You are not logged in.

#1 2007-08-07 10:01:06

Registered: 2007-08-07
Posts: 8

Problem with IDE DVD drive

Hey guys.  I just built a desktop and I've been having some problems recognizing my hardware.  I've got a SATA hard drive and it works fine, but my IDE dvd burner isn't recognized.  It doesn't show up under /dev/ and lspci -v returns

        03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6121 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Marvell Technology Group Ltd. Unknown device 6121
        Flags: bus master, fast devsel, latency 0, IRQ 10
        I/O ports at cc00 [size=8]
        I/O ports at c880 [size=4]
        I/O ports at c800 [size=8]
        I/O ports at c480 [size=4]
        I/O ports at c400 [size=16]
        Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

I'm running an Intel Core 2 Duo e6850 on an MSI p35 platinum motherboard with 64 bit Arch installed.  The drive gave me some problems when I installed arch; I could boot the CD, but once I tried to install any packages it told me that no CD drive was found, so I had to install from FTP.  I'd really like to have 64bit Arch on this computer, so I'd really appreciate any help.  Thanks.


Board footer

Powered by FluxBB