You are not logged in.

#301 2009-05-23 12:33:32

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

Here's my conky, plagiarised from all the good tips provided in this thread! - wink Thanks all
conky.png

Russ

Offline

#302 2009-05-23 19:38:56

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: conky configs and screenshots!

A simple conky to mach my wallpaper:

th_green-pipes.png

background no
use_xft yes
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
update_interval 3.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades no
draw_outline no
draw_borders no
alignment bottom_left
gap_x 20
gap_y 0
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 3
override_utf8_locale no
use_spacer none

TEXT
${font samanata}${offset 1260}
${font Radio Space Bold:size=20}${goto 1090}${color #26A9AD}RAM:  ${memperc}%
        
            
${font Radio Space Bold:size=20}${goto 170}${color #7cb193}Temp: ${acpitemp}
       
   
${font Radio Space Bold:size=20}${goto 1120}${color #fef200}CPU: ${cpu cpu0}%
   
     
${font Radio Space Bold:size=20}${goto 150}${color #26A9AD}Battery: ${battery_percent C15E}%
    
     
${color #7cb193}${font Radio Space Bold:size=30}${goto 870}${time %l:%M %p}

${color #2B7578}${font Radio Space Bold:size=28}${goto 332}${time %b %d %y}${font Radio Space Bold:size=20}

${goto 730}${color #4B91BF}$nodename on $sysname $kernel

Really simple. Works great on screen res 1280x800.  Hope you like it ;-)


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

#303 2009-05-28 02:46:27

jwcxz
Member
Registered: 2008-09-23
Posts: 239
Website

Re: conky configs and screenshots!

I think it's time that I share my conky config.  It's nowhere near finished, but I think it's getting there.  I'm looking for a better monospaced font to use though (I'm using ProggyTiny right now, http://proggyfonts.com/).

09-05-27.conky.png

Config: http://jwcxz.com/f/09-05-27.conkyrc

There are basically four external scripts at work.  Two are for Amarok: if it is running, as.py displays the current track title, album, and artist (retrieved via DBUS) and ap.py displays a progress bar for the track.  The other two are for the weather.  Every 15 minutes (as directed by cron), a Python script retrieves weather data from weather.com and stores it to a temporary text file.  Then, conky periodically invokes a shell script to grab parts of that text file and format them.  This saves me from having to access the web more than once every 15 minutes.


-- jwc
http://jwcxz.com/ | blog
dotman - manage your dotfiles across multiple environments
icsy - an alarm for powernappers

Offline

#304 2009-05-28 03:51:21

lolilolicon
Member
Registered: 2009-03-05
Posts: 1,716

Re: conky configs and screenshots!

aymara wrote:

A simple conky to mach my wallpaper:

http://i164.photobucket.com/albums/u5/a … -pipes.png

Really simple. Works great on screen res 1280x800.  Hope you like it ;-)

Interesting! big_smile
Accidentally, My screen is exactly the same res as yours, ain't that destiny?:P

Wallpaper please;)


This silver ladybug at line 28...

Offline

#305 2009-05-30 03:28:46

kalpik
Member
From: India
Registered: 2007-05-08
Posts: 163
Website

Re: conky configs and screenshots!

ruscook wrote:

Here's my conky, plagiarised from all the good tips provided in this thread! - wink Thanks all
http://westcom.no-ip.info/ub-pics/conky.png

Russ

conkyrc please? big_smile

Offline

#306 2009-05-30 10:15:26

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

kalpik wrote:
ruscook wrote:

Here's my conky, plagiarised from all the good tips provided in this thread! - wink Thanks all
http://westcom.no-ip.info/ub-pics/conky.png

conkyrc please? big_smile

Sorry I forgot! Here's the 2 conkrc files and the autostartscript.

.conkyrc2

# set to yes if you want Conky to be forked in the background
background no

cpu_avg_samples 2
net_avg_samples 2
text_buffer_size 1024

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager


# Text alpha when using Xft
xftalpha 0.8

# on_bottom yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 5

# Use double buffering (reduces flicker, may not work for everyone)
 double_buffer yes

# Minimum size of text area
#minimum_size 280 5
#maximum_width 150

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 13
gap_y 10
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

# Subtract file system buffers from used memory?
no_buffers yes


# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description                
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                        
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM        
#                                    battery. ACPI battery number can be      
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered                
#  cached                            Amount of memory cached                  
#  color             (color)         Change drawing color to color            
#  cpu                               CPU usage in percents                    
#  cpubar            (height)        Bar that shows CPU usage, height is      
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes              
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                  
#  exec              shell command   Executes a shell command and displays    
#                                    the output in torsmo. warning: this      
#                                    takes a lot more resources than other    
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-).  
#  execi             interval, shell Same as exec but with specific interval. 
#                    command         Interval can't be less than              
#                                    update_interval in configuration.        
#  fs_bar            (height), (fs)  Bar that shows how much space is used on 
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file      
#                                    system.                                  
#  fs_free           (fs)            Free space on a file system available    
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.              
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in 
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C  
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp 
#                                    meaning temperature. n is number of the  
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example                
#  mails                             Mail count in mail spool. You can use    
#                                    program like fetchmail to get mails from 
#                                    some server using your favourite         
#                                    protocol. See also new_mails.            
#  mem                               Amount of memory in use                  
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use              
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before 
#                                    torsmo displays anything and puts output 
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),        
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line        
#                    (height)        
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                    
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use                
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more 
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't 
#                                    seem to be a way to know how many times  
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow 
#  updates                           Number of updates (for debugging)        
#  upspeed           net             Upload speed in kilobytes                
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                  
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
TEXT
${font OpenLogos:size=60}B${font}
${font OpenLogos:size=14}z${font}${color1}Host: ${color1}${nodename}
${color7}${font openlogos:size=14}B ${font}${color1}Kernel:${color1}${alignr}$kernel
${voffset 2}${color7}${font}SYSTEM ${font}${color0}${hr 1}
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} CPU0:${color #c000a0}${cpu cpu0}% ${color1}CPU1 Usage:${color #c000a0}${cpu cpu1}%${color7}${alignr}Freq:${color #c000a0}${freq}${color}MHz
${color black}${cpugraph 000000 c000a0}
${voffset 2}${color7}${font StyleBats:size=14}g${font}${color1} RAM:  $memperc% $mem/ $memmax${alignr}${color7}${membar 10,60 1}
${voffset 2}${color7}${font StyleBats:size=14}j${font}${color1} SWAP: $swapperc% $swap/ $swapmax${alignr}${color7}${swapbar 10,60 1}

${color7}${font}NET ${font}${color0}${hr}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}O${font}${color1} Up:   ${upspeed eth0} kb/s ${alignr}${color7}${upspeedgraph eth0 12,120 0000ff ff0000}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}U${font}${color1} Down: ${downspeed eth0} kb/s ${alignr}${color7}${downspeedgraph eth0 12,120 ff0000 0000ff}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}T${font}${color1} Download: ${totaldown eth0} ${voffset -2}${color7}${font PizzaDude Bullets:size=14}N${font}${color1} Upload: ${alignr}${totalup eth0}
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Local Ip: ${alignr}${addr eth0}

${color7}${font}DISK ${color0}${hr}
${voffset 1}${color7}${font}${font Dejavu Sans:bold:size=10}${alignr}                   Free     Used         Size   % Free
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Root:${alignr}$color ${fs_free /}${color lightgrey} ${fs_used /} /$color ${fs_size /} - ${fs_free_perc /}%
${voffset 6}${fs_bar 12 /}
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Home:${alignr}$color ${fs_free /home}${color lightgrey} ${fs_used /home}/$color ${fs_size /home} - ${fs_free_perc /home}%
${voffset 6}${fs_bar 12 /home}

${color7}${font}PROCESSES ${color0}${hr}
${color7}Running:$color $running_processes ${color7}${alignr}Total Processes:$color $processes  ${color grey}

${color}Name              PID     CPU%   MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color lightgrey} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}

${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color lightgrey} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color lightgrey} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}

.conkyrc

# set to yes if you want Conky to be forked in the background
background no

# cpu_avg_samples 2
# net_avg_samples 2
text_buffer_size 1200

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager


# Text alpha when using Xft
xftalpha 0.8

# on_bottom yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 120
# update_interval 5

# Use double buffering (reduces flicker, may not work for everyone)
 double_buffer yes

# Minimum size of text area
#minimum_size 280 5
#maximum_width 150

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
#minimum_size 10 10
# minimum_size 185 0

#alignment top_left
alignment top_right
# alignment bottom_left
# alignment bottom_right

gap_x 350
gap_y 10

# Gap between borders of screen and text

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description                
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                        
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM        
#                                    battery. ACPI battery number can be      
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered                
#  cached                            Amount of memory cached                  
#  color             (color)         Change drawing color to color            
#  cpu                               CPU usage in percents                    
#  cpubar            (height)        Bar that shows CPU usage, height is      
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes              
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                  
#  exec              shell command   Executes a shell command and displays    
#                                    the output in torsmo. warning: this      
#                                    takes a lot more resources than other    
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-).  
#  execi             interval, shell Same as exec but with specific interval. 
#                    command         Interval can't be less than              
#                                    update_interval in configuration.        
#  fs_bar            (height), (fs)  Bar that shows how much space is used on 
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file      
#                                    system.                                  
#  fs_free           (fs)            Free space on a file system available    
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.              
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in 
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C  
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp 
#                                    meaning temperature. n is number of the  
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example                
#  mails                             Mail count in mail spool. You can use    
#                                    program like fetchmail to get mails from 
#                                    some server using your favourite         
#                                    protocol. See also new_mails.            
#  mem                               Amount of memory in use                  
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use              
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before 
#                                    torsmo displays anything and puts output 
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),        
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line        
#                    (height)        
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                    
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use                
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more 
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't 
#                                    seem to be a way to know how many times  
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow 
#  updates                           Number of updates (for debugging)        
#  upspeed           net             Upload speed in kilobytes                
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                  
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
TEXT
${font OpenLogos:size=66}t${font}
${color7}${font StyleBats:size=14}q${font}${color1} UpTime:${color1}${alignr}$uptime
${font StyleBats:size=14}b${font}${color1} Arch Update: ${color1}${execi 300 ~/bin/archupdates.sh}
DATE ${hr}
${alignc 35}${font Arial Black:size=26}${time %I:%M %P}${font}
${alignc}${time %A %d %B}
${voffset 4}${font}${font DejaVu Sans Mono:size=8}${execpi 3600 DJS=`date +%_d`; cal -m | sed '1d' | sed '/./!d' | sed 's/$/                     /' | fold -w 21 | sed -n '/^.\{21\}/p' | sed 's/^/${alignc} /' | sed /" $DJS "/s/" $DJS "/" "'${color FCAF3E}'"$DJS"'${color0}'" "/}${font}
WEATHER ${hr}
${execpi 10800 conkyForecast -t /usr/share/conkyforecast/conkyForecast.template}

The following goes in my xfce4 session startup

#!/bin/sh
killall conky
conky -dc ~/.conkyrc2
conky -dc ~/.conkyrc

Offline

#307 2009-05-30 10:39:18

kalpik
Member
From: India
Registered: 2007-05-08
Posts: 163
Website

Re: conky configs and screenshots!

Thanks!

I cannot seem to find the PizzaDude font sad

Offline

#308 2009-05-30 13:41:21

Leigh
Member
From: USA
Registered: 2004-06-25
Posts: 533

Re: conky configs and screenshots!

Here's mine. It's pretty basic really, no fancy scripts. It still took me forever tweaking it to match my desktop, especially the way I set up the mpd info. Was a lot of frustrating trial and error.

Full screen shot here, Is at 1680 x 1050. or just the conky part linked to the pic.

may2009conky.png

My config is confusing with the alternating color codes. It frazzles my brain every time I go to change something.:rolleyes:

# conky config last updated 05/30/2009 (Allison)

background no
use_xft yes
xftfont DejaVu Sans Mono:size=10
xftalpha 0.8
update_interval 1.0
total_run_times 0
own_window  no
own_window_transparent yes
own_window_colour 000000
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades yes
draw_outline no
draw_borders no
stippled_borders 2
border_margin 4
border_width 1
draw_borders no
default_color 303030
default_shade_color 1B1B1B
default_outline_color black
alignment top_right
maximum_width 345
gap_x 15
gap_y 12
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer yes
mpd_host localhost
mpd_port 6600
text_buffer_size 256

TEXT
${voffset -4}${color #62DBDF}${font wqy-zenhei:size=12}宋莲丽 ${font DejaVu Sans Mono:size=10}${color #53B9BD}..... ${color #62DBDF}${alignr}${time %A %B %e %G} 
${voffset 4}
${voffset -3}${color #62DBDF}MPD${if_mpd_playing}${color #53B9BD}........ ${color #62DBDF}${mpd_status}${else}${color #53B9BD}.... ${color #62DBDF}Not Running${endif}
${font wqy-zenhei:size=11}${color #CAAAAA}${if_mpd_playing}${scroll 33${mpd_title}}${else}${color #B5B5B5}${font DejaVu Sans Mono:size=10}Song Title${color #53B9BD}:${endif}${font DejaVu Sans Mono:size=10}${color #B5B5B5}${alignr}kbps${color #53B9BD}.... ${color #62DBDF}${mpd_bitrate} 
${if_mpd_playing}${color #B5B5B5}By${color #53B9BD}: ${color #CAAAAA}${voffset -3}${font wqy-zenhei:size=11}${scroll 33${mpd_artist}}${font DejaVu Sans Mono:size=10}${alignr}${color #B5B5B5}Repeat${color #53B9BD}... ${color #62DBDF}${mpd_repeat} ${else}${color #B5B5B5}Artist${color #53B9BD}:${color #B5B5B5}${alignr}Repeat${color #53B9BD}... ${color #62DBDF}0 ${endif}
${color #B5B5B5}Length ${color #62DBDF}${mpd_length}      ${color #B5B5B5}Elapsed ${color #62DBDF}${mpd_elapsed}      ${color #B5B5B5}VOL ${color #62DBDF}${alignr}$mpd_vol% 

${voffset -4}${color #62DBDF}System
${voffset 6}${color #B5B5B5}${sysname} Kernel${color #53B9BD}..........${color #B5B5B5}${execi 1000 cat /etc/sabayon-release} $kernel $machine
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}0 ${color #53B9BD}.. ${color #B5B5B5}${alignr}${exec COUNT=$(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | wc -l)
echo $(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | uniq)} 
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}1 ${color #53B9BD}.. ${color #B5B5B5}${alignr}${exec COUNT=$(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | wc -l)
echo $(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | uniq)} 
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}0 ${color #62DBDF}${cpu cpu1}% ${color #18696C}${cpubar cpu1 5}
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}1 ${color #62DBDF}${cpu cpu2}% ${color #18696C}${cpubar cpu2 5}
${color #B5B5B5}Load Average${color #53B9BD}.................. ${color #B5B5B5}${loadavg 1} ${color #53B9BD}/ ${color #B5B5B5}${loadavg 3}
${color #B5B5B5}Uptime${color #53B9BD}......................... ${color #B5B5B5}${alignr}${uptime}  

${voffset -5}${color #62DBDF}RAM
${voffset 4}${color #62DBDF}Used${color #53B9BD}: ${color #62DBDF}$memperc% ${color #18696C}${membar 5}
${color #B5B5B5}Free${color #53B9BD}.............................. ${color #B5B5B5}${alignr}${memeasyfree} 
${color #B5B5B5}Total${color #53B9BD}............................. ${color #B5B5B5}${alignr}${memmax} 
${color #B5B5B5}Catched${color #53B9BD}........................... ${color #B5B5B5}${alignr}${cached}
${color #B5B5B5}Buffered${color #53B9BD}.......................... ${color #B5B5B5}${alignr}${buffers} 
${color #B5B5B5}Unallocated${color #53B9BD}....................... ${color #B5B5B5}${alignr}${memfree} 

${voffset -5}${color #62DBDF}Disks
${voffset 5}${color #B5B5B5}sda${color #53B9BD}.... ${color #B5B5B5}temp ${color #62DBDF}${execi 300 nc localhost 7634 | cut -c31-32 ;}°C        ${color #B5B5B5}sdb${color #53B9BD}.... ${color #B5B5B5}temp ${color #62DBDF}${execi 300 nc localhost 7634 | cut -c66-67 ;}°C
${color #B5B5B5}Read${color #53B9BD}.... ${color #B5B5B5}${diskio_read /dev/sda}  Write${color #53B9BD}.... ${color #B5B5B5}${diskio_write /dev/sda}

${voffset -5}${color #62DBDF}Partitions
${voffset 5}${color #B5B5B5}sda1${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /boot}% ${color #18696C}${fs_bar 5 /boot}
${color #B5B5B5}sda3${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /}% ${color #18696C}${fs_bar 5 /}
${color #B5B5B5}sdb4${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /home/lianli/sdb4}% ${color #18696C}${fs_bar 5 /home/lianli/sdb4}
${color #B5B5B5}sda1${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /boot}${color #53B9BD} .... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /boot} 
${color #B5B5B5}sda3${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /}${color #53B9BD}..... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /} 
${color #B5B5B5}sdb4${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /home/lianli/sdb4}${color #53B9BD}..... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /home/lianli/sdb4}
${color #B5B5B5}sda2${color #53B9BD}.... ${color #B5B5B5}Swap ${color #B5B5B5}Used${color #53B9BD}: ${color #62DBDF}${swapperc}% ${color #18696C}${swapbar}

${voffset -5}${color #62DBDF}USB Backup
${voffset 5}${if_mounted /mnt/sdc1}${color #B5B5B5}sdc1${color #53B9BD}..... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /mnt/sdc1}${color #53B9BD}.... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /mnt/sdc1} ${else}${color #B5B5B5}External sdc1${color #53B9BD}................. ${color #B5B5B5}${alignr}Not Mounted ${endif}
${if_mounted /mnt/sdc3}${color #B5B5B5}sdc3${color #53B9BD}..... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /mnt/sdc3}${color #53B9BD}.... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /mnt/sdc3} ${else}${color #B5B5B5}External sdc3${color #53B9BD}................. ${color #B5B5B5}${alignr}Not Mounted ${endif}

${voffset -5}${color #62DBDF}GPU - Nvidia
${voffset 5}${color #B5B5B5}Geforce 7900${color #53B9BD} ..... ${color #B5B5B5}512 MB${color #53B9BD} ...... ${color #B5B5B5}temp ${color #62DBDF}${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color #B5B5B5}Geforce 6800${color #53B9BD} ..... ${color #B5B5B5}256 MB${color #53B9BD} ...... ${color #B5B5B5}temp ${color #62DBDF}${execi 30 nvidia-settings -q [gpu:1]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color #B5B5B5}Geforce MX 440${color #53B9BD} .... ${color #B5B5B5}64 MB${color #53B9BD} ...... ${color #B5B5B5}temp Null

${voffset -4}${color #62DBDF}Network
${voffset 4}${color #B5B5B5}Upload Kb/s  ${upspeedf eth0}  Download Kb/s  ${downspeedf eth0}
${color #B5B5B5}Inbound${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 1 32767 count}      ${color #B5B5B5}Outbound${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 32768 61000 count}      ${color #B5B5B5}Total${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 1 65535 count}

${voffset -4}${color #62DBDF}Processes
${voffset 4}Names${color #53B9BD}...         ${color #62DBDF}PID       CPU%      MEM%
${color #B5B5B5}${top name 1} ${top pid 1}    ${top cpu 1}    ${top mem 1}
${color #B5B5B5}${top name 2} ${top pid 2}    ${top cpu 2}    ${top mem 2}
${color #B5B5B5}${top name 3} ${top pid 3}    ${top cpu 3}    ${top mem 3}
${color #62DBDF}Mem usage${color #53B9BD}... 
${color #B5B5B5}${top_mem name 1} ${top_mem pid 1}    ${top_mem cpu 1}    ${top_mem mem 1}
${color #B5B5B5}${top_mem name 2} ${top_mem pid 2}    ${top_mem cpu 2}    ${top_mem mem 2}
${color #B5B5B5}${top_mem name 3} ${top_mem pid 3}    ${top_mem cpu 3}    ${top_mem mem 3}

Edit... slightly updated, added a few offsets with new background.

Last edited by Leigh (2009-06-01 07:15:08)


-- archlinux 是一个极好的 linux

Offline

#309 2009-05-31 11:27:44

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

kalpik wrote:

Thanks!
I cannot seem to find the PizzaDude font sad

I can't remember for sure where I got it from but I think this was one of the sites I tried on searching: http://www.fonts4free.net/pizzadude-bullets-font.html and http://www.fonts4free.net/openlogos-font.html and finally http://www.fontage.com/pages/pie4mp.html

Have fun!
Russ

Offline

#310 2009-05-31 12:41:27

kalpik
Member
From: India
Registered: 2007-05-08
Posts: 163
Website

Re: conky configs and screenshots!

Thanks! I found it smile

Offline

#311 2009-06-01 01:13:37

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

Don't forget to post your finished product screen shots and conkyrc.
Russ

Offline

#312 2009-06-01 02:12:07

kalpik
Member
From: India
Registered: 2007-05-08
Posts: 163
Website

Re: conky configs and screenshots!

Sure!

Here's my final conky:

Screenshot-3.png

And the .conkyrc:

# set to yes if you want Conky to be forked in the background
background no

cpu_avg_samples 2
net_avg_samples 2
text_buffer_size 1024

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_hints undecorated,below,skip_taskbar
own_window_type override
#own_window_transparent yes
#own_window_type normal
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager


# Text alpha when using Xft
xftalpha 0.8

# on_bottom yes

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 2

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 300 5
maximum_width 300

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 13
gap_y 80
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

# Subtract file system buffers from used memory?
no_buffers yes


# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description                
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                        
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM        
#                                    battery. ACPI battery number can be      
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered                
#  cached                            Amount of memory cached                  
#  color             (color)         Change drawing color to color            
#  cpu                               CPU usage in percents                    
#  cpubar            (height)        Bar that shows CPU usage, height is      
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes              
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                  
#  exec              shell command   Executes a shell command and displays    
#                                    the output in torsmo. warning: this      
#                                    takes a lot more resources than other    
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-).  
#  execi             interval, shell Same as exec but with specific interval. 
#                    command         Interval can't be less than              
#                                    update_interval in configuration.        
#  fs_bar            (height), (fs)  Bar that shows how much space is used on 
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file      
#                                    system.                                  
#  fs_free           (fs)            Free space on a file system available    
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.              
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in 
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C  
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp 
#                                    meaning temperature. n is number of the  
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example                
#  mails                             Mail count in mail spool. You can use    
#                                    program like fetchmail to get mails from 
#                                    some server using your favourite         
#                                    protocol. See also new_mails.            
#  mem                               Amount of memory in use                  
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use              
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before 
#                                    torsmo displays anything and puts output 
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),        
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line        
#                    (height)        
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                    
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use                
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more 
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't 
#                                    seem to be a way to know how many times  
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow 
#  updates                           Number of updates (for debugging)        
#  upspeed           net             Upload speed in kilobytes                
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                  
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
TEXT
${font OpenLogos:size=50}B${font}

${color7}${font StyleBats:size=14}q ${font}${color1}Uptime:${color1}${alignr}$uptime 
${color7}${font StyleBats:size=14}b ${font}${color1}Load Avg:${color1}${alignr}$loadavg 

${voffset 2}${color7}${font Dejavu Sans:bold:size=10}SYSTEM ${font}${color0}${hr 1}
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} Core 1: ${cpu cpu0}% ${color7}${font StyleBats:size=14}A${font}${color1} Core 2: ${cpu cpu1}% ${color7}${alignr}Freq: ${freq}MHz${color} 
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} Core 3: ${cpu cpu2}% ${color7}${font StyleBats:size=14}A${font}${color1} Core 4: ${cpu cpu3}%
${voffset 2}${color7}${font StyleBats:size=14}g${font}${color1} RAM:  $memperc% $mem/ $memmax${alignr}${color7}${membar 10,60 1}

${voffset 2}${color7}${font Dejavu Sans:bold:size=10}CPU USAGE ${font}${color0}${hr 1}
${color black}${cpugraph 000022 c000a0}
${voffset 2}${color7}${font Dejavu Sans:bold:size=10}TEMPERATURE ${font}${color0}${hr 1}
${voffset 2}${font StyleBats:size=14}A${font} Core 1: ${platform coretemp.0 temp 1}°C${color}${alignr}${font StyleBats:size=14}A${font} Core 2: ${platform coretemp.1 temp 1}°C ${color}
${voffset 2}${font StyleBats:size=14}A${font} Core 3: ${platform coretemp.2 temp 1}°C${color}${alignr}${font StyleBats:size=14}A${font} Core 4: ${platform coretemp.3 temp 1}°C ${color}
${voffset 2}${font StyleBats:size=14}A${font} GPU: ${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C

${color7}${font Dejavu Sans:bold:size=10}NET ${font}${color0}${hr}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}O${font}${color1} Up:   ${upspeed eth0} kb/s ${alignr}${color7}${upspeedgraph eth0 12,120 0000ff ff0000}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}U${font}${color1} Down: ${downspeed eth0} kb/s ${alignr}${color7}${downspeedgraph eth0 12,120 ff0000 0000ff}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}T${font}${color1} Download: ${totaldown eth0} ${voffset -2}${color7}${alignr}${font PizzaDude Bullets:size=14}N${font}${color1} Upload: ${totalup eth0}  
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Local Ip: ${alignr}${addr eth0}
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Public Ip: ${alignr}${execi 3600 /home/kalpik/conky/myip}

${color7}${font Dejavu Sans:bold:size=10}DISK ${color0}${hr}
${voffset 1}${color7}${font}${font Dejavu Sans:bold:size=10}${alignr}                   Free     Used         Size   % Free
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Root:${alignr}$color ${fs_free /}${color lightgrey} ${fs_used /} /$color ${fs_size /} - ${fs_free_perc /}%
${voffset 6}${fs_bar 12 /}

${color7}${font Dejavu Sans:bold:size=10}PROCESSES ${font}${color0}${hr}
${color7}Running:$color $running_processes ${color7}${alignr}Total Processes:$color $processes  ${color grey}

${color}CPU Usage          PID   CPU%   MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color lightgrey} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}

${color}Mem Usage          PID   CPU%   MEM%
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color lightgrey} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color lightgrey} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}
${hr 1}

Offline

#313 2009-06-01 11:28:02

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

Nice kalpik, and a 4 core machine to boot - I'm suitably jealous smile

Russ

Offline

#314 2009-06-01 11:30:40

kalpik
Member
From: India
Registered: 2007-05-08
Posts: 163
Website

Re: conky configs and screenshots!

Heh.. the conky is just modified from the posts above me tongue So i wont take any credit for that smile

But yes, its nice to have a quad core big_smile

Im planning to add 2 more gigs of RAM to it tongue

Offline

#315 2009-06-08 19:50:01

ugaciaka
Member
From: Italy
Registered: 2008-07-06
Posts: 140
Website

Re: conky configs and screenshots!

my conky cool

tMXN2ag

# Written By BaSh
# http://www.deelab.org/bash/
#
# Writter By ugaciaka
# www.ugaciaka.wordpress.com
# For HardDisk Temperature need hddtemp is daemon

# Options
use_xft yes
background yes
xftfont terminus:size=8
#xftfont anorexia
#xftfont  smoothansi:size=10
xftalpha 1
update_interval 1.0
total_run_times 0
#se metto yes ho lo sfarfallio di conky che mi copre le finestre, se metto no devo togliere le icone dal desktop in xfce
own_window yes 
# normalmente con i DE
own_window_type override
# per openbox
#own_window_type desktop
#own_window_hints below,sticky,skip_taskbar,skip_pager,undecorated
own_window_transparent yes
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
no_buffers yes
cpu_avg_samples 1
net_avg_samples 2
override_utf8_locale yes
uppercase no
#use_spacer no

# colors
#default_color white
#default_shade_color white
#default_outline_color grey
#color0 white
#color0 black
color0 e0e0e0
color1 e0e0e0
color2 1aff14
color3 ed2424
# Position
alignment top_right
gap_x 30
gap_y 50

# Parameters
TEXT
${color #729FCF}${font zekton:size=9}SISTEMA${font} ${color1}$hr
${color0}CPU: ${exec uname -p}
${color0}Kernel: $sysname ${alignr}Versione: $kernel
${color0}Architettura: $machine ${alignr}Hostname: $nodename
${color #729FCF}${font zekton:size=9}TEMPERATURE${font} ${color1}$hr
${color0}CPU Temp: ${execi 30 sensors | awk '/temp2/ {print $2}'} ${alignr}Sys Temp: ${execi 30 sensors | awk '/temp1/ {print $2}'}
${color0}CPU Fan: ${execi 30 sensors | awk '/fan2/ {print $2}'} RPM
${color0}/dev/sda Temp: +${hddtemp /dev/sda}°C ${alignr}/dev/sdb Temp: +${hddtemp /dev/sdb}°C
${color #729FCF}${font zekton:size=9}PROCESSI${font} ${color1}$hr
${color0}Core0: ${cpu cpu0}% @ ${freq_g 0}GHz ${alignr}Core1: ${cpu cpu1}% @ ${freq_G 1}GHz
${color0}${cpugraph cpu0 30,140 000000 000000} ${alignr}${cpugraph cpu1 30,140 000000 000000}
${color0}Processo ${alignc}    CPU%   MEM%
${color0}${top name 1} ${alignc}  ${top cpu 1}  ${top mem 1}
${color0}${top name 2} ${alignc}  ${top cpu 2}  ${top mem 2}
${color0}${top name 3} ${alignc}  ${top cpu 3}  ${top mem 3}
${color #729FCF}${font zekton:size=9}MEMORIA${font} ${color1}$hr
${color0}RAM (${memperc}% Use): $mem/$memmax $membar
${color0}Swap (${swapperc}% Use): $swap/$swapmax $swapbar
${color #729FCF}${font zekton:size=9}PARTIZIONI${font} ${color1}$hr
${color0}root (${fs_free_perc /}% Free): ${color0}${fs_used /}${color0}/${color0}${fs_size /} ${color0}${fs_bar /}
${color0}home (${fs_free_perc /home}% Free): ${color0}${fs_used /home}${color0}/${color0}${fs_size /home} ${color0}${fs_bar /home}
${color0}tmp (${fs_free_perc /tmp}% Free): ${color0}${fs_used /tmp}${color0}/${color0}${fs_size /tmp} ${color0}${fs_bar /tmp}
${color0}pacman (${fs_free_perc /var/cache/pacman}% Free): ${color0}${fs_used /var/cache/pacman}${color0}/${color0}${fs_size /var/cache/pacman} ${color0}${fs_bar /var/cache/pacman}
${color0}ScambioWin (${fs_free_perc /mnt/ScambioWin}% Free): ${color0}${fs_used /mnt/ScambioWin}${color0}/${color0}${fs_size /mnt/ScambioWin} ${color0}${fs_bar /mnt/ScambioWin}
${color0}VirtualBox (${fs_free_perc /home/ugaciaka/.VirtualBox}% Free): ${color0}${fs_used /home/ugaciaka/.VirtualBox}${color0}/${color0}${fs_size /home/ugaciaka/.VirtualBox} ${color0}${fs_bar /home/ugaciaka/.VirtualBox}
${color #729FCF}${font zekton:size=9}WLAN0${font} ${color1}$hr
${color0}IP: ${addr wlan0} ${alignr}Gateway: ${gw_ip}
${color0}Segnale: ${wireless_link_qual_perc wlan0}%
${color0}Down: ${downspeedf wlan0} kB/s ${alignr}Up: ${upspeedf wlan0} kB/s
${color0}${downspeedgraph wlan0 30,140 000000 000000} ${alignr}${color0}${upspeedgraph wlan0 30,140 000000 000000}
${color #729FCF}${font zekton:size=9}APC${font} ${color1}$hr
${color0}Autonomia: ${execi 60 apcaccess | awk '/TIMELEFT/ {print $3}'} Minuti ${alignr}Batteria: ${execi 60 apcaccess | awk '/BCHARGE/ {print $3}'}%
${color0}Numero trasferimenti: ${execi 60 apcaccess | awk '/NUMXFERS/ {print $3}'}

I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi

Offline

#316 2009-06-17 22:25:57

Mr Pink57
Member
From: a van down by the river
Registered: 2009-05-30
Posts: 91
Website

Re: conky configs and screenshots!

background-1-1.png

# conky config
# taskbar layout

# position
alignment top_center
background yes
gap_x 2
gap_y 2
#minimum_size 1668 20
 
# font
override_utf8_locale yes
use_xft yes
xftfont Terminus:size=8
xftalpha 0.8
 
# color
color0 1994d1
color1 63b6e0
default_color white
default_outline_color white
default_shade_color black
 
 
# misc
cpu_avg_samples 1
double_buffer yes
net_avg_samples 1
no_buffers yes
short_units yes
 
TEXT
${alignc}${offset 45}${color1}$nodename${color} ${color0}${sysname}-${machine} ${kernel} ${color}${texeci 18000 perl ~/scripts/arch-updates/list_upgradable.pl} | ${color0}CPU${color} ${font Terminus:size=8}@${font} ${freq_g}GHz ${cpu}% ${acpitemp}°C | $uptime_short | ${color0}RAM${color} ${mem} ${memperc}% | ${color0}SWAP${color} ${swap} ${swapperc}%  | ${color0}WLAN${color} ${wireless_essid eth0} ${wireless_link_qual_perc eth0} ${color0}LAN${color0} ${font PizzaDude Bullets:size=8}U${font} ${color}${totaldown eth1}/${downspeed eth1} ${color0}${font PizzaDude Bullets:size=8}O${font} ${color}${totalup eth1}/${upspeed eth1} | ${execi 18000 weatherget -f ~/scripts/arch-updates/.conkyweatherrc --station-id=USMN0220 --standard} | ${color0}BATTERY${color} ${battery_short}

pink

Last edited by Mr Pink57 (2009-06-23 05:18:41)


Even a broken clock is right twice a day.

Diplomacy without force is like music without instruments.

Offline

#317 2009-06-18 01:37:02

aymara
Member
From: Argentina
Registered: 2008-07-08
Posts: 59
Website

Re: conky configs and screenshots!

lolilolicon wrote:
aymara wrote:

A simple conky to mach my wallpaper:

http://i164.photobucket.com/albums/u5/a … -pipes.png

Really simple. Works great on screen res 1280x800.  Hope you like it ;-)

Interesting! big_smile
Accidentally, My screen is exactly the same res as yours, ain't that destiny?:P

Wallpaper please;)

Here you have the wallpaper (Sorry i didn't do it before!!) --> http://interfacelift.com/wallpaper_beta … mbing.html


http://archlinux.me/aymara/ ----> Newbie forever...  ¬¬

Offline

#318 2009-06-18 10:26:00

hells_dark
Member
From: France
Registered: 2007-11-13
Posts: 10
Website

Re: conky configs and screenshots!

leik >  good job smile

Offline

#319 2009-06-19 11:16:14

ruscook
Member
From: Sydney Australia
Registered: 2007-08-27
Posts: 105
Website

Re: conky configs and screenshots!

kalpik wrote:

Heh.. the conky is just modified from the posts above me tongue So i wont take any credit for that smile

But yes, its nice to have a quad core big_smile

Im planning to add 2 more gigs of RAM to it tongue

I get away with 2GB on my dual core, but I can see a 4core would need 4GB at least to really fly and run lots of apps.

Damn, I want a new road pushy, dual head screen, and 4 core system... Guess I want too many toys to get them all soon :-)

Russ

Offline

#320 2009-06-22 20:21:57

jazz.arch
Member
From: Austria
Registered: 2008-09-20
Posts: 29

Re: conky configs and screenshots!

Hello!

To show Consonance (lightweight music manager) information in conky, I wrote the following script:

#!/bin/bash
while getopts "a?i?t?" Option; do
    case $Option in
        a )
            ALBUM=`consonance -c | grep album`
            echo "${ALBUM:7}"
            ;;
        i )
            INTERPRET=`consonance -c | grep artist`
            echo "${INTERPRET:8}"
            ;;
        t )
            TITLE=`consonance -c | grep title`
            echo "${TITLE:7}"
            ;;
        * ) 
            echo "Illegal option detected. [ERROR]"
            exit 1
            ;;
    esac
done
shift $(($OPTIND - 1))

Since Consonance currently only supports getting all information at once, and since string manipulation in bash is anything but funny, the script is pretty crappy at the moment - feel free to improve it!

The according part in your conkyrc looks like this:

${if_running consonance}${color #98c2c7}${font}CONSONANCE ${color0}${hr}
${font Rock Star 2.0:size=20}T${font}${alignc}${execi 5 ~/consonanceinfo.sh -i}
${font Rock Star 2.0:size=20}Y${font}${alignc}${execi 5 ~/consonanceinfo.sh -t}
${font Rock Star 2.0:size=20}K${font}${alignc}${execi 5 ~/consonanceinfo.sh -a}${endif}

You can find the Rock Star font here (direct link).

Here's the result:
consonanceconky.png

Offline

#321 2009-06-25 21:41:42

colbert
Member
Registered: 2007-12-16
Posts: 809

Re: conky configs and screenshots!

d3d!k wrote:

Screen: click here
Conky: click here

Hey, can you share the desktop info script (in shell w/Arch logo in ASCII)? I have one that is quite outdated, that one looks far nicer, much appreciated if you can, thanks smile

Offline

#322 2009-06-25 23:33:29

colbert
Member
Registered: 2007-12-16
Posts: 809

Re: conky configs and screenshots!

Can someone help to use cut to display only the current and next month with cal?

${color3}${exec cal -3 -m}

Offline

#323 2009-06-26 06:32:08

Reasons
Member
From: Washington
Registered: 2007-11-04
Posts: 572

Re: conky configs and screenshots!

pre_exec cal -3 | cut -c23-64

use theh pre so it only runs once.

Offline

#324 2009-06-26 16:14:17

WarmMachine
Member
From: Cluj-Napoca, Romania
Registered: 2008-11-04
Posts: 2

Re: conky configs and screenshots!

http://imgur.com/DeQ0J.png

Found it on some site and modified it to suit my needs.

Last edited by WarmMachine (2009-06-26 16:14:57)

Offline

#325 2009-06-26 18:35:53

geoisis
Member
From: greece
Registered: 2007-09-02
Posts: 100
Website

Re: conky configs and screenshots!

WarmMachine wrote:

http://imgur.com/DeQ0J.png

Found it on some site and modified it to suit my needs.

how did you get the album art to work with conky ?


Archlinux x86_64 | post-engineering | last.fm

Offline

Board footer

Powered by FluxBB