You are not logged in.

Pages: 1

#1 2025-10-14 15:25:00

vladosnx
Member
Registered: 2025-10-14
Posts: 4

[SOLVED] startx gets stuck without errors

Hello,

A few days ago my NVIDIA GPU just died and I switched to integrated Intel Graphics (UHD 730).

After that i tried to start openbox and xfce4 using startx, but first time my PC just got stuck at "loading" state and didn't react to hotkeys like CTRL+ALT+F3. I tried to use Xorg config with Intel driver support (i pasted it below), but after I applied it my monitor didn't receive any signal from graphics card, but now i can use hotkeys like CTRL+ALT+F3. This config is:

Section "Device"
    Identifier  "Intel Graphics"
    Driver      "intel"
    Option      "AccelMethod" "uxa"
    Option      "DRI" "3"
EndSection

I also tried to add i915.modeset=1 to GRUB boot options and set "intel" driver to "modeset", but it didn't change anything. /var/log/Xorg.*.log doesn't contain any errors.

I think this can be result of changing my GPU, and it's important to note that Wayland (on GNOME) works normally.

Thanks for your attention.

(Sorry if this text has any mistakes)

Last edited by vladosnx (2025-10-14 20:08:02)

Offline

#2 2025-10-14 15:36:55

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 69,138

Re: [SOLVED] startx gets stuck without errors

Remove that config, any xf86-video-intel package you might have installed and the please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2025-10-14 15:54:46

vladosnx
Member
Registered: 2025-10-14
Posts: 4

Re: [SOLVED] startx gets stuck without errors

I tried to run cat /var/log/Xorg.2.log | grep EE

[  2835.642] Current Operating System: Linux vnxarch 6.17.1-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 06 Oct 2025 18:48:29 +0000 x86_64
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2835.662] (II) Initializing extension MIT-SCREEN-SAVER

And i tried grep WW:

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2835.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[  2835.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[  2835.654] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  2835.654] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2835.654] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  2835.654] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  2835.659] (WW) Falling back to old probe method for dummy
~ [22:55:24] vladosnx

And there aren't any log files in ~/.local/share/xorg

Last edited by vladosnx (2025-10-14 16:09:52)

Offline

#4 2025-10-14 17:37:27

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,084

Re: [SOLVED] startx gets stuck without errors

Post the actual log, don't grep.

Offline

#5 2025-10-14 18:22:09

vladosnx
Member
Registered: 2025-10-14
Posts: 4

Re: [SOLVED] startx gets stuck without errors

Okay, I didn't want to post it because it's too large

[  2835.641] 
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[  2835.642] Current Operating System: Linux vnxarch 6.17.1-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 06 Oct 2025 18:48:29 +0000 x86_64
[  2835.642] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3d743264-761e-4633-991a-9f14599d1ea8 rw loglevel=3 quiet
[  2835.644]  
[  2835.645] Current version of pixman: 0.46.4
[  2835.647] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[  2835.647] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2835.650] (==) Log file: "/var/log/Xorg.2.log", Time: Tue Oct 14 22:48:39 2025
[  2835.651] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2835.652] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2835.653] (==) No Layout section.  Using the first Screen section.
[  2835.653] (**) |-->Screen "DummyScreen" (0)
[  2835.653] (**) |   |-->Monitor "DummyMonitor"
[  2835.653] (**) |   |-->Device "DummyDevice"
[  2835.653] (**) Allowing byte-swapped clients
[  2835.653] (==) Automatically adding devices
[  2835.653] (==) Automatically enabling devices
[  2835.653] (==) Automatically adding GPU devices
[  2835.653] (==) Automatically binding GPU devices
[  2835.653] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2835.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[  2835.654] 	Entry deleted from font path.
[  2835.654] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[  2835.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[  2835.654] 	Entry deleted from font path.
[  2835.654] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[  2835.654] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  2835.654] 	Entry deleted from font path.
[  2835.654] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2835.654] 	Entry deleted from font path.
[  2835.654] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  2835.654] 	Entry deleted from font path.
[  2835.654] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  2835.654] 	Entry deleted from font path.
[  2835.654] (==) FontPath set to:
	
[  2835.654] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2835.654] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2835.654] (II) Module ABI versions:
[  2835.654] 	X.Org ANSI C Emulation: 0.4
[  2835.654] 	X.Org Video Driver: 25.2
[  2835.654] 	X.Org XInput driver : 24.4
[  2835.654] 	X.Org Server Extension : 10.0
[  2835.654] (++) using VT number 3

[  2835.654] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_35
[  2835.655] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2835.655] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[  2835.655] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[  2835.656] (--) PCI:*(0@0:2:0) 8086:4692:1462:7d46 rev 12, Mem @ 0x71000000/16777216, 0x80000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[  2835.656] (II) LoadModule: "glx"
[  2835.658] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2835.659] (II) Module glx: vendor="X.Org Foundation"
[  2835.659] 	compiled for 1.21.1.18, module version = 1.0.0
[  2835.659] 	ABI class: X.Org Server Extension, version 10.0
[  2835.659] (II) LoadModule: "dummy"
[  2835.659] (II) Loading /usr/lib/xorg/modules/drivers/dummy_drv.so
[  2835.659] (II) Module dummy: vendor="X.Org Foundation"
[  2835.659] 	compiled for 1.21.1.11, module version = 0.4.1
[  2835.659] 	Module class: X.Org Video Driver
[  2835.659] 	ABI class: X.Org Video Driver, version 25.2
[  2835.659] (II) DUMMY: Driver for Dummy chipsets: dummy
[  2835.659] (WW) Falling back to old probe method for dummy
[  2835.659] (II) DUMMY(0): Chipset is a DUMMY
[  2835.659] (**) DUMMY(0): Depth 24, (--) framebuffer bpp 32
[  2835.659] (==) DUMMY(0): RGB weight 888
[  2835.659] (==) DUMMY(0): Default visual is TrueColor
[  2835.659] (==) DUMMY(0): Using gamma correction (1.0, 1.0, 1.0)
[  2835.659] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[  2835.659] (**) DUMMY(0): VideoRAM: 256000 kByte
[  2835.659] (--) DUMMY(0): Max Clock: 300000 kHz
[  2835.659] (II) DUMMY(0): DummyMonitor: Using hsync range of 30.00-70.00 kHz
[  2835.659] (II) DUMMY(0): DummyMonitor: Using vrefresh range of 50.00-75.00 Hz
[  2835.659] (II) DUMMY(0): Clock range:  11.00 to 300.00 MHz
[  2835.659] (II) DUMMY(0): Not using default mode "640x350" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "320x175" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x400" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "320x200" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "720x400" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "360x200" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x480" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "320x240" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "400x300" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x768i" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "512x384i" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x768" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "512x384" (vrefresh out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x960" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x480" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x1024" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x512" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x1024" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x512" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "800x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1792x1344" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "896x672" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1792x1344" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "896x672" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1856x1392" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "928x696" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1856x1392" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "928x696" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1920x1440" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1920x1440" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1400x1050" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "700x525" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "960x720" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1536" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x768" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "640x360" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "640x360" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "720x405" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "720x405" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "360x202" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "864x486" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "960x540" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x720" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1368x768" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x900" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1152" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x576" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1152" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1024x576" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1440" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x720" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x720" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2880x1620" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1440x810" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2880x1620" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1440x810" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "3200x1800" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x900" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "3200x1800" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1600x900" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "4096x2304" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "4096x2304" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "2048x1152" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "5120x2880" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "5120x2880" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "15360x8640" (insufficient memory for mode)
[  2835.659] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "15360x8640" (insufficient memory for mode)
[  2835.659] (II) DUMMY(0): Not using default mode "7680x4320" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x800" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1400x900" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
[  2835.659] (II) DUMMY(0): Not using default mode "1920x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "960x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1920x1200" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "960x600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1600" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x800" (hsync out of range)
[  2835.659] (II) DUMMY(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
[  2835.659] (II) DUMMY(0): Not using default mode "1280x800" (hsync out of range)
[  2835.659] (II) DUMMY(0): Virtual size is 1920x1080 (pitch 1920)
[  2835.659] (**) DUMMY(0): *Mode "1920x1080": 148.5 MHz, 67.5 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 (67.5 kHz z)
[  2835.659] (**) DUMMY(0):  Default mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1600x900": 118.2 MHz, 56.0 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1400x900": 103.5 MHz, 56.0 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1368x768": 85.2 MHz, 47.8 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1280x800": 83.5 MHz, 49.7 kHz, 59.8 Hz
[  2835.659] (II) DUMMY(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1280x720": 74.5 MHz, 44.8 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[  2835.659] (II) DUMMY(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[  2835.659] (II) DUMMY(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "960x540": 69.2 MHz, 66.6 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "960x540": 86.5 MHz, 67.2 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz
[  2835.659] (II) DUMMY(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[  2835.659] (II) DUMMY(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[  2835.659] (II) DUMMY(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[  2835.659] (II) DUMMY(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "864x486": 32.5 MHz, 30.3 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "800x450": 59.1 MHz, 56.0 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "700x450": 51.8 MHz, 56.0 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[  2835.659] (II) DUMMY(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[  2835.659] (II) DUMMY(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[  2835.659] (II) DUMMY(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "684x384": 42.6 MHz, 47.8 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x400": 35.5 MHz, 49.3 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x400": 41.8 MHz, 49.7 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "640x360": 37.2 MHz, 44.8 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "512x288": 23.2 MHz, 35.9 kHz, 60.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "512x288": 21.0 MHz, 35.5 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "480x270": 18.6 MHz, 33.3 kHz, 59.8 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "480x270": 20.4 MHz, 33.5 kHz, 59.6 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "432x243": 16.2 MHz, 30.3 kHz, 59.9 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "432x243": 15.2 MHz, 29.8 kHz, 59.6 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[  2835.659] (**) DUMMY(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[  2835.659] (II) DUMMY(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2835.659] (==) DUMMY(0): DPI set to (96, 96)
[  2835.659] (II) Loading sub module "fb"
[  2835.659] (II) LoadModule: "fb"
[  2835.659] (II) Module "fb" already built-in
[  2835.659] (II) Loading sub module "ramdac"
[  2835.659] (II) LoadModule: "ramdac"
[  2835.660] (II) Module "ramdac" already built-in
[  2835.660] (II) DUMMY(0): Output DUMMY0 using monitor section DummyMonitor
[  2835.660] (II) DUMMY(0): Output DUMMY0 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d6c540) and output DUMMY0 (0x556781d6d010)
[  2835.660] (II) DUMMY(0): Output DUMMY1 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d6d470) and output DUMMY1 (0x556781d6d930)
[  2835.660] (II) DUMMY(0): Output DUMMY2 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d769f0) and output DUMMY2 (0x556781d6da10)
[  2835.660] (II) DUMMY(0): Output DUMMY3 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d77800) and output DUMMY3 (0x556781d6daf0)
[  2835.660] (II) DUMMY(0): Output DUMMY4 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d78610) and output DUMMY4 (0x556781d790e0)
[  2835.660] (II) DUMMY(0): Output DUMMY5 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d79500) and output DUMMY5 (0x556781d79fd0)
[  2835.660] (II) DUMMY(0): Output DUMMY6 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7a430) and output DUMMY6 (0x556781d7af00)
[  2835.660] (II) DUMMY(0): Output DUMMY7 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7b320) and output DUMMY7 (0x556781d7bdf0)
[  2835.660] (II) DUMMY(0): Output DUMMY8 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7c260) and output DUMMY8 (0x556781d7cd30)
[  2835.660] (II) DUMMY(0): Output DUMMY9 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7d150) and output DUMMY9 (0x556781d7dc80)
[  2835.660] (II) DUMMY(0): Output DUMMY10 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7e100) and output DUMMY10 (0x556781d7ebd0)
[  2835.660] (II) DUMMY(0): Output DUMMY11 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7eff0) and output DUMMY11 (0x556781d7fb30)
[  2835.660] (II) DUMMY(0): Output DUMMY12 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d7ffc0) and output DUMMY12 (0x556781d80a90)
[  2835.660] (II) DUMMY(0): Output DUMMY13 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d80eb0) and output DUMMY13 (0x556781d81a00)
[  2835.660] (II) DUMMY(0): Output DUMMY14 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d81ea0) and output DUMMY14 (0x556781d82970)
[  2835.660] (II) DUMMY(0): Output DUMMY15 has no monitor section
[  2835.660] (II) DUMMY(0): Created crtc (0x556781d82d90) and output DUMMY15 (0x556781d838f0)
[  2835.660] (II) DUMMY(0): Not using default mode "960x540" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "960x540" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "840x525" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "700x525" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "800x450" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "640x512" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "700x450" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "640x480" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "684x384" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "640x400" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "640x400" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "576x432" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "640x360" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "512x384" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "512x384" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "512x384" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "512x288" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "512x288" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "416x312" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "480x270" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "480x270" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "400x300" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "400x300" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "400x300" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "400x300" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "432x243" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "432x243" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "320x240" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "320x240" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Not using default mode "320x240" (doublescan mode not supported)
[  2835.660] (II) DUMMY(0): Printing probed modes for output DUMMY0
[  2835.660] (II) DUMMY(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 (67.5 kHz UzP)
[  2835.660] (II) DUMMY(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz d)
[  2835.660] (II) DUMMY(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2835.660] (II) DUMMY(0): EDID for output DUMMY1
[  2835.660] (II) DUMMY(0): EDID for output DUMMY2
[  2835.660] (II) DUMMY(0): EDID for output DUMMY3
[  2835.660] (II) DUMMY(0): EDID for output DUMMY4
[  2835.660] (II) DUMMY(0): EDID for output DUMMY5
[  2835.660] (II) DUMMY(0): EDID for output DUMMY6
[  2835.660] (II) DUMMY(0): EDID for output DUMMY7
[  2835.660] (II) DUMMY(0): EDID for output DUMMY8
[  2835.660] (II) DUMMY(0): EDID for output DUMMY9
[  2835.660] (II) DUMMY(0): EDID for output DUMMY10
[  2835.660] (II) DUMMY(0): EDID for output DUMMY11
[  2835.660] (II) DUMMY(0): EDID for output DUMMY12
[  2835.660] (II) DUMMY(0): EDID for output DUMMY13
[  2835.660] (II) DUMMY(0): EDID for output DUMMY14
[  2835.660] (II) DUMMY(0): EDID for output DUMMY15
[  2835.660] (II) DUMMY(0): Output DUMMY0 connected
[  2835.660] (II) DUMMY(0): Output DUMMY1 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY2 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY3 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY4 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY5 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY6 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY7 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY8 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY9 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY10 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY11 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY12 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY13 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY14 disconnected
[  2835.660] (II) DUMMY(0): Output DUMMY15 disconnected
[  2835.660] (II) DUMMY(0): Using user preference for initial modes
[  2835.660] (II) DUMMY(0): Output DUMMY0 using initial mode 1920x1080 +0+0
[  2835.661] (II) DUMMY(0): Using 33053 scanlines of offscreen memory 
[  2835.661] (==) DUMMY(0): Backing store enabled
[  2835.661] (==) DUMMY(0): Silken mouse enabled
[  2835.661] (II) Initializing extension Generic Event Extension
[  2835.661] (II) Initializing extension SHAPE
[  2835.661] (II) Initializing extension MIT-SHM
[  2835.661] (II) Initializing extension XInputExtension
[  2835.661] (II) Initializing extension XTEST
[  2835.661] (II) Initializing extension BIG-REQUESTS
[  2835.661] (II) Initializing extension SYNC
[  2835.662] (II) Initializing extension XKEYBOARD
[  2835.662] (II) Initializing extension XC-MISC
[  2835.662] (II) Initializing extension SECURITY
[  2835.662] (II) Initializing extension XFIXES
[  2835.662] (II) Initializing extension RENDER
[  2835.662] (II) Initializing extension RANDR
[  2835.662] (II) Initializing extension COMPOSITE
[  2835.662] (II) Initializing extension DAMAGE
[  2835.662] (II) Initializing extension MIT-SCREEN-SAVER
[  2835.662] (II) Initializing extension DOUBLE-BUFFER
[  2835.662] (II) Initializing extension RECORD
[  2835.662] (II) Initializing extension DPMS
[  2835.662] (II) Initializing extension Present
[  2835.662] (II) Initializing extension DRI3
[  2835.662] (II) Initializing extension X-Resource
[  2835.662] (II) Initializing extension XVideo
[  2835.662] (II) Initializing extension XVideo-MotionCompensation
[  2835.662] (II) Initializing extension GLX
[  2835.662] (II) AIGLX: Screen 0 is not DRI2 capable
[  2835.688] (II) IGLX: Loaded and initialized swrast
[  2835.688] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  2835.688] (II) Initializing extension XFree86-VidModeExtension
[  2835.688] (II) Initializing extension XFree86-DGA
[  2835.688] (II) Initializing extension XFree86-DRI
[  2835.688] (II) Initializing extension DRI2
[  2835.688] (II) DUMMY(0): Setting screen physical size to 508 x 285
[  2835.714] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2835.714] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2835.714] (II) LoadModule: "libinput"
[  2835.714] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2835.715] (II) Module libinput: vendor="X.Org Foundation"
[  2835.715] 	compiled for 1.21.1.13, module version = 1.5.0
[  2835.715] 	Module class: X.Org XInput Driver
[  2835.715] 	ABI class: X.Org XInput driver, version 24.4
[  2835.715] (II) Using input driver 'libinput' for 'Power Button'
[  2835.715] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 22 paused 0
[  2835.715] (**) Power Button: always reports core events
[  2835.715] (**) Option "Device" "/dev/input/event2"
[  2835.716] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  2835.716] (II) event2  - Power Button: device is a keyboard
[  2835.716] (II) event2  - Power Button: device removed
[  2835.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  2835.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2835.717] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  2835.717] (II) event2  - Power Button: device is a keyboard
[  2835.717] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[  2835.717] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2835.717] (II) Using input driver 'libinput' for 'Video Bus'
[  2835.717] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[  2835.717] (**) Video Bus: always reports core events
[  2835.717] (**) Option "Device" "/dev/input/event3"
[  2835.718] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[  2835.718] (II) event3  - Video Bus: device is a keyboard
[  2835.718] (II) event3  - Video Bus: device removed
[  2835.718] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[  2835.718] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2835.718] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[  2835.718] (II) event3  - Video Bus: device is a keyboard
[  2835.718] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2835.718] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2835.718] (II) Using input driver 'libinput' for 'Power Button'
[  2835.719] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[  2835.719] (**) Power Button: always reports core events
[  2835.719] (**) Option "Device" "/dev/input/event1"
[  2835.719] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2835.719] (II) event1  - Power Button: device is a keyboard
[  2835.719] (II) event1  - Power Button: device removed
[  2835.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[  2835.719] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  2835.719] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2835.719] (II) event1  - Power Button: device is a keyboard
[  2835.720] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[  2835.720] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  2835.720] (II) Using input driver 'libinput' for 'Sleep Button'
[  2835.720] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 27 paused 0
[  2835.720] (**) Sleep Button: always reports core events
[  2835.720] (**) Option "Device" "/dev/input/event0"
[  2835.720] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[  2835.720] (II) event0  - Sleep Button: device is a keyboard
[  2835.720] (II) event0  - Sleep Button: device removed
[  2835.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[  2835.720] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  2835.721] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[  2835.721] (II) event0  - Sleep Button: device is a keyboard
[  2835.722] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/event4)
[  2835.722] (**) Compx 2.4G Wireless Receiver: Applying InputClass "libinput keyboard catchall"
[  2835.722] (II) Using input driver 'libinput' for 'Compx 2.4G Wireless Receiver'
[  2835.722] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 28 paused 0
[  2835.722] (**) Compx 2.4G Wireless Receiver: always reports core events
[  2835.722] (**) Option "Device" "/dev/input/event4"
[  2835.722] (II) event4  - Compx 2.4G Wireless Receiver: is tagged by udev as: Keyboard
[  2835.722] (II) event4  - Compx 2.4G Wireless Receiver: device is a keyboard
[  2835.723] (II) event4  - Compx 2.4G Wireless Receiver: device removed
[  2835.723] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/0003:3554:F52D.0001/input/input4/event4"
[  2835.723] (II) XINPUT: Adding extended input device "Compx 2.4G Wireless Receiver" (type: KEYBOARD, id 10)
[  2835.723] (II) event4  - Compx 2.4G Wireless Receiver: is tagged by udev as: Keyboard
[  2835.723] (II) event4  - Compx 2.4G Wireless Receiver: device is a keyboard
[  2835.724] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/event5)
[  2835.724] (II) No input driver specified, ignoring this device.
[  2835.724] (II) This device may have been added with another device file.
[  2835.724] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/event6)
[  2835.724] (II) No input driver specified, ignoring this device.
[  2835.724] (II) This device may have been added with another device file.
[  2835.725] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver Consumer Control (/dev/input/event7)
[  2835.725] (**) Compx 2.4G Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2835.725] (II) Using input driver 'libinput' for 'Compx 2.4G Wireless Receiver Consumer Control'
[  2835.725] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[  2835.725] (**) Compx 2.4G Wireless Receiver Consumer Control: always reports core events
[  2835.725] (**) Option "Device" "/dev/input/event7"
[  2835.726] (II) event7  - Compx 2.4G Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[  2835.726] (II) event7  - Compx 2.4G Wireless Receiver Consumer Control: device is a keyboard
[  2835.726] (II) event7  - Compx 2.4G Wireless Receiver Consumer Control: device removed
[  2835.726] (II) libinput: Compx 2.4G Wireless Receiver Consumer Control: needs a virtual subdevice
[  2835.726] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:3554:F52D.0002/input/input7/event7"
[  2835.726] (II) XINPUT: Adding extended input device "Compx 2.4G Wireless Receiver Consumer Control" (type: MOUSE, id 11)
[  2835.726] (**) Option "AccelerationScheme" "none"
[  2835.726] (**) Compx 2.4G Wireless Receiver Consumer Control: (accel) selected scheme none/0
[  2835.726] (**) Compx 2.4G Wireless Receiver Consumer Control: (accel) acceleration factor: 2.000
[  2835.726] (**) Compx 2.4G Wireless Receiver Consumer Control: (accel) acceleration threshold: 4
[  2835.726] (II) event7  - Compx 2.4G Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[  2835.726] (II) event7  - Compx 2.4G Wireless Receiver Consumer Control: device is a keyboard
[  2835.727] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver System Control (/dev/input/event8)
[  2835.727] (**) Compx 2.4G Wireless Receiver System Control: Applying InputClass "libinput keyboard catchall"
[  2835.727] (II) Using input driver 'libinput' for 'Compx 2.4G Wireless Receiver System Control'
[  2835.727] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30 paused 0
[  2835.727] (**) Compx 2.4G Wireless Receiver System Control: always reports core events
[  2835.727] (**) Option "Device" "/dev/input/event8"
[  2835.728] (II) event8  - Compx 2.4G Wireless Receiver System Control: is tagged by udev as: Keyboard
[  2835.728] (II) event8  - Compx 2.4G Wireless Receiver System Control: device is a keyboard
[  2835.728] (II) event8  - Compx 2.4G Wireless Receiver System Control: device removed
[  2835.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:3554:F52D.0002/input/input8/event8"
[  2835.728] (II) XINPUT: Adding extended input device "Compx 2.4G Wireless Receiver System Control" (type: KEYBOARD, id 12)
[  2835.729] (II) event8  - Compx 2.4G Wireless Receiver System Control: is tagged by udev as: Keyboard
[  2835.729] (II) event8  - Compx 2.4G Wireless Receiver System Control: device is a keyboard
[  2835.729] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/event9)
[  2835.729] (II) No input driver specified, ignoring this device.
[  2835.729] (II) This device may have been added with another device file.
[  2835.730] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/event10)
[  2835.730] (**) Compx 2.4G Wireless Receiver: Applying InputClass "libinput pointer catchall"
[  2835.730] (II) Using input driver 'libinput' for 'Compx 2.4G Wireless Receiver'
[  2835.781] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 31 paused 0
[  2835.781] (**) Compx 2.4G Wireless Receiver: always reports core events
[  2835.781] (**) Option "Device" "/dev/input/event10"
[  2835.785] (II) event10 - Compx 2.4G Wireless Receiver: is tagged by udev as: Mouse
[  2835.785] (II) event10 - Compx 2.4G Wireless Receiver: device is a pointer
[  2835.785] (II) event10 - Compx 2.4G Wireless Receiver: device removed
[  2835.786] (II) libinput: Compx 2.4G Wireless Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2835.786] (II) libinput: Compx 2.4G Wireless Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2835.786] (II) libinput: Compx 2.4G Wireless Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[  2835.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.2/0003:3554:F52D.0003/input/input10/event10"
[  2835.786] (II) XINPUT: Adding extended input device "Compx 2.4G Wireless Receiver" (type: MOUSE, id 13)
[  2835.786] (**) Option "AccelerationScheme" "none"
[  2835.786] (**) Compx 2.4G Wireless Receiver: (accel) selected scheme none/0
[  2835.786] (**) Compx 2.4G Wireless Receiver: (accel) acceleration factor: 2.000
[  2835.786] (**) Compx 2.4G Wireless Receiver: (accel) acceleration threshold: 4
[  2835.789] (II) event10 - Compx 2.4G Wireless Receiver: is tagged by udev as: Mouse
[  2835.790] (II) event10 - Compx 2.4G Wireless Receiver: device is a pointer
[  2835.792] (II) config/udev: Adding input device Compx 2.4G Wireless Receiver (/dev/input/mouse0)
[  2835.792] (II) No input driver specified, ignoring this device.
[  2835.792] (II) This device may have been added with another device file.
[  2835.793] (II) config/udev: Adding input device SONiX USB Keyboard (/dev/input/event11)
[  2835.793] (**) SONiX USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  2835.793] (II) Using input driver 'libinput' for 'SONiX USB Keyboard'
[  2835.795] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 32 paused 0
[  2835.795] (**) SONiX USB Keyboard: always reports core events
[  2835.795] (**) Option "Device" "/dev/input/event11"
[  2835.797] (II) event11 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[  2835.797] (II) event11 - SONiX USB Keyboard: device is a keyboard
[  2835.798] (II) event11 - SONiX USB Keyboard: device removed
[  2835.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:09DA:2268.0004/input/input11/event11"
[  2835.798] (II) XINPUT: Adding extended input device "SONiX USB Keyboard" (type: KEYBOARD, id 14)
[  2835.799] (II) event11 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[  2835.799] (II) event11 - SONiX USB Keyboard: device is a keyboard
[  2835.801] (II) config/udev: Adding input device SONiX USB Keyboard Consumer Control (/dev/input/event12)
[  2835.801] (**) SONiX USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2835.801] (II) Using input driver 'libinput' for 'SONiX USB Keyboard Consumer Control'
[  2835.801] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 33 paused 0
[  2835.801] (**) SONiX USB Keyboard Consumer Control: always reports core events
[  2835.801] (**) Option "Device" "/dev/input/event12"
[  2835.803] (II) event12 - SONiX USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2835.803] (II) event12 - SONiX USB Keyboard Consumer Control: device is a keyboard
[  2835.803] (II) event12 - SONiX USB Keyboard Consumer Control: device removed
[  2835.803] (II) libinput: SONiX USB Keyboard Consumer Control: needs a virtual subdevice
[  2835.803] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.1/0003:09DA:2268.0005/input/input12/event12"
[  2835.803] (II) XINPUT: Adding extended input device "SONiX USB Keyboard Consumer Control" (type: MOUSE, id 15)
[  2835.803] (**) Option "AccelerationScheme" "none"
[  2835.803] (**) SONiX USB Keyboard Consumer Control: (accel) selected scheme none/0
[  2835.803] (**) SONiX USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[  2835.803] (**) SONiX USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[  2835.804] (II) event12 - SONiX USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2835.804] (II) event12 - SONiX USB Keyboard Consumer Control: device is a keyboard
[  2835.805] (II) config/udev: Adding input device SONiX USB Keyboard System Control (/dev/input/event13)
[  2835.805] (**) SONiX USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  2835.805] (II) Using input driver 'libinput' for 'SONiX USB Keyboard System Control'
[  2835.805] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 34 paused 0
[  2835.805] (**) SONiX USB Keyboard System Control: always reports core events
[  2835.805] (**) Option "Device" "/dev/input/event13"
[  2835.806] (II) event13 - SONiX USB Keyboard System Control: is tagged by udev as: Keyboard
[  2835.806] (II) event13 - SONiX USB Keyboard System Control: device is a keyboard
[  2835.806] (II) event13 - SONiX USB Keyboard System Control: device removed
[  2835.806] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.1/0003:09DA:2268.0005/input/input13/event13"
[  2835.806] (II) XINPUT: Adding extended input device "SONiX USB Keyboard System Control" (type: KEYBOARD, id 16)
[  2835.807] (II) event13 - SONiX USB Keyboard System Control: is tagged by udev as: Keyboard
[  2835.807] (II) event13 - SONiX USB Keyboard System Control: device is a keyboard
[  2835.807] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event15)
[  2835.807] (II) No input driver specified, ignoring this device.
[  2835.807] (II) This device may have been added with another device file.
[  2835.807] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event16)
[  2835.807] (II) No input driver specified, ignoring this device.
[  2835.807] (II) This device may have been added with another device file.
[  2835.807] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[  2835.807] (II) No input driver specified, ignoring this device.
[  2835.807] (II) This device may have been added with another device file.
[  2835.807] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event18)
[  2835.807] (II) No input driver specified, ignoring this device.
[  2835.807] (II) This device may have been added with another device file.
[  2835.808] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
[  2835.808] (II) No input driver specified, ignoring this device.
[  2835.808] (II) This device may have been added with another device file.
[  2835.808] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event20)
[  2835.808] (II) No input driver specified, ignoring this device.
[  2835.808] (II) This device may have been added with another device file.
[  2835.808] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event21)
[  2835.808] (II) No input driver specified, ignoring this device.
[  2835.808] (II) This device may have been added with another device file.
[  2835.808] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event22)
[  2835.808] (II) No input driver specified, ignoring this device.
[  2835.808] (II) This device may have been added with another device file.
[  2835.808] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event23)
[  2835.808] (II) No input driver specified, ignoring this device.
[  2835.808] (II) This device may have been added with another device file.
[  2835.809] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[  2835.809] (II) No input driver specified, ignoring this device.
[  2835.809] (II) This device may have been added with another device file.
[  2835.812] (**) Compx 2.4G Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2835.812] (II) Using input driver 'libinput' for 'Compx 2.4G Wireless Receiver Consumer Control'
[  2835.812] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[  2835.812] (**) Compx 2.4G Wireless Receiver Consumer Control: always reports core events
[  2835.812] (**) Option "Device" "/dev/input/event7"
[  2835.812] (II) libinput: Compx 2.4G Wireless Receiver Consumer Control: is a virtual subdevice
[  2835.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:3554:F52D.0002/input/input7/event7"
[  2835.812] (II) XINPUT: Adding extended input device "Compx 2.4G Wireless Receiver Consumer Control" (type: KEYBOARD, id 17)
[  2835.812] (**) SONiX USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2835.812] (II) Using input driver 'libinput' for 'SONiX USB Keyboard Consumer Control'
[  2835.812] (II) systemd-logind: returning pre-existing fd for /dev/input/event12 13:76
[  2835.812] (**) SONiX USB Keyboard Consumer Control: always reports core events
[  2835.812] (**) Option "Device" "/dev/input/event12"
[  2835.812] (II) libinput: SONiX USB Keyboard Consumer Control: is a virtual subdevice
[  2835.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.1/0003:09DA:2268.0005/input/input12/event12"
[  2835.812] (II) XINPUT: Adding extended input device "SONiX USB Keyboard Consumer Control" (type: KEYBOARD, id 18)

Last edited by vladosnx (2025-10-14 20:03:48)

Offline

#6 2025-10-14 18:22:49

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 69,138

Re: [SOLVED] startx gets stuck without errors

Before you edited the xorg log out for no reason and despite :2 being an irritating DISPLAY anyway: why are you using the dummy driver?!
https://wiki.archlinux.org/title/Extrem … mmy_driver

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2025-10-14 18:44:25

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 69,138

Re: [SOLVED] startx gets stuck without errors

Please use [code][/code] tags. Edit your post in this regard.
And again: why are we seeing the dummy driver? You've an alder lake IGP.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2025-10-14 20:05:41

vladosnx
Member
Registered: 2025-10-14
Posts: 4

Re: [SOLVED] startx gets stuck without errors

Sorry for my inattention. I tried to configure dummy displays a long time ago, when I wanted to create a virtual monitor using X servers. Deleting it from /etc/X11/xorg.conf.d solved my problem.

Thanks for this advice about code tags, I used Arch Linux forum first time

Offline

#9 2025-10-14 20:07:16

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 69,138

Re: [SOLVED] startx gets stuck without errors

No problem - we nudge everyone in who wants to.

In that light: Please also and always remember to mark resolved threads by editing your initial posts subject - so others will know that there's no task left, but maybe a solution to find.
Thanks.
smile

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB