You are not logged in.
Pages: 1
Hello, I know this is not the best place but I bought new parts for PC. I turned it on for first time, set boot priority to usb and i install arch the manual way. Everything worked fine, i firstly tried limine but it was too complicated so i went went casual way with grub. Now computer is lets say bricked (soft bricked). Some people say thats is because i tried limine and then went with grub, that UEFI NVRAM didnt wrote complitly. when i turn on the PC, fan spin but everything is black. so because i knew that i should be in tty if GPU didnt worked i typed my username and password and then poweroff, but nothing happend so that means that bios doesnt even start, no motherboard boot screen and boot light is on (debug light).
My specs:
i5-12600kf
msi b750 gaming plus ddr4
ddr4 ram,
rx 7600
i checked and hdmi is in gpu. I also tried making contact with screw at JBAT1 for 10s but still no sign of life.
Any help would help.
Last edited by TartilupA (2026-05-30 05:16:23)
Tarty
Offline
i typed my username and password and then poweroff, but nothing happend
When rebooting the system (w/ the power button) can you
- enter the UEFI
- see the MSI logo
- enter grub
Can you then boot the multi-user.target (2nd link below) in doubt along the "nomodeset" parameter?
Offline
I was here a little bit not enough specific. I didnt saw anything so i typed my username in tty so i could see if its the gpu problem or just doesnt boot. It doesnt boot.
Tarty
Offline
i knew that i should be in tty if GPU didnt worked i typed my username and password and then poweroff
I didnt saw anything so i typed my username in tty so i could see if its the gpu problem or just doesnt boot. It doesnt boot.
Those are wildly unfounded and most likely at least in part incorrect assumptions.
When rebooting the system (w/ the power button) can you
- enter the UEFI
- see the MSI logo
- enter grubCan you then boot the multi-user.target (2nd link below) in doubt along the "nomodeset" parameter?
Offline
Pages: 1