a Genuine Intel(R) CPU 0000 (??) and a AMD Radeon RX 6700 XT gpu
Here's the output of dmesg:
[ 0.000000] Linux version 6.14.3-arch1-1 (linux@archlinux) (gcc (GCC) 14.2.1 20250207, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Sun, 20 Apr 2025 12:38:52 +0000
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b471e54d-afa4-46fa-8a18-ecbda1c74493 rw loglevel=3 quiet radeon.cik_support=0 amdgpu.cik_support=0 radeon.si_support=0 amdgpu.si_support=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000841aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000841af000-0x00000000841affff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000841b0000-0x00000000841b0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000841b1000-0x000000008ce41fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ce42000-0x000000008e5e4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e5e5000-0x000000008e628fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008e629000-0x000000008eddafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008eddb000-0x000000008f6a1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f6a2000-0x000000008f6fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f700000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x7faf2018-0x7fb0fc57] usable ==> usable
[ 0.000000] e820: update [mem 0x7fae1018-0x7faf1c57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007fae1017] usable
[ 0.000000] reserve setup_data: [mem 0x000000007fae1018-0x000000007faf1c57] usable
[ 0.000000] reserve setup_data: [mem 0x000000007faf1c58-0x000000007faf2017] usable
[ 0.000000] reserve setup_data: [mem 0x000000007faf2018-0x000000007fb0fc57] usable
[ 0.000000] reserve setup_data: [mem 0x000000007fb0fc58-0x00000000841aefff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000841af000-0x00000000841affff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000841b0000-0x00000000841b0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000841b1000-0x000000008ce41fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008ce42000-0x000000008e5e4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008e5e5000-0x000000008e628fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000008e629000-0x000000008eddafff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008eddb000-0x000000008f6a1fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000008f6a2000-0x000000008f6fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000008f700000-0x000000008fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000086fffffff] usable
[ 0.000000] efi: EFI v2.5 by American Megatrends
[ 0.000000] efi: ESRT=0x8f5acd98 ACPI=0x8e5f2000 ACPI 2.0=0x8e5f2000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 INITRD=0x842b2f98
[ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/MAXIMUS VIII HERO, BIOS 3802 03/15/2018
[ 0.000000] DMI: Memory slots populated: 2/4
[ 0.000000] tsc: Detected 2100.000 MHz processor
[ 0.000000] tsc: Detected 2099.944 MHz TSC
[ 0.000844] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000848] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000863] last_pfn = 0x870000 max_arch_pfn = 0x400000000
[ 0.000869] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs
[ 0.000871] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001389] last_pfn = 0x8f700 max_arch_pfn = 0x400000000
[ 0.011673] found SMP MP-table at [mem 0x000fccc0-0x000fcccf]
[ 0.011692] esrt: Reserving ESRT space from 0x000000008f5acd98 to 0x000000008f5acdd0.
[ 0.011701] Using GB pages for direct mapping
[ 0.012875] Secure boot disabled
[ 0.012876] RAMDISK: [mem 0x7fb10000-0x82010fff]
[ 0.013117] ACPI: Early table checksum verification disabled
[ 0.013120] ACPI: RSDP 0x000000008E5F2000 000024 (v02 ALASKA)
[ 0.013125] ACPI: XSDT 0x000000008E5F20A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013132] ACPI: FACP 0x000000008E61C980 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.013139] ACPI: DSDT 0x000000008E5F2200 02A77F (v02 ALASKA A M I 01072009 INTL 20161222)
[ 0.013143] ACPI: FACS 0x000000008EDDAC40 000040
[ 0.013146] ACPI: APIC 0x000000008E61CA98 00012C (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.013150] ACPI: FPDT 0x000000008E61CBC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013153] ACPI: BGRT 0x000000008E627ED8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013157] ACPI: MCFG 0x000000008E61CC68 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.013161] ACPI: SSDT 0x000000008E61CCA8 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.013164] ACPI: FIDT 0x000000008E61D038 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.013168] ACPI: SSDT 0x000000008E61D0D8 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.013172] ACPI: SSDT 0x000000008E620230 00253E (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.013176] ACPI: HPET 0x000000008E622770 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.013180] ACPI: SSDT 0x000000008E6227A8 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
[ 0.013183] ACPI: SSDT 0x000000008E6227D0 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ 0.013187] ACPI: UEFI 0x000000008E6232E8 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.013191] ACPI: SSDT 0x000000008E623330 0017AD (v02 CpuRef CpuSsdt 00003000 INTL 20161222)
[ 0.013194] ACPI: LPIT 0x000000008E624AE0 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.013198] ACPI: WSMT 0x000000008E624B78 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.013201] ACPI: SSDT 0x000000008E624BA0 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.013205] ACPI: SSDT 0x000000008E624E40 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.013209] ACPI: DBGP 0x000000008E627E48 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.013212] ACPI: DBG2 0x000000008E627E80 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.013215] ACPI: Reserving FACP table memory at [mem 0x8e61c980-0x8e61ca93]
[ 0.013217] ACPI: Reserving DSDT table memory at [mem 0x8e5f2200-0x8e61c97e]
[ 0.013219] ACPI: Reserving FACS table memory at [mem 0x8eddac40-0x8eddac7f]
[ 0.013220] ACPI: Reserving APIC table memory at [mem 0x8e61ca98-0x8e61cbc3]
[ 0.013221] ACPI: Reserving FPDT table memory at [mem 0x8e61cbc8-0x8e61cc0b]
[ 0.013222] ACPI: Reserving BGRT table memory at [mem 0x8e627ed8-0x8e627f0f]
[ 0.013223] ACPI: Reserving MCFG table memory at [mem 0x8e61cc68-0x8e61cca3]
[ 0.013224] ACPI: Reserving SSDT table memory at [mem 0x8e61cca8-0x8e61d037]
[ 0.013225] ACPI: Reserving FIDT table memory at [mem 0x8e61d038-0x8e61d0d3]
[ 0.013226] ACPI: Reserving SSDT table memory at [mem 0x8e61d0d8-0x8e62022b]
[ 0.013227] ACPI: Reserving SSDT table memory at [mem 0x8e620230-0x8e62276d]
[ 0.013229] ACPI: Reserving HPET table memory at [mem 0x8e622770-0x8e6227a7]
[ 0.013230] ACPI: Reserving SSDT table memory at [mem 0x8e6227a8-0x8e6227cb]
[ 0.013231] ACPI: Reserving SSDT table memory at [mem 0x8e6227d0-0x8e6232e2]
[ 0.013232] ACPI: Reserving UEFI table memory at [mem 0x8e6232e8-0x8e623329]
[ 0.013233] ACPI: Reserving SSDT table memory at [mem 0x8e623330-0x8e624adc]
[ 0.013234] ACPI: Reserving LPIT table memory at [mem 0x8e624ae0-0x8e624b73]
[ 0.013235] ACPI: Reserving WSMT table memory at [mem 0x8e624b78-0x8e624b9f]
[ 0.013236] ACPI: Reserving SSDT table memory at [mem 0x8e624ba0-0x8e624e3e]
[ 0.013237] ACPI: Reserving SSDT table memory at [mem 0x8e624e40-0x8e627e41]
[ 0.013238] ACPI: Reserving DBGP table memory at [mem 0x8e627e48-0x8e627e7b]
[ 0.013239] ACPI: Reserving DBG2 table memory at [mem 0x8e627e80-0x8e627ed3]
[ 0.013348] No NUMA configuration found
[ 0.013349] Faking a node at [mem 0x0000000000000000-0x000000086fffffff]
[ 0.013363] NODE_DATA(0) allocated [mem 0x86ffd52c0-0x86fffffff]
[ 0.013753] Zone ranges:
[ 0.013753] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013756] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013758] Normal [mem 0x0000000100000000-0x000000086fffffff]
[ 0.013760] Device empty
[ 0.013761] Movable zone start for each node
[ 0.013764] Early memory node ranges
[ 0.013765] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.013767] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.013768] node 0: [mem 0x0000000000100000-0x00000000841aefff]
[ 0.013770] node 0: [mem 0x00000000841b1000-0x000000008ce41fff]
[ 0.013771] node 0: [mem 0x000000008f6a2000-0x000000008f6fffff]
[ 0.013772] node 0: [mem 0x0000000100000000-0x000000086fffffff]
[ 0.013779] Initmem setup node 0 [mem 0x0000000000001000-0x000000086fffffff]
[ 0.013785] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013787] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.013815] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.017534] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.017694] On node 0, zone DMA32: 10336 pages in unavailable ranges
[ 0.068750] On node 0, zone Normal: 2304 pages in unavailable ranges
[ 0.068997] ACPI: PM-Timer IO Port: 0x1808
[ 0.069009] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.069011] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.069012] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.069013] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.069014] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.069015] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.069016] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.069017] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.069018] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.069019] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.069020] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.069021] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.069022] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.069023] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.069024] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.069025] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ 0.069052] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.069056] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.069058] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.069064] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.069065] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.069073] e820: update [mem 0x895d2000-0x89782fff] usable ==> reserved
[ 0.069092] TSC deadline timer available
[ 0.069099] CPU topo: Max. logical packages: 1
[ 0.069100] CPU topo: Max. logical dies: 1
[ 0.069101] CPU topo: Max. dies per package: 1
[ 0.069107] CPU topo: Max. threads per core: 2
[ 0.069108] CPU topo: Num. cores per package: 8
[ 0.069109] CPU topo: Num. threads per package: 16
[ 0.069110] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[ 0.069134] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.069137] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.069139] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.069142] PM: hibernation: Registered nosave memory: [mem 0x841af000-0x841b0fff]
[ 0.069144] PM: hibernation: Registered nosave memory: [mem 0x895d2000-0x89782fff]
[ 0.069146] PM: hibernation: Registered nosave memory: [mem 0x8ce42000-0x8f6a1fff]
[ 0.069149] PM: hibernation: Registered nosave memory: [mem 0x8f700000-0xffffffff]
[ 0.069150] [mem 0x90000000-0xfdffffff] available for PCI devices
[ 0.069152] Booting paravirtualized kernel on bare hardware
[ 0.069154] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.079154] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.080233] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
[ 0.080243] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
[ 0.080247] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.080254] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
[ 0.080282] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b471e54d-afa4-46fa-8a18-ecbda1c74493 rw loglevel=3 quiet radeon.cik_support=0 amdgpu.cik_support=0 radeon.si_support=0 amdgpu.si_support=1
[ 0.080460] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux", will be passed to user space.
[ 0.080495] random: crng init done
[ 0.080496] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.083456] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.084940] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.085202] Fallback order for Node 0: 0
[ 0.085207] Built 1 zonelists, mobility grouping on. Total pages: 8375867
[ 0.085208] Policy zone: Normal
[ 0.085434] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.085439] software IO TLB: area num 16.
[ 0.183572] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.183635] ftrace: allocating 55513 entries in 217 pages
[ 0.215295] ftrace: allocated 217 pages with 5 groups
[ 0.215409] Dynamic Preempt: full
[ 0.215505] rcu: Preemptible hierarchical RCU implementation.
[ 0.215506] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.215507] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.215509] Trampoline variant of Tasks RCU enabled.
[ 0.215509] Rude variant of Tasks RCU enabled.
[ 0.215510] Tracing variant of Tasks RCU enabled.
[ 0.215511] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.215512] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.215526] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.215529] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.215531] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[ 0.224288] NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
[ 0.224543] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.224799] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.224849] Console: colour dummy device 80x25
[ 0.224852] printk: legacy console [tty0] enabled
[ 0.224926] ACPI: Core revision 20240827
[ 0.225214] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.225285] APIC: Switch to symmetric I/O mode setup
[ 0.226670] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.231040] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.235314] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e44fb6c2ab, max_idle_ns: 440795206594 ns
[ 0.235321] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.88 BogoMIPS (lpj=2099944)
[ 0.235348] x86/cpu: SGX disabled or unsupported by BIOS.
[ 0.235354] CPU0: Thermal monitoring enabled (TM1)
[ 0.235441] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.235443] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[ 0.235448] process: using mwait in idle threads
[ 0.235451] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.235454] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[ 0.235455] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.235456] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.235457] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.235459] RETBleed: Mitigation: Enhanced IBRS
[ 0.235461] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.235463] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.235469] TAA: Mitigation: TSX disabled
[ 0.235471] MMIO Stale Data: Mitigation: Clear CPU buffers
[ 0.235475] SRBDS: Mitigation: Microcode
[ 0.235482] GDS: Mitigation: Microcode
[ 0.235488] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.235490] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.235492] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.235493] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.235494] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.235496] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.235498] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.235500] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.235501] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.272769] Freeing SMP alternatives memory: 48K
[ 0.272774] pid_max: default: 32768 minimum: 301
[ 0.278031] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.278111] landlock: Up and running.
[ 0.278114] Yama: becoming mindful.
[ 0.278345] LSM support for eBPF active
[ 0.278420] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.278463] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.279391] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 2.10GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[ 0.280576] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.280605] ... version: 4
[ 0.280606] ... bit width: 48
[ 0.280607] ... generic registers: 4
[ 0.280608] ... value mask: 0000ffffffffffff
[ 0.280610] ... max period: 00007fffffffffff
[ 0.280611] ... fixed-purpose events: 3
[ 0.280612] ... event mask: 000000070000000f
[ 0.280760] signal: max sigframe size: 2032
[ 0.280776] Estimated ratio of average max frequency by base frequency (times 1024): 2340
[ 0.280854] rcu: Hierarchical SRCU implementation.
[ 0.280855] rcu: Max phase no-delay instances is 400.
[ 0.280935] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.282064] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.282217] smp: Bringing up secondary CPUs ...
[ 0.283382] smpboot: x86: Booting SMP configuration:
[ 0.283384] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.293761] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[ 0.295373] smp: Brought up 1 node, 16 CPUs
[ 0.295373] smpboot: Total of 16 processors activated (67198.20 BogoMIPS)
[ 0.296476] Memory: 32737348K/33503468K available (19197K kernel code, 2903K rwdata, 16272K rodata, 4528K init, 4964K bss, 742488K reserved, 0K cma-reserved)
[ 0.297378] devtmpfs: initialized
[ 0.297378] x86/mm: Memory block size: 128MB
[ 0.300592] ACPI: PM: Registering ACPI NVS region [mem 0x841af000-0x841affff] (4096 bytes)
[ 0.300592] ACPI: PM: Registering ACPI NVS region [mem 0x8e629000-0x8eddafff] (8069120 bytes)
[ 0.300592] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.300592] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.300644] pinctrl core: initialized pinctrl subsystem
[ 0.300851] PM: RTC time: 12:01:25, date: 2025-04-26
[ 0.301774] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.302303] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.302619] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.302938] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.302948] audit: initializing netlink subsys (disabled)
[ 0.302958] audit: type=2000 audit(1745668885.074:1): state=initialized audit_enabled=0 res=1
[ 0.302958] thermal_sys: Registered thermal governor 'fair_share'
[ 0.302958] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.302958] thermal_sys: Registered thermal governor 'step_wise'
[ 0.302958] thermal_sys: Registered thermal governor 'user_space'
[ 0.302958] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.302958] cpuidle: using governor ladder
[ 0.302958] cpuidle: using governor menu
[ 0.303337] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.303340] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.303453] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[ 0.303468] PCI: Using configuration type 1 for base access
[ 0.303644] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.308362] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.308362] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.308362] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.308362] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.308468] raid6: skipped pq benchmark and selected avx2x4
[ 0.308468] raid6: using avx2x2 recovery algorithm
[ 0.308468] ACPI: Added _OSI(Module Device)
[ 0.308468] ACPI: Added _OSI(Processor Device)
[ 0.308468] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.308468] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.362900] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.365974] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.372178] ACPI: Dynamic OEM Table Load:
[ 0.372178] ACPI: SSDT 0xFFFFA0A040EDD800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.372758] ACPI: Dynamic OEM Table Load:
[ 0.372765] ACPI: SSDT 0xFFFFA0A040ED1000 000549 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.374170] ACPI: Dynamic OEM Table Load:
[ 0.374176] ACPI: SSDT 0xFFFFA0A041F6CA00 0001A8 (v02 PmRef Cpu0Hwp 00003000 INTL 20161222)
[ 0.375338] ACPI: Dynamic OEM Table Load:
[ 0.375344] ACPI: SSDT 0xFFFFA0A040ED6000 000628 (v02 PmRef HwpLvt 00003000 INTL 20161222)
[ 0.377234] ACPI: Dynamic OEM Table Load:
[ 0.377243] ACPI: SSDT 0xFFFFA0A040EE3000 000D14 (v02 PmRef ApIst 00003000 INTL 20161222)
[ 0.379378] ACPI: Dynamic OEM Table Load:
[ 0.379384] ACPI: SSDT 0xFFFFA0A040EDE000 000317 (v02 PmRef ApHwp 00003000 INTL 20161222)
[ 0.380695] ACPI: Dynamic OEM Table Load:
[ 0.380701] ACPI: SSDT 0xFFFFA0A040EDF400 00030A (v02 PmRef ApCst 00003000 INTL 20161222)
[ 0.393826] ACPI: EC: EC started
[ 0.393828] ACPI: EC: interrupt blocked
[ 0.394628] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.394632] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.394634] ACPI: Interpreter enabled
[ 0.394687] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.394689] ACPI: Using IOAPIC for interrupt routing
[ 0.396298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.396300] PCI: Using E820 reservations for host bridge windows
[ 0.397781] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.402839] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ 0.403301] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ 0.403754] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ 0.406743] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource
[ 0.407218] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource
[ 0.407703] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource
[ 0.408174] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource
[ 0.408655] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource
[ 0.409134] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource
[ 0.409611] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource
[ 0.410083] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource
[ 0.410554] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource
[ 0.411019] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource
[ 0.411489] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource
[ 0.411956] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource
[ 0.412433] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[ 0.412901] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource
[ 0.413368] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource
[ 0.413835] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource
[ 0.414303] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource
[ 0.416307] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource
[ 0.416775] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource
[ 0.417242] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource
[ 0.446460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.446470] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.446524] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.446527] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.446529] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.448209] PCI host bridge to bus 0000:00
[ 0.448215] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.448219] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.448221] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.448223] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.448225] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.448227] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.448352] pci 0000:00:00.0: [8086:3e20] type 00 class 0x060000 conventional PCI endpoint
[ 0.448449] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[ 0.448464] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.448467] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.448471] pci 0000:00:01.0: bridge window [mem 0xdf900000-0xdfbfffff]
[ 0.448477] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.448512] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.449074] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.449114] pci 0000:00:14.0: BAR 0 [mem 0xdff30000-0xdff3ffff 64bit]
[ 0.449156] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.450161] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 conventional PCI endpoint
[ 0.450197] pci 0000:00:17.0: BAR 0 [mem 0xdff48000-0xdff49fff]
[ 0.450200] pci 0000:00:17.0: BAR 1 [mem 0xdff4c000-0xdff4c0ff]
[ 0.450203] pci 0000:00:17.0: BAR 2 [io 0xf050-0xf057]
[ 0.450205] pci 0000:00:17.0: BAR 3 [io 0xf040-0xf043]
[ 0.450208] pci 0000:00:17.0: BAR 4 [io 0xf020-0xf03f]
[ 0.450210] pci 0000:00:17.0: BAR 5 [mem 0xdff4b000-0xdff4b7ff]
[ 0.450248] pci 0000:00:17.0: PME# supported from D3hot
[ 0.450683] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 PCIe Root Port
[ 0.450705] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.450763] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.451517] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400 PCIe Root Port
[ 0.451538] pci 0000:00:1b.3: PCI bridge to [bus 05]
[ 0.451543] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff]
[ 0.451546] pci 0000:00:1b.3: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.451608] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[ 0.452375] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 PCIe Root Port
[ 0.452396] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.452402] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.452463] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.453235] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 PCIe Root Port
[ 0.453256] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.453262] pci 0000:00:1d.0: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.453324] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.454096] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100 conventional PCI endpoint
[ 0.454569] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 conventional PCI endpoint
[ 0.454612] pci 0000:00:1f.2: BAR 0 [mem 0xdff44000-0xdff47fff]
[ 0.454987] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 conventional PCI endpoint
[ 0.455038] pci 0000:00:1f.3: BAR 0 [mem 0xdff40000-0xdff43fff 64bit]
[ 0.455045] pci 0000:00:1f.3: BAR 4 [mem 0xdff20000-0xdff2ffff 64bit]
[ 0.455090] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.456075] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.456207] pci 0000:00:1f.4: BAR 0 [mem 0xdff4a000-0xdff4a0ff 64bit]
[ 0.456218] pci 0000:00:1f.4: BAR 4 [io 0xf000-0xf01f]
[ 0.456624] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 conventional PCI endpoint
[ 0.456680] pci 0000:00:1f.6: BAR 0 [mem 0xdff00000-0xdff1ffff]
[ 0.456743] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.457151] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.457173] pci 0000:01:00.0: BAR 0 [mem 0xdfb00000-0xdfb03fff]
[ 0.457178] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.457184] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.457188] pci 0000:01:00.0: bridge window [mem 0xdf900000-0xdfafffff]
[ 0.457197] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.457278] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.457334] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.457453] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.457506] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.457529] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.457535] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
[ 0.457539] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdfafffff]
[ 0.457548] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.457629] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.457774] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.457832] pci 0000:03:00.0: [1002:73df] type 00 class 0x030000 PCIe Legacy Endpoint
[ 0.457867] pci 0000:03:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.457871] pci 0000:03:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.457874] pci 0000:03:00.0: BAR 4 [io 0xe000-0xe0ff]
[ 0.457876] pci 0000:03:00.0: BAR 5 [mem 0xdf900000-0xdf9fffff]
[ 0.457879] pci 0000:03:00.0: ROM [mem 0xdfa00000-0xdfa1ffff pref]
[ 0.457917] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.457971] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.458037] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[ 0.458127] pci 0000:03:00.1: [1002:ab28] type 00 class 0x040300 PCIe Legacy Endpoint
[ 0.458161] pci 0000:03:00.1: BAR 0 [mem 0xdfa20000-0xdfa23fff]
[ 0.458226] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.458333] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.458449] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.458562] pci 0000:05:00.0: [1b21:0612] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.458612] pci 0000:05:00.0: BAR 0 [io 0xd050-0xd057]
[ 0.458615] pci 0000:05:00.0: BAR 1 [io 0xd040-0xd043]
[ 0.458618] pci 0000:05:00.0: BAR 2 [io 0xd030-0xd037]
[ 0.458620] pci 0000:05:00.0: BAR 3 [io 0xd020-0xd023]
[ 0.458623] pci 0000:05:00.0: BAR 4 [io 0xd000-0xd01f]
[ 0.458626] pci 0000:05:00.0: BAR 5 [mem 0xdfe00000-0xdfe001ff]
[ 0.459177] pci 0000:00:1b.3: PCI bridge to [bus 05]
[ 0.459296] pci 0000:06:00.0: [1b21:1242] type 00 class 0x0c0330 PCIe Endpoint
[ 0.459351] pci 0000:06:00.0: BAR 0 [mem 0xdfd00000-0xdfd07fff 64bit]
[ 0.459367] pci 0000:06:00.0: enabling Extended Tags
[ 0.459455] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.460021] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.460140] pci 0000:07:00.0: [126f:2263] type 00 class 0x010802 PCIe Endpoint
[ 0.460193] pci 0000:07:00.0: BAR 0 [mem 0xdfc00000-0xdfc03fff 64bit]
[ 0.460836] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.464232] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.464300] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.464368] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.464434] ACPI: PCI: Interrupt link LNKD configured for IRQ 15
[ 0.464497] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.464560] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.464622] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.464685] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.472018] ACPI: EC: interrupt unblocked
[ 0.472021] ACPI: EC: event unblocked
[ 0.472026] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.472028] ACPI: EC: GPE=0x16
[ 0.472030] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[ 0.472033] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[ 0.472109] iommu: Default domain type: Translated
[ 0.472109] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.472109] SCSI subsystem initialized
[ 0.472331] libata version 3.00 loaded.
[ 0.472334] ACPI: bus type USB registered
[ 0.472347] usbcore: registered new interface driver usbfs
[ 0.472353] usbcore: registered new interface driver hub
[ 0.472363] usbcore: registered new device driver usb
[ 0.472393] EDAC MC: Ver: 3.0.0
[ 0.472661] efivars: Registered efivars operations
[ 0.472661] NetLabel: Initializing
[ 0.472661] NetLabel: domain hash size = 128
[ 0.472661] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.472661] NetLabel: unlabeled traffic allowed by default
[ 0.472661] mctp: management component transport protocol core
[ 0.472661] NET: Registered PF_MCTP protocol family
[ 0.472661] PCI: Using ACPI for IRQ routing
[ 0.500948] PCI: pci_cache_line_size set to 64 bytes
[ 0.501000] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.501014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.501016] e820: reserve RAM buffer [mem 0x7fae1018-0x7fffffff]
[ 0.501018] e820: reserve RAM buffer [mem 0x7faf2018-0x7fffffff]
[ 0.501019] e820: reserve RAM buffer [mem 0x841af000-0x87ffffff]
[ 0.501021] e820: reserve RAM buffer [mem 0x895d2000-0x8bffffff]
[ 0.501022] e820: reserve RAM buffer [mem 0x8ce42000-0x8fffffff]
[ 0.501024] e820: reserve RAM buffer [mem 0x8f700000-0x8fffffff]
[ 0.501082] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[ 0.501082] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.501082] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.501082] vgaarb: loaded
[ 0.501381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.501390] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.503374] clocksource: Switched to clocksource tsc-early
[ 0.504092] VFS: Disk quotas dquot_6.6.0
[ 0.504106] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504157] pnp: PnP ACPI init
[ 0.504449] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.504779] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.504783] system 00:01: [io 0xffff] has been reserved
[ 0.504785] system 00:01: [io 0xffff] has been reserved
[ 0.504787] system 00:01: [io 0xffff] has been reserved
[ 0.504789] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.504791] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.504918] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.504985] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.505292] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.505296] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.505298] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.505300] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.505302] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.505305] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.505307] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.505309] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.505311] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.505315] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.505373] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.505376] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.505378] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.505381] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.505383] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.505385] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.505388] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.505390] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.505392] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.505395] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.505844] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.507526] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.507530] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.507533] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.508761] pnp: PnP ACPI: found 9 devices
[ 0.514667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.514744] NET: Registered PF_INET protocol family
[ 0.514924] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.536556] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.536601] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.536768] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.537214] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.537547] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.537695] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.537866] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.538074] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.538255] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.538264] NET: Registered PF_XDP protocol family
[ 0.538278] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.538283] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
[ 0.538289] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdfafffff]
[ 0.538293] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538298] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[ 0.538301] pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
[ 0.538305] pci 0000:01:00.0: bridge window [mem 0xdf900000-0xdfafffff]
[ 0.538309] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538314] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[ 0.538316] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.538319] pci 0000:00:01.0: bridge window [mem 0xdf900000-0xdfbfffff]
[ 0.538322] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538326] pci 0000:00:1b.0: PCI bridge to [bus 04]
[ 0.538335] pci 0000:00:1b.3: PCI bridge to [bus 05]
[ 0.538337] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff]
[ 0.538341] pci 0000:00:1b.3: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.538347] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.538351] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.538357] pci 0000:00:1d.0: PCI bridge to [bus 07]
[ 0.538360] pci 0000:00:1d.0: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.538367] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.538370] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.538372] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.538374] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.538375] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.538377] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.538379] pci_bus 0000:01: resource 1 [mem 0xdf900000-0xdfbfffff]
[ 0.538381] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538383] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.538384] pci_bus 0000:02: resource 1 [mem 0xdf900000-0xdfafffff]
[ 0.538386] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538388] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.538390] pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdfafffff]
[ 0.538391] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.538394] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.538395] pci_bus 0000:05: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.538397] pci_bus 0000:06: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.538399] pci_bus 0000:07: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.549991] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x750 took 11144 usecs
[ 0.550058] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[ 0.550326] PCI: CLS 0 bytes, default 64
[ 0.550370] pci 0000:00:1f.1: [8086:a120] type 00 class 0x058000 conventional PCI endpoint
[ 0.550507] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
[ 0.550644] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.550646] software IO TLB: mapped [mem 0x000000007bae1000-0x000000007fae1000] (64MB)
[ 0.550714] Trying to unpack rootfs image as initramfs...
[ 0.586579] Initialise system trusted keyrings
[ 0.586589] Key type blacklist registered
[ 0.586633] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.586927] fuse: init (API version 7.42)
[ 0.587020] integrity: Platform Keyring initialized
[ 0.587024] integrity: Machine keyring initialized
[ 0.602783] xor: automatically using best checksumming function avx
[ 0.602786] Key type asymmetric registered
[ 0.602787] Asymmetric key parser 'x509' registered
[ 0.602808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.602860] io scheduler mq-deadline registered
[ 0.602862] io scheduler kyber registered
[ 0.602873] io scheduler bfq registered
[ 0.603834] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.605050] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.606298] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.606326] ACPI: button: Sleep Button [SLPB]
[ 0.606356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.606374] ACPI: button: Power Button [PWRB]
[ 0.606406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.609706] ACPI: button: Power Button [PWRF]
[ 0.614039] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.614437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.616781] Non-volatile memory driver v1.3
[ 0.616784] Linux agpgart interface v0.103
[ 0.616900] ACPI: bus type drm_connector registered
[ 0.618425] ahci 0000:00:17.0: version 3.0
[ 0.626758] Freeing initrd memory: 37892K
[ 0.628751] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.628757] ahci 0000:00:17.0: 6/6 ports implemented (port mask 0x3f)
[ 0.628759] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.640381] scsi host0: ahci
[ 0.640780] scsi host1: ahci
[ 0.641149] scsi host2: ahci
[ 0.641314] scsi host3: ahci
[ 0.641510] scsi host4: ahci
[ 0.641658] scsi host5: ahci
[ 0.641695] ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 126 lpm-pol 3
[ 0.641698] ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 126 lpm-pol 3
[ 0.641700] ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 126 lpm-pol 3
[ 0.641702] ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 126 lpm-pol 3
[ 0.641704] ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 126 lpm-pol 3
[ 0.641706] ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 126 lpm-pol 3
[ 0.641892] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled
[ 0.641922] ahci 0000:05:00.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode
[ 0.641925] ahci 0000:05:00.0: 2/2 ports implemented (port mask 0x3)
[ 0.641927] ahci 0000:05:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.642251] scsi host6: ahci
[ 0.642466] scsi host7: ahci
[ 0.642504] ata7: SATA max UDMA/133 abar m512@0xdfe00000 port 0xdfe00100 irq 19 lpm-pol 3
[ 0.642508] ata8: SATA max UDMA/133 abar m512@0xdfe00000 port 0xdfe00180 irq 19 lpm-pol 3
[ 0.642724] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.642731] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.643811] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 0.644240] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.644246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.644249] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.644291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.644294] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.644296] usb usb1: Product: xHCI Host Controller
[ 0.644298] usb usb1: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.644300] usb usb1: SerialNumber: 0000:00:14.0
[ 0.644494] hub 1-0:1.0: USB hub found
[ 0.644512] hub 1-0:1.0: 16 ports detected
[ 0.648065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.648069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648071] usb usb2: Product: xHCI Host Controller
[ 0.648073] usb usb2: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.648075] usb usb2: SerialNumber: 0000:00:14.0
[ 0.648209] hub 2-0:1.0: USB hub found
[ 0.648224] hub 2-0:1.0: 10 ports detected
[ 0.650733] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 0.650739] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
[ 0.709844] xhci_hcd 0000:06:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
[ 0.710086] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 0.710090] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
[ 0.710093] xhci_hcd 0000:06:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.710139] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[ 0.710143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.710145] usb usb3: Product: xHCI Host Controller
[ 0.710146] usb usb3: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.710148] usb usb3: SerialNumber: 0000:06:00.0
[ 0.710271] hub 3-0:1.0: USB hub found
[ 0.710279] hub 3-0:1.0: 2 ports detected
[ 0.710362] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.710382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[ 0.710385] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.710387] usb usb4: Product: xHCI Host Controller
[ 0.710389] usb usb4: Manufacturer: Linux 6.14.3-arch1-1 xhci-hcd
[ 0.710390] usb usb4: SerialNumber: 0000:06:00.0
[ 0.710507] hub 4-0:1.0: USB hub found
[ 0.710515] hub 4-0:1.0: 2 ports detected
[ 0.710618] usbcore: registered new interface driver usbserial_generic
[ 0.710626] usbserial: USB Serial support registered for generic
[ 0.710835] rtc_cmos 00:03: RTC can wake from S4
[ 0.711547] rtc_cmos 00:03: registered as rtc0
[ 0.711680] rtc_cmos 00:03: setting system clock to 2025-04-26T12:01:25 UTC (1745668885)
[ 0.711708] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 0.712449] intel_pstate: Intel P-state driver initializing
[ 0.713486] intel_pstate: Disabling energy efficiency optimization
[ 0.713486] intel_pstate: HWP enabled
[ 0.713730] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[ 0.713732] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.713929] fbcon: Deferring console take-over
[ 0.713931] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.713985] hid: raw HID events driver (C) Jiri Kosina
[ 0.714015] drop_monitor: Initializing network drop monitor service
[ 0.714072] NET: Registered PF_INET6 protocol family
[ 0.718043] Segment Routing with IPv6
[ 0.718045] RPL Segment Routing with IPv6
[ 0.718050] In-situ OAM (IOAM) with IPv6
[ 0.718062] NET: Registered PF_PACKET protocol family
[ 0.719116] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.719537] mce: [Hardware Error]: Machine check events logged
[ 0.719538] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 10: ee0000000040110a
[ 0.719541] fbcon: Taking over console
[ 0.719542] mce: [Hardware Error]: TSC 0 ADDR fef20640 MISC 43880000086
[ 0.719545] mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745668885 SOCKET 0 APIC 0 microcode 0
[ 0.719548] mce: [Hardware Error]: Machine check events logged
[ 0.719548] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 11: ee0000000040110a
[ 0.719550] mce: [Hardware Error]: TSC 0 ADDR fef20600 MISC 43880000086
[ 0.719552] mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745668885 SOCKET 0 APIC 0 microcode 0
[ 0.719554] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 12: ee0000000040110a
[ 0.719556] mce: [Hardware Error]: TSC 0 ADDR fef20440 MISC 43880000086
[ 0.719558] mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745668885 SOCKET 0 APIC 0 microcode 0
[ 0.719559] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 13: ee0000000040110a
[ 0.719561] mce: [Hardware Error]: TSC 0 ADDR fef20400 MISC 43880000086
[ 0.719563] mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745668885 SOCKET 0 APIC 0 microcode 0
[ 0.719719] microcode: Current revision: 0x00000102
[ 0.719721] microcode: Updated early from: 0x000000ea
[ 0.719795] Console: switching to colour frame buffer device 80x30
[ 0.720797] IPI shorthand broadcast: enabled
[ 0.721802] sched_clock: Marking stable (718000963, 3649711)->(765206130, -43555456)
[ 0.722066] registered taskstats version 1
[ 0.723143] Loading compiled-in X.509 certificates
[ 0.726593] Loaded X.509 cert 'Build time autogenerated kernel key: 153b0a8ad8975753c99c6379dae770f697e830d1'
[ 0.729062] zswap: loaded using pool zstd/zsmalloc
[ 0.729158] Demotion targets for Node 0: null
[ 0.729322] Key type .fscrypt registered
[ 0.729323] Key type fscrypt-provisioning registered
[ 0.729688] Btrfs loaded, zoned=yes, fsverity=yes
[ 0.730917] integrity: Loading X.509 certificate: UEFI:db
[ 0.733038] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[ 0.733040] integrity: Loading X.509 certificate: UEFI:db
[ 0.733135] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[ 0.733136] integrity: Loading X.509 certificate: UEFI:db
[ 0.733146] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.733147] integrity: Loading X.509 certificate: UEFI:db
[ 0.733156] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.733156] integrity: Loading X.509 certificate: UEFI:db
[ 0.733251] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[ 0.734460] PM: Magic number: 5:176:27
[ 0.734531] memory memory67: hash matches
[ 0.736629] RAS: Correctable Errors collector initialized.
[ 0.743067] clk: Disabling unused clocks
[ 0.743069] PM: genpd: Disabling unused power domains
[ 0.883760] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 0.945763] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.945818] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.945847] ata2: SATA link down (SStatus 4 SControl 300)
[ 0.945899] ata3: SATA link down (SStatus 4 SControl 300)
[ 0.946010] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.946041] ata1: SATA link down (SStatus 4 SControl 300)
[ 0.946072] ata4.00: ATA-10: KINGSTON SA400S37240G, SBFK61K1, max UDMA/133
[ 0.946092] ata6.00: ATA-11: T-128, 1.74.00, max UDMA/133
[ 0.946163] ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.946200] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.946543] ata4.00: configured for UDMA/133
[ 0.946877] scsi 3:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5
[ 0.947202] ata5.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 0.947451] ata6.00: configured for UDMA/133
[ 0.947588] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 0.947614] sd 3:0:0:0: [sda] Write Protect is off
[ 0.947620] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.947648] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.947723] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.948562] ata5.00: configured for UDMA/133
[ 0.950875] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 0.953752] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.960102] sda: sda1 sda2 sda3
[ 0.960716] sd 3:0:0:0: [sda] Attached SCSI disk
[ 0.968729] scsi 5:0:0:0: Direct-Access ATA T-128 .00 PQ: 0 ANSI: 5
[ 0.969379] sd 5:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.969404] sd 5:0:0:0: [sdb] Write Protect is off
[ 0.969410] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.969437] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.969491] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 0.988981] sdb: sdb1 sdb2 sdb3
[ 0.989598] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.018026] usb 1-5: New USB device found, idVendor=0e41, idProduct=4151, bcdDevice= 0.01
[ 1.018040] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.018046] usb 1-5: Product: UX2
[ 1.018051] usb 1-5: Manufacturer: Line 6
[ 1.119845] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.131378] usb 2-6: LPM exit latency is zeroed, disabling LPM.
[ 1.131993] usb 2-6: New USB device found, idVendor=346d, idProduct=5678, bcdDevice= 2.00
[ 1.132004] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.132010] usb 2-6: Product: Disk 20
[ 1.132015] usb 2-6: Manufacturer: USB
[ 1.132019] usb 2-6: SerialNumber: FC301EB910456
[ 1.242759] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.273735] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.277327] Freeing unused decrypted memory: 2028K
[ 1.279510] Freeing unused kernel image (initmem) memory: 4528K
[ 1.279523] Write protecting the kernel read-only data: 36864k
[ 1.280174] Freeing unused kernel image (text/rodata gap) memory: 1280K
[ 1.280355] Freeing unused kernel image (rodata/data gap) memory: 112K
[ 1.289572] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.289575] rodata_test: all tests were successful
[ 1.289577] Run /init as init process
[ 1.289578] with arguments:
[ 1.289578] /init
[ 1.289579] with environment:
[ 1.289579] HOME=/
[ 1.289580] TERM=linux
[ 1.289580] BOOT_IMAGE=/vmlinuz-linux
[ 1.366673] usb 1-7: New USB device found, idVendor=0b05, idProduct=190e, bcdDevice= 2.00
[ 1.366676] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.366677] usb 1-7: Product: ASUS USB-BT500
[ 1.366678] usb 1-7: Manufacturer: Realtek
[ 1.366678] usb 1-7: SerialNumber: 00E04C239987
[ 1.433395] usb-storage 2-6:1.0: USB Mass Storage device detected
[ 1.433468] scsi host8: usb-storage 2-6:1.0
[ 1.433504] usbcore: registered new interface driver usb-storage
[ 1.435886] usbcore: registered new interface driver uas
[ 1.446000] nvme nvme0: pci function 0000:07:00.0
[ 1.450255] nvme nvme0: missing or invalid SUBNQN field.
[ 1.458603] nvme nvme0: allocated 64 MiB host memory buffer (16 segments).
[ 1.475054] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.475057] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.475497] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.479737] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 1.480374] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 1.483979] nvme0n1: p1 p2 p3
[ 1.506182] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.603742] tsc: Refined TSC clocksource calibration: 2111.999 MHz
[ 1.603748] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e7177b097e, max_idle_ns: 440795281886 ns
[ 1.603804] clocksource: Switched to clocksource tsc
[ 1.607930] usb 1-8: New USB device found, idVendor=28de, idProduct=1142, bcdDevice= 0.01
[ 1.607933] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.607934] usb 1-8: Product: Steam Controller
[ 1.607935] usb 1-8: Manufacturer: Valve Software
[ 1.722699] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[ 1.849047] usb 1-9: New USB device found, idVendor=0c45, idProduct=7697, bcdDevice= 1.04
[ 1.849049] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.849050] usb 1-9: Product: Wired Gaming Keyboard
[ 1.849051] usb 1-9: Manufacturer: SONiX
[ 1.964705] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[ 2.090095] usb 1-10: New USB device found, idVendor=09da, idProduct=36e0, bcdDevice= 0.33
[ 2.090098] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.090100] usb 1-10: Product: USB Device
[ 2.090101] usb 1-10: Manufacturer: COMPANY
[ 2.203655] usb 1-12: new full-speed USB device number 7 using xhci_hcd
[ 2.328971] usb 1-12: New USB device found, idVendor=291a, idProduct=385c, bcdDevice= 1.00
[ 2.328973] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.328974] usb 1-12: Product: VR P10 Dongle
[ 2.328975] usb 1-12: Manufacturer: Telink
[ 2.436093] scsi 8:0:0:0: Direct-Access VendorC ProductCode 3.00 PQ: 0 ANSI: 4
[ 2.437086] sd 8:0:0:0: [sdc] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[ 2.437204] sd 8:0:0:0: [sdc] Write Protect is off
[ 2.437206] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 2.437324] sd 8:0:0:0: [sdc] No Caching mode page found
[ 2.437325] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 2.651513] sdc: sdc1 sdc2
[ 2.651569] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 4.006825] [drm] amdgpu kernel modesetting enabled.
[ 4.006888] amdgpu: Virtual CRAT table created for CPU
[ 4.006895] amdgpu: Topology: Add CPU node
[ 4.006994] [drm] initializing kernel modesetting (NAVY_FLOUNDER 0x1002:0x73DF 0x1043:0x05C9 0xC1).
[ 4.007001] [drm] register mmio base: 0xDF900000
[ 4.007002] [drm] register mmio size: 1048576
[ 4.009228] usbcore: registered new interface driver usbhid
[ 4.009229] usbhid: USB HID core driver
[ 4.009943] amdgpu 0000:03:00.0: amdgpu: detected ip block number 0 <nv_common>
[ 4.009946] amdgpu 0000:03:00.0: amdgpu: detected ip block number 1 <gmc_v10_0>
[ 4.009947] amdgpu 0000:03:00.0: amdgpu: detected ip block number 2 <navi10_ih>
[ 4.009948] amdgpu 0000:03:00.0: amdgpu: detected ip block number 3 <psp>
[ 4.009949] amdgpu 0000:03:00.0: amdgpu: detected ip block number 4 <smu>
[ 4.009950] amdgpu 0000:03:00.0: amdgpu: detected ip block number 5 <gfx_v10_0>
[ 4.009951] amdgpu 0000:03:00.0: amdgpu: detected ip block number 6 <sdma_v5_2>
[ 4.009952] amdgpu 0000:03:00.0: amdgpu: detected ip block number 7 <vcn_v3_0>
[ 4.009953] amdgpu 0000:03:00.0: amdgpu: detected ip block number 8 <jpeg_v3_0>
[ 4.012049] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from platform
[ 4.012050] amdgpu: ATOM BIOS: 115-D512BS0-100
[ 4.012602] input: Valve Software Steam Controller Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:28DE:1142.0001/input/input3
[ 4.040905] Console: switching to colour dummy device 80x25
[ 4.051000] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 4.051002] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[ 4.051031] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 4.051036] amdgpu 0000:03:00.0: amdgpu: VRAM: 12272M 0x0000008000000000 - 0x00000082FEFFFFFF (12272M used)
[ 4.051038] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[ 4.051044] [drm] Detected VRAM RAM=12272M, BAR=256M
[ 4.051045] [drm] RAM width 192bits GDDR6
[ 4.051195] [drm] amdgpu: 12272M of VRAM memory ready
[ 4.051197] [drm] amdgpu: 16018M of GTT memory ready.
[ 4.051205] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.051285] [drm] PCIE GART of 512M enabled (table at 0x0000008000200000).
[ 4.099832] input: Valve Software Steam Controller Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:28DE:1142.0001/input/input4
[ 4.100018] hid-generic 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-8/input0
[ 4.100258] hid-generic 0003:28DE:1142.0002: hiddev96,hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input1
[ 4.100332] hid-generic 0003:28DE:1142.0003: hiddev97,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input2
[ 4.100407] hid-generic 0003:28DE:1142.0004: hiddev98,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input3
[ 4.100466] hid-generic 0003:28DE:1142.0005: hiddev99,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input4
[ 4.100555] input: SONiX Wired Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0C45:7697.0006/input/input5
[ 4.186893] hid-generic 0003:0C45:7697.0006: input,hidraw5: USB HID v1.11 Keyboard [SONiX Wired Gaming Keyboard] on usb-0000:00:14.0-9/input0
[ 4.187293] input: SONiX Wired Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0C45:7697.0007/input/input6
[ 4.237784] input: SONiX Wired Gaming Keyboard Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0C45:7697.0007/input/input7
[ 4.237880] input: SONiX Wired Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:0C45:7697.0007/input/input8
[ 4.238162] hid-generic 0003:0C45:7697.0007: input,hiddev100,hidraw6: USB HID v1.11 Keyboard [SONiX Wired Gaming Keyboard] on usb-0000:00:14.0-9/input1
[ 4.238250] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:09DA:36E0.0008/input/input9
[ 4.327887] hid-generic 0003:09DA:36E0.0008: input,hidraw7: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:14.0-10/input0
[ 4.327951] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:09DA:36E0.0009/input/input10
[ 4.328130] hid-generic 0003:09DA:36E0.0009: input,hidraw8: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:14.0-10/input1
[ 4.328264] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:09DA:36E0.000A/input/input11
[ 4.378794] input: COMPANY USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:09DA:36E0.000A/input/input12
[ 4.379051] hid-generic 0003:09DA:36E0.000A: input,hiddev101,hidraw9: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:14.0-10/input2
[ 4.379112] input: Telink VR P10 Dongle Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.3/0003:291A:385C.000B/input/input13
[ 4.429877] hid-generic 0003:291A:385C.000B: input,hidraw10: USB HID v1.11 Device [Telink VR P10 Dongle] on usb-0000:00:14.0-12/input3
[ 4.492933] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:28DE:1142.0001/input/input14
[ 4.567894] hid-steam 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-8/input0
[ 4.568216] hid-steam 0003:28DE:1142.0002: hiddev96: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input1
[ 4.618687] hid-steam 0003:28DE:1142.0002: Steam wireless receiver connected
[ 4.619229] hid-steam 0003:28DE:1142.000C: hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input1
[ 4.619518] hid-steam 0003:28DE:1142.0003: hiddev97: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input2
[ 4.669685] hid-steam 0003:28DE:1142.0003: Steam wireless receiver connected
[ 4.670235] hid-steam 0003:28DE:1142.000D: hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input2
[ 4.670509] hid-steam 0003:28DE:1142.0004: hiddev98: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input3
[ 4.720685] hid-steam 0003:28DE:1142.0004: Steam wireless receiver connected
[ 4.721235] hid-steam 0003:28DE:1142.000E: hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input3
[ 4.721478] hid-steam 0003:28DE:1142.0005: hiddev99: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input4
[ 4.771685] hid-steam 0003:28DE:1142.0005: Steam wireless receiver connected
[ 4.772224] hid-steam 0003:28DE:1142.000F: hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-8/input4
[ 5.410942] amdgpu 0000:03:00.0: amdgpu: STB initialized to 2048 entries
[ 5.411270] [drm] use_doorbell being set to: [true]
[ 5.411280] [drm] use_doorbell being set to: [true]
[ 5.411292] [drm] Found VCN firmware Version ENC: 1.33 DEC: 4 VEP: 0 Revision: 6
[ 5.474287] amdgpu 0000:03:00.0: amdgpu: reserve 0xa00000 from 0x82fd000000 for PSP TMR
[ 5.575338] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 5.590577] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 5.590603] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000000e, smu fw if version = 0x00000012, smu fw program = 0, version = 0x00413e00 (65.62.0)
[ 5.590614] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[ 5.590654] amdgpu 0000:03:00.0: amdgpu: use vbios provided pptable
[ 5.645341] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[ 5.647114] [drm] kiq ring mec 2 pipe 1 q 0
[ 5.692223] amdgpu: HMM registered 12272MB device memory
[ 5.693572] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 5.693581] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 5.693850] amdgpu: Virtual CRAT table created for GPU
[ 5.694178] amdgpu: Topology: Add dGPU node [0x73df:0x1002]
[ 5.694179] kfd kfd: amdgpu: added device 1002:73df
[ 5.694198] amdgpu 0000:03:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40
[ 5.694201] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 5.694202] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.1.0 uses VM inv eng 1 on hub 0
[ 5.694203] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 4 on hub 0
[ 5.694204] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 5 on hub 0
[ 5.694204] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 5.694205] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 5.694206] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 5.694207] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 5.694207] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 5.694208] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 5.694209] amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 12 on hub 0
[ 5.694209] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 13 on hub 0
[ 5.694210] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 14 on hub 0
[ 5.694211] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
[ 5.694212] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
[ 5.694213] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
[ 5.694213] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[ 5.695431] amdgpu 0000:03:00.0: amdgpu: Using BOCO for runtime pm
[ 5.695537] [drm] Initialized amdgpu 3.61.0 for 0000:03:00.0 on minor 1
[ 5.748158] EXT4-fs (nvme0n1p3): mounted filesystem b471e54d-afa4-46fa-8a18-ecbda1c74493 r/w with ordered data mode. Quota mode: none.
[ 5.866412] systemd[1]: systemd 257.5-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 5.866430] systemd[1]: Detected architecture x86-64.
[ 5.869066] systemd[1]: Hostname set to <archftw>.
[ 5.984556] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 6.306532] systemd[1]: Queued start job for default target Graphical Interface.
[ 6.331925] systemd[1]: Created slice Slice /system/dirmngr.
[ 6.332278] systemd[1]: Created slice Slice /system/getty.
[ 6.332583] systemd[1]: Created slice Slice /system/gpg-agent.
[ 6.332901] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 6.333207] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 6.333551] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 6.333860] systemd[1]: Created slice Slice /system/keyboxd.
[ 6.334169] systemd[1]: Created slice Slice /system/modprobe.
[ 6.334376] systemd[1]: Created slice User and Session Slice.
[ 6.334429] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.334466] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.334603] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.334622] systemd[1]: Expecting device /dev/disk/by-uuid/1F52-28B3...
[ 6.334630] systemd[1]: Expecting device /dev/disk/by-uuid/cbc89b37-3848-4e40-950d-40ad87711ad9...
[ 6.334639] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.334663] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 6.334687] systemd[1]: Reached target Path Units.
[ 6.334700] systemd[1]: Reached target Remote File Systems.
[ 6.334709] systemd[1]: Reached target Slice Units.
[ 6.334735] systemd[1]: Reached target Local Verity Protected Volumes.
[ 6.334804] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.336207] systemd[1]: Listening on Process Core Dump Socket.
[ 6.337187] systemd[1]: Listening on Credential Encryption/Decryption.
[ 6.337284] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.337362] systemd[1]: Listening on Journal Sockets.
[ 6.337479] systemd[1]: Listening on Network Service Netlink Socket.
[ 6.337508] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.337519] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.337583] systemd[1]: Listening on udev Control Socket.
[ 6.337633] systemd[1]: Listening on udev Kernel Socket.
[ 6.337705] systemd[1]: Listening on User Database Manager Socket.
[ 6.338802] systemd[1]: Mounting Huge Pages File System...
[ 6.339469] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.340187] systemd[1]: Mounting Kernel Debug File System...
[ 6.340884] systemd[1]: Mounting Kernel Trace File System...
[ 6.341660] systemd[1]: Starting Create List of Static Device Nodes...
[ 6.342412] systemd[1]: Starting Load Kernel Module configfs...
[ 6.343199] systemd[1]: Starting Load Kernel Module dm_mod...
[ 6.343963] systemd[1]: Starting Load Kernel Module drm...
[ 6.345048] systemd[1]: Starting Load Kernel Module fuse...
[ 6.346079] systemd[1]: Starting Load Kernel Module loop...
[ 6.346149] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 6.346194] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 6.347869] systemd[1]: Starting Journal Service...
[ 6.349426] systemd[1]: Starting Load Kernel Modules...
[ 6.349827] systemd[1]: Starting Generate network units from Kernel command line...
[ 6.349844] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.350240] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.350268] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.350675] systemd[1]: Starting Load udev Rules from Credentials...
[ 6.351055] systemd[1]: Starting Coldplug All udev Devices...
[ 6.352452] loop: module loaded
[ 6.352850] systemd[1]: Mounted Huge Pages File System.
[ 6.352922] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.353230] systemd[1]: Mounted Kernel Debug File System.
[ 6.353325] systemd[1]: Mounted Kernel Trace File System.
[ 6.353502] systemd[1]: Finished Create List of Static Device Nodes.
[ 6.353708] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.353827] systemd[1]: Finished Load Kernel Module configfs.
[ 6.353998] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 6.354090] systemd[1]: Finished Load Kernel Module drm.
[ 6.354229] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.354304] systemd[1]: Finished Load Kernel Module fuse.
[ 6.354423] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 6.354499] systemd[1]: Finished Load Kernel Module loop.
[ 6.354689] systemd[1]: Finished Generate network units from Kernel command line.
[ 6.354955] systemd[1]: Reached target Preparation for Network.
[ 6.355386] systemd[1]: Mounting FUSE Control File System...
[ 6.355506] device-mapper: uevent: version 1.0.3
[ 6.355550] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[ 6.355770] systemd[1]: Mounting Kernel Configuration File System...
[ 6.356160] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 6.356309] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 6.356390] systemd[1]: Finished Load Kernel Module dm_mod.
[ 6.356474] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 6.357508] systemd[1]: Finished Load Kernel Modules.
[ 6.357974] systemd[1]: Starting Apply Kernel Variables...
[ 6.358437] systemd[1]: Finished Load udev Rules from Credentials.
[ 6.358694] systemd[1]: Mounted FUSE Control File System.
[ 6.358762] systemd[1]: Mounted Kernel Configuration File System.
[ 6.359126] systemd-journald[407]: Collecting audit messages is disabled.
[ 6.364154] systemd[1]: Finished Apply Kernel Variables.
[ 6.369825] systemd[1]: Starting User Database Manager...
[ 6.375039] EXT4-fs (nvme0n1p3): re-mounted b471e54d-afa4-46fa-8a18-ecbda1c74493 r/w. Quota mode: none.
[ 6.375585] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 6.375838] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[ 6.376301] systemd[1]: Starting Load/Save OS Random Seed...
[ 6.376314] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.383380] systemd[1]: Finished Load/Save OS Random Seed.
[ 6.386474] systemd[1]: Started User Database Manager.
[ 6.391768] systemd[1]: Started Journal Service.
[ 6.401339] systemd-journald[407]: Received client request to flush runtime journal.
[ 6.584374] mousedev: PS/2 mouse device common for all mice
[ 6.597148] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[ 6.597153] caller get_primary_reg_base+0x4d/0xb0 [intel_pmc_core] mapping multiple BARs
[ 6.597171] intel_pmc_core INT33A1:00: initialized
[ 6.626465] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 6.633231] pps_core: LinuxPPS API ver. 1 registered
[ 6.633233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.660060] i8042: PNP: No PS/2 controller found.
[ 6.660063] i8042: Probing ports directly.
[ 6.660141] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 6.660165] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 6.660703] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.660868] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.660955] PTP clock support registered
[ 6.661011] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.661681] i2c i2c-2: Successfully instantiated SPD at 0x51
[ 6.662232] i2c i2c-2: Successfully instantiated SPD at 0x53
[ 6.663204] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.663237] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.663471] mc: Linux media interface: v0.10
[ 6.682426] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.682431] cfg80211: failed to load regulatory.db
[ 6.689136] Bluetooth: Core ver 2.22
[ 6.689149] NET: Registered PF_BLUETOOTH protocol family
[ 6.689150] Bluetooth: HCI device and connection manager initialized
[ 6.689152] Bluetooth: HCI socket layer initialized
[ 6.689153] Bluetooth: L2CAP socket layer initialized
[ 6.689157] Bluetooth: SCO socket layer initialized
[ 6.699422] Adding 16777212k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:16777212k SS
[ 6.699743] iTCO_vendor_support: vendor-support=0
[ 6.699753] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 6.699755] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.699757] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.699758] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.706353] ee1004 2-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 6.706597] cryptd: max_cpu_qlen set to 1000
[ 6.707489] asus_wmi: ASUS WMI generic driver loaded
[ 6.707719] ee1004 2-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 6.710120] e1000e: Intel(R) PRO/1000 Network Driver
[ 6.710122] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.710288] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.713199] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 6.713306] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.713904] asus_wmi: Initialization: 0x0
[ 6.713930] asus_wmi: BIOS WMI version: 0.9
[ 6.713975] asus_wmi: SFUN value: 0x0
[ 6.713977] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[ 6.715697] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17
[ 6.726196] AES CTR mode by8 optimization enabled
[ 6.731065] snd_usb_toneport 1-5:1.0: Line 6 POD Studio UX2 found
[ 6.738138] usbcore: registered new interface driver btusb
[ 6.740595] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[ 6.741590] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 6.741592] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[ 6.757471] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[ 6.761692] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 6.762572] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[ 6.768146] usb 1-12: Warning! Unlikely big volume range (=16000), cval->res is probably wrong.
[ 6.768149] usb 1-12: [2] FU [PCM Playback Volume] ch = 1, val = -16000/0/1
[ 6.768851] usb 1-12: Warning! Unlikely big volume range (=7680), cval->res is probably wrong.
[ 6.768853] usb 1-12: [5] FU [Mic Capture Volume] ch = 1, val = 0/7680/1
[ 6.769026] usbcore: registered new interface driver snd-usb-audio
[ 6.773507] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input19
[ 6.773541] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input20
[ 6.773565] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input21
[ 6.773598] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input22
[ 6.773626] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input23
[ 6.773658] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card3/input24
[ 6.776165] usb 1-5: send failed (error -71)
[ 6.776616] snd_usb_toneport 1-5:1.0: Line 6 POD Studio UX2 now attached
[ 6.776634] usbcore: registered new interface driver snd_usb_toneport
[ 6.790640] snd_hda_codec_realtek hdaudioC2D0: ALC1150: picked fixup for PCI SSID 1043:8691
[ 6.790644] snd_hda_codec_realtek hdaudioC2D0: ALC1150: SKU not ready 0x00000000
[ 6.791101] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 6.791103] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.791104] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.791105] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 6.791105] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
[ 6.791106] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 6.791107] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 6.791108] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 6.791109] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 6.820953] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card2/input26
[ 6.820991] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card2/input27
[ 6.821029] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card2/input28
[ 6.821062] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card2/input29
[ 6.821093] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card2/input30
[ 6.821124] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card2/input31
[ 6.821154] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card2/input32
[ 6.857560] intel_tcc_cooling: Programmable TCC Offset detected
[ 6.910598] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[ 6.924261] intel_rapl_common: Found RAPL domain package
[ 6.924263] intel_rapl_common: Found RAPL domain core
[ 6.924264] intel_rapl_common: Found RAPL domain dram
[ 6.937654] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 7.001250] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
[ 7.001263] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 7.001350] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 7.007511] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 7.756619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.756622] Bluetooth: BNEP filters: protocol multicast
[ 7.756625] Bluetooth: BNEP socket layer initialized
[ 7.757488] Bluetooth: MGMT ver 1.23
[ 7.761706] NET: Registered PF_ALG protocol family
[ 10.614214] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/TxAlso, I'm not native in English, so there might be some weird phrasing or grammactical errors here and there
Last edited by KayZoka (2025-05-04 16:23:29)
Offline
#2 2025-04-26 16:23:56
- Nikolai5
- Member
- From: North West, England, UK
- Registered: 2024-01-27
- Posts: 228
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Boot into arch live ISO like when you installed Arch, mount your system, arch-chroot in, uninstall package, rebuild kernel image with mkinitcpio.
If that gets you back in, what GPU issues are you having?
Have you read: https://wiki.archlinux.org/title/AMDGPU
Desktop: Ryzen 7 1800X | AMD 7800XT | KDE Plasma
MacbookPro-2012 | XFCE
Offline
#3 2025-04-26 16:49:08
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Nikolai5 wrote:
Boot into arch live ISO like when you installed Arch, mount your system, arch-chroot in, uninstall package, rebuild kernel image with mkinitcpio.
If that gets you back in, what GPU issues are you having?
Have you read: https://wiki.archlinux.org/title/AMDGPU
Yes, I did
I did uninstall the package using ssh from my phone, pacman should have rebuilt the kernel image, but with no success
Offline
#4 2025-04-26 16:53:01
- Nikolai5
- Member
- From: North West, England, UK
- Registered: 2024-01-27
- Posts: 228
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
What do you mean "no success"?
Try running "sudo mkinitcpio -P"
Desktop: Ryzen 7 1800X | AMD 7800XT | KDE Plasma
MacbookPro-2012 | XFCE
Offline
#5 2025-04-26 17:17:34
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
I meant that monitor still has no signal, mkinitcpio doesn't error
Offline
#6 2025-04-26 17:23:26
- Nikolai5
- Member
- From: North West, England, UK
- Registered: 2024-01-27
- Posts: 228
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Try removing all of these kernel parameters: radeon.cik_support=0 amdgpu.cik_support=0 radeon.si_support=0 amdgpu.si_support=1
They are intended for cards older than yours.
Desktop: Ryzen 7 1800X | AMD 7800XT | KDE Plasma
MacbookPro-2012 | XFCE
Offline
#7 2025-04-26 19:17:26
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
I removed amdgpu.conf and radeon.conf inside /etc/modprobe.d/ and in GRUB pressed "e" to edit the entry and removed the parameters, then pressed F10 to boot. No signal 
Offline
#8 2025-04-27 05:52:07
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Putting some foreign cpu patches on your disk will do absolutely no harm whatsoever.
Instructing amdgpu and radeon to shift control of some non-existing GPU families will do absolutely no harm whatsoever.
Can you boot the multi-user.target (2nd link below)
The simplydumb device has recently been acting up again (*SIGH*) so add another parameter for non-existing hardware: "nvidia_drm.modeset=1" (it'll implicitly block the simpledrm device, but it *has* to be the kernel parameter) and get us a journal of the failing boot,
sudo journalctl -b | curl -F 'file=@-' 0x0.stOffline
#9 2025-04-27 07:10:06
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Okay, I "sudo systemctl set-default multi-user.target" 'd from ssh, rebooted, added the parameter the same way as I did before, ran the command, and it produced this link:
Offline
#10 2025-04-27 11:50:15
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Booting the multi-user.target still leaves you w/ a black screen?
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: Machine check events logged
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 10: ee0000000040110a
Apr 27 10:03:58 archftw kernel: fbcon: Taking over console
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: TSC 0 ADDR fef20640 MISC 43880000086
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745737431 SOCKET 0 APIC 0 microcode 0
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: Machine check events logged
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 11: ee0000000040110a
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: TSC 0 ADDR fef20600 MISC 43880000086
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745737431 SOCKET 0 APIC 0 microcode 0
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 12: ee0000000040110a
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: TSC 0 ADDR fef20440 MISC 43880000086
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745737431 SOCKET 0 APIC 0 microcode 0
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 13: ee0000000040110a
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: TSC 0 ADDR fef20400 MISC 43880000086
Apr 27 10:03:58 archftw kernel: mce: [Hardware Error]: PROCESSOR 0:906ed TIME 1745737431 SOCKET 0 APIC 0 microcode 0This looks concerning.
There's quite a bunch of disks and partitions, is there a parallel windows installation?
You'll not be able to run a GUI session, but do you keep an output when booting "nomodeset"?
Offline
#11 2025-04-27 15:33:36
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Yes, I have three disks, first one is arch, second is fedora (my old os, left in case something happens to arch) and windows (left in case something happens to fedora lol)
Running with "nomodeset" does load the display manager (ly), but in low resolution and hyprland doesn't load, only in shell/tty
Edit: glossed over that you said it won't load gui, I think the lines you highlighted are the ones I see every time on boot before a display manager loads, even before I changed my gpu and before everything broke, looks related to this
Last edited by KayZoka (2025-04-27 18:19:00)
Offline
#12 2025-04-27 18:28:18
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
Booting the multi-user.target still leaves you w/ a black screen?
windows (left in case something happens to fedora lol)
3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.
Can you enforce a mode (w/o nomodeset) - https://www.kernel.org/doc/Documentation/fb/modedb.rst ?
If you're not sure about the relevant outputs, you can check
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://github.com/timvideos/edid-decode/ (not yet in v4l-utils and the AUR package is unfortunately gone)
Offline
#13 2025-04-27 18:35:52
- topcat01
- Member
- Registered: 2019-09-17
- Posts: 161
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
You'll need https://github.com/timvideos/edid-decode/ (not yet in v4l-utils and the AUR package is unfortunately gone)
It was merged into https://aur.archlinux.org/packages/v4l-utils-git.
Offline
#14 2025-04-27 18:43:15
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
\o/
So I got to update my textblock 
Offline
#15 2025-04-28 17:22:25
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
seth wrote:Booting the multi-user.target still leaves you w/ a black screen?
windows (left in case something happens to fedora lol)
3rd link below. Mandatory.
Disable it (it's NOT the BIOS setting!) and reboot windows and linux twice for voodo reasons.Can you enforce a mode (w/o nomodeset) - https://www.kernel.org/doc/Documentation/fb/modedb.rst ?
If you're not sure about the relevant outputs, you can checkfor OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://github.com/timvideos/edid-decode/ (not yet in v4l-utils and the AUR package is unfortunately gone)
"powercfg /H off" 'd windows, rebooted it a couple of times, after, rebooted arch a couple of times, installed v4l-utils-git, but didn't really understood how to make a video= parameter, i have a display port 2560x1440p 165hz monitor so i tried "video=DP-1 : 2560x1440@165" and have no input
Journal output (the same command as before):
http://0x0.st/8W9z.txt
[kayzoka@archftw ~]$ for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done
/sys/class/drm/card0
/sys/class/drm/card0/edid: No such file or directory =================Last edited by KayZoka (2025-04-28 17:24:46)
Offline
#16 2025-04-28 19:31:41
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
video=DP-1 : 2560x1440@165Lose the blanks, make it enabled
video=DP-1:2560x1440@165eIs the edid-decode output from a nomodeset boot?
Or is the post missing huge parts of the output?
Do you btw. have another monitor (basic office stuff 1920x1200@60Hz)?
Can you disable https://wiki.archlinux.org/title/Variable_refresh_rate in the monitors OSD?
If you boot blindly (no! "nomodeset") into an X11 session (some DM like lightdm will suffice, autologin/startx or so will help w/ the XAUTHORITY), can you inspect the randr data via ssh?
(Even if you autologin into a session of your user, you'll still have to "export DISPLAY=:0" then "xrandr -q" [Edit: if this works make it "xrandr --verbose" as that will print the EDID 
])
Sidebar: while it's not supposed to do anything, you should still remove the "radeon.cik_support=0 amdgpu.cik_support=0 radeon.si_support=0 amdgpu.si_support=1" nonsense.
Last edited by seth (2025-04-28 19:32:41)
Offline
#17 2025-04-29 18:14:35
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
video=DP-1 : 2560x1440@165Lose the blanks, make it enabled
video=DP-1:2560x1440@165e
Still no output
Is the edid-decode output from a nomodeset boot?
Or is the post missing huge parts of the output?
This is all i get from a w/o nomodeset output on ssh(idk if ssh has something to do with it, putting this just in case)
Do you btw. have another monitor (basic office stuff 1920x1200@60Hz)?
1920x1080@60hz tv, but it's quite far away, i found a cable that is just barely less than 10cm too short, i do have a long enough cable, but i just can't find it
Can you disable https://wiki.archlinux.org/title/Variable_refresh_rate in the monitors OSD?
I found a setting named "adaptive synchronisation" in "screen" tab, but turning it off and making "video=DP-1:2560x1440@60e" still has no signal
If you boot blindly (no! "nomodeset") into an X11 session (some DM like lightdm will suffice, autologin/startx or so will help w/ the XAUTHORITY), can you inspect the randr data via ssh?
(Even if you autologin into a session of your user, you'll still have to "export DISPLAY=:0" then "xrandr -q" [Edit: if this works make it "xrandr --verbose" as that will print the EDID
[kayzoka@archftw ~]$ sudo pacman -S lightdm
[kayzoka@archftw ~]$ sudo systemctl disable ly.service
Removed '/etc/systemd/system/display-manager.service'.
[kayzoka@archftw ~]$ sudo systemctl enable lightdm.service
Created symlink '/etc/systemd/system/display-manager.service' → '/usr/lib/systemd/system/lightdm.service'.
[kayzoka@archftw ~]$ sudo nano /etc/lightdm/ # to set kayzoka as autologin
[kayzoka@archftw ~]$ sudo groupadd -r autologin
[kayzoka@archftw ~]$ sudo gpasswd -a kayzoka autologin
Adding user kayzoka to group autologin
[kayzoka@archftw ~]$ sudo reboot # somewhy have to sudo the reboot on ssh
[kayzoka@archftw ~]$ export DISPLAY=:0
[kayzoka@archftw ~]$ xrandr -q
Can't open display :0Apr 29 20:54:34 archftw kernel: amdgpu 0000:03:00.0: vgaarb: deactivate vga consoleI really don't like this line, ever since i first saw it, since gpus are "VGA complatible driver"s. Is it okay?
P.s. ly has a default built in feature that pressing f1 shuts down the pc and f2 reboots it, even though there is no output to the monitor, pressing the keys would do the thing, now it doesn't (it didn't work even before i disabled ly)
Edit: found the cable, no signal. http://0x0.st/8Wlm.txt
Last edited by KayZoka (2025-04-29 18:34:08)
Offline
#18 2025-04-29 19:44:54
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
idk if ssh has something to do with it, putting this just in case
No, but it suggests that there's only one card and no output at all on that card (not even w/o a monitor connected to it, it's like there's no displayport or hdmi or vga jacks)
I really don't like this line
No, that's fine.
# somewhy have to sudo the reboot on ssh
fwwi, "enable --now" or "start" lightdm would have done.
Can't open display :0
Just to be sure: https://wiki.archlinux.org/title/LightD … _autologin
Does the X11 server fail?
systemctl status lightdm
The lightdm and X11 logs are in /var/log …
Offline
#19 2025-04-30 19:32:04
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
Just to be sure: https://wiki.archlinux.org/title/LightD … _autologin
Installed awesome for a x11 session, added it to autologin-session, no signal
Does the X11 server fail?
systemctl status lightdm
The lightdm and X11 logs are in /var/log …
[kayzoka@archftw ~]$ systemctl status lightdm
○ lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.>
Active: inactive (dead)
Docs: man:lightdm(1)/var/logs has an empty lightdm directory, and nothing that looks like x11..
[kayzoka@archftw ~]$ ls /var/log/
audit cups lightdm private wtmp
btmp journal old README
clamav lastlog pacman.log sambaOffline
#20 2025-04-30 19:54:18
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Apr 30 22:27:49 archftw systemd[1]: Queued start job for default target Multi-User System.Lightdm never starts (and therefore neither does X11) because you still have the multi-user.target as default
Offline
#21 2025-04-30 21:29:34
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Oh...
[kayzoka@archftw ~]$ systemctl status lightdm --no-pager -l
× lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; preset: disabled)
Active: failed (Result: exit-code) since Thu 2025-05-01 00:23:34 MSK; 1min 38s ago
Invocation: b5f23280028f423baf24a7d4e3e77452
Docs: man:lightdm(1)
Process: 707 ExecStart=/usr/bin/lightdm (code=exited, status=1/FAILURE)
Main PID: 707 (code=exited, status=1/FAILURE)
May 01 00:23:34 archftw systemd[1]: lightdm.service: Scheduled restart job, restart counter is at 5.
May 01 00:23:34 archftw systemd[1]: lightdm.service: Start request repeated too quickly.
May 01 00:23:34 archftw systemd[1]: lightdm.service: Failed with result 'exit-code'.
May 01 00:23:34 archftw systemd[1]: Failed to start Light Display Manager.Offline
#22 2025-05-01 07:55:28
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
And… the logs?
Offline
#23 2025-05-01 09:27:55
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
Sorry, (as you can see) it was quite late and my brain wasn't working properly. Apparently, /var/logs/lightdm/ wasn't empty, i read it, i configured lightdm incorrectly. Then i fixed it, started lightdm, and now there's a xorg log:
[ 9.498]
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
[ 9.498] Current Operating System: Linux archftw 6.14.3-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 20 Apr 2025 12:38:52 +0000 x86_64
[ 9.498] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b471e54d-afa4-46fa-8a18-ecbda1c74493 rw loglevel=3 quiet nvidia_drm.modeset=1
[ 9.498]
[ 9.498] Current version of pixman: 0.44.2
[ 9.498] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.498] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.498] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 12:22:25 2025
[ 9.498] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.499] (==) No Layout section. Using the first Screen section.
[ 9.499] (==) No screen section available. Using defaults.
[ 9.499] (**) |-->Screen "Default Screen Section" (0)
[ 9.499] (**) | |-->Monitor "<default monitor>"
[ 9.499] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.499] (**) Allowing byte-swapped clients
[ 9.499] (==) Automatically adding devices
[ 9.499] (==) Automatically enabling devices
[ 9.499] (==) Automatically adding GPU devices
[ 9.499] (==) Automatically binding GPU devices
[ 9.499] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.499] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 9.499] Entry deleted from font path.
[ 9.499] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 9.499] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 9.499] Entry deleted from font path.
[ 9.499] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 9.499] Entry deleted from font path.
[ 9.499] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 9.499] Entry deleted from font path.
[ 9.499] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 9.499] Entry deleted from font path.
[ 9.499] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 9.499] Entry deleted from font path.
[ 9.499] (==) FontPath set to:
[ 9.499] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.499] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.499] (II) Module ABI versions:
[ 9.499] X.Org ANSI C Emulation: 0.4
[ 9.499] X.Org Video Driver: 25.2
[ 9.499] X.Org XInput driver : 24.4
[ 9.499] X.Org Server Extension : 10.0
[ 9.499] (++) using VT number 7
[ 9.499] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.499] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card0
[ 9.501] (--) PCI:*(3@0:0:0) 1002:73df:1043:05c9 rev 193, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf900000/1048576, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 9.501] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.501] (II) LoadModule: "glx"
[ 9.501] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.502] (II) Module glx: vendor="X.Org Foundation"
[ 9.502] compiled for 1.21.1.16, module version = 1.0.0
[ 9.502] ABI class: X.Org Server Extension, version 10.0
[ 9.502] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 9.502] loading driver: amdgpu
[ 9.502] (==) Matched amdgpu as autoconfigured driver 0
[ 9.502] (==) Matched ati as autoconfigured driver 1
[ 9.502] (==) Matched modesetting as autoconfigured driver 2
[ 9.502] (==) Matched fbdev as autoconfigured driver 3
[ 9.502] (==) Matched vesa as autoconfigured driver 4
[ 9.502] (==) Assigned the driver to the xf86ConfigLayout
[ 9.502] (II) LoadModule: "amdgpu"
[ 9.502] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 9.502] (II) Module amdgpu: vendor="X.Org Foundation"
[ 9.502] compiled for 1.21.1.11, module version = 23.0.0
[ 9.502] Module class: X.Org Video Driver
[ 9.502] ABI class: X.Org Video Driver, version 25.2
[ 9.502] (II) LoadModule: "ati"
[ 9.502] (WW) Warning, couldn't open module ati
[ 9.502] (EE) Failed to load module "ati" (module does not exist, 0)
[ 9.502] (II) LoadModule: "modesetting"
[ 9.502] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.502] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.502] compiled for 1.21.1.16, module version = 1.21.1
[ 9.502] Module class: X.Org Video Driver
[ 9.502] ABI class: X.Org Video Driver, version 25.2
[ 9.502] (II) LoadModule: "fbdev"
[ 9.502] (WW) Warning, couldn't open module fbdev
[ 9.502] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.502] (II) LoadModule: "vesa"
[ 9.502] (WW) Warning, couldn't open module vesa
[ 9.502] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.502] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 9.502] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.503] (WW) Falling back to old probe method for modesetting
[ 9.503] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.503] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 9.503] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.503] (==) AMDGPU(0): Default visual is TrueColor
[ 9.503] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0
[ 9.503] (==) AMDGPU(0): RGB weight 888
[ 9.503] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 9.503] (--) AMDGPU(0): Chipset: "AMD Radeon RX 6700 XT" (ChipID = 0x73df)
[ 9.503] (II) Loading sub module "fb"
[ 9.503] (II) LoadModule: "fb"
[ 9.503] (II) Module "fb" already built-in
[ 9.503] (II) Loading sub module "dri2"
[ 9.503] (II) LoadModule: "dri2"
[ 9.503] (II) Module "dri2" already built-in
[ 9.528] (II) Loading sub module "glamoregl"
[ 9.528] (II) LoadModule: "glamoregl"
[ 9.528] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.531] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.531] compiled for 1.21.1.16, module version = 1.0.1
[ 9.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.537] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 6700 XT (radeonsi, navi22, LLVM 19.1.7, DRM 3.61, 6.14.3-arch1-1)
[ 9.537] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 9.537] (==) AMDGPU(0): TearFree property default: auto
[ 9.537] (==) AMDGPU(0): VariableRefresh: disabled
[ 9.537] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 9.537] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 9.537] (WW) AMDGPU(0): No outputs definitely connected, trying again...
[ 9.537] (WW) AMDGPU(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 9.537] (II) AMDGPU(0): mem size init: gart size :3e856e000 vram size: s:2fd7fa000 visible:fe27000
[ 9.537] (==) AMDGPU(0): DPI set to (96, 96)
[ 9.537] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.537] (II) Loading sub module "ramdac"
[ 9.537] (II) LoadModule: "ramdac"
[ 9.537] (II) Module "ramdac" already built-in
[ 9.537] (EE) AMDGPU(0): No modes.
[ 9.538] (II) UnloadModule: "amdgpu"
[ 9.538] (II) UnloadSubModule: "glamoregl"
[ 9.538] (II) Unloading glamoregl
[ 9.538] (EE) Screen(s) found, but none have a usable configuration.
[ 9.538] (EE)
Fatal server error:
[ 9.538] (EE) no screens found(EE)
[ 9.538] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 9.538] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 9.538] (EE)
[ 9.538] (EE) Server terminated with error (1). Closing log file.Lightdm log:
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.32.0, UID=0 PID=752
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /var/lib/flatpak/exports/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.00s] DEBUG: Monitoring logind for seats
[+0.00s] DEBUG: New seat added from logind: seat0
[+0.00s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.00s] DEBUG: Seat seat0 has property CanMultiSession=no
[+0.00s] DEBUG: Seat seat0: Starting
[+0.00s] DEBUG: Seat seat0: Creating user session
[+0.00s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable
[+0.00s] DEBUG: Loading user config from /etc/lightdm/users.conf
[+0.00s] DEBUG: User kayzoka added
[+0.00s] DEBUG: Seat seat0: Creating display server of type x
[+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.00s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+0.00s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+0.00s] DEBUG: XServer 0: Launching X Server
[+0.00s] DEBUG: Launching process 759: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.00s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.00s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.05s] DEBUG: Process 759 exited with return value 1
[+0.05s] DEBUG: XServer 0: X server stopped
[+0.05s] DEBUG: Releasing VT 7
[+0.05s] DEBUG: XServer 0: Removing X server authority /run/lightdm/root/:0
[+0.05s] DEBUG: Seat seat0: Display server stopped
[+0.05s] DEBUG: Seat seat0: Stopping session
[+0.05s] DEBUG: Seat seat0: Session stopped
[+0.05s] DEBUG: Seat seat0: Stopping display server, no sessions require it
[+0.05s] DEBUG: Seat seat0: Active display server stopped, starting greeter
[+0.05s] DEBUG: Seat seat0: Creating greeter session
[+0.05s] DEBUG: Seat seat0: Failed to find session configuration lightdm-gtk-greeter
[+0.05s] DEBUG: Seat seat0: Stopping; failed to start a greeter
[+0.05s] DEBUG: Seat seat0: Stopping
[+0.05s] DEBUG: Seat seat0: Stopped
[+0.05s] DEBUG: Required seat has stopped
[+0.05s] DEBUG: Stopping display manager
[+0.05s] DEBUG: Display manager stopped
[+0.05s] DEBUG: Stopping daemon
[+0.05s] DEBUG: Exiting with return value 1Offline
#24 2025-05-01 13:47:46
- seth
- Member
- Registered: 2012-09-03
- Posts: 63,341
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
[ 9.537] (WW) AMDGPU(0): No outputs definitely connected, trying again...
[ 9.537] (WW) AMDGPU(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 9.537] (EE) AMDGPU(0): No modes.
[ 9.538] (EE) Screen(s) found, but none have a usable configuration.https://wiki.archlinux.org/title/Xorg#Monitor_settings - but that's moot, X11 cannot see an output anywhere either.
For clarification: that problem doesn't exist with either fedora or windows, notably under fedora you've "ls -l /sys/class/drm/card*/edid"?
installing linux-lts (no entry in grub, even though it's in grub-mkconfig??)
IE. you've never actually tried the LTS kernel?
pacman -Qikk linux-lts
ls -lR /etc/mkinitcpio.d/
ls -l /bootAnd what's the exact grub-mkconfig command you ran and what does it print out?
Offline
#25 2025-05-02 08:14:45
- KayZoka
- Member
- Registered: 2025-04-26
- Posts: 17
Re: [SOLVED] Installed amd-ucode on intel cpu, no monitor signal
seth wrote:
For clarification: that problem doesn't exist with either fedora or windows, notably under fedora you've "ls -l /sys/class/drm/card*/edid"?
Running gnome on xorg:
kayzoka@fedora:~$ ls -l /sys/class/drm/card*/edid
-r--r--r--. 1 root root 0 May 2 10:46 /sys/class/drm/card0-DP-1/edid
-r--r--r--. 1 root root 0 May 2 10:46 /sys/class/drm/card0-DP-2/edid
-r--r--r--. 1 root root 0 May 2 07:45 /sys/class/drm/card0-DP-3/edid
-r--r--r--. 1 root root 0 May 2 10:46 /sys/class/drm/card0-HDMI-A-1/edid
-r--r--r--. 1 root root 0 May 2 10:46 /sys/class/drm/card0-Writeback-1/edidIE. you've never actually tried the LTS kernel?
I tried reinstalling it and re-running grub-mkconfig and it worked this time? Still no signal though
pacman -Qikk linux-lts ls -lR /etc/mkinitcpio.d/ ls -l /boot
[kayzoka@archftw ~]$ pacman -Qikk linux-lts
Name : linux-lts
Version : 6.12.25-2
Description : The LTS Linux kernel and modules
Architecture : x86_64
URL : https://www.kernel.org
Licenses : Apache-2.0 OR MIT
BSD-2-Clause OR GPL-2.0-or-later
BSD-3-Clause
BSD-3-Clause OR GPL-2.0-only
BSD-3-Clause OR GPL-2.0-or-later
BSD-3-Clause-Clear
GPL-1.0-or-later
GPL-1.0-or-later OR BSD-3-Clause
GPL-2.0-only
GPL-2.0-only OR Apache-2.0
GPL-2.0-only OR BSD-2-Clause
GPL-2.0-only OR BSD-3-Clause
GPL-2.0-only OR CDDL-1.0
GPL-2.0-only OR Linux-OpenIB
GPL-2.0-only OR MIT
GPL-2.0-only OR MPL-1.1
GPL-2.0-only OR X11
GPL-2.0-only WITH Linux-syscall-note
GPL-2.0-or-later
GPL-2.0-or-later OR BSD-2-Clause
GPL-2.0-or-later OR BSD-3-Clause
GPL-2.0-or-later OR MIT
GPL-2.0-or-later OR X11
GPL-2.0-or-later WITH GCC-exception-2.0
ISC LGPL-2.0-or-later
LGPL-2.1-only
LGPL-2.1-only OR BSD-2-Clause
LGPL-2.1-or-later MIT MPL-1.1
X11 Zlib
Groups : None
Provides : KSMBD-MODULE
VIRTUALBOX-GUEST-MODULES
WIREGUARD-MODULE
Depends On : coreutils initramfs kmod
Optional Deps : wireless-regdb: to set the correct
wireless channels of your country
linux-firmware: firmware images
needed for some devices [installed]
scx-scheds: to use sched-ext
schedulers
Required By : None
Optional For : None
Conflicts With : None
Replaces : wireguard-lts
Installed Size : 138.24 MiB
Packager : Frederik Schwan
<freswa@archlinux.org>
Build Date : Tue 29 Apr 2025 12:49:19 PM MSK
Install Date : Fri 02 May 2025 10:40:46 AM MSK
Install Reason : Explicitly installed
Install Script : No
Validated By : Signature
linux-lts: 7401 total files, 0 altered files
[kayzoka@archftw ~]$ ls -lR /etc/mkinitcpio.d/
/etc/mkinitcpio.d/:
total 8
-rw-r--r-- 1 root root 551 May 2 10:40 linux-lts.preset
-rw-r--r-- 1 root root 527 May 1 12:30 linux.preset
[kayzoka@archftw ~]$ ls -l /boot
total 372108
drwxr-xr-x 3 root root 4096 Apr 26 14:24 EFI
drwxr-xr-x 6 root root 4096 May 2 10:42 grub
-rwxr-xr-x 1 root root 131330373 May 1 12:30 initramfs-linux-fallback.img
-rwxr-xr-x 1 root root 38768145 May 1 12:30 initramfs-linux.img
-rwxr-xr-x 1 root root 132589693 May 2 10:41 initramfs-linux-lts-fallback.img
-rwxr-xr-x 1 root root 39310731 May 2 10:40 initramfs-linux-lts.img
-rwxr-xr-x 1 root root 9683968 Feb 11 20:09 intel-ucode.img
-rwxr-xr-x 1 root root 15446528 May 1 12:30 vmlinuz-linux
-rwxr-xr-x 1 root root 13881856 May 2 10:40 vmlinuz-linux-ltsAnd what's the exact grub-mkconfig command you ran and what does it print out?
[kayzoka@archftw ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-lts
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-lts.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-lts-fallback.img
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-fallback.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
Adding boot menu entry for UEFI Firmware Settings ...
doneOffline