You are not logged in.
Im trying to use the drive with adapter from laptop sata to normal sata, it doesnt show in bios or in thunar,
sudo dmesg -wshows:
[ 286.979091] ata3.00: limiting speed to UDMA/100:PIO4
[ 287.464254] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 287.499277] ata3.00: configured for UDMA/100
[ 287.547514] scsi 2:0:0:0: CD-ROM hp DVDRW DA8AESH XH6M PQ: 0 ANSI: 5
[ 288.064547] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 288.357354] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 288.357361] ata3.00: revalidation failed (errno=-5)
[ 293.626990] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 293.680470] ata3.00: configured for UDMA/100
[ 294.155164] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 294.429543] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 294.429548] ata3.00: revalidation failed (errno=-5)
[ 299.765023] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 299.787324] ata3.00: configured for UDMA/100
[ 299.792573] ata3.00: limiting speed to UDMA/33:PIO4
[ 300.253191] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 300.270895] ata3.00: configured for UDMA/33
[ 300.789266] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 300.823601] ata3.00: configured for UDMA/33
[ 301.357180] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 301.371402] ata3.00: configured for UDMA/33
[ 301.451614] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 301.451620] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 326.684797] rtw88_8821ce 0000:03:00.0: unhandled firmware c2h interrupt
[ 356.887890] ata3: link is slow to respond, please be patient (ready=0)
[ 361.578602] ata3: found unknown device (class 0)
[ 361.734818] ata3: softreset failed (device not ready)
[ 362.214442] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 377.626702] ata3.00: qc timeout after 15000 msecs (cmd 0xef)
[ 377.626719] ata3.00: failed to set xfermode (err_mask=0x4)
[ 378.097713] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 378.119456] ata3.00: configured for UDMA/33
[ 378.593554] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 378.638325] ata3.00: configured for UDMA/33
[ 386.232129] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 386.503674] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 386.503682] ata3.00: revalidation failed (errno=-5)
[ 391.909508] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)I tried making kernel argument
spectre_v2=off but it didnt help. On laptop that i took it from it worked perfectly, arch seen that drive and was capable of reading things from cds and dvds on this, but on my main pc it doesnt work.
For me its weird that bios doesnt see it but the system does. I enabled in bios sata hot plug.
My pc spec:
GIGABYTE B550M DS3H AC
AMD Ryzen 5 5600
32GB DDR4
rx radeon 6400
256GB SSD Sata 1(System is installed on it with uefi)
1TB HDD Sata 2
hp DVDRW DA8AESH sata 3 (not working properly)
XFCE 4.20, Linux 6.18.5-arch1-1, locale pl_PL.UTF-8
Laptop that it works on:
HP Laptop 15-bs0xx
Has the same xfce settings that i have on my main pc
Doesnt have working screen, thats why i want to move dvd drive to my main pc
"Zwieść cię może ciągnacy ulicami tłum"
Offline