You are not logged in.
Hi,
not sure if it helps but I remember that I had similar problem a few times.
Try to force the module load order.
in my rc.conf modules are loaded in following order:
MODULES=(rtc aes-i586 twofish agpgart intel-agp drm dm-crypt e1000 ipw3945 snd-hda-intel fuse)Thinkpad x60s with inte sound.
If you get sound working use rc.local to load alsa settings after reboot, mine got lost after every reboot.
Just add:
alsactl restoreWorth a try..
Regards,
xor
i tryed what you said...incredible...it doesnt work...not even forcing....no error come up no nothing....i dont know what configs the devs change from the last to this one....but that is what make with this with no sound....but i didnt even get help from any developers....dammm
Its a sick world we live in....
Offline
can any dev explain what they added or change to the latest kernel26 and kernel26ck...then i could compile the kernel without that changes....
Its a sick world we live in....
Offline
the latest kernel contains alsa-0.14rc3, i'll drive through the alsa bugtracker tomorrow and try to find a fix but i cannot promise anything, if you wanna help me, please also start at alsa ml mercury repository and bugtracker and point me to correct places, that would speed it up.
thanks
greetings
tpowa
Offline
Hi,
not sure if it helps but I remember that I had similar problem a few times.
Try to force the module load order.
in my rc.conf modules are loaded in following order:
MODULES=(rtc aes-i586 twofish agpgart intel-agp drm dm-crypt e1000 ipw3945 snd-hda-intel fuse)Thinkpad x60s with inte sound.
If you get sound working use rc.local to load alsa settings after reboot, mine got lost after every reboot.
Just add:
alsactl restoreWorth a try..
Regards,
xor
i allready tryed...thanks any way...:(
Its a sick world we live in....
Offline
well have you tried to switch the options of your soundcard in a mixer program?
like kmix or so, many soundcards have additional features that are controlled by switches.
if you don't get any error it could be one of the switches that are now new in alsa 1.0.14rc3
Offline
well have you tried to switch the options of your soundcard in a mixer program?
like kmix or so, many soundcards have additional features that are controlled by switches.
if you don't get any error it could be one of the switches that are now new in alsa 1.0.14rc3
yes im using gnome-alsamixer...and every time that i reinstall the latest kernel or just BOOT it the side channel is NOT there...very strange...and still just have 6 sound channels...it was supose to be there 8 channels...
Its a sick world we live in....
Offline
could you come online to irc?
Offline
the latest kernel contains alsa-0.14rc3, i'll drive through the alsa bugtracker tomorrow and try to find a fix but i cannot promise anything, if you wanna help me, please also start at alsa ml mercury repository and bugtracker and point me to correct places, that would speed it up.
thanks
greetings
tpowa
ill give it a try
Its a sick world we live in....
Offline
http://www.archlinux.org/~tpowa/kernel2 … pkg.tar.gz
please try this kernel it contains the latest mercury state of snd_hda_intel
thanks
greetings
tpowa
Offline
could you come online to irc?
ok i seek for you there
Its a sick world we live in....
Offline
http://www.archlinux.org/~tpowa/kernel2 … pkg.tar.gz
please try this kernel it contains the latest mercury state of snd_hda_intel
thanks
greetings
tpowa
i was exactly compiling that...ill try yours...
Its a sick world we live in....
Offline
http://www.archlinux.org/~tpowa/kernel2 … pkg.tar.gz
please try this kernel it contains the latest mercury state of snd_hda_intel
thanks
greetings
tpowa
sorry tpowa no good news...its exactly the same..not even forcing the modules if it loads...no sound..and still missing some confis on alsamixer and gnome-alsamixer....
Its a sick world we live in....
Offline
same problem here.. (Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
with kernel26 2.6.20.7-2 module is loaded but no sound device /dev/dsp with all kernels
Offline
Same here after kernel upgrade. Module snd_hda_intel is loaded, tried all the methods mentioned above ( downgrading alsa-lib etc), no go.
Sound came back after using the beyond kernel but that one has now problems with the fglrx-beyond
Offline
I've had similar problem on my laptop with same sound card (snd-hda-intel), now the sound is working properly. I've done this:
#alsaconf
#vim /etc/modprobe.conf 'Add the following line at the end of the file'
options snd-hda-intel model=auto
$aplay /usr/share/sounds/alsa/Front_Center.wav
$alsamixer
#alsactl store
Reboot and I hope it will work!
Good luck!
Offline
I've had similar problem on my laptop with same sound card (snd-hda-intel), now the sound is working properly. I've done this:
#alsaconf
#vim /etc/modprobe.conf 'Add the following line at the end of the file'
options snd-hda-intel model=auto
$aplay /usr/share/sounds/alsa/Front_Center.wav
$alsamixer
#alsactl storeReboot and I hope it will work!
Good luck!
not work here.. i tried everything..
Offline
i opened a ticket in flyspray for this issue: http://bugs.archlinux.org/task/6978
EDIT--
I roll back to kernel26beyond from extra (2.6.19) and i got sound again
Last edited by kastor (2007-04-24 17:31:43)
Offline
i opened a ticket in flyspray for this issue: http://bugs.archlinux.org/task/6978
EDIT--
I roll back to kernel26beyond from extra (2.6.19) and i got sound again
this bug is so anoying i wish the people upstream would fix it. its a bug in almost every kernel since .19 . their are a bunch of work around guides online that dont work for my laptop and the only fix is using old kernel, witch isnt a fix. im really disapointed in the community because this has been around so long and the kernel devs havent fixed it. so use with toshiba / gateway / hp latops with this kind of sound system are left with nothing.
shame shame. but not to arch devs i just mean upstream
Registered: 2007-05-05
Keep coming back to Arch because its hands down the most amazing distro God has given us.
Offline