You are not logged in.

#1 2026-02-14 13:11:23

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

[SOLVED] System Freezes when switching TTY

Hi ,
For the past few days my system occasionally hard-freezes when switching TTYs (Ctrl+Alt+F1–F6). The screen goes black and the machine becomes completely unresponsive — I have to reset it using the case button.
What could be the cause? (I can’t check the journal because I’ve disabled it)

CPU: Ryzen 5 5600G with integrated GPU.
Kernel: 6.18.9-arch1-2
WM: openbox
DE: No

Random (and possibly useless) output:

$ lspci | grep -i vga
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c9)
$ glxinfo | grep "OpenGL"
OpenGL vendor string: AMD
OpenGL renderer string: AMD Radeon Graphics (radeonsi, renoir, ACO, DRM 3.64, 6.18.9-arch1-2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 25.3.5-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.6 (Compatibility Profile) Mesa 25.3.5-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 25.3.5-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
OpenGL ES profile extensions:
$ dmesg | grep -i -E "amdgpu|drm|error|fail|GPU"
[    0.354623] ACPI: bus type drm_connector registered
[    0.418247] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[    0.418250] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    0.419411] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.436425] RAS: Correctable Errors collector initialized.
[    3.887124] [drm] amdgpu kernel modesetting enabled.
[    3.898908] amdgpu: Virtual CRAT table created for CPU
[    3.898926] amdgpu: Topology: Add CPU node
[    3.899099] amdgpu 0000:04:00.0: amdgpu: initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1002:0x1636 0xC9).
[    3.899114] amdgpu 0000:04:00.0: amdgpu: register mmio base: 0xFCD00000
[    3.899117] amdgpu 0000:04:00.0: amdgpu: register mmio size: 524288
[    3.902318] amdgpu 0000:04:00.0: amdgpu: detected ip block number 0 <common_v2_0_0> (soc15_common)
[    3.902321] amdgpu 0000:04:00.0: amdgpu: detected ip block number 1 <gmc_v9_0_0> (gmc_v9_0)
[    3.902324] amdgpu 0000:04:00.0: amdgpu: detected ip block number 2 <ih_v4_0_0> (vega10_ih)
[    3.902326] amdgpu 0000:04:00.0: amdgpu: detected ip block number 3 <psp_v12_0_0> (psp)
[    3.902328] amdgpu 0000:04:00.0: amdgpu: detected ip block number 4 <smu_v12_0_0> (smu)
[    3.902330] amdgpu 0000:04:00.0: amdgpu: detected ip block number 5 <dce_v1_0_0> (dm)
[    3.902332] amdgpu 0000:04:00.0: amdgpu: detected ip block number 6 <gfx_v9_0_0> (gfx_v9_0)
[    3.902335] amdgpu 0000:04:00.0: amdgpu: detected ip block number 7 <sdma_v4_0_0> (sdma_v4_0)
[    3.902337] amdgpu 0000:04:00.0: amdgpu: detected ip block number 8 <vcn_v2_0_0> (vcn_v2_0)
[    3.902339] amdgpu 0000:04:00.0: amdgpu: detected ip block number 9 <jpeg_v2_0_0> (jpeg_v2_0)
[    3.908112] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR
[    3.908116] amdgpu: ATOM BIOS: 13-CEZANNE-019
[    3.931636] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
[    3.931640] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[    3.931644] amdgpu 0000:04:00.0: amdgpu: MODE2 reset
[    3.932233] amdgpu 0000:04:00.0: amdgpu: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.932239] amdgpu 0000:04:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    3.932242] amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    3.932249] [drm] Detected VRAM RAM=512M, BAR=512M
[    3.932250] [drm] RAM width 128bits DDR4
[    3.932351] amdgpu 0000:04:00.0: amdgpu: amdgpu: 512M of VRAM memory ready
[    3.932354] amdgpu 0000:04:00.0: amdgpu: amdgpu: 3650M of GTT memory ready.
[    3.932371] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.932513] [drm] PCIE GART of 1024M enabled.
[    3.932515] [drm] PTB located at 0x000000F41FC00000
[    3.933008] amdgpu 0000:04:00.0: amdgpu: [drm] Loading DMUB firmware via PSP: version=0x0101002B
[    3.933461] amdgpu 0000:04:00.0: amdgpu: [VCN instance 0] Found VCN firmware Version ENC: 1.24 DEC: 8 VEP: 0 Revision: 9
[    3.934069] amdgpu 0000:04:00.0: amdgpu: reserve 0x400000 from 0xf41f800000 for PSP TMR
[    4.019799] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    4.030928] amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    4.030931] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: optional securedisplay ta ucode is not available
[    4.031401] amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully!
[    4.032610] amdgpu 0000:04:00.0: amdgpu: [drm] Display Core v3.2.351 initialized on DCN 2.1
[    4.032614] amdgpu 0000:04:00.0: amdgpu: [drm] DP-HDMI FRL PCON supported
[    4.033168] amdgpu 0000:04:00.0: amdgpu: [drm] DMUB hardware initialized: version=0x0101002B
[    4.102778] amdgpu 0000:04:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0
[    4.107897] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    4.107906] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[    4.108027] amdgpu: Virtual CRAT table created for GPU
[    4.108476] amdgpu: Topology: Add dGPU node [0x1638:0x1002]
[    4.108479] kfd kfd: amdgpu: added device 1002:1638
[    4.108538] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
[    4.108541] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    4.108544] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    4.108545] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    4.108547] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    4.108549] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    4.108551] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    4.108552] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    4.108554] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    4.108556] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    4.108558] amdgpu 0000:04:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[    4.108559] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
[    4.108561] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
[    4.108563] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
[    4.108565] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
[    4.108567] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
[    4.109589] amdgpu 0000:04:00.0: amdgpu: Runtime PM not available
[    4.109917] amdgpu 0000:04:00.0: [drm] Registered 4 planes with drm panic
[    4.109920] [drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 1
[    4.112832] amdgpu 0000:04:00.0: amdgpu: [drm] Failed to setup vendor infoframe on connector HDMI-A-2: -22
[    4.115563] fbcon: amdgpudrmfb (fb0) is primary device
[    4.115728] [drm] pre_validate_dsc:1667 MST_DSC dsc precompute is not needed
[    4.181593] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    5.066485] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
[    5.102672] vhba: module verification failed: signature and/or required key missing - tainting kernel
[    5.574414] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
$ lsmod | grep amdgpu
amdgpu              15716352  11
amdxcp                 12288  1 amdgpu
i2c_algo_bit           24576  1 amdgpu
drm_ttm_helper         16384  2 amdgpu
ttm                   122880  2 amdgpu,drm_ttm_helper
drm_exec               12288  1 amdgpu
drm_panel_backlight_quirks    12288  1 amdgpu
gpu_sched              69632  1 amdgpu
drm_suballoc_helper    16384  1 amdgpu
video                  81920  1 amdgpu
drm_buddy              28672  1 amdgpu
drm_display_helper    278528  1 amdgpu
cec                    94208  2 drm_display_helper,amdgpu
$ cat /sys/module/amdgpu/parameters/runpm
-1
$ cat /var/log/Xorg.0.log | grep -iEE "(EE|WW)"
[   771.120] Current Operating System: Linux linux 6.3.8-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Wed, 14 Jun 2023 20:10:15 +0000 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   771.120] (==) No Layout section.  Using the first Screen section.
[   771.120] (**) |-->Screen "Screen0" (0)
[   771.120] (==) No monitor specified for screen "Screen0".
[   771.120] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   771.120] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   771.120] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   771.120] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   771.121] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   771.121] (II) xfree86: Adding drm device (/dev/dri/card0)
[   771.122] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   771.123] (WW) Warning, couldn't open module vnc
[   771.123] (EE) Failed to load module "vnc" (module does not exist, 0)
[   771.124] (WW) Warning, couldn't open module fbdev
[   771.124] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   771.125] (EE) AMDGPU(0): [drm] device is not DRM master.
[   771.125] (EE) AMDGPU(1): [drm] device is not DRM master.
[   771.125] (EE) Screen 0 deleted because of no matching config section.
[   771.125] (EE) Screen 0 deleted because of no matching config section.
[   771.125] (II) modeset(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
[   771.188] (II) modeset(0): Year: 2015  Week: 49
[   771.188] (II) modeset(0): redX: 0.652 redY: 0.336   greenX: 0.321 greenY: 0.610
[   771.219] (WW) modeset(0): Option "HotplugDriver" is not used
[   771.219] (WW) modeset(0): Option "TearFree" is not used
[   771.219] (WW) modeset(0): Option "UserPasswdVerifier" is not used
[   771.219] (WW) modeset(0): Option "PasswordFile" is not used
[   771.220] (II) Initializing extension MIT-SCREEN-SAVER
[   771.224] (II) GLX: Initialized DRI2 GL provider for screen 0
[   771.224] (II) Initializing extension XFree86-VidModeExtension
[   771.224] (II) Initializing extension XFree86-DGA
[   771.224] (II) Initializing extension XFree86-DRI
[   771.224] (II) modeset(0): Setting screen physical size to 508 x 285
[   771.294] (II) This device may have been added with another device file.
[   771.297] (II) libinput: Barcode Reader  Consumer Control: needs a virtual subdevice
[   771.298] (II) This device may have been added with another device file.
[   771.298] (II) This device may have been added with another device file.
[   771.298] (II) This device may have been added with another device file.
[   771.298] (II) This device may have been added with another device file.
[   771.299] (II) libinput: SMS IR (Hauppauge WinTV MiniStick): needs a virtual subdevice
[   771.301] (II) This device may have been added with another device file.
[   771.301] (II) This device may have been added with another device file.
[   771.301] (II) This device may have been added with another device file.
[   771.301] (II) This device may have been added with another device file.
[   771.301] (II) This device may have been added with another device file.
[   771.301] (II) This device may have been added with another device file.
[   771.302] (II) This device may have been added with another device file.
[   771.304] (II) This device may have been added with another device file.
$ loginctl show-session $(loginctl | grep $(whoami) | awk '{print $1}') -p Type
Type=tty

Type=unspecified
$ dmesg | tail -n 50
[    5.456293] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.456388] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    5.456528] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.485887] input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-1/5-1.1/5-1.1:1.0/input/input9
[    5.486107] usbcore: registered new interface driver xpad
[    5.488877] ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.491345] ee1004 4-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    5.505746] r8169 0000:03:00.0 eth0: RTL8168h/8111h, a8:a1:59:ef:d6:59, XID 541, IRQ 60
[    5.505753] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.556606] kvm_amd: TSC scaling supported
[    5.556610] kvm_amd: Nested Virtualization enabled
[    5.556612] kvm_amd: Nested Paging enabled
[    5.556613] kvm_amd: LBR virtualization supported
[    5.556616] kvm_amd: Virtual VMLOAD VMSAVE supported
[    5.556617] kvm_amd: Virtual GIF supported
[    5.561803] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[    5.574414] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.575404] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input10
[    5.575492] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input11
[    5.575574] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input12
[    5.575650] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input13
[    5.604096] snd_hda_codec_alc662 hdaudioC1D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.604103] snd_hda_codec_alc662 hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.604106] snd_hda_codec_alc662 hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.604108] snd_hda_codec_alc662 hdaudioC1D0:    mono: mono_out=0x0
[    5.604109] snd_hda_codec_alc662 hdaudioC1D0:    inputs:
[    5.604112] snd_hda_codec_alc662 hdaudioC1D0:      Rear Mic=0x18
[    5.604114] snd_hda_codec_alc662 hdaudioC1D0:      Front Mic=0x19
[    5.604117] snd_hda_codec_alc662 hdaudioC1D0:      Line=0x1a
[    5.612331] intel_rapl_common: Found RAPL domain package
[    5.612335] intel_rapl_common: Found RAPL domain core
[    5.612630] amd_atl: AMD Address Translation Library initialized
[    5.622703] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input14
[    5.622770] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input15
[    5.622828] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input16
[    5.622887] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input17
[    5.622944] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input18
[    6.096217] EXT4-fs (sda2): recovery complete
[    6.096265] EXT4-fs (sda2): mounted filesystem 016650e9-4abc-4b37-89e4-6daeec3d40b3 r/w with ordered data mode. Quota mode: none.
[    6.313484] nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
[    6.324291] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[    6.482409] r8169 0000:03:00.0 eth0: Link is Down
[    8.036054] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[  155.226622] sysrq: This sysrq operation is disabled.
[  155.490616] sysrq: This sysrq operation is disabled.
[  155.658609] sysrq: This sysrq operation is disabled.
[  155.802607] sysrq: Emergency Sync
[  155.805986] Emergency Sync complete
[  155.954617] sysrq: This sysrq operation is disabled.
[  156.530615] sysrq: This sysrq operation is disabled.
$ cat /etc/default/grub
# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="video=1920x1080@60"
#GRUB_CMDLINE_LINUX_DEFAULT="video=HDMI-A-1:1920x1080@60e"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1920x1080x16
#GRUB_GFXMODE=640x480
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"
GRUB_DISABLE_OS_PROBER=false
$ cat /proc/interrupts | grep amdgpu
  57:     188356          0          0          0          0          0          0          0          0          0          0          0 PCI-MSIX-0000:04:00.0    0-edge      amdgpu
$ cat ~/.xinitrc
#eject -x 4 /dev/sr0 &
#export GTK_IM_MODULE='uim'
#export QT_IM_MODULE='uim'
#uim-xim &
#export XMODIFIERS='@im=uim'
#
#export GTK_IM_MODULE='ibus'
#export QT_IM_MODULE='ibus'
#export XMODIFIERS='@im=ibus'
#ibus-daemon -dr
#
#export XMODIFIERS=@im=SCIM
#export GTK_IM_MODULE="scim"
#export QT_IM_MODULE="scim"
#scim -d
#
GTK_IM_MODULE=fcitx5
QT_IM_MODULE=fcitx5
XMODIFIERS=@im=fcitx5
SDL_IM_MODULE=fcitx5
fcitx5 -d --ui none &
#fcitx5-no-tray &
#
#export XMODIFIERS=@im=SCIM
#export GTK_IM_MODULE="scim"
#export QT_IM_MODULE="scim"
#scim -d
#
#export GTK_IM_MODULE=nimf
#export QT4_IM_MODULE="nimf"
#export QT_IM_MODULE=nimf
#export XMODIFIERS="@im=nimf"
#nimf &
#startlxde
#redshift -l 41:12 &
#redshift -o &
blugon &
openbox-session

Last edited by quellen (2026-02-17 09:26:31)


sorry for my bad english

Offline

#2 2026-02-14 15:25:53

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

https://bbs.archlinux.org/viewtopic.php … 7#p2284547
Any new hardware?
Did your xbox controller break around the same time?

Offline

#3 2026-02-15 10:28:22

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

https://bbs.archlinux.org/viewtopic.php … 7#p2284547
Any new hardware?
Did your xbox controller break around the same time?

No new hardware; the issue first appeared the day before yesterday. The joypad problem, however, has been occurring for several weeks.
I also tried installing linux-lts, but it didn't solve it.

Anyway, until recently, I would see this EDID error whenever I switched TTYs, but the system wouldn't crash:

Arch Linux 6.10.3-arch1-1 (tty4)

linux login: [ 1087.872039] [drm:dm_helpers_read_local_edid [amdgpu]] *ERROR* EDID err: 2, on connector: HDMI-A-2
[ 1087.872393] amdgpu 0000:04:00.0: [drm] *ERROR* No EDID read.

photo: https://i.postimg.cc/mgbYKLdP/a12bd249- … 39a1c7.jpg

$ xrandr 
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
HDMI-A-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-A-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 296mm
   1920x1080     60.00*+  50.00    50.00    59.94  
   1680x1050     59.88  
   1600x900      60.00  
   1280x1024     60.02  
   1440x900      59.90  
   1280x800      59.91  
   1280x720      60.00    50.00    59.94  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       60.00    59.94  
DisplayPort-0 disconnected (normal left inverted right x axis y axis)

I've already attempted to force a custom EDID via GRUB (drm.edid_firmware=HDMI-A-2:edid/my_monitor_edid.bin), but it didn't solve the problem.
System info: https://linux-hardware.org/?probe=0cbd0d68c2

Last edited by quellen (2026-02-15 10:52:22)


sorry for my bad english

Offline

#4 2026-02-15 12:42:28

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

I re-enabled the journal:

$ sudo journalctl -b -p err..emerg
feb 15 13:39:52 linux systemd-modules-load[357]: Failed to find module 'vhba'
feb 15 13:39:52 linux systemd-udevd[376]: /etc/udev/rules.d/99-usb-audio-volume.rules:1 Invalid value "/bin/sh -c 'sleep 1 && /usr/bin/amixer -c Device sset Speaker 100%'" for RUN (char 66: invalid substitution type), ignoring.
feb 15 13:39:52 linux kernel: rc_core: IR keymap rc-hauppauge not found
feb 15 13:39:55 linux systemd[1]: Failed to start making network connection up.
feb 15 13:39:56 linux ntpd[605]: unable to bind to wildcard address :: - another process may be running - EXITING
feb 15 13:39:56 linux ntpd[603]: daemon child exited with code 1
feb 15 13:39:59 linux systemd[673]: Failed to start Blue Light Filter.
feb 15 13:39:59 linux dbus-broker-launch[792]: Ignoring duplicate name 'org.freedesktop.Notifications' in service file '/usr/share/dbus-1/services/fr.emersion.mako.service'
feb 15 13:39:59 linux dbus-broker-launch[792]: Ignoring duplicate name 'org.freedesktop.Notifications' in service file '/usr/share/dbus-1/services/org.freedesktop.Notifications.service'
feb 15 13:39:59 linux dbus-broker-launch[792]: Ignoring duplicate name 'org.freedesktop.Notifications' in service file '/usr/share/dbus-1/services/org.freedesktop.mate.Notifications.service'
feb 15 13:39:59 linux dbus-broker-launch[792]: Ignoring duplicate name 'org.freedesktop.Notifications' in service file '/usr/share/dbus-1/services/org.knopwob.dunst.service'
feb 15 13:39:59 linux dbus-broker-launch[792]: Ignoring duplicate name 'org.freedesktop.Notifications' in service file '/usr/share/dbus-1/services/org.xfce.xfce4-notifyd.Notifications.service'
feb 15 13:39:59 linux polkitd[830]: Error compiling script /etc/polkit-1/rules.d/49-udisks2-ntfs.rules: SyntaxError: invalid token (line 1)
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
feb 15 13:39:59 linux systemd[673]: Failed to start Portal service (GTK/GNOME implementation).
sudo journalctl -k -b 
feb 15 13:39:52 linux kernel: Linux version 6.12.71-1-lts (linux-lts@archlinux) (gcc (GCC) 15.2.1 20260209, GNU ld (GNU Binutils) 2.46) #1 SMP PREEMPT_DYNAMIC Fri, 13 Feb 2026 19:12:56 +0000
feb 15 13:39:52 linux kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=6873b23b-fe1f-4788-9932-092a6207270e rw
feb 15 13:39:52 linux kernel: BIOS-provided physical RAM map:
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000a20f000-0x000000000affffff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000000b020000-0x0000000098db6fff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x0000000098db7000-0x000000009a4f7fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000009a4f8000-0x000000009a542fff] ACPI data
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000009a543000-0x000000009bff5fff] ACPI NVS
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000009bff6000-0x000000009cdfefff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000009cdff000-0x000000009dffffff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000009e000000-0x00000000bfffffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x0000000100000000-0x000000023e2fffff] usable
feb 15 13:39:52 linux kernel: BIOS-e820: [mem 0x000000023e300000-0x000000023fffffff] reserved
feb 15 13:39:52 linux kernel: NX (Execute Disable) protection: active
feb 15 13:39:52 linux kernel: APIC: Static calls initialized
feb 15 13:39:52 linux kernel: SMBIOS 3.3.0 present.
feb 15 13:39:52 linux kernel: DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A520M-HVS, BIOS P2.10 02/24/2022
feb 15 13:39:52 linux kernel: DMI: Memory slots populated: 2/2
feb 15 13:39:52 linux kernel: tsc: Fast TSC calibration using PIT
feb 15 13:39:52 linux kernel: tsc: Detected 3892.676 MHz processor
feb 15 13:39:52 linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
feb 15 13:39:52 linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
feb 15 13:39:52 linux kernel: last_pfn = 0x23e300 max_arch_pfn = 0x400000000
feb 15 13:39:52 linux kernel: MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
feb 15 13:39:52 linux kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
feb 15 13:39:52 linux kernel: e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
feb 15 13:39:52 linux kernel: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
feb 15 13:39:52 linux kernel: Using GB pages for direct mapping
feb 15 13:39:52 linux kernel: RAMDISK: [mem 0x335c1000-0x35ad7fff]
feb 15 13:39:52 linux kernel: ACPI: Early table checksum verification disabled
feb 15 13:39:52 linux kernel: ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
feb 15 13:39:52 linux kernel: ACPI: XSDT 0x000000009BFDE728 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
feb 15 13:39:52 linux kernel: ACPI: FACP 0x000000009A535000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
feb 15 13:39:52 linux kernel: ACPI: DSDT 0x000000009A515000 0063C3 (v02 ALASKA A M I    01072009 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: FACS 0x000000009AFD9000 000040
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A53B000 0072B0 (v02 AMD    Artic    00000002 MSFT 04000000)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A537000 003ACF (v01 AMD    AMD AOD  00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A536000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
feb 15 13:39:52 linux kernel: ACPI: FIDT 0x000000009A52E000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
feb 15 13:39:52 linux kernel: ACPI: MCFG 0x000000009A52D000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
feb 15 13:39:52 linux kernel: ACPI: AAFT 0x000000009A52C000 0000ED (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
feb 15 13:39:52 linux kernel: ACPI: HPET 0x000000009A52B000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A527000 002844 (v02 AMD    AmdTable 00000001 AMD  00000001)
feb 15 13:39:52 linux kernel: ACPI: CRAT 0x000000009A526000 000B68 (v01 AMD    AmdTable 00000001 AMD  00000001)
feb 15 13:39:52 linux kernel: ACPI: CDIT 0x000000009A525000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A524000 000D53 (v01 AMD    ArticIG2 00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A522000 0010AC (v01 AMD    ArticTPX 00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A51E000 003798 (v01 AMD    ArticN   00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: WSMT 0x000000009A51D000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
feb 15 13:39:52 linux kernel: ACPI: APIC 0x000000009A51C000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A534000 000497 (v01 AMD    ArticPRN 00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A533000 00007D (v01 AMD    ArticDIS 00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A531000 0010AF (v01 AMD    ArticC   00000001 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: SSDT 0x000000009A530000 0000BF (v01 AMD    AmdTable 00001000 INTL 20120913)
feb 15 13:39:52 linux kernel: ACPI: FPDT 0x000000009A52F000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
feb 15 13:39:52 linux kernel: ACPI: Reserving FACP table memory at [mem 0x9a535000-0x9a535113]
feb 15 13:39:52 linux kernel: ACPI: Reserving DSDT table memory at [mem 0x9a515000-0x9a51b3c2]
feb 15 13:39:52 linux kernel: ACPI: Reserving FACS table memory at [mem 0x9afd9000-0x9afd903f]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a53b000-0x9a5422af]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a537000-0x9a53aace]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a536000-0x9a5361ac]
feb 15 13:39:52 linux kernel: ACPI: Reserving FIDT table memory at [mem 0x9a52e000-0x9a52e09b]
feb 15 13:39:52 linux kernel: ACPI: Reserving MCFG table memory at [mem 0x9a52d000-0x9a52d03b]
feb 15 13:39:52 linux kernel: ACPI: Reserving AAFT table memory at [mem 0x9a52c000-0x9a52c0ec]
feb 15 13:39:52 linux kernel: ACPI: Reserving HPET table memory at [mem 0x9a52b000-0x9a52b037]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a527000-0x9a529843]
feb 15 13:39:52 linux kernel: ACPI: Reserving CRAT table memory at [mem 0x9a526000-0x9a526b67]
feb 15 13:39:52 linux kernel: ACPI: Reserving CDIT table memory at [mem 0x9a525000-0x9a525028]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a524000-0x9a524d52]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a522000-0x9a5230ab]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a51e000-0x9a521797]
feb 15 13:39:52 linux kernel: ACPI: Reserving WSMT table memory at [mem 0x9a51d000-0x9a51d027]
feb 15 13:39:52 linux kernel: ACPI: Reserving APIC table memory at [mem 0x9a51c000-0x9a51c15d]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a534000-0x9a534496]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a533000-0x9a53307c]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a531000-0x9a5320ae]
feb 15 13:39:52 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a530000-0x9a5300be]
feb 15 13:39:52 linux kernel: ACPI: Reserving FPDT table memory at [mem 0x9a52f000-0x9a52f043]
feb 15 13:39:52 linux kernel: No NUMA configuration found
feb 15 13:39:52 linux kernel: Faking a node at [mem 0x0000000000000000-0x000000023e2fffff]
feb 15 13:39:52 linux kernel: NODE_DATA(0) allocated [mem 0x23e2d52c0-0x23e2fffff]
feb 15 13:39:52 linux kernel: Zone ranges:
feb 15 13:39:52 linux kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
feb 15 13:39:52 linux kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
feb 15 13:39:52 linux kernel:   Normal   [mem 0x0000000100000000-0x000000023e2fffff]
feb 15 13:39:52 linux kernel:   Device   empty
feb 15 13:39:52 linux kernel: Movable zone start for each node
feb 15 13:39:52 linux kernel: Early memory node ranges
feb 15 13:39:52 linux kernel:   node   0: [mem 0x0000000000001000-0x000000000009cfff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x0000000000100000-0x0000000009bfefff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x000000000a20f000-0x000000000affffff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x000000000b020000-0x0000000098db6fff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x000000009cdff000-0x000000009dffffff]
feb 15 13:39:52 linux kernel:   node   0: [mem 0x0000000100000000-0x000000023e2fffff]
feb 15 13:39:52 linux kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000023e2fffff]
feb 15 13:39:52 linux kernel: On node 0, zone DMA: 1 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone DMA: 99 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone DMA32: 1025 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone DMA32: 15 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone DMA32: 32 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone DMA32: 16456 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone Normal: 8192 pages in unavailable ranges
feb 15 13:39:52 linux kernel: On node 0, zone Normal: 7424 pages in unavailable ranges
feb 15 13:39:52 linux kernel: ACPI: PM-Timer IO Port: 0x808
feb 15 13:39:52 linux kernel: CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
feb 15 13:39:52 linux kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
feb 15 13:39:52 linux kernel: IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
feb 15 13:39:52 linux kernel: IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
feb 15 13:39:52 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
feb 15 13:39:52 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
feb 15 13:39:52 linux kernel: ACPI: Using ACPI (MADT) for SMP configuration information
feb 15 13:39:52 linux kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
feb 15 13:39:52 linux kernel: CPU topo: Max. logical packages:   1
feb 15 13:39:52 linux kernel: CPU topo: Max. logical dies:       1
feb 15 13:39:52 linux kernel: CPU topo: Max. dies per package:   1
feb 15 13:39:52 linux kernel: CPU topo: Max. threads per core:   2
feb 15 13:39:52 linux kernel: CPU topo: Num. cores per package:     6
feb 15 13:39:52 linux kernel: CPU topo: Num. threads per package:  12
feb 15 13:39:52 linux kernel: CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs
feb 15 13:39:52 linux kernel: CPU topo: Rejected CPUs 20
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x000fffff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x98db7000-0x9cdfefff]
feb 15 13:39:52 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x9e000000-0xffffffff]
feb 15 13:39:52 linux kernel: [mem 0xc0000000-0xefffffff] available for PCI devices
feb 15 13:39:52 linux kernel: Booting paravirtualized kernel on bare hardware
feb 15 13:39:52 linux kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
feb 15 13:39:52 linux kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
feb 15 13:39:52 linux kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
feb 15 13:39:52 linux kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
feb 15 13:39:52 linux kernel: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
feb 15 13:39:52 linux kernel: pcpu-alloc: [0] 08 09 10 11 
feb 15 13:39:52 linux kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=6873b23b-fe1f-4788-9932-092a6207270e rw
feb 15 13:39:52 linux kernel: random: crng init done
feb 15 13:39:52 linux kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
feb 15 13:39:52 linux kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
feb 15 13:39:52 linux kernel: Fallback order for Node 0: 0 
feb 15 13:39:52 linux kernel: Built 1 zonelists, mobility grouping on.  Total pages: 1932836
feb 15 13:39:52 linux kernel: Policy zone: Normal
feb 15 13:39:52 linux kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
feb 15 13:39:52 linux kernel: software IO TLB: area num 16.
feb 15 13:39:52 linux kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
feb 15 13:39:52 linux kernel: ftrace: allocating 51508 entries in 202 pages
feb 15 13:39:52 linux kernel: ftrace: allocated 202 pages with 4 groups
feb 15 13:39:52 linux kernel: Dynamic Preempt: voluntary
feb 15 13:39:52 linux kernel: rcu: Preemptible hierarchical RCU implementation.
feb 15 13:39:52 linux kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
feb 15 13:39:52 linux kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
feb 15 13:39:52 linux kernel:         Trampoline variant of Tasks RCU enabled.
feb 15 13:39:52 linux kernel:         Rude variant of Tasks RCU enabled.
feb 15 13:39:52 linux kernel:         Tracing variant of Tasks RCU enabled.
feb 15 13:39:52 linux kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
feb 15 13:39:52 linux kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
feb 15 13:39:52 linux kernel: RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 13:39:52 linux kernel: RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 13:39:52 linux kernel: RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 13:39:52 linux kernel: NR_IRQS: 524544, nr_irqs: 1064, preallocated irqs: 16
feb 15 13:39:52 linux kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
feb 15 13:39:52 linux kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
feb 15 13:39:52 linux kernel: spurious 8259A interrupt: IRQ7.
feb 15 13:39:52 linux kernel: Console: colour dummy device 80x25
feb 15 13:39:52 linux kernel: printk: legacy console [tty0] enabled
feb 15 13:39:52 linux kernel: ACPI: Core revision 20240827
feb 15 13:39:52 linux kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
feb 15 13:39:52 linux kernel: APIC: Switch to symmetric I/O mode setup
feb 15 13:39:52 linux kernel: x2apic: IRQ remapping doesn't support X2APIC mode
feb 15 13:39:52 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
feb 15 13:39:52 linux kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7038a97c032, max_idle_ns: 881591166209 ns
feb 15 13:39:52 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7788.74 BogoMIPS (lpj=12975586)
feb 15 13:39:52 linux kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
feb 15 13:39:52 linux kernel: LVT offset 1 assigned for vector 0xf9
feb 15 13:39:52 linux kernel: LVT offset 2 assigned for vector 0xf4
feb 15 13:39:52 linux kernel: Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
feb 15 13:39:52 linux kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
feb 15 13:39:52 linux kernel: process: using mwait in idle threads
feb 15 13:39:52 linux kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
feb 15 13:39:52 linux kernel: Spectre V2 : Mitigation: Retpolines
feb 15 13:39:52 linux kernel: Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
feb 15 13:39:52 linux kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
feb 15 13:39:52 linux kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
feb 15 13:39:52 linux kernel: Spectre V2 : User space: Mitigation: STIBP always-on protection
feb 15 13:39:52 linux kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
feb 15 13:39:52 linux kernel: active return thunk: srso_alias_return_thunk
feb 15 13:39:52 linux kernel: Speculative Return Stack Overflow: Mitigation: Safe RET
feb 15 13:39:52 linux kernel: Transient Scheduler Attacks: Mitigation: Clear CPU buffers
feb 15 13:39:52 linux kernel: VMSCAPE: Mitigation: IBPB before exit to userspace
feb 15 13:39:52 linux kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
feb 15 13:39:52 linux kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
feb 15 13:39:52 linux kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
feb 15 13:39:52 linux kernel: x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
feb 15 13:39:52 linux kernel: x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
feb 15 13:39:52 linux kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
feb 15 13:39:52 linux kernel: x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
feb 15 13:39:52 linux kernel: x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
feb 15 13:39:52 linux kernel: x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
feb 15 13:39:52 linux kernel: Freeing SMP alternatives memory: 44K
feb 15 13:39:52 linux kernel: pid_max: default: 32768 minimum: 301
feb 15 13:39:52 linux kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
feb 15 13:39:52 linux kernel: landlock: Up and running.
feb 15 13:39:52 linux kernel: Yama: becoming mindful.
feb 15 13:39:52 linux kernel: LSM support for eBPF active
feb 15 13:39:52 linux kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
feb 15 13:39:52 linux kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
feb 15 13:39:52 linux kernel: smpboot: CPU0: AMD Ryzen 5 5600G with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
feb 15 13:39:52 linux kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver.
feb 15 13:39:52 linux kernel: ... version:                0
feb 15 13:39:52 linux kernel: ... bit width:              48
feb 15 13:39:52 linux kernel: ... generic registers:      6
feb 15 13:39:52 linux kernel: ... value mask:             0000ffffffffffff
feb 15 13:39:52 linux kernel: ... max period:             00007fffffffffff
feb 15 13:39:52 linux kernel: ... fixed-purpose events:   0
feb 15 13:39:52 linux kernel: ... event mask:             000000000000003f
feb 15 13:39:52 linux kernel: signal: max sigframe size: 3376
feb 15 13:39:52 linux kernel: rcu: Hierarchical SRCU implementation.
feb 15 13:39:52 linux kernel: rcu:         Max phase no-delay instances is 1000.
feb 15 13:39:52 linux kernel: Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
feb 15 13:39:52 linux kernel: MCE: In-kernel MCE decoding enabled.
feb 15 13:39:52 linux kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
feb 15 13:39:52 linux kernel: smp: Bringing up secondary CPUs ...
feb 15 13:39:52 linux kernel: smpboot: x86: Booting SMP configuration:
feb 15 13:39:52 linux kernel: .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
feb 15 13:39:52 linux kernel: Spectre V2 : Update user space SMT mitigation: STIBP always-on
feb 15 13:39:52 linux kernel: smp: Brought up 1 node, 12 CPUs
feb 15 13:39:52 linux kernel: smpboot: Total of 12 processors activated (93461.89 BogoMIPS)
feb 15 13:39:52 linux kernel: Memory: 7420068K/7731344K available (18432K kernel code, 2684K rwdata, 14352K rodata, 4296K init, 4240K bss, 297188K reserved, 0K cma-reserved)
feb 15 13:39:52 linux kernel: devtmpfs: initialized
feb 15 13:39:52 linux kernel: x86/mm: Memory block size: 128MB
feb 15 13:39:52 linux kernel: ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes)
feb 15 13:39:52 linux kernel: ACPI: PM: Registering ACPI NVS region [mem 0x9a543000-0x9bff5fff] (27996160 bytes)
feb 15 13:39:52 linux kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
feb 15 13:39:52 linux kernel: futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
feb 15 13:39:52 linux kernel: pinctrl core: initialized pinctrl subsystem
feb 15 13:39:52 linux kernel: PM: RTC time: 12:39:46, date: 2026-02-15
feb 15 13:39:52 linux kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
feb 15 13:39:52 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
feb 15 13:39:52 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
feb 15 13:39:52 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
feb 15 13:39:52 linux kernel: audit: initializing netlink subsys (disabled)
feb 15 13:39:52 linux kernel: audit: type=2000 audit(1771159185.000:1): state=initialized audit_enabled=0 res=1
feb 15 13:39:52 linux kernel: thermal_sys: Registered thermal governor 'fair_share'
feb 15 13:39:52 linux kernel: thermal_sys: Registered thermal governor 'bang_bang'
feb 15 13:39:52 linux kernel: thermal_sys: Registered thermal governor 'step_wise'
feb 15 13:39:52 linux kernel: thermal_sys: Registered thermal governor 'user_space'
feb 15 13:39:52 linux kernel: thermal_sys: Registered thermal governor 'power_allocator'
feb 15 13:39:52 linux kernel: cpuidle: using governor ladder
feb 15 13:39:52 linux kernel: cpuidle: using governor menu
feb 15 13:39:52 linux kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
feb 15 13:39:52 linux kernel: PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
feb 15 13:39:52 linux kernel: PCI: Using configuration type 1 for base access
feb 15 13:39:52 linux kernel: mtrr: your CPUs had inconsistent variable MTRR settings
feb 15 13:39:52 linux kernel: mtrr: probably your BIOS does not setup all CPUs.
feb 15 13:39:52 linux kernel: mtrr: corrected configuration.
feb 15 13:39:52 linux kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
feb 15 13:39:52 linux kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
feb 15 13:39:52 linux kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
feb 15 13:39:52 linux kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
feb 15 13:39:52 linux kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
feb 15 13:39:52 linux kernel: ACPI: Added _OSI(Module Device)
feb 15 13:39:52 linux kernel: ACPI: Added _OSI(Processor Device)
feb 15 13:39:52 linux kernel: ACPI: Added _OSI(Processor Aggregator Device)
feb 15 13:39:52 linux kernel: ACPI: 12 ACPI AML tables successfully acquired and loaded
feb 15 13:39:52 linux kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
feb 15 13:39:52 linux kernel: ACPI: Interpreter enabled
feb 15 13:39:52 linux kernel: ACPI: PM: (supports S0 S3 S4 S5)
feb 15 13:39:52 linux kernel: ACPI: Using IOAPIC for interrupt routing
feb 15 13:39:52 linux kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
feb 15 13:39:52 linux kernel: PCI: Using E820 reservations for host bridge windows
feb 15 13:39:52 linux kernel: ACPI: Enabled 7 GPEs in block 00 to 1F
feb 15 13:39:52 linux kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
feb 15 13:39:52 linux kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
feb 15 13:39:52 linux kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
feb 15 13:39:52 linux kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
feb 15 13:39:52 linux kernel: acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
feb 15 13:39:52 linux kernel: PCI host bridge to bus 0000:00
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
feb 15 13:39:52 linux kernel: pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1:   bridge window [mem 0xfce00000-0xfcffffff]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xfca00000-0xfcdfffff]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
feb 15 13:39:52 linux kernel: pci 0000:01:00.0: [1022:43ec] type 00 class 0x0c0330 PCIe Legacy Endpoint
feb 15 13:39:52 linux kernel: pci 0000:01:00.0: BAR 0 [mem 0xfcfa0000-0xfcfa7fff 64bit]
feb 15 13:39:52 linux kernel: pci 0000:01:00.0: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:01:00.0: PME# supported from D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
feb 15 13:39:52 linux kernel: pci 0000:01:00.1: BAR 5 [mem 0xfcf80000-0xfcf9ffff]
feb 15 13:39:52 linux kernel: pci 0000:01:00.1: ROM [mem 0xfcf00000-0xfcf7ffff pref]
feb 15 13:39:52 linux kernel: pci 0000:01:00.1: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:01:00.1: PME# supported from D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: PME# supported from D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: PME# supported from D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: BAR 2 [mem 0xfce04000-0xfce04fff 64bit]
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: BAR 4 [mem 0xfce00000-0xfce03fff 64bit]
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: supports D1 D2
feb 15 13:39:52 linux kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: [1002:1638] type 00 class 0x030000 PCIe Legacy Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: BAR 2 [mem 0xe0000000-0xe01fffff 64bit pref]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: BAR 4 [io  0xe000-0xe0ff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: BAR 5 [mem 0xfcd00000-0xfcd7ffff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:04:00.1: [1002:1637] type 00 class 0x040300 PCIe Legacy Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.1: BAR 0 [mem 0xfcd88000-0xfcd8bfff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.1: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:04:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.2: BAR 2 [mem 0xfcc00000-0xfccfffff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.2: BAR 5 [mem 0xfcd8c000-0xfcd8dfff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.2: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.3: BAR 0 [mem 0xfcb00000-0xfcbfffff 64bit]
feb 15 13:39:52 linux kernel: pci 0000:04:00.3: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:04:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.4: BAR 0 [mem 0xfca00000-0xfcafffff 64bit]
feb 15 13:39:52 linux kernel: pci 0000:04:00.4: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.4: PME# supported from D0 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
feb 15 13:39:52 linux kernel: pci 0000:04:00.6: BAR 0 [mem 0xfcd80000-0xfcd87fff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.6: enabling Extended Tags
feb 15 13:39:52 linux kernel: pci 0000:04:00.6: PME# supported from D0 D3hot D3cold
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 0
feb 15 13:39:52 linux kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0
feb 15 13:39:52 linux kernel: iommu: Default domain type: Translated
feb 15 13:39:52 linux kernel: iommu: DMA domain TLB invalidation policy: lazy mode
feb 15 13:39:52 linux kernel: SCSI subsystem initialized
feb 15 13:39:52 linux kernel: libata version 3.00 loaded.
feb 15 13:39:52 linux kernel: ACPI: bus type USB registered
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver usbfs
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver hub
feb 15 13:39:52 linux kernel: usbcore: registered new device driver usb
feb 15 13:39:52 linux kernel: EDAC MC: Ver: 3.0.0
feb 15 13:39:52 linux kernel: NetLabel: Initializing
feb 15 13:39:52 linux kernel: NetLabel:  domain hash size = 128
feb 15 13:39:52 linux kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
feb 15 13:39:52 linux kernel: NetLabel:  unlabeled traffic allowed by default
feb 15 13:39:52 linux kernel: mctp: management component transport protocol core
feb 15 13:39:52 linux kernel: NET: Registered PF_MCTP protocol family
feb 15 13:39:52 linux kernel: PCI: Using ACPI for IRQ routing
feb 15 13:39:52 linux kernel: PCI: pci_cache_line_size set to 64 bytes
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x98db7000-0x9bffffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
feb 15 13:39:52 linux kernel: e820: reserve RAM buffer [mem 0x23e300000-0x23fffffff]
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: vgaarb: setting as boot VGA device
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: vgaarb: bridge control possible
feb 15 13:39:52 linux kernel: pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
feb 15 13:39:52 linux kernel: vgaarb: loaded
feb 15 13:39:52 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
feb 15 13:39:52 linux kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
feb 15 13:39:52 linux kernel: clocksource: Switched to clocksource tsc-early
feb 15 13:39:52 linux kernel: VFS: Disk quotas dquot_6.6.0
feb 15 13:39:52 linux kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
feb 15 13:39:52 linux kernel: pnp: PnP ACPI init
feb 15 13:39:52 linux kernel: system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
feb 15 13:39:52 linux kernel: system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
feb 15 13:39:52 linux kernel: system 00:02: [mem 0xa0000000-0xbfffffff window] has been reserved
feb 15 13:39:52 linux kernel: system 00:04: [io  0x0280-0x028f] has been reserved
feb 15 13:39:52 linux kernel: system 00:04: [io  0x0290-0x029f] has been reserved
feb 15 13:39:52 linux kernel: system 00:04: [io  0x02a0-0x02af] has been reserved
feb 15 13:39:52 linux kernel: system 00:04: [io  0x02b0-0x02bf] has been reserved
feb 15 13:39:52 linux kernel: pnp 00:05: [dma 0 disabled]
feb 15 13:39:52 linux kernel: system 00:07: [io  0x04d0-0x04d1] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x040b] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x04d6] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c00-0x0c01] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c14] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c50-0x0c51] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c52] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c6c] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0c6f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0cd8-0x0cdf] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0800-0x089f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0b00-0x0b0f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0b20-0x0b3f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0900-0x090f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [io  0x0910-0x091f] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfec01000-0xfec01fff] could not be reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfedc0000-0xfedc0fff] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfed80000-0xfed8ffff] could not be reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
feb 15 13:39:52 linux kernel: system 00:07: [mem 0xff000000-0xffffffff] has been reserved
feb 15 13:39:52 linux kernel: pnp: PnP ACPI: found 8 devices
feb 15 13:39:52 linux kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
feb 15 13:39:52 linux kernel: NET: Registered PF_INET protocol family
feb 15 13:39:52 linux kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
feb 15 13:39:52 linux kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
feb 15 13:39:52 linux kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
feb 15 13:39:52 linux kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
feb 15 13:39:52 linux kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
feb 15 13:39:52 linux kernel: TCP: Hash tables configured (established 65536 bind 65536)
feb 15 13:39:52 linux kernel: MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
feb 15 13:39:52 linux kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
feb 15 13:39:52 linux kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
feb 15 13:39:52 linux kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
feb 15 13:39:52 linux kernel: NET: Registered PF_XDP protocol family
feb 15 13:39:52 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:02:03.0:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:01:00.2:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1:   bridge window [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci 0000:00:02.1:   bridge window [mem 0xfce00000-0xfcffffff]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xfca00000-0xfcdfffff]
feb 15 13:39:52 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
feb 15 13:39:52 linux kernel: pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcffffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:02: resource 1 [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
feb 15 13:39:52 linux kernel: pci_bus 0000:04: resource 1 [mem 0xfca00000-0xfcdfffff]
feb 15 13:39:52 linux kernel: pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 13:39:52 linux kernel: pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
feb 15 13:39:52 linux kernel: pci 0000:04:00.3: extending delay after power-on from D3hot to 20 msec
feb 15 13:39:52 linux kernel: pci 0000:04:00.4: extending delay after power-on from D3hot to 20 msec
feb 15 13:39:52 linux kernel: PCI: CLS 64 bytes, default 64
feb 15 13:39:52 linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
feb 15 13:39:52 linux kernel: software IO TLB: mapped [mem 0x0000000094db7000-0x0000000098db7000] (64MB)
feb 15 13:39:52 linux kernel: LVT offset 0 assigned for vector 0x400
feb 15 13:39:52 linux kernel: Trying to unpack rootfs image as initramfs...
feb 15 13:39:52 linux kernel: perf: AMD IBS detected (0x000003ff)
feb 15 13:39:52 linux kernel: Initialise system trusted keyrings
feb 15 13:39:52 linux kernel: Key type blacklist registered
feb 15 13:39:52 linux kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
feb 15 13:39:52 linux kernel: fuse: init (API version 7.41)
feb 15 13:39:52 linux kernel: integrity: Platform Keyring initialized
feb 15 13:39:52 linux kernel: integrity: Machine keyring initialized
feb 15 13:39:52 linux kernel: Key type asymmetric registered
feb 15 13:39:52 linux kernel: Asymmetric key parser 'x509' registered
feb 15 13:39:52 linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
feb 15 13:39:52 linux kernel: io scheduler mq-deadline registered
feb 15 13:39:52 linux kernel: io scheduler kyber registered
feb 15 13:39:52 linux kernel: io scheduler bfq registered
feb 15 13:39:52 linux kernel: ledtrig-cpu: registered to indicate activity on CPUs
feb 15 13:39:52 linux kernel: pcieport 0000:00:02.1: PME: Signaling with IRQ 25
feb 15 13:39:52 linux kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 26
feb 15 13:39:52 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
feb 15 13:39:52 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
feb 15 13:39:52 linux kernel: ACPI: button: Power Button [PWRB]
feb 15 13:39:52 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
feb 15 13:39:52 linux kernel: ACPI: button: Power Button [PWRF]
feb 15 13:39:52 linux kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1098
feb 15 13:39:52 linux kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
feb 15 13:39:52 linux kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
feb 15 13:39:52 linux kernel: Non-volatile memory driver v1.3
feb 15 13:39:52 linux kernel: Linux agpgart interface v0.103
feb 15 13:39:52 linux kernel: ACPI: bus type drm_connector registered
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: version 3.0
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: 4/6 ports implemented (port mask 0x33)
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
feb 15 13:39:52 linux kernel: scsi host0: ahci
feb 15 13:39:52 linux kernel: scsi host1: ahci
feb 15 13:39:52 linux kernel: scsi host2: ahci
feb 15 13:39:52 linux kernel: scsi host3: ahci
feb 15 13:39:52 linux kernel: scsi host4: ahci
feb 15 13:39:52 linux kernel: scsi host5: ahci
feb 15 13:39:52 linux kernel: ata1: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80100 irq 31 lpm-pol 3
feb 15 13:39:52 linux kernel: ata2: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80180 irq 31 lpm-pol 3
feb 15 13:39:52 linux kernel: ata3: DUMMY
feb 15 13:39:52 linux kernel: ata4: DUMMY
feb 15 13:39:52 linux kernel: ata5: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80300 irq 31 lpm-pol 3
feb 15 13:39:52 linux kernel: ata6: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80380 irq 31 lpm-pol 3
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
feb 15 13:39:52 linux kernel: Freeing initrd memory: 37980K
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
feb 15 13:39:52 linux kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 13:39:52 linux kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb1: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb1: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb1: SerialNumber: 0000:01:00.0
feb 15 13:39:52 linux kernel: hub 1-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 1-0:1.0: 9 ports detected
feb 15 13:39:52 linux kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 13:39:52 linux kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb2: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb2: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb2: SerialNumber: 0000:01:00.0
feb 15 13:39:52 linux kernel: hub 2-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 2-0:1.0: 3 ports detected
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 3
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 4
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 13:39:52 linux kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb3: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb3: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb3: SerialNumber: 0000:04:00.3
feb 15 13:39:52 linux kernel: hub 3-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 3-0:1.0: 4 ports detected
feb 15 13:39:52 linux kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 13:39:52 linux kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb4: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb4: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb4: SerialNumber: 0000:04:00.3
feb 15 13:39:52 linux kernel: hub 4-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 4-0:1.0: 2 ports detected
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 5
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: xHCI Host Controller
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 6
feb 15 13:39:52 linux kernel: xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 13:39:52 linux kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb5: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb5: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb5: SerialNumber: 0000:04:00.4
feb 15 13:39:52 linux kernel: hub 5-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 5-0:1.0: 4 ports detected
feb 15 13:39:52 linux kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 13:39:52 linux kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 13:39:52 linux kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 13:39:52 linux kernel: usb usb6: Product: xHCI Host Controller
feb 15 13:39:52 linux kernel: usb usb6: Manufacturer: Linux 6.12.71-1-lts xhci-hcd
feb 15 13:39:52 linux kernel: usb usb6: SerialNumber: 0000:04:00.4
feb 15 13:39:52 linux kernel: hub 6-0:1.0: USB hub found
feb 15 13:39:52 linux kernel: hub 6-0:1.0: 2 ports detected
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver usbserial_generic
feb 15 13:39:52 linux kernel: usbserial: USB Serial support registered for generic
feb 15 13:39:52 linux kernel: rtc_cmos 00:03: RTC can wake from S4
feb 15 13:39:52 linux kernel: rtc_cmos 00:03: registered as rtc0
feb 15 13:39:52 linux kernel: rtc_cmos 00:03: setting system clock to 2026-02-15T12:39:46 UTC (1771159186)
feb 15 13:39:52 linux kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
feb 15 13:39:52 linux kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
feb 15 13:39:52 linux kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
feb 15 13:39:52 linux kernel: fbcon: Deferring console take-over
feb 15 13:39:52 linux kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
feb 15 13:39:52 linux kernel: hid: raw HID events driver (C) Jiri Kosina
feb 15 13:39:52 linux kernel: drop_monitor: Initializing network drop monitor service
feb 15 13:39:52 linux kernel: NET: Registered PF_INET6 protocol family
feb 15 13:39:52 linux kernel: Segment Routing with IPv6
feb 15 13:39:52 linux kernel: RPL Segment Routing with IPv6
feb 15 13:39:52 linux kernel: In-situ OAM (IOAM) with IPv6
feb 15 13:39:52 linux kernel: NET: Registered PF_PACKET protocol family
feb 15 13:39:52 linux kernel: microcode: Current revision: 0x0a500012
feb 15 13:39:52 linux kernel: microcode: Updated early from: 0x0a50000c
feb 15 13:39:52 linux kernel: resctrl: L3 allocation detected
feb 15 13:39:52 linux kernel: resctrl: MB allocation detected
feb 15 13:39:52 linux kernel: resctrl: L3 monitoring detected
feb 15 13:39:52 linux kernel: IPI shorthand broadcast: enabled
feb 15 13:39:52 linux kernel: sched_clock: Marking stable (442674337, 266224)->(505828911, -62888350)
feb 15 13:39:52 linux kernel: registered taskstats version 1
feb 15 13:39:52 linux kernel: Loading compiled-in X.509 certificates
feb 15 13:39:52 linux kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 9f44b3a1c67bff12c24ff31b17f3c202eaedd156'
feb 15 13:39:52 linux kernel: zswap: loaded using pool zstd/zsmalloc
feb 15 13:39:52 linux kernel: Demotion targets for Node 0: null
feb 15 13:39:52 linux kernel: Key type .fscrypt registered
feb 15 13:39:52 linux kernel: Key type fscrypt-provisioning registered
feb 15 13:39:52 linux kernel: PM:   Magic number: 14:506:683
feb 15 13:39:52 linux kernel: acpi STK0005A:00: hash matches
feb 15 13:39:52 linux kernel: RAS: Correctable Errors collector initialized.
feb 15 13:39:52 linux kernel: clk: Disabling unused clocks
feb 15 13:39:52 linux kernel: PM: genpd: Disabling unused power domains
feb 15 13:39:52 linux kernel: usb 3-2: new high-speed USB device number 2 using xhci_hcd
feb 15 13:39:52 linux kernel: usb 5-1: new full-speed USB device number 2 using xhci_hcd
feb 15 13:39:52 linux kernel: usb 1-4: new low-speed USB device number 2 using xhci_hcd
feb 15 13:39:52 linux kernel: usb 3-2: New USB device found, idVendor=2040, idProduct=5500, bcdDevice= 0.01
feb 15 13:39:52 linux kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
feb 15 13:39:52 linux kernel: usb 3-2: Product: WinTV MiniStick
feb 15 13:39:52 linux kernel: usb 3-2: Manufacturer: Hauppauge Computer Works
feb 15 13:39:52 linux kernel: usb 3-2: SerialNumber: f05cefe8
feb 15 13:39:52 linux kernel: usb 5-1: New USB device found, idVendor=045e, idProduct=0288, bcdDevice= 1.21
feb 15 13:39:52 linux kernel: usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
feb 15 13:39:52 linux kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
feb 15 13:39:52 linux kernel: ata1.00: Model 'CT120BX300SSD1', rev 'M2CR010', applying quirks: nolpm
feb 15 13:39:52 linux kernel: ata1.00: LPM support broken, forcing max_power
feb 15 13:39:52 linux kernel: ata1.00: ATA-9: CT120BX300SSD1, M2CR010, max UDMA/133
feb 15 13:39:52 linux kernel: ata1.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 32), AA
feb 15 13:39:52 linux kernel: ata1.00: Features: Dev-Sleep
feb 15 13:39:52 linux kernel: ata1.00: LPM support broken, forcing max_power
feb 15 13:39:52 linux kernel: ata1.00: configured for UDMA/133
feb 15 13:39:52 linux kernel: ahci 0000:01:00.1: port does not support device sleep
feb 15 13:39:52 linux kernel: scsi 0:0:0:0: Direct-Access     ATA      CT120BX300SSD1   010  PQ: 0 ANSI: 5
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] Write Protect is off
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
feb 15 13:39:52 linux kernel:  sda: sda1 sda2 sda3
feb 15 13:39:52 linux kernel: hub 5-1:1.0: USB hub found
feb 15 13:39:52 linux kernel: sd 0:0:0:0: [sda] Attached SCSI disk
feb 15 13:39:52 linux kernel: hub 5-1:1.0: 3 ports detected
feb 15 13:39:52 linux kernel: usb 5-2: new low-speed USB device number 3 using xhci_hcd
feb 15 13:39:52 linux kernel: usb 1-4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
feb 15 13:39:52 linux kernel: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
feb 15 13:39:52 linux kernel: usb 1-4: Product: USB Optical Mouse
feb 15 13:39:52 linux kernel: usb 1-4: Manufacturer: Logitech
feb 15 13:39:52 linux kernel: usb 5-2: New USB device found, idVendor=0461, idProduct=3f41, bcdDevice= 9.19
feb 15 13:39:52 linux kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
feb 15 13:39:52 linux kernel: usb 5-2: Product: HP Wired Desktop 320K Keyboard
feb 15 13:39:52 linux kernel: usb 5-2: Manufacturer: Primax
feb 15 13:39:52 linux kernel: ata2: SATA link down (SStatus 0 SControl 300)
feb 15 13:39:52 linux kernel: usb 5-1.1: new full-speed USB device number 4 using xhci_hcd
feb 15 13:39:52 linux kernel: usb 5-1.1: New USB device found, idVendor=045e, idProduct=0289, bcdDevice= 1.21
feb 15 13:39:52 linux kernel: usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
feb 15 13:39:52 linux kernel: tsc: Refined TSC clocksource calibration: 3892.669 MHz
feb 15 13:39:52 linux kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70389a1c830, max_idle_ns: 881590702409 ns
feb 15 13:39:52 linux kernel: clocksource: Switched to clocksource tsc
feb 15 13:39:52 linux kernel: ata5: SATA link down (SStatus 0 SControl 330)
feb 15 13:39:52 linux kernel: ata6: SATA link down (SStatus 0 SControl 330)
feb 15 13:39:52 linux kernel: Freeing unused decrypted memory: 2028K
feb 15 13:39:52 linux kernel: Freeing unused kernel image (initmem) memory: 4296K
feb 15 13:39:52 linux kernel: Write protecting the kernel read-only data: 34816k
feb 15 13:39:52 linux kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
feb 15 13:39:52 linux kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
feb 15 13:39:52 linux kernel: rodata_test: all tests were successful
feb 15 13:39:52 linux kernel: Run /init as init process
feb 15 13:39:52 linux kernel:   with arguments:
feb 15 13:39:52 linux kernel:     /init
feb 15 13:39:52 linux kernel:   with environment:
feb 15 13:39:52 linux kernel:     HOME=/
feb 15 13:39:52 linux kernel:     TERM=linux
feb 15 13:39:52 linux kernel: fbcon: Taking over console
feb 15 13:39:52 linux kernel: Console: switching to colour frame buffer device 240x67
feb 15 13:39:52 linux kernel: ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
feb 15 13:39:52 linux kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input2
feb 15 13:39:52 linux kernel: [drm] amdgpu kernel modesetting enabled.
feb 15 13:39:52 linux kernel: amdgpu: Virtual CRAT table created for CPU
feb 15 13:39:52 linux kernel: amdgpu: Topology: Add CPU node
feb 15 13:39:52 linux kernel: [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1002:0x1636 0xC9).
feb 15 13:39:52 linux kernel: [drm] register mmio base: 0xFCD00000
feb 15 13:39:52 linux kernel: [drm] register mmio size: 524288
feb 15 13:39:52 linux kernel: [drm] add ip block number 0 <soc15_common>
feb 15 13:39:52 linux kernel: [drm] add ip block number 1 <gmc_v9_0>
feb 15 13:39:52 linux kernel: [drm] add ip block number 2 <vega10_ih>
feb 15 13:39:52 linux kernel: [drm] add ip block number 3 <psp>
feb 15 13:39:52 linux kernel: [drm] add ip block number 4 <smu>
feb 15 13:39:52 linux kernel: [drm] add ip block number 5 <dm>
feb 15 13:39:52 linux kernel: [drm] add ip block number 6 <gfx_v9_0>
feb 15 13:39:52 linux kernel: [drm] add ip block number 7 <sdma_v4_0>
feb 15 13:39:52 linux kernel: [drm] add ip block number 8 <vcn_v2_0>
feb 15 13:39:52 linux kernel: [drm] add ip block number 9 <jpeg_v2_0>
feb 15 13:39:52 linux kernel: [drm] BIOS signature incorrect 0 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR
feb 15 13:39:52 linux kernel: amdgpu: ATOM BIOS: 13-CEZANNE-019
feb 15 13:39:52 linux kernel: Console: switching to colour dummy device 80x25
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: vgaarb: deactivate vga console
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: MODE2 reset
feb 15 13:39:52 linux kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
feb 15 13:39:52 linux kernel: [drm] Detected VRAM RAM=512M, BAR=512M
feb 15 13:39:52 linux kernel: [drm] RAM width 128bits DDR4
feb 15 13:39:52 linux kernel: [drm] amdgpu: 512M of VRAM memory ready
feb 15 13:39:52 linux kernel: [drm] amdgpu: 3652M of GTT memory ready.
feb 15 13:39:52 linux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
feb 15 13:39:52 linux kernel: [drm] PCIE GART of 1024M enabled.
feb 15 13:39:52 linux kernel: [drm] PTB located at 0x000000F41FC00000
feb 15 13:39:52 linux kernel: [drm] Loading DMUB firmware via PSP: version=0x0101002B
feb 15 13:39:52 linux kernel: [drm] Found VCN firmware Version ENC: 1.24 DEC: 8 VEP: 0 Revision: 9
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: reserve 0x400000 from 0xf41f800000 for PSP TMR
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully!
feb 15 13:39:52 linux kernel: [drm] Display Core v3.2.301 initialized on DCN 2.1
feb 15 13:39:52 linux kernel: [drm] DP-HDMI FRL PCON supported
feb 15 13:39:52 linux kernel: [drm] DMUB hardware initialized: version=0x0101002B
feb 15 13:39:52 linux kernel: [drm] kiq ring mec 2 pipe 1 q 0
feb 15 13:39:52 linux kernel: kfd kfd: amdgpu: Allocated 3969056 bytes on gart
feb 15 13:39:52 linux kernel: kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
feb 15 13:39:52 linux kernel: amdgpu: Virtual CRAT table created for GPU
feb 15 13:39:52 linux kernel: amdgpu: Topology: Add dGPU node [0x1638:0x1002]
feb 15 13:39:52 linux kernel: kfd kfd: amdgpu: added device 1002:1638
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: amdgpu: Runtime PM not available
feb 15 13:39:52 linux kernel: [drm] Initialized amdgpu 3.61.0 for 0000:04:00.0 on minor 1
feb 15 13:39:52 linux kernel: fbcon: amdgpudrmfb (fb0) is primary device
feb 15 13:39:52 linux kernel: [drm] pre_validate_dsc:1629 MST_DSC dsc precompute is not needed
feb 15 13:39:52 linux kernel: Console: switching to colour frame buffer device 240x67
feb 15 13:39:52 linux kernel: amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device
feb 15 13:39:52 linux kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
feb 15 13:39:52 linux kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
feb 15 13:39:52 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver usbhid
feb 15 13:39:52 linux kernel: usbhid: USB HID core driver
feb 15 13:39:52 linux kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-4/1-4:1.0/0003:046D:C077.0001/input/input4
feb 15 13:39:52 linux kernel: hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-4/input0
feb 15 13:39:52 linux kernel: input: Primax HP Wired Desktop 320K Keyboard as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.0/0003:0461:3F41.0002/input/input5
feb 15 13:39:52 linux kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
feb 15 13:39:52 linux kernel: hid-generic 0003:0461:3F41.0002: input,hidraw1: USB HID v1.11 Keyboard [Primax HP Wired Desktop 320K Keyboard] on usb-0000:04:00.4-2/input0
feb 15 13:39:52 linux kernel: input: Primax HP Wired Desktop 320K Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.1/0003:0461:3F41.0003/input/input6
feb 15 13:39:52 linux kernel: input: Primax HP Wired Desktop 320K Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.1/0003:0461:3F41.0003/input/input7
feb 15 13:39:52 linux kernel: hid-generic 0003:0461:3F41.0003: input,hidraw2: USB HID v1.11 Device [Primax HP Wired Desktop 320K Keyboard] on usb-0000:04:00.4-2/input1
feb 15 13:39:52 linux kernel: EXT4-fs (sda1): mounted filesystem 6873b23b-fe1f-4788-9932-092a6207270e r/w with ordered data mode. Quota mode: none.
feb 15 13:39:52 linux systemd[1]: systemd 259.1-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
feb 15 13:39:52 linux systemd[1]: Detected architecture x86-64.
feb 15 13:39:52 linux systemd[1]: Hostname set to <linux>.
feb 15 13:39:52 linux systemd[1]: bpf-restrict-fs: LSM BPF program attached
feb 15 13:39:52 linux systemd[1]: Queued start job for default target Graphical Interface.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/dirmngr.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/getty.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/gpg-agent.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/gpg-agent-browser.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/gpg-agent-extra.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/gpg-agent-ssh.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/keyboxd.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/modprobe.
feb 15 13:39:52 linux systemd[1]: Created slice Slice /system/systemd-fsck.
feb 15 13:39:52 linux systemd[1]: Created slice User and Session Slice.
feb 15 13:39:52 linux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
feb 15 13:39:52 linux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
feb 15 13:39:52 linux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
feb 15 13:39:52 linux systemd[1]: Expecting device /dev/disk/by-uuid/016650e9-4abc-4b37-89e4-6daeec3d40b3...
feb 15 13:39:52 linux systemd[1]: Expecting device /dev/disk/by-uuid/E0E8-2FDD...
feb 15 13:39:52 linux systemd[1]: Reached target Local Encrypted Volumes.
feb 15 13:39:52 linux systemd[1]: Reached target Image Downloads.
feb 15 13:39:52 linux systemd[1]: Reached target Local Integrity Protected Volumes.
feb 15 13:39:52 linux systemd[1]: Reached target Path Units.
feb 15 13:39:52 linux systemd[1]: Reached target Remote File Systems.
feb 15 13:39:52 linux systemd[1]: Reached target Slice Units.
feb 15 13:39:52 linux systemd[1]: Reached target Swaps.
feb 15 13:39:52 linux systemd[1]: Reached target Local Verity Protected Volumes.
feb 15 13:39:52 linux systemd[1]: Listening on Device-mapper event daemon FIFOs.
feb 15 13:39:52 linux systemd[1]: Listening on LVM2 poll daemon socket.
feb 15 13:39:52 linux systemd[1]: Listening on Query the User Interactively for a Password.
feb 15 13:39:52 linux systemd[1]: Listening on Process Core Dump Socket.
feb 15 13:39:52 linux systemd[1]: Listening on Credential Encryption/Decryption.
feb 15 13:39:52 linux systemd[1]: Listening on Factory Reset Management.
feb 15 13:39:52 linux systemd[1]: Listening on Journal Socket (/dev/log).
feb 15 13:39:52 linux systemd[1]: Listening on Journal Sockets.
feb 15 13:39:52 linux systemd[1]: Listening on Console Output Muting Service Socket.
feb 15 13:39:52 linux systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
feb 15 13:39:52 linux systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: Listening on Disk Repartitioning Service Socket.
feb 15 13:39:52 linux systemd[1]: Listening on udev Control Socket.
feb 15 13:39:52 linux systemd[1]: Listening on udev Kernel Socket.
feb 15 13:39:52 linux systemd[1]: Listening on udev Varlink Socket.
feb 15 13:39:52 linux systemd[1]: Mounting Huge Pages File System...
feb 15 13:39:52 linux systemd[1]: Mounting POSIX Message Queue File System...
feb 15 13:39:52 linux systemd[1]: Mounting Kernel Debug File System...
feb 15 13:39:52 linux systemd[1]: Mounting Kernel Trace File System...
feb 15 13:39:52 linux systemd[1]: Starting Create List of Static Device Nodes...
feb 15 13:39:52 linux systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
feb 15 13:39:52 linux systemd[1]: Mounting Kernel Configuration File System...
feb 15 13:39:52 linux systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
feb 15 13:39:52 linux systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
feb 15 13:39:52 linux systemd[1]: Mounting FUSE Control File System...
feb 15 13:39:52 linux systemd[1]: File System Check on Root Device skipped, unmet condition check ConditionPathIsReadWrite=!/
feb 15 13:39:52 linux systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
feb 15 13:39:52 linux systemd[1]: Starting Journal Service...
feb 15 13:39:52 linux systemd[1]: Starting Load Kernel Modules...
feb 15 13:39:52 linux systemd[1]: TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: Starting Remount Root and Kernel File Systems...
feb 15 13:39:52 linux systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: Starting Load udev Rules from Credentials...
feb 15 13:39:52 linux systemd[1]: Starting Coldplug All udev Devices...
feb 15 13:39:52 linux systemd[1]: Finished Create List of Static Device Nodes.
feb 15 13:39:52 linux systemd[1]: Mounted Huge Pages File System.
feb 15 13:39:52 linux systemd[1]: Mounted POSIX Message Queue File System.
feb 15 13:39:52 linux systemd[1]: Mounted Kernel Debug File System.
feb 15 13:39:52 linux systemd[1]: Mounted Kernel Trace File System.
feb 15 13:39:52 linux systemd[1]: Mounted Kernel Configuration File System.
feb 15 13:39:52 linux systemd[1]: Mounted FUSE Control File System.
feb 15 13:39:52 linux systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
feb 15 13:39:52 linux systemd[1]: Finished Load udev Rules from Credentials.
feb 15 13:39:52 linux systemd-journald[356]: Collecting audit messages is disabled.
feb 15 13:39:52 linux kernel: i2c_dev: i2c /dev entries driver
feb 15 13:39:52 linux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
feb 15 13:39:52 linux systemd[1]: Finished Load Kernel Modules.
feb 15 13:39:52 linux systemd[1]: Starting Apply Kernel Variables...
feb 15 13:39:52 linux kernel: EXT4-fs (sda1): re-mounted 6873b23b-fe1f-4788-9932-092a6207270e.
feb 15 13:39:52 linux systemd[1]: Finished Remount Root and Kernel File Systems.
feb 15 13:39:52 linux systemd[1]: Rebuild Hardware Database skipped, unmet condition check ConditionNeedsUpdate=/etc
feb 15 13:39:52 linux systemd[1]: Starting Load/Save OS Random Seed...
feb 15 13:39:52 linux systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: TPM PCR NvPCR Initialization Separator skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 13:39:52 linux systemd[1]: Finished Apply Kernel Variables.
feb 15 13:39:52 linux systemd[1]: Starting CLI Netfilter Manager...
feb 15 13:39:52 linux systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
feb 15 13:39:52 linux systemd[1]: Create System Users skipped, no trigger condition checks were met.
feb 15 13:39:52 linux systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
feb 15 13:39:52 linux systemd[1]: Starting Create Static Device Nodes in /dev...
feb 15 13:39:52 linux systemd[1]: Finished Create Static Device Nodes in /dev.
feb 15 13:39:52 linux systemd[1]: Finished Load/Save OS Random Seed.
feb 15 13:39:52 linux systemd[1]: Reached target Preparation for Local File Systems.
feb 15 13:39:52 linux systemd[1]: Repartition Root Disk skipped, no trigger condition checks were met.
feb 15 13:39:52 linux systemd[1]: Starting Rule-based Manager for Device Events and Files...
feb 15 13:39:52 linux systemd[1]: Finished CLI Netfilter Manager.
feb 15 13:39:52 linux systemd[1]: Started Journal Service.
feb 15 13:39:52 linux systemd-journald[356]: Received client request to flush runtime journal.
feb 15 13:39:52 linux kernel: mousedev: PS/2 mouse device common for all mice
feb 15 13:39:52 linux kernel: ccp 0000:04:00.2: ccp: unable to access the device: you might be running a broken BIOS.
feb 15 13:39:52 linux kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
feb 15 13:39:52 linux kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
feb 15 13:39:52 linux kernel: ccp 0000:04:00.2: tee enabled
feb 15 13:39:52 linux kernel: ccp 0000:04:00.2: psp enabled
feb 15 13:39:52 linux kernel: i2c i2c-4: Successfully instantiated SPD at 0x50
feb 15 13:39:52 linux kernel: i2c i2c-4: Successfully instantiated SPD at 0x51
feb 15 13:39:52 linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
feb 15 13:39:52 linux kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
feb 15 13:39:52 linux kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
feb 15 13:39:52 linux kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
feb 15 13:39:52 linux kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
feb 15 13:39:52 linux kernel: input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-1/5-1.1/5-1.1:1.0/input/input9
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver xpad
feb 15 13:39:52 linux kernel: mc: Linux media interface: v0.10
feb 15 13:39:52 linux kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
feb 15 13:39:52 linux kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
feb 15 13:39:52 linux kernel: cryptd: max_cpu_qlen set to 1000
feb 15 13:39:52 linux kernel: smsusb:smsusb_probe: board id=8, interface number 0
feb 15 13:39:52 linux kernel: smsusb:siano_media_device_register: media controller created
feb 15 13:39:52 linux kernel: r8169 0000:03:00.0 eth0: RTL8168h/8111h, a8:a1:59:ef:d6:59, XID 541, IRQ 60
feb 15 13:39:52 linux kernel: r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
feb 15 13:39:52 linux kernel: ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
feb 15 13:39:52 linux kernel: ee1004 4-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
feb 15 13:39:52 linux kernel: AES CTR mode by8 optimization enabled
feb 15 13:39:52 linux kernel: rc_core: IR keymap rc-hauppauge not found
feb 15 13:39:52 linux kernel: Registered IR keymap rc-empty
feb 15 13:39:52 linux kernel: rc rc0: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb3/3-2/rc/rc0
feb 15 13:39:52 linux kernel: rc rc0: lirc_dev: driver smsmdtv registered at minor = 0, raw IR receiver, no transmitter
feb 15 13:39:52 linux kernel: input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb3/3-2/rc/rc0/input10
feb 15 13:39:52 linux kernel: smsusb:smsusb_probe: Device initialized with return code 0
feb 15 13:39:52 linux kernel: snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
feb 15 13:39:52 linux kernel: snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
feb 15 13:39:52 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input11
feb 15 13:39:52 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input12
feb 15 13:39:52 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input13
feb 15 13:39:52 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input14
feb 15 13:39:52 linux kernel: dvbdev: DVB: registering new adapter (Hauppauge WinTV MiniStick)
feb 15 13:39:52 linux kernel: dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
feb 15 13:39:52 linux kernel: usb 3-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
feb 15 13:39:52 linux kernel: dvbdev: dvb_create_media_entity: media entity 'Siano Mobile Digital MDTV Receiver' registered.
feb 15 13:39:52 linux kernel: smsdvb:smsdvb_hotplug: DVB interface registered.
feb 15 13:39:52 linux kernel: usbcore: registered new interface driver smsusb
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
feb 15 13:39:52 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
feb 15 13:39:52 linux kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input15
feb 15 13:39:52 linux kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input16
feb 15 13:39:52 linux kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input17
feb 15 13:39:52 linux kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input18
feb 15 13:39:52 linux kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input19
feb 15 13:39:52 linux kernel: kvm_amd: TSC scaling supported
feb 15 13:39:52 linux kernel: kvm_amd: Nested Virtualization enabled
feb 15 13:39:52 linux kernel: kvm_amd: Nested Paging enabled
feb 15 13:39:52 linux kernel: kvm_amd: LBR virtualization supported
feb 15 13:39:52 linux kernel: kvm_amd: Virtual VMLOAD VMSAVE supported
feb 15 13:39:52 linux kernel: kvm_amd: Virtual GIF supported
feb 15 13:39:53 linux kernel: intel_rapl_common: Found RAPL domain package
feb 15 13:39:53 linux kernel: intel_rapl_common: Found RAPL domain core
feb 15 13:39:53 linux kernel: amd_atl: AMD Address Translation Library initialized
feb 15 13:39:53 linux kernel: EXT4-fs (sda2): mounted filesystem 016650e9-4abc-4b37-89e4-6daeec3d40b3 r/w with ordered data mode. Quota mode: none.
feb 15 13:39:53 linux kernel: nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
feb 15 13:39:53 linux kernel: Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
feb 15 13:39:53 linux kernel: r8169 0000:03:00.0 eth0: Link is Down
feb 15 13:39:55 linux kernel: r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
$ cat /etc/udev/rules.d/99-usb-audio-volume.rules
ACTION=="add", SUBSYSTEM=="sound", ATTRS{idVendor}=="08bb", ATTRS{idProduct}=="2902", RUN+="/bin/sh -c 'sleep 1 && /usr/bin/amixer -c Device sset Speaker 100%'"

I deleted '99-usb-audio-volume.rules' but it didn't solve the issue

Last edited by quellen (2026-02-15 12:58:11)


sorry for my bad english

Offline

#5 2026-02-15 14:56:17

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

I also tried installing linux-lts, but it didn't solve it.

Rather try to downgrade
a) the kernel
b) https://archlinux.org/packages/core/any … re-amdgpu/ (though that's older anyway)

I've already attempted to force a custom EDID via GRUB (drm.edid_firmware=HDMI-A-2:edid/my_monitor_edid.bin), but it didn't solve the problem.

xrandr shows the output on HDMI-A-1 ?

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/

sudo journalctl -k -b

That neither has a custom edid enforced nor see to cover a TTY switch?

becomes completely unresponsive — I have to reset it using the case button

Do ssh or https://wiki.archlinux.org/title/Keyboa … el_(SysRq) still work (nb. you've to explicitly enable the latter first and you want to run sysrq + REISUB and give is some seconds for each stage)

Offline

#6 2026-02-15 17:10:52

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

Rather try to downgrade
a) the kernel
b) https://archlinux.org/packages/core/any … re-amdgpu/ (though that's older anyway)

i have downgrade with very old version but it didn't solve:

pacman -U https://archive.archlinux.org/packages/l/linux-lts/linux-lts-6.12.15-1-x86_64.pkg.tar.zst
pacman -U https://archive.archlinux.org/packages/l/linux-firmware-amdgpu/linux-firmware-amdgpu-20250708-1-any.pkg.tar.zst

xrandr shows the output on HDMI-A-1 ?

for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done

You'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/

$ for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done
/sys/class/drm/card1
/sys/class/drm/card1/edid: No such file or directory
=================
/sys/class/drm/card1-DP-1
EDID of '/sys/class/drm/card1-DP-1/edid' was empty.
=================
/sys/class/drm/card1-HDMI-A-1
EDID of '/sys/class/drm/card1-HDMI-A-1/edid' was empty.
=================
/sys/class/drm/card1-HDMI-A-2
edid-decode (hex):

00 ff ff ff ff ff ff 00 22 f0 58 32 01 01 01 01
31 19 01 03 80 35 1e 78 2a 05 65 a7 56 52 9c 27
0f 50 54 21 08 00 d1 c0 81 c0 a9 c0 b3 00 95 00
81 80 81 00 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 0f 28 21 00 00 1e 00 00 00 fd 00 32 3c 1e
50 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48
50 20 32 34 63 77 0a 20 20 20 20 20 00 00 00 ff
00 36 43 4d 35 34 39 31 30 31 36 0a 20 20 01 4f

02 03 19 b1 49 90 1f 04 13 03 02 12 11 01 67 03
0c 00 20 00 00 22 e2 00 2b 02 3a 80 18 71 38 2d
40 58 2c 45 00 0f 28 21 00 00 1e 02 3a 80 d0 72
38 2d 40 58 2c 45 00 0f 28 21 00 00 1e 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 29

----------------

Block 0, Base EDID:
  EDID Structure Version & Revision: 1.3
  Vendor & Product Identification:
    Manufacturer: HWP
    Model: 12888
    Serial Number: 16843009 (0x01010101)
    Made in: week 49 of 2015
  Basic Display Parameters & Features:
    Digital display
    Maximum image size: 53 cm x 30 cm
    Gamma: 2.20
    DPMS levels: Off
    RGB color display
    First detailed timing is the preferred timing
  Color Characteristics:
    Red  : 0.6523, 0.3359
    Green: 0.3212, 0.6103
    Blue : 0.1533, 0.0605
    White: 0.3134, 0.3291
  Established Timings I & II:
    DMT 0x04:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
    DMT 0x09:   800x600    60.316541 Hz   4:3     37.879 kHz     40.000000 MHz
    DMT 0x10:  1024x768    60.003840 Hz   4:3     48.363 kHz     65.000000 MHz
  Standard Timings:
    DMT 0x52:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz
    DMT 0x55:  1280x720    60.000000 Hz  16:9     45.000 kHz     74.250000 MHz
    DMT 0x53:  1600x900    60.000000 Hz  16:9     60.000 kHz    108.000000 MHz (RB)
    DMT 0x3a:  1680x1050   59.954250 Hz  16:10    65.290 kHz    146.250000 MHz
    DMT 0x2f:  1440x900    59.887445 Hz  16:10    55.935 kHz    106.500000 MHz
    DMT 0x23:  1280x1024   60.019740 Hz   5:4     63.981 kHz    108.000000 MHz
    DMT 0x1c:  1280x800    59.810326 Hz  16:10    49.702 kHz     83.500000 MHz
  Detailed Timing Descriptors:
    DTD 1:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (527 mm x 296 mm)
                 Hfront   88 Hsync  44 Hback  148 Hpol P
                 Vfront    4 Vsync   5 Vback   36 Vpol P
    Display Range Limits:
      Monitor ranges (GTF): 50-60 Hz V, 30-80 kHz H, max dotclock 170 MHz
    Display Product Name: 'HP 24cw'
    Display Product Serial Number: '6CM5491016'
  Extension blocks: 1
Checksum: 0x4f

----------------

Block 1, CTA-861 Extension Block:
  Revision: 3
  Underscans IT Video Formats by default
  Supports YCbCr 4:4:4
  Supports YCbCr 4:2:2
  Native detailed modes: 1
  Video Data Block:
    VIC  16:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (native)
    VIC  31:  1920x1080   50.000000 Hz  16:9     56.250 kHz    148.500000 MHz
    VIC   4:  1280x720    60.000000 Hz  16:9     45.000 kHz     74.250000 MHz
    VIC  19:  1280x720    50.000000 Hz  16:9     37.500 kHz     74.250000 MHz
    VIC   3:   720x480    59.940060 Hz  16:9     31.469 kHz     27.000000 MHz
    VIC   2:   720x480    59.940060 Hz   4:3     31.469 kHz     27.000000 MHz
    VIC  18:   720x576    50.000000 Hz  16:9     31.250 kHz     27.000000 MHz
    VIC  17:   720x576    50.000000 Hz   4:3     31.250 kHz     27.000000 MHz
    VIC   1:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
  Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
    Source physical address: 2.0.0.0
    Maximum TMDS clock: 170 MHz
  Video Capability Data Block:
    YCbCr quantization: No Data
    RGB quantization: No Data
    PT scan behavior: Always Underscanned
    IT scan behavior: Always Underscanned
    CE scan behavior: Supports both over- and underscan
  Detailed Timing Descriptors:
    DTD 2:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (527 mm x 296 mm)
                 Hfront   88 Hsync  44 Hback  148 Hpol P
                 Vfront    4 Vsync   5 Vback   36 Vpol P
    DTD 3:  1920x1080   50.000000 Hz  16:9     56.250 kHz    148.500000 MHz (527 mm x 296 mm)
                 Hfront   88 Hsync  44 Hback  588 Hpol P
                 Vfront    4 Vsync   5 Vback   36 Vpol P
Checksum: 0x29  Unused space in Extension Block: 66 bytes
=================
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
HDMI-A-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-A-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 296mm
   1920x1080     60.00*+  50.00    50.00    59.94  
   1680x1050     59.88  
   1600x900      60.00  
   1280x1024     60.02  
   1440x900      59.90  
   1280x800      59.91  
   1280x720      60.00    50.00    59.94  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       60.00    59.94  
DisplayPort-0 disconnected (normal left inverted right x axis y axis)

sudo journalctl -k -b
That neither has a custom edid enforced nor see to cover a TTY switch?

feb 15 18:06:02 linux kernel: Linux version 6.12.15-1-lts (linux-lts@archlinux) (gcc (GCC) 14.2.1 20250207, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Tue, 18 Feb 2025 09:31:25 +0000
feb 15 18:06:02 linux kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=6873b23b-fe1f-4788-9932-092a6207270e rw
feb 15 18:06:02 linux kernel: BIOS-provided physical RAM map:
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000a20f000-0x000000000affffff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000000b020000-0x0000000098db6fff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x0000000098db7000-0x000000009a4f7fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000009a4f8000-0x000000009a542fff] ACPI data
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000009a543000-0x000000009bff5fff] ACPI NVS
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000009bff6000-0x000000009cdfefff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000009cdff000-0x000000009dffffff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000009e000000-0x00000000bfffffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x0000000100000000-0x000000023e2fffff] usable
feb 15 18:06:02 linux kernel: BIOS-e820: [mem 0x000000023e300000-0x000000023fffffff] reserved
feb 15 18:06:02 linux kernel: NX (Execute Disable) protection: active
feb 15 18:06:02 linux kernel: APIC: Static calls initialized
feb 15 18:06:02 linux kernel: SMBIOS 3.3.0 present.
feb 15 18:06:02 linux kernel: DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A520M-HVS, BIOS P2.10 02/24/2022
feb 15 18:06:02 linux kernel: DMI: Memory slots populated: 2/2
feb 15 18:06:02 linux kernel: tsc: Fast TSC calibration using PIT
feb 15 18:06:02 linux kernel: tsc: Detected 3892.800 MHz processor
feb 15 18:06:02 linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
feb 15 18:06:02 linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
feb 15 18:06:02 linux kernel: last_pfn = 0x23e300 max_arch_pfn = 0x400000000
feb 15 18:06:02 linux kernel: MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
feb 15 18:06:02 linux kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
feb 15 18:06:02 linux kernel: e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
feb 15 18:06:02 linux kernel: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
feb 15 18:06:02 linux kernel: Using GB pages for direct mapping
feb 15 18:06:02 linux kernel: RAMDISK: [mem 0x335bf000-0x35ad6fff]
feb 15 18:06:02 linux kernel: ACPI: Early table checksum verification disabled
feb 15 18:06:02 linux kernel: ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
feb 15 18:06:02 linux kernel: ACPI: XSDT 0x000000009BFDE728 0000CC (v01 ALASKA A M I    01072009 AMI  01000013)
feb 15 18:06:02 linux kernel: ACPI: FACP 0x000000009A535000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
feb 15 18:06:02 linux kernel: ACPI: DSDT 0x000000009A515000 0063C3 (v02 ALASKA A M I    01072009 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: FACS 0x000000009AFD9000 000040
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A53B000 0072B0 (v02 AMD    Artic    00000002 MSFT 04000000)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A537000 003ACF (v01 AMD    AMD AOD  00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A536000 0001AD (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
feb 15 18:06:02 linux kernel: ACPI: FIDT 0x000000009A52E000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
feb 15 18:06:02 linux kernel: ACPI: MCFG 0x000000009A52D000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
feb 15 18:06:02 linux kernel: ACPI: AAFT 0x000000009A52C000 0000ED (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
feb 15 18:06:02 linux kernel: ACPI: HPET 0x000000009A52B000 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A527000 002844 (v02 AMD    AmdTable 00000001 AMD  00000001)
feb 15 18:06:02 linux kernel: ACPI: CRAT 0x000000009A526000 000B68 (v01 AMD    AmdTable 00000001 AMD  00000001)
feb 15 18:06:02 linux kernel: ACPI: CDIT 0x000000009A525000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A524000 000D53 (v01 AMD    ArticIG2 00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A522000 0010AC (v01 AMD    ArticTPX 00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A51E000 003798 (v01 AMD    ArticN   00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: WSMT 0x000000009A51D000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
feb 15 18:06:02 linux kernel: ACPI: APIC 0x000000009A51C000 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A534000 000497 (v01 AMD    ArticPRN 00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A533000 00007D (v01 AMD    ArticDIS 00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A531000 0010AF (v01 AMD    ArticC   00000001 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: SSDT 0x000000009A530000 0000BF (v01 AMD    AmdTable 00001000 INTL 20120913)
feb 15 18:06:02 linux kernel: ACPI: FPDT 0x000000009A52F000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
feb 15 18:06:02 linux kernel: ACPI: Reserving FACP table memory at [mem 0x9a535000-0x9a535113]
feb 15 18:06:02 linux kernel: ACPI: Reserving DSDT table memory at [mem 0x9a515000-0x9a51b3c2]
feb 15 18:06:02 linux kernel: ACPI: Reserving FACS table memory at [mem 0x9afd9000-0x9afd903f]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a53b000-0x9a5422af]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a537000-0x9a53aace]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a536000-0x9a5361ac]
feb 15 18:06:02 linux kernel: ACPI: Reserving FIDT table memory at [mem 0x9a52e000-0x9a52e09b]
feb 15 18:06:02 linux kernel: ACPI: Reserving MCFG table memory at [mem 0x9a52d000-0x9a52d03b]
feb 15 18:06:02 linux kernel: ACPI: Reserving AAFT table memory at [mem 0x9a52c000-0x9a52c0ec]
feb 15 18:06:02 linux kernel: ACPI: Reserving HPET table memory at [mem 0x9a52b000-0x9a52b037]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a527000-0x9a529843]
feb 15 18:06:02 linux kernel: ACPI: Reserving CRAT table memory at [mem 0x9a526000-0x9a526b67]
feb 15 18:06:02 linux kernel: ACPI: Reserving CDIT table memory at [mem 0x9a525000-0x9a525028]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a524000-0x9a524d52]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a522000-0x9a5230ab]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a51e000-0x9a521797]
feb 15 18:06:02 linux kernel: ACPI: Reserving WSMT table memory at [mem 0x9a51d000-0x9a51d027]
feb 15 18:06:02 linux kernel: ACPI: Reserving APIC table memory at [mem 0x9a51c000-0x9a51c15d]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a534000-0x9a534496]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a533000-0x9a53307c]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a531000-0x9a5320ae]
feb 15 18:06:02 linux kernel: ACPI: Reserving SSDT table memory at [mem 0x9a530000-0x9a5300be]
feb 15 18:06:02 linux kernel: ACPI: Reserving FPDT table memory at [mem 0x9a52f000-0x9a52f043]
feb 15 18:06:02 linux kernel: No NUMA configuration found
feb 15 18:06:02 linux kernel: Faking a node at [mem 0x0000000000000000-0x000000023e2fffff]
feb 15 18:06:02 linux kernel: NODE_DATA(0) allocated [mem 0x23e2d52c0-0x23e2fffff]
feb 15 18:06:02 linux kernel: Zone ranges:
feb 15 18:06:02 linux kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
feb 15 18:06:02 linux kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
feb 15 18:06:02 linux kernel:   Normal   [mem 0x0000000100000000-0x000000023e2fffff]
feb 15 18:06:02 linux kernel:   Device   empty
feb 15 18:06:02 linux kernel: Movable zone start for each node
feb 15 18:06:02 linux kernel: Early memory node ranges
feb 15 18:06:02 linux kernel:   node   0: [mem 0x0000000000001000-0x000000000009cfff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x0000000000100000-0x0000000009bfefff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x000000000a20f000-0x000000000affffff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x000000000b020000-0x0000000098db6fff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x000000009cdff000-0x000000009dffffff]
feb 15 18:06:02 linux kernel:   node   0: [mem 0x0000000100000000-0x000000023e2fffff]
feb 15 18:06:02 linux kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000023e2fffff]
feb 15 18:06:02 linux kernel: On node 0, zone DMA: 1 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone DMA: 99 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone DMA32: 1025 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone DMA32: 15 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone DMA32: 32 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone DMA32: 16456 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone Normal: 8192 pages in unavailable ranges
feb 15 18:06:02 linux kernel: On node 0, zone Normal: 7424 pages in unavailable ranges
feb 15 18:06:02 linux kernel: ACPI: PM-Timer IO Port: 0x808
feb 15 18:06:02 linux kernel: CPU topo: Ignoring hot-pluggable APIC ID 0 in present package.
feb 15 18:06:02 linux kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
feb 15 18:06:02 linux kernel: IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
feb 15 18:06:02 linux kernel: IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
feb 15 18:06:02 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
feb 15 18:06:02 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
feb 15 18:06:02 linux kernel: ACPI: Using ACPI (MADT) for SMP configuration information
feb 15 18:06:02 linux kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
feb 15 18:06:02 linux kernel: CPU topo: Max. logical packages:   1
feb 15 18:06:02 linux kernel: CPU topo: Max. logical dies:       1
feb 15 18:06:02 linux kernel: CPU topo: Max. dies per package:   1
feb 15 18:06:02 linux kernel: CPU topo: Max. threads per core:   2
feb 15 18:06:02 linux kernel: CPU topo: Num. cores per package:     6
feb 15 18:06:02 linux kernel: CPU topo: Num. threads per package:  12
feb 15 18:06:02 linux kernel: CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs
feb 15 18:06:02 linux kernel: CPU topo: Rejected CPUs 20
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x98db7000-0x9a4f7fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x9a4f8000-0x9a542fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x9a543000-0x9bff5fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x9bff6000-0x9cdfefff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0x9e000000-0xbfffffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd5fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfd6fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfd700000-0xfe9fffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
feb 15 18:06:02 linux kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
feb 15 18:06:02 linux kernel: [mem 0xc0000000-0xefffffff] available for PCI devices
feb 15 18:06:02 linux kernel: Booting paravirtualized kernel on bare hardware
feb 15 18:06:02 linux kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
feb 15 18:06:02 linux kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
feb 15 18:06:02 linux kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
feb 15 18:06:02 linux kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
feb 15 18:06:02 linux kernel: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
feb 15 18:06:02 linux kernel: pcpu-alloc: [0] 08 09 10 11 
feb 15 18:06:02 linux kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=6873b23b-fe1f-4788-9932-092a6207270e rw
feb 15 18:06:02 linux kernel: Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-lts", will be passed to user space.
feb 15 18:06:02 linux kernel: random: crng init done
feb 15 18:06:02 linux kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
feb 15 18:06:02 linux kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
feb 15 18:06:02 linux kernel: Fallback order for Node 0: 0 
feb 15 18:06:02 linux kernel: Built 1 zonelists, mobility grouping on.  Total pages: 1932836
feb 15 18:06:02 linux kernel: Policy zone: Normal
feb 15 18:06:02 linux kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
feb 15 18:06:02 linux kernel: software IO TLB: area num 16.
feb 15 18:06:02 linux kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
feb 15 18:06:02 linux kernel: ftrace: allocating 51374 entries in 201 pages
feb 15 18:06:02 linux kernel: ftrace: allocated 201 pages with 4 groups
feb 15 18:06:02 linux kernel: Dynamic Preempt: voluntary
feb 15 18:06:02 linux kernel: rcu: Preemptible hierarchical RCU implementation.
feb 15 18:06:02 linux kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
feb 15 18:06:02 linux kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
feb 15 18:06:02 linux kernel:         Trampoline variant of Tasks RCU enabled.
feb 15 18:06:02 linux kernel:         Rude variant of Tasks RCU enabled.
feb 15 18:06:02 linux kernel:         Tracing variant of Tasks RCU enabled.
feb 15 18:06:02 linux kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
feb 15 18:06:02 linux kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
feb 15 18:06:02 linux kernel: RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 18:06:02 linux kernel: RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 18:06:02 linux kernel: RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
feb 15 18:06:02 linux kernel: NR_IRQS: 524544, nr_irqs: 1064, preallocated irqs: 16
feb 15 18:06:02 linux kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
feb 15 18:06:02 linux kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
feb 15 18:06:02 linux kernel: spurious 8259A interrupt: IRQ7.
feb 15 18:06:02 linux kernel: Console: colour dummy device 80x25
feb 15 18:06:02 linux kernel: printk: legacy console [tty0] enabled
feb 15 18:06:02 linux kernel: ACPI: Core revision 20240827
feb 15 18:06:02 linux kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
feb 15 18:06:02 linux kernel: APIC: Switch to symmetric I/O mode setup
feb 15 18:06:02 linux kernel: x2apic: IRQ remapping doesn't support X2APIC mode
feb 15 18:06:02 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
feb 15 18:06:02 linux kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x70399329a5b, max_idle_ns: 881590677571 ns
feb 15 18:06:02 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7788.00 BogoMIPS (lpj=12976000)
feb 15 18:06:02 linux kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
feb 15 18:06:02 linux kernel: LVT offset 1 assigned for vector 0xf9
feb 15 18:06:02 linux kernel: LVT offset 2 assigned for vector 0xf4
feb 15 18:06:02 linux kernel: Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
feb 15 18:06:02 linux kernel: Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
feb 15 18:06:02 linux kernel: process: using mwait in idle threads
feb 15 18:06:02 linux kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
feb 15 18:06:02 linux kernel: Spectre V2 : Mitigation: Retpolines
feb 15 18:06:02 linux kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
feb 15 18:06:02 linux kernel: Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
feb 15 18:06:02 linux kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
feb 15 18:06:02 linux kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
feb 15 18:06:02 linux kernel: Spectre V2 : User space: Mitigation: STIBP always-on protection
feb 15 18:06:02 linux kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
feb 15 18:06:02 linux kernel: Speculative Return Stack Overflow: Mitigation: Safe RET
feb 15 18:06:02 linux kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
feb 15 18:06:02 linux kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
feb 15 18:06:02 linux kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
feb 15 18:06:02 linux kernel: x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
feb 15 18:06:02 linux kernel: x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
feb 15 18:06:02 linux kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
feb 15 18:06:02 linux kernel: x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
feb 15 18:06:02 linux kernel: x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
feb 15 18:06:02 linux kernel: x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
feb 15 18:06:02 linux kernel: Freeing SMP alternatives memory: 40K
feb 15 18:06:02 linux kernel: pid_max: default: 32768 minimum: 301
feb 15 18:06:02 linux kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
feb 15 18:06:02 linux kernel: landlock: Up and running.
feb 15 18:06:02 linux kernel: Yama: becoming mindful.
feb 15 18:06:02 linux kernel: LSM support for eBPF active
feb 15 18:06:02 linux kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
feb 15 18:06:02 linux kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
feb 15 18:06:02 linux kernel: smpboot: CPU0: AMD Ryzen 5 5600G with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
feb 15 18:06:02 linux kernel: Performance Events: Fam17h+ core perfctr, AMD PMU driver.
feb 15 18:06:02 linux kernel: ... version:                0
feb 15 18:06:02 linux kernel: ... bit width:              48
feb 15 18:06:02 linux kernel: ... generic registers:      6
feb 15 18:06:02 linux kernel: ... value mask:             0000ffffffffffff
feb 15 18:06:02 linux kernel: ... max period:             00007fffffffffff
feb 15 18:06:02 linux kernel: ... fixed-purpose events:   0
feb 15 18:06:02 linux kernel: ... event mask:             000000000000003f
feb 15 18:06:02 linux kernel: signal: max sigframe size: 3376
feb 15 18:06:02 linux kernel: rcu: Hierarchical SRCU implementation.
feb 15 18:06:02 linux kernel: rcu:         Max phase no-delay instances is 1000.
feb 15 18:06:02 linux kernel: Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
feb 15 18:06:02 linux kernel: MCE: In-kernel MCE decoding enabled.
feb 15 18:06:02 linux kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
feb 15 18:06:02 linux kernel: smp: Bringing up secondary CPUs ...
feb 15 18:06:02 linux kernel: smpboot: x86: Booting SMP configuration:
feb 15 18:06:02 linux kernel: .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
feb 15 18:06:02 linux kernel: Spectre V2 : Update user space SMT mitigation: STIBP always-on
feb 15 18:06:02 linux kernel: smp: Brought up 1 node, 12 CPUs
feb 15 18:06:02 linux kernel: smpboot: Total of 12 processors activated (93464.00 BogoMIPS)
feb 15 18:06:02 linux kernel: Memory: 7422124K/7731344K available (18432K kernel code, 2672K rwdata, 14320K rodata, 4272K init, 4016K bss, 295144K reserved, 0K cma-reserved)
feb 15 18:06:02 linux kernel: devtmpfs: initialized
feb 15 18:06:02 linux kernel: x86/mm: Memory block size: 128MB
feb 15 18:06:02 linux kernel: ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes)
feb 15 18:06:02 linux kernel: ACPI: PM: Registering ACPI NVS region [mem 0x9a543000-0x9bff5fff] (27996160 bytes)
feb 15 18:06:02 linux kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
feb 15 18:06:02 linux kernel: futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
feb 15 18:06:02 linux kernel: pinctrl core: initialized pinctrl subsystem
feb 15 18:06:02 linux kernel: PM: RTC time: 17:05:56, date: 2026-02-15
feb 15 18:06:02 linux kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
feb 15 18:06:02 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
feb 15 18:06:02 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
feb 15 18:06:02 linux kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
feb 15 18:06:02 linux kernel: audit: initializing netlink subsys (disabled)
feb 15 18:06:02 linux kernel: audit: type=2000 audit(1771175156.000:1): state=initialized audit_enabled=0 res=1
feb 15 18:06:02 linux kernel: thermal_sys: Registered thermal governor 'fair_share'
feb 15 18:06:02 linux kernel: thermal_sys: Registered thermal governor 'bang_bang'
feb 15 18:06:02 linux kernel: thermal_sys: Registered thermal governor 'step_wise'
feb 15 18:06:02 linux kernel: thermal_sys: Registered thermal governor 'user_space'
feb 15 18:06:02 linux kernel: thermal_sys: Registered thermal governor 'power_allocator'
feb 15 18:06:02 linux kernel: cpuidle: using governor ladder
feb 15 18:06:02 linux kernel: cpuidle: using governor menu
feb 15 18:06:02 linux kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
feb 15 18:06:02 linux kernel: PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
feb 15 18:06:02 linux kernel: PCI: Using configuration type 1 for base access
feb 15 18:06:02 linux kernel: mtrr: your CPUs had inconsistent variable MTRR settings
feb 15 18:06:02 linux kernel: mtrr: probably your BIOS does not setup all CPUs.
feb 15 18:06:02 linux kernel: mtrr: corrected configuration.
feb 15 18:06:02 linux kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
feb 15 18:06:02 linux kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
feb 15 18:06:02 linux kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
feb 15 18:06:02 linux kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
feb 15 18:06:02 linux kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
feb 15 18:06:02 linux kernel: ACPI: Added _OSI(Module Device)
feb 15 18:06:02 linux kernel: ACPI: Added _OSI(Processor Device)
feb 15 18:06:02 linux kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
feb 15 18:06:02 linux kernel: ACPI: Added _OSI(Processor Aggregator Device)
feb 15 18:06:02 linux kernel: ACPI: 12 ACPI AML tables successfully acquired and loaded
feb 15 18:06:02 linux kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
feb 15 18:06:02 linux kernel: ACPI: Interpreter enabled
feb 15 18:06:02 linux kernel: ACPI: PM: (supports S0 S3 S4 S5)
feb 15 18:06:02 linux kernel: ACPI: Using IOAPIC for interrupt routing
feb 15 18:06:02 linux kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
feb 15 18:06:02 linux kernel: PCI: Using E820 reservations for host bridge windows
feb 15 18:06:02 linux kernel: ACPI: Enabled 7 GPEs in block 00 to 1F
feb 15 18:06:02 linux kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
feb 15 18:06:02 linux kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
feb 15 18:06:02 linux kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
feb 15 18:06:02 linux kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
feb 15 18:06:02 linux kernel: acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
feb 15 18:06:02 linux kernel: PCI host bridge to bus 0000:00
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
feb 15 18:06:02 linux kernel: pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1:   bridge window [mem 0xfce00000-0xfcffffff]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xfca00000-0xfcdfffff]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
feb 15 18:06:02 linux kernel: pci 0000:01:00.0: [1022:43ec] type 00 class 0x0c0330 PCIe Legacy Endpoint
feb 15 18:06:02 linux kernel: pci 0000:01:00.0: BAR 0 [mem 0xfcfa0000-0xfcfa7fff 64bit]
feb 15 18:06:02 linux kernel: pci 0000:01:00.0: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:01:00.0: PME# supported from D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:01:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
feb 15 18:06:02 linux kernel: pci 0000:01:00.1: BAR 5 [mem 0xfcf80000-0xfcf9ffff]
feb 15 18:06:02 linux kernel: pci 0000:01:00.1: ROM [mem 0xfcf00000-0xfcf7ffff pref]
feb 15 18:06:02 linux kernel: pci 0000:01:00.1: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:01:00.1: PME# supported from D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: PME# supported from D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: PME# supported from D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: BAR 0 [io  0xf000-0xf0ff]
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: BAR 2 [mem 0xfce04000-0xfce04fff 64bit]
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: BAR 4 [mem 0xfce00000-0xfce03fff 64bit]
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: supports D1 D2
feb 15 18:06:02 linux kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: [1002:1638] type 00 class 0x030000 PCIe Legacy Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: BAR 0 [mem 0xd0000000-0xdfffffff 64bit pref]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: BAR 2 [mem 0xe0000000-0xe01fffff 64bit pref]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: BAR 4 [io  0xe000-0xe0ff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: BAR 5 [mem 0xfcd00000-0xfcd7ffff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
feb 15 18:06:02 linux kernel: pci 0000:04:00.1: [1002:1637] type 00 class 0x040300 PCIe Legacy Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.1: BAR 0 [mem 0xfcd88000-0xfcd8bfff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.1: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:04:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.2: BAR 2 [mem 0xfcc00000-0xfccfffff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.2: BAR 5 [mem 0xfcd8c000-0xfcd8dfff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.2: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.3: BAR 0 [mem 0xfcb00000-0xfcbfffff 64bit]
feb 15 18:06:02 linux kernel: pci 0000:04:00.3: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:04:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.4: BAR 0 [mem 0xfca00000-0xfcafffff 64bit]
feb 15 18:06:02 linux kernel: pci 0000:04:00.4: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.4: PME# supported from D0 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
feb 15 18:06:02 linux kernel: pci 0000:04:00.6: BAR 0 [mem 0xfcd80000-0xfcd87fff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.6: enabling Extended Tags
feb 15 18:06:02 linux kernel: pci 0000:04:00.6: PME# supported from D0 D3hot D3cold
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 0
feb 15 18:06:02 linux kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 0
feb 15 18:06:02 linux kernel: iommu: Default domain type: Translated
feb 15 18:06:02 linux kernel: iommu: DMA domain TLB invalidation policy: lazy mode
feb 15 18:06:02 linux kernel: SCSI subsystem initialized
feb 15 18:06:02 linux kernel: libata version 3.00 loaded.
feb 15 18:06:02 linux kernel: ACPI: bus type USB registered
feb 15 18:06:02 linux kernel: usbcore: registered new interface driver usbfs
feb 15 18:06:02 linux kernel: usbcore: registered new interface driver hub
feb 15 18:06:02 linux kernel: usbcore: registered new device driver usb
feb 15 18:06:02 linux kernel: EDAC MC: Ver: 3.0.0
feb 15 18:06:02 linux kernel: NetLabel: Initializing
feb 15 18:06:02 linux kernel: NetLabel:  domain hash size = 128
feb 15 18:06:02 linux kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
feb 15 18:06:02 linux kernel: NetLabel:  unlabeled traffic allowed by default
feb 15 18:06:02 linux kernel: mctp: management component transport protocol core
feb 15 18:06:02 linux kernel: NET: Registered PF_MCTP protocol family
feb 15 18:06:02 linux kernel: PCI: Using ACPI for IRQ routing
feb 15 18:06:02 linux kernel: PCI: pci_cache_line_size set to 64 bytes
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x98db7000-0x9bffffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
feb 15 18:06:02 linux kernel: e820: reserve RAM buffer [mem 0x23e300000-0x23fffffff]
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: vgaarb: setting as boot VGA device
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: vgaarb: bridge control possible
feb 15 18:06:02 linux kernel: pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
feb 15 18:06:02 linux kernel: vgaarb: loaded
feb 15 18:06:02 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
feb 15 18:06:02 linux kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
feb 15 18:06:02 linux kernel: clocksource: Switched to clocksource tsc-early
feb 15 18:06:02 linux kernel: VFS: Disk quotas dquot_6.6.0
feb 15 18:06:02 linux kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
feb 15 18:06:02 linux kernel: pnp: PnP ACPI init
feb 15 18:06:02 linux kernel: system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
feb 15 18:06:02 linux kernel: system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
feb 15 18:06:02 linux kernel: system 00:02: [mem 0xa0000000-0xbfffffff window] has been reserved
feb 15 18:06:02 linux kernel: system 00:04: [io  0x0280-0x028f] has been reserved
feb 15 18:06:02 linux kernel: system 00:04: [io  0x0290-0x029f] has been reserved
feb 15 18:06:02 linux kernel: system 00:04: [io  0x02a0-0x02af] has been reserved
feb 15 18:06:02 linux kernel: system 00:04: [io  0x02b0-0x02bf] has been reserved
feb 15 18:06:02 linux kernel: pnp 00:05: [dma 0 disabled]
feb 15 18:06:02 linux kernel: system 00:07: [io  0x04d0-0x04d1] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x040b] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x04d6] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c00-0x0c01] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c14] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c50-0x0c51] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c52] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c6c] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0c6f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0cd8-0x0cdf] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0800-0x089f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0b00-0x0b0f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0b20-0x0b3f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0900-0x090f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [io  0x0910-0x091f] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfec01000-0xfec01fff] could not be reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfedc0000-0xfedc0fff] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfed80000-0xfed8ffff] could not be reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
feb 15 18:06:02 linux kernel: system 00:07: [mem 0xff000000-0xffffffff] has been reserved
feb 15 18:06:02 linux kernel: pnp: PnP ACPI: found 8 devices
feb 15 18:06:02 linux kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
feb 15 18:06:02 linux kernel: NET: Registered PF_INET protocol family
feb 15 18:06:02 linux kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
feb 15 18:06:02 linux kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
feb 15 18:06:02 linux kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
feb 15 18:06:02 linux kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
feb 15 18:06:02 linux kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
feb 15 18:06:02 linux kernel: TCP: Hash tables configured (established 65536 bind 65536)
feb 15 18:06:02 linux kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
feb 15 18:06:02 linux kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
feb 15 18:06:02 linux kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
feb 15 18:06:02 linux kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
feb 15 18:06:02 linux kernel: NET: Registered PF_XDP protocol family
feb 15 18:06:02 linux kernel: pci 0000:02:03.0: PCI bridge to [bus 03]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:02:03.0:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2: PCI bridge to [bus 02-03]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:01:00.2:   bridge window [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1: PCI bridge to [bus 01-03]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1:   bridge window [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci 0000:00:02.1:   bridge window [mem 0xfce00000-0xfcffffff]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1: PCI bridge to [bus 04]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xfca00000-0xfcdfffff]
feb 15 18:06:02 linux kernel: pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
feb 15 18:06:02 linux kernel: pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcffffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:02: resource 1 [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
feb 15 18:06:02 linux kernel: pci_bus 0000:04: resource 1 [mem 0xfca00000-0xfcdfffff]
feb 15 18:06:02 linux kernel: pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
feb 15 18:06:02 linux kernel: pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
feb 15 18:06:02 linux kernel: pci 0000:04:00.3: extending delay after power-on from D3hot to 20 msec
feb 15 18:06:02 linux kernel: pci 0000:04:00.4: extending delay after power-on from D3hot to 20 msec
feb 15 18:06:02 linux kernel: PCI: CLS 64 bytes, default 64
feb 15 18:06:02 linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
feb 15 18:06:02 linux kernel: software IO TLB: mapped [mem 0x0000000094db7000-0x0000000098db7000] (64MB)
feb 15 18:06:02 linux kernel: LVT offset 0 assigned for vector 0x400
feb 15 18:06:02 linux kernel: Trying to unpack rootfs image as initramfs...
feb 15 18:06:02 linux kernel: perf: AMD IBS detected (0x000003ff)
feb 15 18:06:02 linux kernel: Initialise system trusted keyrings
feb 15 18:06:02 linux kernel: Key type blacklist registered
feb 15 18:06:02 linux kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
feb 15 18:06:02 linux kernel: fuse: init (API version 7.41)
feb 15 18:06:02 linux kernel: integrity: Platform Keyring initialized
feb 15 18:06:02 linux kernel: integrity: Machine keyring initialized
feb 15 18:06:02 linux kernel: Key type asymmetric registered
feb 15 18:06:02 linux kernel: Asymmetric key parser 'x509' registered
feb 15 18:06:02 linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
feb 15 18:06:02 linux kernel: io scheduler mq-deadline registered
feb 15 18:06:02 linux kernel: io scheduler kyber registered
feb 15 18:06:02 linux kernel: io scheduler bfq registered
feb 15 18:06:02 linux kernel: ledtrig-cpu: registered to indicate activity on CPUs
feb 15 18:06:02 linux kernel: pcieport 0000:00:02.1: PME: Signaling with IRQ 25
feb 15 18:06:02 linux kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 26
feb 15 18:06:02 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
feb 15 18:06:02 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
feb 15 18:06:02 linux kernel: ACPI: button: Power Button [PWRB]
feb 15 18:06:02 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
feb 15 18:06:02 linux kernel: ACPI: button: Power Button [PWRF]
feb 15 18:06:02 linux kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1098
feb 15 18:06:02 linux kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
feb 15 18:06:02 linux kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
feb 15 18:06:02 linux kernel: Non-volatile memory driver v1.3
feb 15 18:06:02 linux kernel: Linux agpgart interface v0.103
feb 15 18:06:02 linux kernel: ACPI: bus type drm_connector registered
feb 15 18:06:02 linux kernel: Freeing initrd memory: 37984K
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: version 3.0
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: 4/6 ports implemented (port mask 0x33)
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
feb 15 18:06:02 linux kernel: scsi host0: ahci
feb 15 18:06:02 linux kernel: scsi host1: ahci
feb 15 18:06:02 linux kernel: scsi host2: ahci
feb 15 18:06:02 linux kernel: scsi host3: ahci
feb 15 18:06:02 linux kernel: scsi host4: ahci
feb 15 18:06:02 linux kernel: scsi host5: ahci
feb 15 18:06:02 linux kernel: ata1: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80100 irq 31 lpm-pol 3
feb 15 18:06:02 linux kernel: ata2: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80180 irq 31 lpm-pol 3
feb 15 18:06:02 linux kernel: ata3: DUMMY
feb 15 18:06:02 linux kernel: ata4: DUMMY
feb 15 18:06:02 linux kernel: ata5: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80300 irq 31 lpm-pol 3
feb 15 18:06:02 linux kernel: ata6: SATA max UDMA/133 abar m131072@0xfcf80000 port 0xfcf80380 irq 31 lpm-pol 3
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
feb 15 18:06:02 linux kernel: xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 18:06:02 linux kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb1: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb1: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb1: SerialNumber: 0000:01:00.0
feb 15 18:06:02 linux kernel: hub 1-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 1-0:1.0: 9 ports detected
feb 15 18:06:02 linux kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 18:06:02 linux kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb2: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb2: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb2: SerialNumber: 0000:01:00.0
feb 15 18:06:02 linux kernel: hub 2-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 2-0:1.0: 3 ports detected
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 3
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 4
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 18:06:02 linux kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb3: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb3: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb3: SerialNumber: 0000:04:00.3
feb 15 18:06:02 linux kernel: hub 3-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 3-0:1.0: 4 ports detected
feb 15 18:06:02 linux kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 18:06:02 linux kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb4: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb4: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb4: SerialNumber: 0000:04:00.3
feb 15 18:06:02 linux kernel: hub 4-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 4-0:1.0: 2 ports detected
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 5
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: xHCI Host Controller
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 6
feb 15 18:06:02 linux kernel: xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed
feb 15 18:06:02 linux kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb5: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb5: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb5: SerialNumber: 0000:04:00.4
feb 15 18:06:02 linux kernel: hub 5-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 5-0:1.0: 4 ports detected
feb 15 18:06:02 linux kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
feb 15 18:06:02 linux kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
feb 15 18:06:02 linux kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
feb 15 18:06:02 linux kernel: usb usb6: Product: xHCI Host Controller
feb 15 18:06:02 linux kernel: usb usb6: Manufacturer: Linux 6.12.15-1-lts xhci-hcd
feb 15 18:06:02 linux kernel: usb usb6: SerialNumber: 0000:04:00.4
feb 15 18:06:02 linux kernel: hub 6-0:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 6-0:1.0: 2 ports detected
feb 15 18:06:02 linux kernel: usbcore: registered new interface driver usbserial_generic
feb 15 18:06:02 linux kernel: usbserial: USB Serial support registered for generic
feb 15 18:06:02 linux kernel: rtc_cmos 00:03: RTC can wake from S4
feb 15 18:06:02 linux kernel: rtc_cmos 00:03: registered as rtc0
feb 15 18:06:02 linux kernel: rtc_cmos 00:03: setting system clock to 2026-02-15T17:05:56 UTC (1771175156)
feb 15 18:06:02 linux kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
feb 15 18:06:02 linux kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
feb 15 18:06:02 linux kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
feb 15 18:06:02 linux kernel: fbcon: Deferring console take-over
feb 15 18:06:02 linux kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
feb 15 18:06:02 linux kernel: hid: raw HID events driver (C) Jiri Kosina
feb 15 18:06:02 linux kernel: drop_monitor: Initializing network drop monitor service
feb 15 18:06:02 linux kernel: NET: Registered PF_INET6 protocol family
feb 15 18:06:02 linux kernel: Segment Routing with IPv6
feb 15 18:06:02 linux kernel: RPL Segment Routing with IPv6
feb 15 18:06:02 linux kernel: In-situ OAM (IOAM) with IPv6
feb 15 18:06:02 linux kernel: NET: Registered PF_PACKET protocol family
feb 15 18:06:02 linux kernel: microcode: Current revision: 0x0a500012
feb 15 18:06:02 linux kernel: microcode: Updated early from: 0x0a50000c
feb 15 18:06:02 linux kernel: resctrl: L3 allocation detected
feb 15 18:06:02 linux kernel: resctrl: MB allocation detected
feb 15 18:06:02 linux kernel: resctrl: L3 monitoring detected
feb 15 18:06:02 linux kernel: IPI shorthand broadcast: enabled
feb 15 18:06:02 linux kernel: sched_clock: Marking stable (449315344, 254134)->(511775055, -62205577)
feb 15 18:06:02 linux kernel: registered taskstats version 1
feb 15 18:06:02 linux kernel: Loading compiled-in X.509 certificates
feb 15 18:06:02 linux kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 65daac0adbaba3595322177a4f5eace6f4d84492'
feb 15 18:06:02 linux kernel: Demotion targets for Node 0: null
feb 15 18:06:02 linux kernel: Key type .fscrypt registered
feb 15 18:06:02 linux kernel: Key type fscrypt-provisioning registered
feb 15 18:06:02 linux kernel: PM:   Magic number: 14:418:87
feb 15 18:06:02 linux kernel: button LNXPWRBN:00: hash matches
feb 15 18:06:02 linux kernel: RAS: Correctable Errors collector initialized.
feb 15 18:06:02 linux kernel: clk: Disabling unused clocks
feb 15 18:06:02 linux kernel: PM: genpd: Disabling unused power domains
feb 15 18:06:02 linux kernel: usb 1-4: new low-speed USB device number 2 using xhci_hcd
feb 15 18:06:02 linux kernel: usb 5-1: new full-speed USB device number 2 using xhci_hcd
feb 15 18:06:02 linux kernel: usb 5-1: New USB device found, idVendor=045e, idProduct=0288, bcdDevice= 1.21
feb 15 18:06:02 linux kernel: usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
feb 15 18:06:02 linux kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
feb 15 18:06:02 linux kernel: ata1.00: Model 'CT120BX300SSD1', rev 'M2CR010', applying quirks: nolpm
feb 15 18:06:02 linux kernel: ata1.00: LPM support broken, forcing max_power
feb 15 18:06:02 linux kernel: ata1.00: ATA-9: CT120BX300SSD1, M2CR010, max UDMA/133
feb 15 18:06:02 linux kernel: ata1.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 32), AA
feb 15 18:06:02 linux kernel: ata1.00: Features: Dev-Sleep
feb 15 18:06:02 linux kernel: ata1.00: LPM support broken, forcing max_power
feb 15 18:06:02 linux kernel: ata1.00: configured for UDMA/133
feb 15 18:06:02 linux kernel: ahci 0000:01:00.1: port does not support device sleep
feb 15 18:06:02 linux kernel: scsi 0:0:0:0: Direct-Access     ATA      CT120BX300SSD1   010  PQ: 0 ANSI: 5
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] Write Protect is off
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
feb 15 18:06:02 linux kernel:  sda: sda1 sda2 sda3
feb 15 18:06:02 linux kernel: sd 0:0:0:0: [sda] Attached SCSI disk
feb 15 18:06:02 linux kernel: hub 5-1:1.0: USB hub found
feb 15 18:06:02 linux kernel: hub 5-1:1.0: 3 ports detected
feb 15 18:06:02 linux kernel: usb 1-4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
feb 15 18:06:02 linux kernel: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
feb 15 18:06:02 linux kernel: usb 1-4: Product: USB Optical Mouse
feb 15 18:06:02 linux kernel: usb 1-4: Manufacturer: Logitech
feb 15 18:06:02 linux kernel: usb 5-2: new low-speed USB device number 3 using xhci_hcd
feb 15 18:06:02 linux kernel: usb 5-2: New USB device found, idVendor=0461, idProduct=3f41, bcdDevice= 9.19
feb 15 18:06:02 linux kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
feb 15 18:06:02 linux kernel: usb 5-2: Product: HP Wired Desktop 320K Keyboard
feb 15 18:06:02 linux kernel: usb 5-2: Manufacturer: Primax
feb 15 18:06:02 linux kernel: ata2: SATA link down (SStatus 0 SControl 300)
feb 15 18:06:02 linux kernel: usb 5-1.1: new full-speed USB device number 4 using xhci_hcd
feb 15 18:06:02 linux kernel: tsc: Refined TSC clocksource calibration: 3892.669 MHz
feb 15 18:06:02 linux kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70389a1c830, max_idle_ns: 881590702409 ns
feb 15 18:06:02 linux kernel: clocksource: Switched to clocksource tsc
feb 15 18:06:02 linux kernel: usb 5-1.1: New USB device found, idVendor=045e, idProduct=0289, bcdDevice= 1.21
feb 15 18:06:02 linux kernel: usb 5-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
feb 15 18:06:02 linux kernel: ata5: SATA link down (SStatus 0 SControl 330)
feb 15 18:06:02 linux kernel: ata6: SATA link down (SStatus 0 SControl 330)
feb 15 18:06:02 linux kernel: Freeing unused decrypted memory: 2028K
feb 15 18:06:02 linux kernel: Freeing unused kernel image (initmem) memory: 4272K
feb 15 18:06:02 linux kernel: Write protecting the kernel read-only data: 32768k
feb 15 18:06:02 linux kernel: Freeing unused kernel image (rodata/data gap) memory: 16K
feb 15 18:06:02 linux kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
feb 15 18:06:02 linux kernel: rodata_test: all tests were successful
feb 15 18:06:02 linux kernel: Run /init as init process
feb 15 18:06:02 linux kernel:   with arguments:
feb 15 18:06:02 linux kernel:     /init
feb 15 18:06:02 linux kernel:   with environment:
feb 15 18:06:02 linux kernel:     HOME=/
feb 15 18:06:02 linux kernel:     TERM=linux
feb 15 18:06:02 linux kernel:     BOOT_IMAGE=/boot/vmlinuz-linux-lts
feb 15 18:06:02 linux kernel: fbcon: Taking over console
feb 15 18:06:02 linux kernel: Console: switching to colour frame buffer device 240x67
feb 15 18:06:02 linux kernel: ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
feb 15 18:06:02 linux kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input2
feb 15 18:06:02 linux kernel: [drm] amdgpu kernel modesetting enabled.
feb 15 18:06:02 linux kernel: amdgpu: Virtual CRAT table created for CPU
feb 15 18:06:02 linux kernel: amdgpu: Topology: Add CPU node
feb 15 18:06:02 linux kernel: [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x1002:0x1636 0xC9).
feb 15 18:06:02 linux kernel: [drm] register mmio base: 0xFCD00000
feb 15 18:06:02 linux kernel: [drm] register mmio size: 524288
feb 15 18:06:02 linux kernel: [drm] add ip block number 0 <soc15_common>
feb 15 18:06:02 linux kernel: [drm] add ip block number 1 <gmc_v9_0>
feb 15 18:06:02 linux kernel: [drm] add ip block number 2 <vega10_ih>
feb 15 18:06:02 linux kernel: [drm] add ip block number 3 <psp>
feb 15 18:06:02 linux kernel: [drm] add ip block number 4 <smu>
feb 15 18:06:02 linux kernel: [drm] add ip block number 5 <dm>
feb 15 18:06:02 linux kernel: [drm] add ip block number 6 <gfx_v9_0>
feb 15 18:06:02 linux kernel: [drm] add ip block number 7 <sdma_v4_0>
feb 15 18:06:02 linux kernel: [drm] add ip block number 8 <vcn_v2_0>
feb 15 18:06:02 linux kernel: [drm] add ip block number 9 <jpeg_v2_0>
feb 15 18:06:02 linux kernel: [drm] BIOS signature incorrect 0 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR
feb 15 18:06:02 linux kernel: amdgpu: ATOM BIOS: 13-CEZANNE-019
feb 15 18:06:02 linux kernel: Console: switching to colour dummy device 80x25
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: vgaarb: deactivate vga console
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: MODE2 reset
feb 15 18:06:02 linux kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
feb 15 18:06:02 linux kernel: [drm] Detected VRAM RAM=512M, BAR=512M
feb 15 18:06:02 linux kernel: [drm] RAM width 128bits DDR4
feb 15 18:06:02 linux kernel: [drm] amdgpu: 512M of VRAM memory ready
feb 15 18:06:02 linux kernel: [drm] amdgpu: 3652M of GTT memory ready.
feb 15 18:06:02 linux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
feb 15 18:06:02 linux kernel: [drm] PCIE GART of 1024M enabled.
feb 15 18:06:02 linux kernel: [drm] PTB located at 0x000000F41FC00000
feb 15 18:06:02 linux kernel: [drm] Loading DMUB firmware via PSP: version=0x0101002B
feb 15 18:06:02 linux kernel: [drm] Found VCN firmware Version ENC: 1.24 DEC: 8 VEP: 0 Revision: 3
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: reserve 0x400000 from 0xf41f800000 for PSP TMR
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully!
feb 15 18:06:02 linux kernel: [drm] Display Core v3.2.301 initialized on DCN 2.1
feb 15 18:06:02 linux kernel: [drm] DP-HDMI FRL PCON supported
feb 15 18:06:02 linux kernel: [drm] DMUB hardware initialized: version=0x0101002B
feb 15 18:06:02 linux kernel: [drm] kiq ring mec 2 pipe 1 q 0
feb 15 18:06:02 linux kernel: kfd kfd: amdgpu: Allocated 3969056 bytes on gart
feb 15 18:06:02 linux kernel: kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
feb 15 18:06:02 linux kernel: amdgpu: Virtual CRAT table created for GPU
feb 15 18:06:02 linux kernel: amdgpu: Topology: Add dGPU node [0x1638:0x1002]
feb 15 18:06:02 linux kernel: kfd kfd: amdgpu: added device 1002:1638
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: amdgpu: Runtime PM not available
feb 15 18:06:02 linux kernel: [drm] Initialized amdgpu 3.60.0 for 0000:04:00.0 on minor 1
feb 15 18:06:02 linux kernel: fbcon: amdgpudrmfb (fb0) is primary device
feb 15 18:06:02 linux kernel: [drm] pre_validate_dsc:1596 MST_DSC dsc precompute is not needed
feb 15 18:06:02 linux kernel: Console: switching to colour frame buffer device 240x67
feb 15 18:06:02 linux kernel: amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device
feb 15 18:06:02 linux kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
feb 15 18:06:02 linux kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
feb 15 18:06:02 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
feb 15 18:06:02 linux kernel: usbcore: registered new interface driver usbhid
feb 15 18:06:02 linux kernel: usbhid: USB HID core driver
feb 15 18:06:02 linux kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-4/1-4:1.0/0003:046D:C077.0001/input/input4
feb 15 18:06:02 linux kernel: hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-4/input0
feb 15 18:06:02 linux kernel: input: Primax HP Wired Desktop 320K Keyboard as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.0/0003:0461:3F41.0002/input/input5
feb 15 18:06:02 linux kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
feb 15 18:06:02 linux kernel: hid-generic 0003:0461:3F41.0002: input,hidraw1: USB HID v1.11 Keyboard [Primax HP Wired Desktop 320K Keyboard] on usb-0000:04:00.4-2/input0
feb 15 18:06:02 linux kernel: input: Primax HP Wired Desktop 320K Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.1/0003:0461:3F41.0003/input/input6
feb 15 18:06:02 linux kernel: input: Primax HP Wired Desktop 320K Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-2/5-2:1.1/0003:0461:3F41.0003/input/input7
feb 15 18:06:02 linux kernel: hid-generic 0003:0461:3F41.0003: input,hidraw2: USB HID v1.11 Device [Primax HP Wired Desktop 320K Keyboard] on usb-0000:04:00.4-2/input1
feb 15 18:06:02 linux kernel: EXT4-fs (sda1): mounted filesystem 6873b23b-fe1f-4788-9932-092a6207270e r/w with ordered data mode. Quota mode: none.
feb 15 18:06:02 linux systemd[1]: systemd 259.1-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
feb 15 18:06:02 linux systemd[1]: Detected architecture x86-64.
feb 15 18:06:02 linux systemd[1]: Hostname set to <linux>.
feb 15 18:06:02 linux systemd[1]: bpf-restrict-fs: LSM BPF program attached
feb 15 18:06:02 linux systemd[1]: Queued start job for default target Graphical Interface.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/dirmngr.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/getty.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/gpg-agent.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/gpg-agent-browser.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/gpg-agent-extra.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/gpg-agent-ssh.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/keyboxd.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/modprobe.
feb 15 18:06:02 linux systemd[1]: Created slice Slice /system/systemd-fsck.
feb 15 18:06:02 linux systemd[1]: Created slice User and Session Slice.
feb 15 18:06:02 linux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
feb 15 18:06:02 linux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
feb 15 18:06:02 linux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
feb 15 18:06:02 linux systemd[1]: Expecting device /dev/disk/by-uuid/016650e9-4abc-4b37-89e4-6daeec3d40b3...
feb 15 18:06:02 linux systemd[1]: Expecting device /dev/disk/by-uuid/E0E8-2FDD...
feb 15 18:06:02 linux systemd[1]: Reached target Local Encrypted Volumes.
feb 15 18:06:02 linux systemd[1]: Reached target Image Downloads.
feb 15 18:06:02 linux systemd[1]: Reached target Local Integrity Protected Volumes.
feb 15 18:06:02 linux systemd[1]: Reached target Path Units.
feb 15 18:06:02 linux systemd[1]: Reached target Remote File Systems.
feb 15 18:06:02 linux systemd[1]: Reached target Slice Units.
feb 15 18:06:02 linux systemd[1]: Reached target Swaps.
feb 15 18:06:02 linux systemd[1]: Reached target Local Verity Protected Volumes.
feb 15 18:06:02 linux systemd[1]: Listening on Device-mapper event daemon FIFOs.
feb 15 18:06:02 linux systemd[1]: Listening on LVM2 poll daemon socket.
feb 15 18:06:02 linux systemd[1]: Listening on Query the User Interactively for a Password.
feb 15 18:06:02 linux systemd[1]: Listening on Process Core Dump Socket.
feb 15 18:06:02 linux systemd[1]: Listening on Credential Encryption/Decryption.
feb 15 18:06:02 linux systemd[1]: Listening on Factory Reset Management.
feb 15 18:06:02 linux systemd[1]: Listening on Journal Socket (/dev/log).
feb 15 18:06:02 linux systemd[1]: Listening on Journal Sockets.
feb 15 18:06:02 linux systemd[1]: Listening on Console Output Muting Service Socket.
feb 15 18:06:02 linux systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
feb 15 18:06:02 linux systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: Listening on Disk Repartitioning Service Socket.
feb 15 18:06:02 linux systemd[1]: Listening on udev Control Socket.
feb 15 18:06:02 linux systemd[1]: Listening on udev Kernel Socket.
feb 15 18:06:02 linux systemd[1]: Listening on udev Varlink Socket.
feb 15 18:06:02 linux systemd[1]: Mounting Huge Pages File System...
feb 15 18:06:02 linux systemd[1]: Mounting POSIX Message Queue File System...
feb 15 18:06:02 linux systemd[1]: Mounting Kernel Debug File System...
feb 15 18:06:02 linux systemd[1]: Mounting Kernel Trace File System...
feb 15 18:06:02 linux systemd[1]: Starting Create List of Static Device Nodes...
feb 15 18:06:02 linux systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
feb 15 18:06:02 linux systemd[1]: Mounting Kernel Configuration File System...
feb 15 18:06:02 linux systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
feb 15 18:06:02 linux systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
feb 15 18:06:02 linux systemd[1]: Mounting FUSE Control File System...
feb 15 18:06:02 linux systemd[1]: File System Check on Root Device skipped, unmet condition check ConditionPathIsReadWrite=!/
feb 15 18:06:02 linux systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
feb 15 18:06:02 linux systemd[1]: Starting Journal Service...
feb 15 18:06:02 linux systemd[1]: Starting Load Kernel Modules...
feb 15 18:06:02 linux systemd[1]: TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: TPM NvPCR Product ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: Starting Remount Root and Kernel File Systems...
feb 15 18:06:02 linux systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: Starting Load udev Rules from Credentials...
feb 15 18:06:02 linux systemd[1]: Starting Coldplug All udev Devices...
feb 15 18:06:02 linux systemd[1]: Mounted Huge Pages File System.
feb 15 18:06:02 linux systemd[1]: Mounted POSIX Message Queue File System.
feb 15 18:06:02 linux systemd[1]: Mounted Kernel Debug File System.
feb 15 18:06:02 linux systemd[1]: Mounted Kernel Trace File System.
feb 15 18:06:02 linux systemd[1]: Finished Create List of Static Device Nodes.
feb 15 18:06:02 linux systemd[1]: Mounted Kernel Configuration File System.
feb 15 18:06:02 linux systemd[1]: Mounted FUSE Control File System.
feb 15 18:06:02 linux systemd-journald[351]: Collecting audit messages is disabled.
feb 15 18:06:02 linux systemd[1]: Finished Load udev Rules from Credentials.
feb 15 18:06:02 linux systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
feb 15 18:06:02 linux kernel: i2c_dev: i2c /dev entries driver
feb 15 18:06:02 linux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
feb 15 18:06:02 linux systemd[1]: Finished Load Kernel Modules.
feb 15 18:06:02 linux systemd[1]: Starting Apply Kernel Variables...
feb 15 18:06:02 linux systemd[1]: Finished Apply Kernel Variables.
feb 15 18:06:02 linux systemd[1]: Starting CLI Netfilter Manager...
feb 15 18:06:02 linux systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
feb 15 18:06:02 linux systemd[1]: Finished CLI Netfilter Manager.
feb 15 18:06:02 linux kernel: EXT4-fs (sda1): re-mounted 6873b23b-fe1f-4788-9932-092a6207270e r/w. Quota mode: none.
feb 15 18:06:02 linux systemd[1]: Finished Remount Root and Kernel File Systems.
feb 15 18:06:02 linux systemd[1]: Rebuild Hardware Database skipped, unmet condition check ConditionNeedsUpdate=/etc
feb 15 18:06:02 linux systemd[1]: Starting Load/Save OS Random Seed...
feb 15 18:06:02 linux systemd[1]: Create System Users skipped, no trigger condition checks were met.
feb 15 18:06:02 linux systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...
feb 15 18:06:02 linux systemd[1]: Starting Create Static Device Nodes in /dev...
feb 15 18:06:02 linux systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: TPM PCR NvPCR Initialization Separator skipped, unmet condition check ConditionSecurity=measured-uki
feb 15 18:06:02 linux systemd[1]: Started Journal Service.
feb 15 18:06:02 linux systemd-journald[351]: Received client request to flush runtime journal.
feb 15 18:06:02 linux systemd-journald[351]: File /var/log/journal/e24708286a38441f96bca3ba4efeb60b/system.journal corrupted or uncleanly shut down, renaming and replacing.
feb 15 18:06:02 linux kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
feb 15 18:06:02 linux kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
feb 15 18:06:02 linux kernel: ccp 0000:04:00.2: ccp: unable to access the device: you might be running a broken BIOS.
feb 15 18:06:02 linux kernel: ccp 0000:04:00.2: tee enabled
feb 15 18:06:02 linux kernel: ccp 0000:04:00.2: psp enabled
feb 15 18:06:02 linux kernel: i2c i2c-4: Successfully instantiated SPD at 0x50
feb 15 18:06:02 linux kernel: i2c i2c-4: Successfully instantiated SPD at 0x51
feb 15 18:06:02 linux kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
feb 15 18:06:02 linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
feb 15 18:06:02 linux kernel: mousedev: PS/2 mouse device common for all mice
feb 15 18:06:02 linux kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
feb 15 18:06:02 linux kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
feb 15 18:06:02 linux kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
feb 15 18:06:02 linux kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
feb 15 18:06:02 linux kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
feb 15 18:06:02 linux kernel: cryptd: max_cpu_qlen set to 1000
feb 15 18:06:02 linux kernel: input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb5/5-1/5-1.1/5-1.1:1.0/input/input9
feb 15 18:06:02 linux kernel: usbcore: registered new interface driver xpad
feb 15 18:06:02 linux kernel: AES CTR mode by8 optimization enabled
feb 15 18:06:02 linux kernel: r8169 0000:03:00.0 eth0: RTL8168h/8111h, a8:a1:59:ef:d6:59, XID 541, IRQ 60
feb 15 18:06:02 linux kernel: r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
feb 15 18:06:02 linux kernel: ee1004 4-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
feb 15 18:06:02 linux kernel: ee1004 4-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
feb 15 18:06:02 linux kernel: snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
feb 15 18:06:02 linux kernel: snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
feb 15 18:06:02 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input10
feb 15 18:06:02 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input11
feb 15 18:06:02 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input12
feb 15 18:06:02 linux kernel: input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input13
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
feb 15 18:06:02 linux kernel: snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
feb 15 18:06:02 linux kernel: kvm_amd: TSC scaling supported
feb 15 18:06:02 linux kernel: kvm_amd: Nested Virtualization enabled
feb 15 18:06:02 linux kernel: kvm_amd: Nested Paging enabled
feb 15 18:06:02 linux kernel: kvm_amd: LBR virtualization supported
feb 15 18:06:02 linux kernel: kvm_amd: Virtual VMLOAD VMSAVE supported
feb 15 18:06:02 linux kernel: kvm_amd: Virtual GIF supported
feb 15 18:06:02 linux kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input14
feb 15 18:06:02 linux kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input15
feb 15 18:06:02 linux kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input16
feb 15 18:06:02 linux kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input17
feb 15 18:06:02 linux kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input18
feb 15 18:06:02 linux kernel: intel_rapl_common: Found RAPL domain package
feb 15 18:06:02 linux kernel: intel_rapl_common: Found RAPL domain core
feb 15 18:06:02 linux kernel: amd_atl: AMD Address Translation Library initialized
feb 15 18:06:03 linux kernel: EXT4-fs (sda2): mounted filesystem 016650e9-4abc-4b37-89e4-6daeec3d40b3 r/w with ordered data mode. Quota mode: none.
feb 15 18:06:03 linux kernel: nct6775: Found NCT6793D or compatible chip at 0x2e:0x290
feb 15 18:06:03 linux kernel: Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
feb 15 18:06:03 linux kernel: r8169 0000:03:00.0 eth0: Link is Down
feb 15 18:06:05 linux kernel: r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
feb 15 18:06:10 linux systemd-journald[351]: File /var/log/journal/e24708286a38441f96bca3ba4efeb60b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.

Do ssh or https://wiki.archlinux.org/title/Keyboa … el_(SysRq) still work (nb. you've to explicitly enable the latter first and you want to run sysrq + REISUB and give is some seconds for each stage)

yes, with Alt+SysRq+B i can reset

Last edited by quellen (2026-02-17 09:44:14)


sorry for my bad english

Offline

#7 2026-02-15 17:16:01

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

REISUB - the S and the U are especially useful because they'll allow the journal to be written to disk, maybe preserving what's wrong.

sysrq + v will enforce a framebuffer console, does that work as well?

Offline

#8 2026-02-15 19:07:14

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

sysrq + v will enforce a framebuffer console, does that work as well?

if i press Alt+sysrq+v nothing happens.
I also tried downgrading xorg-server, but it didn't fix the issue. I tried this approach because the bug only manifests when a user is logged in and running X. The issue is absent when no users are logged in.

AI suggested a BIOS update as a potential fix. Is this a reliable suggestion?
I have an A520M-HVS motherboard running BIOS version 2.10 from 2022:
https://www.asrock.com/mb/AMD/A520M-HVS … t.asp#BIOS


sorry for my bad english

Offline

#9 2026-02-15 19:16:03

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

Enabling a display manager (I’ve tested lxdm) resolves the issue, but I really dislike using DMs. Is there another workaround?


sorry for my bad english

Offline

#10 2026-02-15 21:08:26

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

bug only manifests when a user is logged in and running X

Fits the other threads - most likely one of the input devices - remove everything not strictly necessary and substitute any fancy g4m0rz keyboard/mouse w/ $5 office supply stuff.
If that prevents the issue, start re-adding devices until things break.

From what I can tell this is caused by some systemd update (udev related)

Offline

#11 2026-02-16 09:39:15

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

bug only manifests when a user is logged in and running X

Fits the other threads - most likely one of the input devices - remove everything not strictly necessary and substitute any fancy g4m0rz keyboard/mouse w/ $5 office supply stuff.
If that prevents the issue, start re-adding devices until things break.

From what I can tell this is caused by some systemd update (udev related)

I disconnected ALL usb peripherals directly from the motherboard and left only an old PS/2 keyboard connected. The problem persists. I also tried disconnecting that and plugging in a different USB keyboard, but it didn't help.

I also tried downgrading systemd (259-1) and using various kernel parameters (amdgpu.dc=1 video=efifb:off console=tty1 processor.max_cstate=1 amdgpu.dc=0 amdgpu.fbdev=0), but it was useless.
What else can I try? I don't want to use a DM

Last edited by quellen (2026-02-16 09:43:39)


sorry for my bad english

Offline

#12 2026-02-16 10:23:56

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

What else can I try? I don't want to use a DM

How do you otherwise run the session, startx? xinit?
Please post your xinitrc and xserverrc hmm

Offline

#13 2026-02-16 10:39:47

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

What else can I try? I don't want to use a DM

How do you otherwise run the session, startx? xinit?
Please post your xinitrc and xserverrc :/

with xinirc:

$ cat ~/.xinitrc 
GTK_IM_MODULE=fcitx5
QT_IM_MODULE=fcitx5
XMODIFIERS=@im=fcitx5
SDL_IM_MODULE=fcitx5
fcitx5 -d --ui none &
blugon &
openbox-session
$ cat .bash_profile 
#
# ~/.bash_profile
#

[[ -f ~/.bashrc ]] && . ~/.bashrc

export EDITOR=nano

if [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]]; then
    exec startx
fi
$ cat .bashrc 
#
# ~/.bashrc
#

# If not running interactively, don't do anything
[[ $- != *i* ]] && return

alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
export PATH="${PATH}:/home/topo/.local/bin"
$ cat ~/.config/openbox/autostart
feh --bg-fill /home/topo/mpv-shot0502.jpg
xbindkeys &
QT_QPA_PLATFORMTHEME=qt5ct simplescreenrecorder --start-hidden & # defer everything else
clipit &
lxpanel &
lxterminal &
env QT_IM_MODULE=fcitx GTK_IM_MODULE=fcitx XMODIFIERS=@im=fcitx Telegram -startintray &
lxqt-notificationd &
snotify &
pactl load-module module-virtual-source source_name='Loopback' master=alsa_input.pci-0000_04_00.6.analog-stereo.monitor use_volume_sharing=no &
shutdown -h 01:01 &
sleep 0.25
conky

i have no ~/.xserverrc

$ cat /etc/X11/xinit/xserverrc
#!/bin/sh
exec /usr/bin/X -nolisten tcp "$@"

p.s.
I updated the BIOS to the latest version, but it didn't fix it :|

Last edited by quellen (2026-02-16 12:46:43)


sorry for my bad english

Offline

#14 2026-02-16 14:02:16

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

Fix your xinitrc (last link below, 2nd note on what to include at least) and ifthat's not enough and just a huch:
skip fcitx and close/redirect openbox-session' IO

openbox-session $@ <&-  > /dev/null 2>&1

Offline

#15 2026-02-16 14:26:05

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

Fix your xinitrc (last link below, 2nd note on what to include at least) and ifthat's not enough and just a huch:
skip fcitx and close/redirect openbox-session' IO

openbox-session $@ <&-  > /dev/null 2>&1

I'm not sure I understood how to fix the .xinitrc, but anyway, the problem persists with this one:

$ cat .xinitrc
#!/bin/sh

prefix="/usr"
exec_prefix="${prefix}"
xrdb="xrdb"
xinitdir="/etc/X11/xinit"
xclock="xclock"
xterm="xterm"
twm="twm"
xmodmap="xmodmap"

userresources="$HOME/.Xresources"
usermodmap="$HOME/.Xmodmap"
sysresources="$xinitdir/.Xresources"
sysmodmap="$xinitdir/.Xmodmap"

# merge in defaults and keymaps

if [ -f "$sysresources" ]; then
    if [ -x /usr/bin/cpp ] ; then
        "$xrdb" -merge "$sysresources"
    else
        "$xrdb" -nocpp -merge "$sysresources"
    fi
fi

if [ -f "$sysmodmap" ]; then
    "$xmodmap" "$sysmodmap"
fi

if [ -f "$userresources" ]; then
    if [ -x /usr/bin/cpp ] ; then
        "$xrdb" -merge "$userresources"
    else
        "$xrdb" -nocpp -merge "$userresources"
    fi
fi

if [ -f "$usermodmap" ]; then
    "$xmodmap" "$usermodmap"
fi

# start some nice programs

if [ -d "$xinitdir"/xinitrc.d ] ; then
	for f in "$xinitdir/xinitrc.d"/?*.sh ; do
		[ -x "$f" ] && . "$f"
	done
	unset f
fi

openbox-session $@ <&-  > /dev/null 2>&1

sorry for my bad english

Offline

#16 2026-02-16 14:47:47

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

This block is important

if [ -d "$xinitdir"/xinitrc.d ] ; then
	for f in "$xinitdir/xinitrc.d"/?*.sh ; do
		[ -x "$f" ] && . "$f"
	done
	unset f
fi

Can you script

sudo chvt 2; sleep 10; sudo chvt 1

to switch from tty1 to tty2 and back 10s later?
(Ie. is this an input problem or an output problem)

Offline

#17 2026-02-16 17:00:49

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

This block is important
Can you script

sudo chvt 2; sleep 10; sudo chvt 1

to switch from tty1 to tty2 and back 10s later?
(Ie. is this an input problem or an output problem)

I've tested the script 4 times: the first 3 runs were successful, but the fourth one caused a total crash (No output when it worked).
The problem happens when it goes back to tty1.
As I wrote before, the problem is random and doesn't always occur. Only enabling a DM fully resolves the issue.

Last edited by quellen (2026-02-16 17:07:24)


sorry for my bad english

Offline

#18 2026-02-16 23:12:00

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 73,301

Re: [SOLVED] System Freezes when switching TTY

The problem happens when it goes back to tty1.

Does it also happen if you don't startx automatically in your bash_profile (do you also autologin?) but login on the console, wait some seconds and then startx?
Still smells like the udev thing, though…

the fourth one caused a total crash (No output when it worked).

yes, with Alt+SysRq+B i can eset

seth wrote:

REISUB - the S and the U are especially useful because they'll allow the journal to be written to disk, maybe preserving what's wrong.

If you cleanly reboot w/ sysrq+REISUB out of the freeze you'll get the incident covered in the journal of the previous boot (sudo journactl -b -1)

Offline

#19 2026-02-17 09:26:17

quellen
Member
From: Italy
Registered: 2014-05-24
Posts: 364

Re: [SOLVED] System Freezes when switching TTY

seth wrote:

Still smells like the udev thing, though…

Thanks! Looks like you were right from the start, it was a gamepad issue. I checked the udev rules and found this one:

$ cat /etc/udev/rules.d/99-joypad.rules 
KERNEL=="event*", SUBSYSTEM=="input", MODE="0666", TAG+="uaccess"

I commented it out and it seems like the problem's been SOLVED.
It says it was created on Feb 12th, but I don’t remember doing it and have no clue what it’s even for.

$ stat /etc/udev/rules.d/99-joypad.rules 
  File: /etc/udev/rules.d/99-joypad.rules
  Size: 67        	Blocks: 8          IO Block: 4096   regular file
Device: 8,1	Inode: 2545584     Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2026-02-16 10:20:36.074190745 +0100
Modify: 2026-02-17 09:45:45.334916386 +0100
Change: 2026-02-17 09:45:45.334916386 +0100
Birth: 2026-02-12 22:17:07.677362538 +0100

EDIT:
I searched through my Gemini AI history and discovered that Gemini itself recommended that rule to fix the issue with L2/R2 buttons not working correctly on wine -_-

Last edited by quellen (2026-02-17 09:41:52)


sorry for my bad english

Offline

Board footer

Powered by FluxBB