You are not logged in.

Pages: 1

#1 2025-08-08 13:38:34

leder
Member
Registered: 2025-08-08
Posts: 4

Intel Corporation Sunrise Point-LP HD Audio (rev 21)

Hello all,

thank you for arch!

I suppose to have a kernel module issue for the above device (from `lspci`):
internal speaker audio is not working!

As I can hear HDMI audio there is an issue with the internal device.

I am on latest kernel 6.16.0-5-cachyos

Please have a look!

Kind regards
Gerrit

P. S. lsmod gives the following:

snd_intel_dspcfg       45056  2 snd_soc_avs,snd_hda_intel

Last edited by leder (2025-08-08 13:40:14)

Offline

#2 2025-08-08 17:39:49

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,981

Re: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

Install sof-firmware and reboot. Also is that kernel just installed or are you actually on CachyOS? In which case you'd have to ask on their boards for help.

If installing sof-firmware wasn't sufficient post a journal: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

Last edited by V1del (2025-08-08 17:44:14)

Offline

#3 2025-08-08 18:32:39

leder
Member
Registered: 2025-08-08
Posts: 4

Re: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

http://0x0.st/8FH9.txt

Offline

#4 2025-08-08 18:40:19

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,981

Re: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

What do you get from 

aplay -lL
amixer -c0 # or whatever card index from aplay -l
pactl list cards
pactl list sinks

the card is properly detected it seems but the speaker out muted, which could just be a profile selection issue. What have you used to find out that it doesn't work?

Offline

#5 2025-08-08 20:57:14

leder
Member
Registered: 2025-08-08
Posts: 4

Re: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

I tested with gnome-control-center: audio

❯ pactl list sinks

Sink #110
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3.hdmi-stereo
	Description: Internes Audio Digitales Stereo (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3.hdmi-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0298,144dc14f,00100103 HDA:8086280b,80860101,00100000"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HDA Intel PCH at 0xdf638000 irq 134"
		alsa.mixer_name = "Realtek ALC298"
		alsa.name = "HDMI 0"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA Intel PCH at 0xdf638000 irq 134"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hdmi:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "7"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "54"
		device.profile.description = "Digitales Stereo (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		iec958.codecs = "[\"PCM\"]"
		media.class = "Audio/Sink"
		device.description = "Internes Audio"
		node.name = "alsa_output.pci-0000_00_1f.3.hdmi-stereo"
		node.nick = "HDMI 0"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:PCH:7:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "48"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "60"
		object.serial = "110"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "6754017"
		device.product.id = "0x9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 4, available)
	Active Port: hdmi-output-0
	Formats:
		pcm
❯ pactl list cards

Card #53
	Name: alsa_card.usb-046d_Logitech_Webcam_C930e_198DAAAE-02
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "Logitech Webcam C930e at usb-0000:00:14.0-4.1.4.1, high speed"
		api.alsa.card.name = "Logitech Webcam C930e"
		api.alsa.path = "hw:1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-046d_Logitech_Webcam_C930e_198DAAAE-02"
		device.bus_path = "pci-0000:00:14.0-usb-0:4.1.4.1:1.2"
		device.description = "Webcam C930e"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.icon_name = "camera-web-analog-usb"
		device.name = "alsa_card.usb-046d_Logitech_Webcam_C930e_198DAAAE-02"
		device.nick = "Logitech Webcam C930e"
		device.plugged.usec = "7228134"
		device.product.id = "0x0843"
		device.product.name = "Webcam C930e"
		device.serial = "046d_Logitech_Webcam_C930e_198DAAAE"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.4/1-4.1.4.1/1-4.1.4.1:1.2/sound/card1"
		device.vendor.id = "0x046d"
		device.vendor.name = "Logitech, Inc."
		media.class = "Audio/Device"
		spa.object.id = "4"
		factory.id = "15"
		client.id = "48"
		object.id = "53"
		object.serial = "53"
		object.path = "alsa:acp:C930e"
		alsa.card = "1"
		alsa.card_name = "Logitech Webcam C930e"
		alsa.long_card_name = "Logitech Webcam C930e at usb-0000:00:14.0-4.1.4.1, high speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0843"
		alsa.id = "C930e"
		device.string = "1"
	Profiles:
		off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
		input:analog-stereo: Analoges Stereo-Eingang (sinks: 0, sources: 1, priority: 65, available: yes)
		input:iec958-stereo: Digitales Stereo (IEC958)-Eingang (sinks: 0, sources: 1, priority: 55, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: input:analog-stereo
	Ports:
		analog-input-mic: Mikrofon (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo
		iec958-stereo-input: Digitaleingang (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "1"
			Part of profile(s): input:iec958-stereo

Card #54
	Name: alsa_card.pci-0000_00_1f.3
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA Intel PCH at 0xdf638000 irq 134"
		api.alsa.card.name = "HDA Intel PCH"
		api.alsa.path = "hw:0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3"
		device.description = "Internes Audio"
		device.enum.api = "udev"
		device.form_factor = "internal"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3"
		device.nick = "HDA Intel PCH"
		device.plugged.usec = "6754017"
		device.product.id = "0x9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "48"
		object.id = "54"
		object.serial = "54"
		object.path = "alsa:acp:PCH"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf638000 irq 134"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC298"
		alsa.components = "HDA:10ec0298,144dc14f,00100103 HDA:8086280b,80860101,00100000"
		alsa.id = "PCH"
		device.string = "0"
	Profiles:
		off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analoges Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analoges Stereo-Ausgabe (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:hdmi-stereo+input:analog-stereo: Digitales Stereo (HDMI)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 5965, available: yes)
		output:hdmi-stereo: Digitales Stereo (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 5765, available: no)
		output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 5765, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 865, available: yes)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 865, available: yes)
		output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: yes)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: yes)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3)-Ausgabe + Analoges Stereo-Eingang (sinks: 1, sources: 1, priority: 665, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
		input:analog-stereo: Analoges Stereo-Eingang (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 4, sources: 1, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo+input:analog-stereo
	Ports:
		analog-input-internal-mic: Internes Mikrofon (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
		analog-input-mic: Mikrofon (type: Mic, priority: 8700, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo
		analog-output-speaker: Lautsprecher (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, availability unknown)
			Properties:
				port.type = "speaker"
				port.availability-group = "Legacy 3"
				device.icon_name = "audio-speakers"
				card.profile.port = "2"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
				device.product.name = "AORUS FO32U2P"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
❯ amixer -c0
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 127
  Mono:
  Front Left: Playback 127 [100%] [0.00dB] [on]
  Front Right: Playback 127 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',1
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'IEC958',2
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 127
  Front Left: Capture 127 [100%] [30.00dB] [on]
  Front Right: Capture 127 [100%] [30.00dB] [on]
Simple mixer control 'Internal Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 3 [100%] [30.00dB]
  Front Right: 3 [100%] [30.00dB]
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
❯ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC298 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    Front output / input
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC298 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, AORUS FO32U2P
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
usbstream:CARD=C930e
    Logitech Webcam C930e
    USB Stream Output
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC298 Analog [ALC298 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [AORUS FO32U2P]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 7: HDMI 1 [HDMI 1]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 8: HDMI 2 [HDMI 2]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0

Last edited by leder (2025-08-09 11:41:31)

Offline

#6 2025-08-27 23:27:19

leder
Member
Registered: 2025-08-08
Posts: 4

Re: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

Can you please file a kernel bug for this issue as it is distribution agnostic: I tested with cachy OS - arch based - and mint - Ubuntu based

Thank you in advance!

Offline

Pages: 1

Board footer

Powered by FluxBB