You are not logged in.
At the start of my Arch/KDE session (with KWin on Wayland and pipewire/wireplumber as the audio stack), the front headphone jack on my PC is not working reliably. Occasionally, it works from boot, but most of the time it is silent. Both pavucontrol and the plasma-pa audio manager do show the audio device (USB Audio Front Headphones) and correctly register when headphones are plugged in or unplugged, and show that a sound signal is being send to the device, even if no audio is being heard.
I have external speakers (Creative Pebble X Plus speakers connected by USB) and those work without issue. The headphones I use also work fine on different devices. I have a dual boot setup with Windows (fast startup is disabled) and all audio works there without trouble. I have tested this with Firefox and VLC, and they do not behave any differently with regards to this issue.
There are only two things that seem to resolve the issue, though temporarily: removing ~/.local/state/wireplumber/ and restarting wireplumber.service, and toggling mute in pavucontrol (which is not very reliable; it only works half the time).
I have also happened upon these threads ( https://bbs.archlinux.org/viewtopic.php?id=297210 and https://bbs.archlinux.org/viewtopic.php?id=265732 ) which describe aspects of this issue, and I see the same warnings about the decibel range in my journalctl log: https://0x0.st/PZJI.txt
Here's the output of pactl info while playing audio through Firefox before attempting to reset wireplumber.service or touching pavucontrol:
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 430
Tile Size: 65472
User Name: brain
Host Name: westerlund
Server Name: PulseAudio (on PipeWire 1.4.10)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink
Default Source: alsa_input.usb-046d_Logi_4K_Stream_Edition_97FB023D-03.analog-stereo
Cookie: 56a0:0d7dpactl list cards:
Card #52
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:2"
api.alsa.card = "2"
api.alsa.card.name = "HDA NVidia"
api.alsa.card.longname = "HDA NVidia at 0x84080000 irq 17"
device.plugged.usec = "4681138"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2"
device.bus = "pci"
device.subsystem = "sound"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0x22bc"
device.product.name = "AD104 High Definition Audio Controller"
device.name = "alsa_card.pci-0000_01_00.1"
device.description = "AD104 High Definition Audio Controller"
device.nick = "HDA NVidia"
device.icon_name = "audio-card-analog-pci"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio2"
spa.object.id = "6"
factory.id = "15"
client.id = "46"
object.id = "51"
object.serial = "52"
object.path = "alsa:acp:NVidia"
alsa.card = "2"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x84080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU a5 HDMI/DP"
alsa.components = "HDA:10de00a5,145840c6,00100100"
alsa.id = "NVidia"
device.string = "2"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: yes)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "GP27-FUS"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #53
Name: alsa_card.usb-046d_Logi_4K_Stream_Edition_97FB023D-03
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:0"
api.alsa.card = "0"
api.alsa.card.name = "Logi 4K Stream Edition"
api.alsa.card.longname = "Logi 4K Stream Edition at usb-0000:00:14.0-3, super speed"
device.plugged.usec = "4713094"
device.bus_path = "pci-0000:00:14.0-usb-0:3:1.3"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.3/sound/card0"
device.bus-id = "usb-046d_Logi_4K_Stream_Edition_97FB023D-03"
device.bus = "usb"
device.subsystem = "sound"
device.vendor.id = "0x046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0x086b"
device.product.name = "BRIO 4K Stream Edition"
device.serial = "046d_Logi_4K_Stream_Edition_97FB023D"
device.form_factor = "webcam"
device.name = "alsa_card.usb-046d_Logi_4K_Stream_Edition_97FB023D-03"
device.description = "BRIO 4K Stream Edition"
device.nick = "Logi 4K Stream Edition"
device.icon_name = "camera-web-analog-usb"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio0"
spa.object.id = "2"
factory.id = "15"
client.id = "46"
object.id = "52"
object.serial = "53"
object.path = "alsa:acp:Edition"
alsa.card = "0"
alsa.card_name = "Logi 4K Stream Edition"
alsa.long_card_name = "Logi 4K Stream Edition at usb-0000:00:14.0-3, super speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:086b"
alsa.id = "Edition"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: input:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo
iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "1"
Part of profile(s): input:iec958-stereo
Card #54
Name: alsa_card.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:4"
api.alsa.card = "4"
api.alsa.card.name = "Creative Pebble X Plus"
api.alsa.card.longname = "Creative Technology Ltd Creative Pebble X Plus at usb-0000:00:14.0-7.4, full sp"
device.plugged.usec = "8229601"
device.bus_path = "pci-0000:00:14.0-usb-0:7.4:1.1"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/sound/card4"
device.bus-id = "usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01"
device.bus = "usb"
device.subsystem = "sound"
device.vendor.id = "0x041e"
device.vendor.name = "Creative Technology, Ltd"
device.product.id = "0x329a"
device.product.name = "Creative Pebble X Plus"
device.serial = "Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0"
device.name = "alsa_card.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01"
device.description = "Creative Pebble X Plus"
device.nick = "Creative Pebble X Plus"
device.icon_name = "audio-card-analog-usb"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio4"
spa.object.id = "10"
factory.id = "15"
client.id = "46"
object.id = "53"
object.serial = "54"
object.path = "alsa:acp:Plus"
alsa.card = "4"
alsa.card_name = "Creative Pebble X Plus"
alsa.long_card_name = "Creative Technology Ltd Creative Pebble X Plus at usb-0000:00:14.0-7.4, full sp"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB041e:329a"
alsa.id = "Plus"
device.string = "4"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:mono-fallback: Analog Stereo Output + Mono Input (sinks: 1, sources: 1, priority: 6501, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:iec958-stereo+input:mono-fallback: Digital Stereo (IEC958) Output + Mono Input (sinks: 1, sources: 1, priority: 5501, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
Properties:
port.type = "mic"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:mono-fallback, output:analog-stereo+input:mono-fallback, output:iec958-stereo+input:mono-fallback
analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
Properties:
port.type = "analog"
card.profile.port = "1"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:mono-fallback
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "2"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:mono-fallback
Card #55
Name: alsa_card.usb-Generic_USB_Audio-00
Driver: alsa
Owner Module: n/a
Properties:
device.enum.api = "udev"
device.api = "alsa"
media.class = "Audio/Device"
api.alsa.path = "hw:3"
api.alsa.card = "3"
api.alsa.card.name = "USB Audio"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
device.plugged.usec = "8223743"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card3"
device.bus-id = "usb-Generic_USB_Audio-00"
device.bus = "usb"
device.subsystem = "sound"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.description = "USB Audio"
device.nick = "USB Audio"
device.icon_name = "audio-card-analog-usb"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio3"
spa.object.id = "8"
factory.id = "15"
client.id = "46"
object.id = "54"
object.serial = "55"
object.path = "alsa:acp:Audio"
alsa.card = "3"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB26ce:0a08"
alsa.id = "Audio"
device.string = "3"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
HiFi: HiFi 2.0 channels (sinks: 3, sources: 2, priority: 9300, available: yes)
HiFi 7+1: HiFi 7.1 channels (sinks: 3, sources: 2, priority: 1300, available: yes)
HiFi 5+1: HiFi 5.1 channels (sinks: 3, sources: 2, priority: 1300, available: yes)
pro-audio: Pro Audio (sinks: 4, sources: 2, priority: 1, available: yes)
Active Profile: HiFi
Ports:
[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
device.icon_name = "audio-speakers"
card.profile.port = "0"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[Out] Speaker: Speakers (type: Speaker, priority: 200, latency offset: 0 usec, availability group: Speaker - Output, not available)
Properties:
port.type = "speaker"
port.availability-group = "Speaker - Output"
device.icon_name = "audio-speakers"
card.profile.port = "1"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[Out] Headphones: Front Headphones (type: Headphones, priority: 300, latency offset: 0 usec, availability group: Headphone - Output, available)
Properties:
port.type = "headphones"
port.availability-group = "Headphone - Output"
device.icon_name = "audio-headphones"
card.profile.port = "2"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[In] Mic1: Rear Input (type: Mic, priority: 300, latency offset: 0 usec, availability group: Mic - Input, not available)
Properties:
port.type = "mic"
port.availability-group = "Mic - Input"
device.icon_name = "audio-input-microphone"
card.profile.port = "3"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
[In] Mic2: Front Microphone (type: Mic, priority: 400, latency offset: 0 usec, availability group: Front Mic - Input, availability unknown)
Properties:
port.type = "mic"
port.availability-group = "Front Mic - Input"
device.icon_name = "audio-input-microphone"
card.profile.port = "4"
Part of profile(s): HiFi 7+1, HiFi 5+1, HiFipactl list sinks:
Sink #64
State: SUSPENDED
Name: alsa_output.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01.analog-stereo
Description: Creative Pebble X Plus Analog Stereo
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26213 / 40% / -23.88 dB, front-right: 26213 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:Plus:3:playback"
api.alsa.path = "front:4"
api.alsa.pcm.card = "4"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-card-analog"
device.bus = "usb"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.resolution_bits = "16"
alsa.card = "4"
alsa.card_name = "Creative Pebble X Plus"
alsa.long_card_name = "Creative Technology Ltd Creative Pebble X Plus at usb-0000:00:14.0-7.4, full sp"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB041e:329a"
alsa.id = "Plus"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
card.profile.device = "3"
device.id = "53"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "1109"
priority.session = "1109"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01.analog-stereo"
node.nick = "Creative Pebble X Plus"
device.description = "Creative Pebble X Plus"
api.alsa.card.name = "Creative Pebble X Plus"
api.alsa.card.longname = "Creative Technology Ltd Creative Pebble X Plus at usb-0000:00:14.0-7.4, full sp"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "63"
object.serial = "64"
device.enum.api = "udev"
api.alsa.card = "4"
device.plugged.usec = "8229601"
device.bus_path = "pci-0000:00:14.0-usb-0:7.4:1.1"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/sound/card4"
device.bus-id = "usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01"
device.subsystem = "sound"
device.vendor.id = "0x041e"
device.vendor.name = "Creative Technology, Ltd"
device.product.id = "0x329a"
device.product.name = "Creative Pebble X Plus"
device.serial = "Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0"
device.name = "alsa_card.usb-Creative_Technology_Ltd_Creative_Pebble_X_Plus_MINION-MX-DEV-SN0-01"
device.nick = "Creative Pebble X Plus"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio4"
spa.object.id = "10"
device.string = "4"
Ports:
analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
Active Port: analog-output
Formats:
pcm
Sink #65
State: SUSPENDED
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink
Description: USB Audio S/PDIF Output
Driver: PipeWire
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:Audio:10:playback"
api.alsa.path = "hw:Audio,3"
api.alsa.open.ucm = "true"
api.alsa.pcm.card = "3"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-speakers"
device.bus = "usb"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.mixer_device = "_ucm0007.hw:Audio"
alsa.resolution_bits = "16"
alsa.card = "3"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB26ce:0a08"
alsa.id = "Audio"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio #3"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "HiFi: SPDIF: sink"
device.profile.description = "S/PDIF Output"
card.profile.device = "10"
device.id = "54"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "796"
priority.session = "796"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__SPDIF__sink"
node.nick = "USB Audio #3"
device.description = "USB Audio"
api.alsa.card.name = "USB Audio"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "34"
object.serial = "65"
device.enum.api = "udev"
api.alsa.card = "3"
device.plugged.usec = "8223743"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card3"
device.bus-id = "usb-Generic_USB_Audio-00"
device.subsystem = "sound"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio3"
spa.object.id = "8"
device.string = "3"
Ports:
[Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, availability unknown)
Active Port: [Out] SPDIF
Formats:
pcm
Sink #66
State: SUSPENDED
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink
Description: USB Audio Speakers
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:Audio:11:playback"
api.alsa.path = "hw:Audio"
api.alsa.open.ucm = "true"
api.alsa.pcm.card = "3"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-speakers"
device.bus = "usb"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.mixer_device = "_ucm0007.hw:Audio"
alsa.resolution_bits = "16"
alsa.card = "3"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB26ce:0a08"
alsa.id = "Audio"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "HiFi: Speaker: sink"
device.profile.description = "Speakers"
card.profile.device = "11"
device.id = "54"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "1100"
priority.session = "1100"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__Speaker__sink"
node.nick = "USB Audio"
device.description = "USB Audio"
api.alsa.card.name = "USB Audio"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "45"
object.serial = "66"
device.enum.api = "udev"
api.alsa.card = "3"
device.plugged.usec = "8223743"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card3"
device.bus-id = "usb-Generic_USB_Audio-00"
device.subsystem = "sound"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio3"
spa.object.id = "8"
device.string = "3"
Ports:
[Out] Speaker: Speakers (type: Speaker, priority: 200, availability group: Speaker - Output, not available)
Active Port: [Out] Speaker
Formats:
pcm
Sink #67
State: RUNNING
Name: alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink
Description: USB Audio Front Headphones
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 26214 / 40% / -23.88 dB, front-right: 26214 / 40% / -23.88 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY
Properties:
object.path = "alsa:acp:Audio:12:playback"
api.alsa.path = "hw:Audio,1"
api.alsa.open.ucm = "true"
api.alsa.pcm.card = "3"
api.alsa.pcm.stream = "playback"
port.group = "playback"
device.icon_name = "audio-headphones"
device.bus = "usb"
audio.channels = "2"
audio.position = "FL,FR"
device.routes = "1"
alsa.mixer_device = "_ucm0007.hw:Audio"
alsa.resolution_bits = "16"
alsa.card = "3"
alsa.card_name = "USB Audio"
alsa.long_card_name = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
alsa.driver_name = "snd_usb_audio"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB26ce:0a08"
alsa.id = "Audio"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio #1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.sync.id = "00000000:00000000:00000000:00000000"
device.profile.name = "HiFi: Headphones: sink"
device.profile.description = "Front Headphones"
card.profile.device = "12"
device.id = "54"
factory.name = "api.alsa.pcm.sink"
node.pause-on-idle = "false"
priority.driver = "828"
priority.session = "828"
media.class = "Audio/Sink"
node.name = "alsa_output.usb-Generic_USB_Audio-00.HiFi__Headphones__sink"
node.nick = "USB Audio #1"
device.description = "USB Audio"
api.alsa.card.name = "USB Audio"
api.alsa.card.longname = "Generic USB Audio at usb-0000:00:14.0-6, high speed"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "43"
object.serial = "67"
node.max-latency = "16384/48000"
api.alsa.period-size = "512"
api.alsa.period-num = "64"
api.alsa.headroom = "512"
device.enum.api = "udev"
api.alsa.card = "3"
device.plugged.usec = "8223743"
device.bus_path = "pci-0000:00:14.0-usb-0:6:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/sound/card3"
device.bus-id = "usb-Generic_USB_Audio-00"
device.subsystem = "sound"
device.vendor.id = "0x26ce"
device.vendor.name = "Generic"
device.product.id = "0x0a08"
device.product.name = "USB Audio"
device.serial = "Generic_USB_Audio"
device.name = "alsa_card.usb-Generic_USB_Audio-00"
device.nick = "USB Audio"
api.alsa.use-acp = "true"
api.acp.auto-profile = "false"
api.acp.auto-port = "false"
api.dbus.ReserveDevice1.Priority = "-20"
api.alsa.split-enable = "true"
api.dbus.ReserveDevice1 = "Audio3"
spa.object.id = "8"
device.string = "3"
Ports:
[Out] Headphones: Front Headphones (type: Headphones, priority: 300, availability group: Headphone - Output, available)
Active Port: [Out] Headphones
Formats:
pcmI have also found that pipewire-pulse.service appears to be expecting pulseaudio.service to be present, but it is not present on my system:
● pipewire-pulse.service - PipeWire PulseAudio
Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
Active: active (running) since Sat 2026-01-24 23:58:27 CST; 17min ago
Invocation: 950c5741954e408fbf0962f10e4bf39c
TriggeredBy: ● pipewire-pulse.socket
Main PID: 981 (pipewire-pulse)
Tasks: 3 (limit: 38080)
Memory: 35.9M (peak: 56.8M)
CPU: 16.402s
CUnit pulseaudio.service could not be found.
Group: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
└─981 /usr/bin/pipewire-pulseand here's all of the relevant audio packages I have installed:
kpipewire 6.5.5-1
libpipewire 1:1.4.10-1
libwireplumber 0.5.13-1
pipewire 1:1.4.10-1
pipewire-alsa 1:1.4.10-1
pipewire-audio 1:1.4.10-1
pipewire-jack 1:1.4.10-1
pipewire-pulse 1:1.4.10-1
pipewire-x11-bell 1:1.4.10-1
wireplumber 0.5.13-1
wireplumber-docs 0.5.13-1
libpulse 17.0+r98+gb096704c0-1
pulse-native-provider 1:1.4.10-1
pulseaudio-qt 1.7.0-2
vlc-plugin-pulse 3.0.21-32
alsa-card-profiles 1:1.4.10-1
alsa-lib 1.2.15.3-2
alsa-topology-conf 1.2.5.1-4
alsa-ucm-conf 1.2.15.3-1
alsa-utils 1.2.15.2-1
vlc-plugin-alsa 3.0.21-32Offline
Just adding that removing ~/.local/wireplumber/ and restarting wireplumber.service also seems to be unreliable; now I'm finding that it won't get the front headphones to work.
Offline
After doing some more digging, it may be due to the Realtek ALC4082 chipset on my motherboard (ASRock Z790 PG/ITX-TB4), which seems to be causing the ALSA devs headaches: https://github.com/alsa-project/alsa-uc … issues/541
There was an issue specifically for my motherboard, which was closed some time ago: https://github.com/alsa-project/alsa-uc … issues/334
However, I'm also wondering if there may be some other underlying issue, possibly with Intel HD Audio, because of one particular line I consistently get in journalctl:
Jan 27 02:59:44 westerlund kernel: snd_hda_intel 0000:00:1f.3: no codecs found!I read somewhere that the sof-firmware drivers might actually be the ones I need (snd_sof_pci_intel_tgl, see https://superuser.com/questions/1867307 … inkpad-l14 ), but the kernel seems not to use them and I'm not sure how I would switch to the other (or perhaps it's already being used).
00:1f.3 Audio device: Intel Corporation Raptor Lake High Definition Audio Controller (rev 11) (prog-if 00 [HDA compatible])
Subsystem: ASRock Incorporation Device 222a
Flags: bus master, fast devsel, latency 32, IRQ 201
Memory at 445a210000 (64-bit, non-prefetchable) [size=16K]
Memory at 445a100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Intel <unknown>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: snd_hda_intel
Kernel modules: snd_soc_avs, snd_sof_pci_intel_tgl, snd_hda_intelLast edited by brainandforce (2026-01-27 11:08:31)
Offline
After some further testing, I think I have some way of reliably unmuting the headphone jack, but it's weird. I have to switch the current audio stream (usually I just play a video in Firefox) to a hidden device (labeled USB Audio Speakers), cycle the mute state the application stream in pavucontrol, switch back to the front headphone jack, and cycle its mute state. To be honest, I'm not even sure where that device is coming from.
Also, if I try to use aplay to play any sound through the headphone jack (aplay --device surround71:CARD=Audio,DEV=0 -vv /usr/share/sounds/alsa/Front_Center.wav), that ends up muting the headphone jack. Repeating the mute cycle procedure brings back the audio.
When I look in the journal, I also see a lot of error messages from graphical applications that are related to ALSA: https://0x0.st/PNdc.txt
Jan 29 00:03:52 westerlund kded6[1361]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund kded6[1361]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund plasmashell[1376]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund kded6[1361]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund systemsettings[1620]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund systemsettings[1620]: qrc:/kcm/kcm_pulseaudio/DeviceListItem.qml:49: TypeError: Cannot read property 'description' of null
Jan 29 00:03:52 westerlund systemsettings[1620]: 0 instead of 1 arguments to message "Mute %1" supplied before conversion
Jan 29 00:03:52 westerlund systemsettings[1620]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund plasmashell[1376]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund plasmashell[1376]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:52 westerlund systemsettings[1620]: No object for name "alsa_output.usb-Generic_USB_Audio-00.HiFi_7_1__Headphones__sink"
Jan 29 00:03:56 westerlund wireplumber[1134]: wp-event-dispatcher: <WpAsyncEventHook:0x559661b5ea00> failed: failed to activate item: Object activation aborted: proxy destroyed
Jan 29 00:03:58 westerlund wireplumber[1134]: wp-event-dispatcher: <WpAsyncEventHook:0x559661b3da20> failed: <WpSiStandardLink:0x559661ed8d00> link failed: 1 of 1 PipeWire links failed to activate
Jan 29 00:04:05 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0df6249c0 channel:5
Jan 29 00:04:05 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0e08a3090 channel:4
Jan 29 00:04:06 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bd8c780 (slider) reported min width -2, but sizes must be >= 0
Jan 29 00:04:06 westerlund pavucontrol[5782]: GtkGizmo 0x55a63be018b0 (slider) reported min height -2, but sizes must be >= 0
Jan 29 00:04:06 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bebe040 (slider) reported min width -2, but sizes must be >= 0
Jan 29 00:04:06 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bebb300 (slider) reported min height -2, but sizes must be >= 0
Jan 29 00:04:06 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0e08f7450 channel:6
Jan 29 00:04:08 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0e08f7080 channel:2
Jan 29 00:04:09 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0e0c39d00 channel:9
Jan 29 00:04:12 westerlund wireplumber[1134]: wp-event-dispatcher: <WpAsyncEventHook:0x559661b3da20> failed: <WpSiStandardLink:0x559661c4cf80> link failed: 1 of 1 PipeWire links failed to activate
Jan 29 00:04:12 westerlund wireplumber[1134]: wp-event-dispatcher: <WpAsyncEventHook:0x559661b5ea00> failed: failed to activate item: Object activation aborted: proxy destroyed
Jan 29 00:04:14 westerlund wireplumber[1134]: wp-event-dispatcher: <WpAsyncEventHook:0x559661b3da20> failed: <WpSiStandardLink:0x559661ede0f0> link failed: 1 of 1 PipeWire links failed to activate
Jan 29 00:04:18 westerlund NetworkManager[882]: <info> [1769666658.9620] device (wlp0s20f3): set-hw-addr: set MAC address to F6:29:2C:EE:13:93 (scanning)
Jan 29 00:04:18 westerlund NetworkManager[882]: <info> [1769666658.9633] device (wlp0s20f3): supplicant interface state: disconnected -> inactive
Jan 29 00:04:18 westerlund NetworkManager[882]: <info> [1769666658.9634] device (p2p-dev-wlp0s20f3): supplicant management interface state: disconnected -> inactive
Jan 29 00:04:22 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0e15a05a0 channel:8
Jan 29 00:04:27 westerlund pipewire-pulse[1136]: mod.protocol-pulse: [PulseAudio Volume Control] timeout on stream 0x55d0df929040 channel:11
Jan 29 00:04:27 westerlund pavucontrol[5782]: GtkGizmo 0x55a63cc7cc30 (slider) reported min width -2, but sizes must be >= 0
Jan 29 00:04:27 westerlund pavucontrol[5782]: GtkGizmo 0x55a63cf432b0 (slider) reported min height -2, but sizes must be >= 0
Jan 29 00:04:34 westerlund pavucontrol[5782]: GtkGizmo 0x55a63beea120 (slider) reported min width -2, but sizes must be >= 0
Jan 29 00:04:34 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bee7130 (slider) reported min height -2, but sizes must be >= 0
Jan 29 00:04:42 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bed2dc0 (slider) reported min width -2, but sizes must be >= 0
Jan 29 00:04:42 westerlund pavucontrol[5782]: GtkGizmo 0x55a63bece790 (slider) reported min height -2, but sizes must be >= 0I'm starting to wonder if this might have something to do with KDE, but
One last thing: attempting to force the snd_sof_pci_intel_tgl driver over snd_hda_intel caused the module insertion to fail:
Jan 27 06:24:59 westerlund kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
Jan 27 06:24:59 westerlund kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: the DSP is not enabled on this platform, aborting probeso I reverted it back to using snd_hda_intel as it was before. But I do find the error message interesting.
Offline
And after some more fiddling around with the audio, I managed to get this error from Pipewire (I was rapidly toggling mute, which may explain why the same error is showing up multiple times)
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109cca8: Invalid argument
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109cdf8: Invalid argument
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109cf48: Invalid argument
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109d098: Invalid argument
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109d1e8: Invalid argument
Jan 29 00:45:05 westerlund pipewire-pulse[1136]: mod.client-node: port (nil): set_param 4 0x55d0e109d338: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:60998 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:61001 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:61004 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:61007 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:61010 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)
Jan 29 00:45:05 westerlund pipewire[1133]: pw.core: 0x55ae7ae37350: error -22 for resource 65: port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument
Jan 29 00:45:05 westerlund pipewire[1133]: mod.client-node: 0x55ae7bb6f540: error seq:61013 -22 (port_set_param(Spa:Enum:ParamId:Format) failed: Invalid argument)Full journal from this instance: https://0x0.st/PNd6.txt
Offline