You are not logged in.

Pages: 1

#1 2007-11-06 20:34:58

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

USB 2.0 PCI Card

Hi,

Bought a USB 2.0 PCI Card for my aging motherboard (only have USB 1.1), but can't get it recognised.

Do I need to load any particular modules?

Can anyone point me in the right direction?

cheers

Offline

#2 2007-11-06 20:44:56

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

First, try lspci to see the status......

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#3 2007-11-06 21:16:43

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

[carl@moschops ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04)
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 04)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 USB Controller: NEC Corporation USB (rev 43)
02:04.1 USB Controller: NEC Corporation USB (rev 43)
02:04.2 USB Controller: NEC Corporation USB 2.0 (rev 04)

It's that NEC controller in slot 4

Offline

#4 2007-11-06 21:31:12

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

You may get better performance if you try a different pci slot?

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#5 2007-11-06 21:36:19

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

Currently I'm not getting *any* performance. Nothing that I plug in gets recognised.

I would try another slot, but they're all occupied. (Slot 0 is inaccessible due to the large, overhanging fan I put on my graphics card)

Offline

#6 2007-11-06 21:45:27

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

Try also lsusb to see if usb 2.0 is provided for....

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#7 2007-11-06 21:54:07

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

Another look-see is ......usbview......shows ehci connects///

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#8 2007-11-06 22:00:47

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

4 claims to be usb 2.0, so I guess that's good?

[carl@moschops ~]$ lsusb
Bus 005 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000
[carl@moschops ~]$ sudo lsusb -v

Bus 005 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.23-ARCH ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:02:04.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood       15 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 003 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.23-ARCH ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:02:04.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood       15 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 004 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.23-ARCH ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:02:04.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             5
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.23-ARCH uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1f.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.23-ARCH uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1f.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Offline

#9 2007-11-06 22:04:35

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

Just tried usbview, and it does indeed show the usb 2.0 device, at 480Mb/s, and even lists the corect number of ports (5)

so why does nothing work when I plug stuff into it sad

Offline

#10 2007-11-06 22:08:44

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

You might look into ......Orange Micro...... for a  USB  driver.....

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#11 2007-11-06 22:23:07

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

ok - thanks for your help

Offline

#12 2007-11-06 22:51:34

lilsirecho
Veteran
Registered: 2003-10-24
Posts: 5,000

Re: USB 2.0 PCI Card

Perhaps you need a ...hal...daemon in rc.conf..

Then the usb device appears in media....

Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit!     X-ray confirms Iam spineless!

Offline

#13 2007-11-07 11:01:24

zenlord
Member
From: Belgium
Registered: 2006-05-24
Posts: 1,221
Website

Re: USB 2.0 PCI Card

Does dmesg show anything around the time you plug a device in?

If it shows something like "usb 2-1: device descriptor read/64, error -62", then we are having the same problem.

I have this problem with both uhci_hcd (onboard USB) en ehci_hcd (PCI USB-card) on the same system. The USB-drive I'm trying is recognised on my Debian-system at work (Testing, Lenny), but when I try an Ubuntu 7.10 live on the Problematic system, than I get the same error.

My guess is this is kernel-related. The Debian-system that is working uses an older kernel (2.22.2) than both Arch current and Ubuntu 7.10.

Zl.

Offline

#14 2007-11-07 19:57:10

soylent_green_is_hamster
Member
Registered: 2006-11-15
Posts: 109

Re: USB 2.0 PCI Card

I was quite surprised this morning to find the memory stick that I had left in last night, was now recognised, and I could mount it fine!
This evening however, it's not being recognised again!
There's nothing wrong with the PCI slot, and I've tried another USB 2 controller, which works absolutely fine. Think it's fair to say it was broken.

thanks for all the comments nonetheless!

Offline

Pages: 1

Board footer

Powered by FluxBB