You are not logged in.
I installed archlinux in vmware, and I can use mp3 storage just in archlinux some days ago.
But after upgrade, it didn't work.
here is the information:
[root@localhost ~]# dmesg
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 18
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 18, io base 0x00001060
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-1: reset full speed USB device using uhci_hcd and address 2
usb 1-1: reset full speed USB device using uhci_hcd and address 2
usb 1-1: reset full speed USB device using uhci_hcd and address 2
usb 1-1: reset full speed USB device using uhci_hcd and address 2
usb-storage: device scan complete
[root@localhost ~]# lsusb
Bus 001 Device 002: ID 066f:8000 SigmaTel, Inc.
Bus 001 Device 001: ID 0000:0000
[root@localhost ~]# fdisk -l
Disk /dev/sda: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 62 497983+ 83 Linux
/dev/sda2 63 522 3694950 83 Linuxmy kernel version is 2.6.22.6-1, and there appears no mistake, so what else I need to do?
Offline