You are not logged in.
- Topics: Active | Unanswered
#301 2009-05-23 12:33:32
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
Here's my conky, plagiarised from all the good tips provided in this thread! - 
Thanks all 
Russ
Offline
#302 2009-05-23 19:38:56
- aymara
- Member
- From: Argentina
- Registered: 2008-07-08
- Posts: 59
- Website
Re: conky configs and screenshots!
A simple conky to mach my wallpaper:
background no
use_xft yes
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
update_interval 3.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades no
draw_outline no
draw_borders no
alignment bottom_left
gap_x 20
gap_y 0
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 3
override_utf8_locale no
use_spacer none
TEXT
${font samanata}${offset 1260}
${font Radio Space Bold:size=20}${goto 1090}${color #26A9AD}RAM: ${memperc}%
${font Radio Space Bold:size=20}${goto 170}${color #7cb193}Temp: ${acpitemp}
${font Radio Space Bold:size=20}${goto 1120}${color #fef200}CPU: ${cpu cpu0}%
${font Radio Space Bold:size=20}${goto 150}${color #26A9AD}Battery: ${battery_percent C15E}%
${color #7cb193}${font Radio Space Bold:size=30}${goto 870}${time %l:%M %p}
${color #2B7578}${font Radio Space Bold:size=28}${goto 332}${time %b %d %y}${font Radio Space Bold:size=20}
${goto 730}${color #4B91BF}$nodename on $sysname $kernelReally simple. Works great on screen res 1280x800. Hope you like it ;-)
http://archlinux.me/aymara/ ----> Newbie forever... ¬¬
Offline
#303 2009-05-28 02:46:27
- jwcxz
- Member
- Registered: 2008-09-23
- Posts: 239
- Website
Re: conky configs and screenshots!
I think it's time that I share my conky config. It's nowhere near finished, but I think it's getting there. I'm looking for a better monospaced font to use though (I'm using ProggyTiny right now, http://proggyfonts.com/).
Config: http://jwcxz.com/f/09-05-27.conkyrc
There are basically four external scripts at work. Two are for Amarok: if it is running, as.py displays the current track title, album, and artist (retrieved via DBUS) and ap.py displays a progress bar for the track. The other two are for the weather. Every 15 minutes (as directed by cron), a Python script retrieves weather data from weather.com and stores it to a temporary text file. Then, conky periodically invokes a shell script to grab parts of that text file and format them. This saves me from having to access the web more than once every 15 minutes.
-- jwc
http://jwcxz.com/ | blog
dotman - manage your dotfiles across multiple environments
icsy - an alarm for powernappers
Offline
#304 2009-05-28 03:51:21
- lolilolicon
- Member
- Registered: 2009-03-05
- Posts: 1,722
Re: conky configs and screenshots!
aymara wrote:
A simple conky to mach my wallpaper:
http://i164.photobucket.com/albums/u5/a … -pipes.png
Really simple. Works great on screen res 1280x800. Hope you like it ;-)
Interesting! 
Accidentally, My screen is exactly the same res as yours, ain't that destiny?:P
Wallpaper please;)
This silver ladybug at line 28...
Offline
#305 2009-05-30 03:28:46
- kalpik
- Member
- From: India
- Registered: 2007-05-08
- Posts: 163
- Website
Re: conky configs and screenshots!
ruscook wrote:
Here's my conky, plagiarised from all the good tips provided in this thread! -
http://westcom.no-ip.info/ub-pics/conky.pngRuss
conkyrc please?
Offline
#306 2009-05-30 10:15:26
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
kalpik wrote:
ruscook wrote:Here's my conky, plagiarised from all the good tips provided in this thread! -
http://westcom.no-ip.info/ub-pics/conky.pngconkyrc please?
Sorry I forgot! Here's the 2 conkrc files and the autostartscript.
.conkyrc2
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
text_buffer_size 1024
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Text alpha when using Xft
xftalpha 0.8
# on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 5
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
#minimum_size 280 5
#maximum_width 150
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 13
gap_y 10
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
TEXT
${font OpenLogos:size=60}B${font}
${font OpenLogos:size=14}z${font}${color1}Host: ${color1}${nodename}
${color7}${font openlogos:size=14}B ${font}${color1}Kernel:${color1}${alignr}$kernel
${voffset 2}${color7}${font}SYSTEM ${font}${color0}${hr 1}
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} CPU0:${color #c000a0}${cpu cpu0}% ${color1}CPU1 Usage:${color #c000a0}${cpu cpu1}%${color7}${alignr}Freq:${color #c000a0}${freq}${color}MHz
${color black}${cpugraph 000000 c000a0}
${voffset 2}${color7}${font StyleBats:size=14}g${font}${color1} RAM: $memperc% $mem/ $memmax${alignr}${color7}${membar 10,60 1}
${voffset 2}${color7}${font StyleBats:size=14}j${font}${color1} SWAP: $swapperc% $swap/ $swapmax${alignr}${color7}${swapbar 10,60 1}
${color7}${font}NET ${font}${color0}${hr}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}O${font}${color1} Up: ${upspeed eth0} kb/s ${alignr}${color7}${upspeedgraph eth0 12,120 0000ff ff0000}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}U${font}${color1} Down: ${downspeed eth0} kb/s ${alignr}${color7}${downspeedgraph eth0 12,120 ff0000 0000ff}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}T${font}${color1} Download: ${totaldown eth0} ${voffset -2}${color7}${font PizzaDude Bullets:size=14}N${font}${color1} Upload: ${alignr}${totalup eth0}
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Local Ip: ${alignr}${addr eth0}
${color7}${font}DISK ${color0}${hr}
${voffset 1}${color7}${font}${font Dejavu Sans:bold:size=10}${alignr} Free Used Size % Free
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Root:${alignr}$color ${fs_free /}${color lightgrey} ${fs_used /} /$color ${fs_size /} - ${fs_free_perc /}%
${voffset 6}${fs_bar 12 /}
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Home:${alignr}$color ${fs_free /home}${color lightgrey} ${fs_used /home}/$color ${fs_size /home} - ${fs_free_perc /home}%
${voffset 6}${fs_bar 12 /home}
${color7}${font}PROCESSES ${color0}${hr}
${color7}Running:$color $running_processes ${color7}${alignr}Total Processes:$color $processes ${color grey}
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color lightgrey} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color lightgrey} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color lightgrey} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}.conkyrc
# set to yes if you want Conky to be forked in the background
background no
# cpu_avg_samples 2
# net_avg_samples 2
text_buffer_size 1200
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Text alpha when using Xft
xftalpha 0.8
# on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 120
# update_interval 5
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
#minimum_size 280 5
#maximum_width 150
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#minimum_size 10 10
# minimum_size 185 0
#alignment top_left
alignment top_right
# alignment bottom_left
# alignment bottom_right
gap_x 350
gap_y 10
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument
TEXT
${font OpenLogos:size=66}t${font}
${color7}${font StyleBats:size=14}q${font}${color1} UpTime:${color1}${alignr}$uptime
${font StyleBats:size=14}b${font}${color1} Arch Update: ${color1}${execi 300 ~/bin/archupdates.sh}
DATE ${hr}
${alignc 35}${font Arial Black:size=26}${time %I:%M %P}${font}
${alignc}${time %A %d %B}
${voffset 4}${font}${font DejaVu Sans Mono:size=8}${execpi 3600 DJS=`date +%_d`; cal -m | sed '1d' | sed '/./!d' | sed 's/$/ /' | fold -w 21 | sed -n '/^.\{21\}/p' | sed 's/^/${alignc} /' | sed /" $DJS "/s/" $DJS "/" "'${color FCAF3E}'"$DJS"'${color0}'" "/}${font}
WEATHER ${hr}
${execpi 10800 conkyForecast -t /usr/share/conkyforecast/conkyForecast.template}The following goes in my xfce4 session startup
#!/bin/sh
killall conky
conky -dc ~/.conkyrc2
conky -dc ~/.conkyrcOffline
#307 2009-05-30 10:39:18
- kalpik
- Member
- From: India
- Registered: 2007-05-08
- Posts: 163
- Website
Re: conky configs and screenshots!
Thanks!
I cannot seem to find the PizzaDude font 
Offline
#308 2009-05-30 13:41:21
- Leigh
- Member
- From: USA
- Registered: 2004-06-25
- Posts: 533
Re: conky configs and screenshots!
Here's mine. It's pretty basic really, no fancy scripts. It still took me forever tweaking it to match my desktop, especially the way I set up the mpd info. Was a lot of frustrating trial and error.
Full screen shot here, Is at 1680 x 1050. or just the conky part linked to the pic.
My config is confusing with the alternating color codes. It frazzles my brain every time I go to change something.:rolleyes:
# conky config last updated 05/30/2009 (Allison)
background no
use_xft yes
xftfont DejaVu Sans Mono:size=10
xftalpha 0.8
update_interval 1.0
total_run_times 0
own_window no
own_window_transparent yes
own_window_colour 000000
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades yes
draw_outline no
draw_borders no
stippled_borders 2
border_margin 4
border_width 1
draw_borders no
default_color 303030
default_shade_color 1B1B1B
default_outline_color black
alignment top_right
maximum_width 345
gap_x 15
gap_y 12
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer yes
mpd_host localhost
mpd_port 6600
text_buffer_size 256
TEXT
${voffset -4}${color #62DBDF}${font wqy-zenhei:size=12}宋莲丽 ${font DejaVu Sans Mono:size=10}${color #53B9BD}..... ${color #62DBDF}${alignr}${time %A %B %e %G}
${voffset 4}
${voffset -3}${color #62DBDF}MPD${if_mpd_playing}${color #53B9BD}........ ${color #62DBDF}${mpd_status}${else}${color #53B9BD}.... ${color #62DBDF}Not Running${endif}
${font wqy-zenhei:size=11}${color #CAAAAA}${if_mpd_playing}${scroll 33${mpd_title}}${else}${color #B5B5B5}${font DejaVu Sans Mono:size=10}Song Title${color #53B9BD}:${endif}${font DejaVu Sans Mono:size=10}${color #B5B5B5}${alignr}kbps${color #53B9BD}.... ${color #62DBDF}${mpd_bitrate}
${if_mpd_playing}${color #B5B5B5}By${color #53B9BD}: ${color #CAAAAA}${voffset -3}${font wqy-zenhei:size=11}${scroll 33${mpd_artist}}${font DejaVu Sans Mono:size=10}${alignr}${color #B5B5B5}Repeat${color #53B9BD}... ${color #62DBDF}${mpd_repeat} ${else}${color #B5B5B5}Artist${color #53B9BD}:${color #B5B5B5}${alignr}Repeat${color #53B9BD}... ${color #62DBDF}0 ${endif}
${color #B5B5B5}Length ${color #62DBDF}${mpd_length} ${color #B5B5B5}Elapsed ${color #62DBDF}${mpd_elapsed} ${color #B5B5B5}VOL ${color #62DBDF}${alignr}$mpd_vol%
${voffset -4}${color #62DBDF}System
${voffset 6}${color #B5B5B5}${sysname} Kernel${color #53B9BD}..........${color #B5B5B5}${execi 1000 cat /etc/sabayon-release} $kernel $machine
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}0 ${color #53B9BD}.. ${color #B5B5B5}${alignr}${exec COUNT=$(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | wc -l)
echo $(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | uniq)}
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}1 ${color #53B9BD}.. ${color #B5B5B5}${alignr}${exec COUNT=$(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | wc -l)
echo $(cat /proc/cpuinfo | grep 'model name' | sed -e 's/.*: //' | uniq)}
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}0 ${color #62DBDF}${cpu cpu1}% ${color #18696C}${cpubar cpu1 5}
${color #B5B5B5}CPU${color #53B9BD}:${color #B5B5B5}1 ${color #62DBDF}${cpu cpu2}% ${color #18696C}${cpubar cpu2 5}
${color #B5B5B5}Load Average${color #53B9BD}.................. ${color #B5B5B5}${loadavg 1} ${color #53B9BD}/ ${color #B5B5B5}${loadavg 3}
${color #B5B5B5}Uptime${color #53B9BD}......................... ${color #B5B5B5}${alignr}${uptime}
${voffset -5}${color #62DBDF}RAM
${voffset 4}${color #62DBDF}Used${color #53B9BD}: ${color #62DBDF}$memperc% ${color #18696C}${membar 5}
${color #B5B5B5}Free${color #53B9BD}.............................. ${color #B5B5B5}${alignr}${memeasyfree}
${color #B5B5B5}Total${color #53B9BD}............................. ${color #B5B5B5}${alignr}${memmax}
${color #B5B5B5}Catched${color #53B9BD}........................... ${color #B5B5B5}${alignr}${cached}
${color #B5B5B5}Buffered${color #53B9BD}.......................... ${color #B5B5B5}${alignr}${buffers}
${color #B5B5B5}Unallocated${color #53B9BD}....................... ${color #B5B5B5}${alignr}${memfree}
${voffset -5}${color #62DBDF}Disks
${voffset 5}${color #B5B5B5}sda${color #53B9BD}.... ${color #B5B5B5}temp ${color #62DBDF}${execi 300 nc localhost 7634 | cut -c31-32 ;}°C ${color #B5B5B5}sdb${color #53B9BD}.... ${color #B5B5B5}temp ${color #62DBDF}${execi 300 nc localhost 7634 | cut -c66-67 ;}°C
${color #B5B5B5}Read${color #53B9BD}.... ${color #B5B5B5}${diskio_read /dev/sda} Write${color #53B9BD}.... ${color #B5B5B5}${diskio_write /dev/sda}
${voffset -5}${color #62DBDF}Partitions
${voffset 5}${color #B5B5B5}sda1${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /boot}% ${color #18696C}${fs_bar 5 /boot}
${color #B5B5B5}sda3${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /}% ${color #18696C}${fs_bar 5 /}
${color #B5B5B5}sdb4${color #53B9BD}.... ${color #B5B5B5}free${color #53B9BD}: ${color #62DBDF}${fs_free_perc /home/lianli/sdb4}% ${color #18696C}${fs_bar 5 /home/lianli/sdb4}
${color #B5B5B5}sda1${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /boot}${color #53B9BD} .... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /boot}
${color #B5B5B5}sda3${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /}${color #53B9BD}..... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /}
${color #B5B5B5}sdb4${color #53B9BD}.... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /home/lianli/sdb4}${color #53B9BD}..... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /home/lianli/sdb4}
${color #B5B5B5}sda2${color #53B9BD}.... ${color #B5B5B5}Swap ${color #B5B5B5}Used${color #53B9BD}: ${color #62DBDF}${swapperc}% ${color #18696C}${swapbar}
${voffset -5}${color #62DBDF}USB Backup
${voffset 5}${if_mounted /mnt/sdc1}${color #B5B5B5}sdc1${color #53B9BD}..... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /mnt/sdc1}${color #53B9BD}.... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /mnt/sdc1} ${else}${color #B5B5B5}External sdc1${color #53B9BD}................. ${color #B5B5B5}${alignr}Not Mounted ${endif}
${if_mounted /mnt/sdc3}${color #B5B5B5}sdc3${color #53B9BD}..... ${color #B5B5B5}Total${color #53B9BD}: ${color #B5B5B5}${fs_size /mnt/sdc3}${color #53B9BD}.... ${color #B5B5B5}Used${color #53B9BD}: ${color #B5B5B5}${alignr}${fs_used /mnt/sdc3} ${else}${color #B5B5B5}External sdc3${color #53B9BD}................. ${color #B5B5B5}${alignr}Not Mounted ${endif}
${voffset -5}${color #62DBDF}GPU - Nvidia
${voffset 5}${color #B5B5B5}Geforce 7900${color #53B9BD} ..... ${color #B5B5B5}512 MB${color #53B9BD} ...... ${color #B5B5B5}temp ${color #62DBDF}${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color #B5B5B5}Geforce 6800${color #53B9BD} ..... ${color #B5B5B5}256 MB${color #53B9BD} ...... ${color #B5B5B5}temp ${color #62DBDF}${execi 30 nvidia-settings -q [gpu:1]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color #B5B5B5}Geforce MX 440${color #53B9BD} .... ${color #B5B5B5}64 MB${color #53B9BD} ...... ${color #B5B5B5}temp Null
${voffset -4}${color #62DBDF}Network
${voffset 4}${color #B5B5B5}Upload Kb/s ${upspeedf eth0} Download Kb/s ${downspeedf eth0}
${color #B5B5B5}Inbound${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 1 32767 count} ${color #B5B5B5}Outbound${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 32768 61000 count} ${color #B5B5B5}Total${color #53B9BD}: ${color #FFFFFF}${tcp_portmon 1 65535 count}
${voffset -4}${color #62DBDF}Processes
${voffset 4}Names${color #53B9BD}... ${color #62DBDF}PID CPU% MEM%
${color #B5B5B5}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color #B5B5B5}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color #B5B5B5}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color #62DBDF}Mem usage${color #53B9BD}...
${color #B5B5B5}${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color #B5B5B5}${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color #B5B5B5}${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}Edit... slightly updated, added a few offsets with new background.
Last edited by Leigh (2009-06-01 07:15:08)
-- archlinux 是一个极好的 linux。
Offline
#309 2009-05-31 11:27:44
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
kalpik wrote:
Thanks!
I cannot seem to find the PizzaDude font
I can't remember for sure where I got it from but I think this was one of the sites I tried on searching: http://www.fonts4free.net/pizzadude-bullets-font.html and http://www.fonts4free.net/openlogos-font.html and finally http://www.fontage.com/pages/pie4mp.html
Have fun!
Russ
Offline
#310 2009-05-31 12:41:27
- kalpik
- Member
- From: India
- Registered: 2007-05-08
- Posts: 163
- Website
Re: conky configs and screenshots!
Thanks! I found it 
Offline
#311 2009-06-01 01:13:37
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
Don't forget to post your finished product screen shots and conkyrc.
Russ
Offline
#312 2009-06-01 02:12:07
- kalpik
- Member
- From: India
- Registered: 2007-05-08
- Posts: 163
- Website
Re: conky configs and screenshots!
Sure!
Here's my final conky:
And the .conkyrc:
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
text_buffer_size 1024
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_hints undecorated,below,skip_taskbar
own_window_type override
#own_window_transparent yes
#own_window_type normal
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Text alpha when using Xft
xftalpha 0.8
# on_bottom yes
# mail spool
mail_spool $MAIL
# Update interval in seconds
update_interval 2
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 300 5
maximum_width 300
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 13
gap_y 80
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer yes
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used:
#
# Variable Arguments Description
# acpiacadapter ACPI ac adapter state.
# acpifan ACPI fan state
# acpitemp ACPI temperature.
# adt746xcpu CPU temperature from therm_adt746x
# adt746xfan Fan speed from therm_adt746x
# battery (num) Remaining capasity in ACPI or APM
# battery. ACPI battery number can be
# given as argument (default is BAT0).
# buffers Amount of memory buffered
# cached Amount of memory cached
# color (color) Change drawing color to color
# cpu CPU usage in percents
# cpubar (height) Bar that shows CPU usage, height is
# bar's height in pixels
# downspeed net Download speed in kilobytes
# downspeedf net Download speed in kilobytes with one
# decimal
# exec shell command Executes a shell command and displays
# the output in torsmo. warning: this
# takes a lot more resources than other
# variables. I'd recommend coding wanted
# behaviour in C and posting a patch :-).
# execi interval, shell Same as exec but with specific interval.
# command Interval can't be less than
# update_interval in configuration.
# fs_bar (height), (fs) Bar that shows how much space is used on
# a file system. height is the height in
# pixels. fs is any file on that file
# system.
# fs_free (fs) Free space on a file system available
# for users.
# fs_free_perc (fs) Free percentage of space on a file
# system available for users.
# fs_size (fs) File system size
# fs_used (fs) File system used space
# hr (height) Horizontal line, height is the height in
# pixels
# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
# may be omitted if you have only one I2C
# device. type is either in (or vol)
# meaning voltage, fan meaning fan or temp
# meaning temperature. n is number of the
# sensor. See /sys/bus/i2c/devices/ on
# your local computer.
# kernel Kernel version
# loadavg (1), (2), (3) System load average, 1 is for past 1
# minute, 2 for past 5 minutes and 3 for
# past 15 minutes.
# machine Machine, i686 for example
# mails Mail count in mail spool. You can use
# program like fetchmail to get mails from
# some server using your favourite
# protocol. See also new_mails.
# mem Amount of memory in use
# membar (height) Bar that shows amount of memory in use
# memmax Total amount of memory
# memperc Percentage of memory in use
# new_mails Unread mail count in mail spool.
# nodename Hostname
# outlinecolor (color) Change outline color
# pre_exec shell command Executes a shell command one time before
# torsmo displays anything and puts output
# as text.
# processes Total processes (sleeping and running)
# running_processes Running processes (not sleeping),
# requires Linux 2.6
# shadecolor (color) Change shading color
# stippled_hr (space), Stippled (dashed) horizontal line
# (height)
# swapbar (height) Bar that shows amount of swap in use
# swap Amount of swap in use
# swapmax Total amount of swap
# swapperc Percentage of swap in use
# sysname System name, Linux for example
# time (format) Local time, see man strftime to get more
# information about format
# totaldown net Total download, overflows at 4 GB on
# Linux with 32-bit arch and there doesn't
# seem to be a way to know how many times
# it has already done that before torsmo
# has started.
# totalup net Total upload, this one too, may overflow
# updates Number of updates (for debugging)
# upspeed net Upload speed in kilobytes
# upspeedf net Upload speed in kilobytes with one
# decimal
# uptime Uptime
# uptime_short Uptime in a shorter format
#
# seti_prog Seti@home current progress
# seti_progbar (height) Seti@home current progress bar
# seti_credit Seti@hoome total user credit
# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
TEXT
${font OpenLogos:size=50}B${font}
${color7}${font StyleBats:size=14}q ${font}${color1}Uptime:${color1}${alignr}$uptime
${color7}${font StyleBats:size=14}b ${font}${color1}Load Avg:${color1}${alignr}$loadavg
${voffset 2}${color7}${font Dejavu Sans:bold:size=10}SYSTEM ${font}${color0}${hr 1}
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} Core 1: ${cpu cpu0}% ${color7}${font StyleBats:size=14}A${font}${color1} Core 2: ${cpu cpu1}% ${color7}${alignr}Freq: ${freq}MHz${color}
${voffset 2}${color7}${font StyleBats:size=14}A${font}${color1} Core 3: ${cpu cpu2}% ${color7}${font StyleBats:size=14}A${font}${color1} Core 4: ${cpu cpu3}%
${voffset 2}${color7}${font StyleBats:size=14}g${font}${color1} RAM: $memperc% $mem/ $memmax${alignr}${color7}${membar 10,60 1}
${voffset 2}${color7}${font Dejavu Sans:bold:size=10}CPU USAGE ${font}${color0}${hr 1}
${color black}${cpugraph 000022 c000a0}
${voffset 2}${color7}${font Dejavu Sans:bold:size=10}TEMPERATURE ${font}${color0}${hr 1}
${voffset 2}${font StyleBats:size=14}A${font} Core 1: ${platform coretemp.0 temp 1}°C${color}${alignr}${font StyleBats:size=14}A${font} Core 2: ${platform coretemp.1 temp 1}°C ${color}
${voffset 2}${font StyleBats:size=14}A${font} Core 3: ${platform coretemp.2 temp 1}°C${color}${alignr}${font StyleBats:size=14}A${font} Core 4: ${platform coretemp.3 temp 1}°C ${color}
${voffset 2}${font StyleBats:size=14}A${font} GPU: ${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'}°C
${color7}${font Dejavu Sans:bold:size=10}NET ${font}${color0}${hr}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}O${font}${color1} Up: ${upspeed eth0} kb/s ${alignr}${color7}${upspeedgraph eth0 12,120 0000ff ff0000}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}U${font}${color1} Down: ${downspeed eth0} kb/s ${alignr}${color7}${downspeedgraph eth0 12,120 ff0000 0000ff}
${voffset 2}${color7}${font PizzaDude Bullets:size=14}T${font}${color1} Download: ${totaldown eth0} ${voffset -2}${color7}${alignr}${font PizzaDude Bullets:size=14}N${font}${color1} Upload: ${totalup eth0}
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Local Ip: ${alignr}${addr eth0}
${color7}${font PizzaDude Bullets:size=14}a${font}${color1} Public Ip: ${alignr}${execi 3600 /home/kalpik/conky/myip}
${color7}${font Dejavu Sans:bold:size=10}DISK ${color0}${hr}
${voffset 1}${color7}${font}${font Dejavu Sans:bold:size=10}${alignr} Free Used Size % Free
${voffset 6}${font Pie charts for maps:size=14}7${font}${color1} ${voffset -5}Root:${alignr}$color ${fs_free /}${color lightgrey} ${fs_used /} /$color ${fs_size /} - ${fs_free_perc /}%
${voffset 6}${fs_bar 12 /}
${color7}${font Dejavu Sans:bold:size=10}PROCESSES ${font}${color0}${hr}
${color7}Running:$color $running_processes ${color7}${alignr}Total Processes:$color $processes ${color grey}
${color}CPU Usage PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color lightgrey} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}
${color}Mem Usage PID CPU% MEM%
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color lightgrey} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color lightgrey} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}
${hr 1}Offline
#313 2009-06-01 11:28:02
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
Nice kalpik, and a 4 core machine to boot - I'm suitably jealous
Russ
Offline
#314 2009-06-01 11:30:40
- kalpik
- Member
- From: India
- Registered: 2007-05-08
- Posts: 163
- Website
Re: conky configs and screenshots!
Heh.. the conky is just modified from the posts above me 
So i wont take any credit for that
But yes, its nice to have a quad core
Im planning to add 2 more gigs of RAM to it
Offline
#315 2009-06-08 19:50:01
- ugaciaka
- Member
- From: Italy
- Registered: 2008-07-06
- Posts: 140
- Website
Re: conky configs and screenshots!
my conky 
# Written By BaSh
# http://www.deelab.org/bash/
#
# Writter By ugaciaka
# www.ugaciaka.wordpress.com
# For HardDisk Temperature need hddtemp is daemon
# Options
use_xft yes
background yes
xftfont terminus:size=8
#xftfont anorexia
#xftfont smoothansi:size=10
xftalpha 1
update_interval 1.0
total_run_times 0
#se metto yes ho lo sfarfallio di conky che mi copre le finestre, se metto no devo togliere le icone dal desktop in xfce
own_window yes
# normalmente con i DE
own_window_type override
# per openbox
#own_window_type desktop
#own_window_hints below,sticky,skip_taskbar,skip_pager,undecorated
own_window_transparent yes
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
no_buffers yes
cpu_avg_samples 1
net_avg_samples 2
override_utf8_locale yes
uppercase no
#use_spacer no
# colors
#default_color white
#default_shade_color white
#default_outline_color grey
#color0 white
#color0 black
color0 e0e0e0
color1 e0e0e0
color2 1aff14
color3 ed2424
# Position
alignment top_right
gap_x 30
gap_y 50
# Parameters
TEXT
${color #729FCF}${font zekton:size=9}SISTEMA${font} ${color1}$hr
${color0}CPU: ${exec uname -p}
${color0}Kernel: $sysname ${alignr}Versione: $kernel
${color0}Architettura: $machine ${alignr}Hostname: $nodename
${color #729FCF}${font zekton:size=9}TEMPERATURE${font} ${color1}$hr
${color0}CPU Temp: ${execi 30 sensors | awk '/temp2/ {print $2}'} ${alignr}Sys Temp: ${execi 30 sensors | awk '/temp1/ {print $2}'}
${color0}CPU Fan: ${execi 30 sensors | awk '/fan2/ {print $2}'} RPM
${color0}/dev/sda Temp: +${hddtemp /dev/sda}°C ${alignr}/dev/sdb Temp: +${hddtemp /dev/sdb}°C
${color #729FCF}${font zekton:size=9}PROCESSI${font} ${color1}$hr
${color0}Core0: ${cpu cpu0}% @ ${freq_g 0}GHz ${alignr}Core1: ${cpu cpu1}% @ ${freq_G 1}GHz
${color0}${cpugraph cpu0 30,140 000000 000000} ${alignr}${cpugraph cpu1 30,140 000000 000000}
${color0}Processo ${alignc} CPU% MEM%
${color0}${top name 1} ${alignc} ${top cpu 1} ${top mem 1}
${color0}${top name 2} ${alignc} ${top cpu 2} ${top mem 2}
${color0}${top name 3} ${alignc} ${top cpu 3} ${top mem 3}
${color #729FCF}${font zekton:size=9}MEMORIA${font} ${color1}$hr
${color0}RAM (${memperc}% Use): $mem/$memmax $membar
${color0}Swap (${swapperc}% Use): $swap/$swapmax $swapbar
${color #729FCF}${font zekton:size=9}PARTIZIONI${font} ${color1}$hr
${color0}root (${fs_free_perc /}% Free): ${color0}${fs_used /}${color0}/${color0}${fs_size /} ${color0}${fs_bar /}
${color0}home (${fs_free_perc /home}% Free): ${color0}${fs_used /home}${color0}/${color0}${fs_size /home} ${color0}${fs_bar /home}
${color0}tmp (${fs_free_perc /tmp}% Free): ${color0}${fs_used /tmp}${color0}/${color0}${fs_size /tmp} ${color0}${fs_bar /tmp}
${color0}pacman (${fs_free_perc /var/cache/pacman}% Free): ${color0}${fs_used /var/cache/pacman}${color0}/${color0}${fs_size /var/cache/pacman} ${color0}${fs_bar /var/cache/pacman}
${color0}ScambioWin (${fs_free_perc /mnt/ScambioWin}% Free): ${color0}${fs_used /mnt/ScambioWin}${color0}/${color0}${fs_size /mnt/ScambioWin} ${color0}${fs_bar /mnt/ScambioWin}
${color0}VirtualBox (${fs_free_perc /home/ugaciaka/.VirtualBox}% Free): ${color0}${fs_used /home/ugaciaka/.VirtualBox}${color0}/${color0}${fs_size /home/ugaciaka/.VirtualBox} ${color0}${fs_bar /home/ugaciaka/.VirtualBox}
${color #729FCF}${font zekton:size=9}WLAN0${font} ${color1}$hr
${color0}IP: ${addr wlan0} ${alignr}Gateway: ${gw_ip}
${color0}Segnale: ${wireless_link_qual_perc wlan0}%
${color0}Down: ${downspeedf wlan0} kB/s ${alignr}Up: ${upspeedf wlan0} kB/s
${color0}${downspeedgraph wlan0 30,140 000000 000000} ${alignr}${color0}${upspeedgraph wlan0 30,140 000000 000000}
${color #729FCF}${font zekton:size=9}APC${font} ${color1}$hr
${color0}Autonomia: ${execi 60 apcaccess | awk '/TIMELEFT/ {print $3}'} Minuti ${alignr}Batteria: ${execi 60 apcaccess | awk '/BCHARGE/ {print $3}'}%
${color0}Numero trasferimenti: ${execi 60 apcaccess | awk '/NUMXFERS/ {print $3}'}I have never bought on ebay, the macbook I do not like, I do not need facebook or myspace or secondlife
I am not a nerd or lamer or troll or geek or hacker or cracker
and I have never voted to elect berlusconi
Offline
#316 2009-06-17 22:25:57
- Mr Pink57
- Member
- From: a van down by the river
- Registered: 2009-05-30
- Posts: 91
Re: conky configs and screenshots!
# conky config
# taskbar layout
# position
alignment top_center
background yes
gap_x 2
gap_y 2
#minimum_size 1668 20
# font
override_utf8_locale yes
use_xft yes
xftfont Terminus:size=8
xftalpha 0.8
# color
color0 1994d1
color1 63b6e0
default_color white
default_outline_color white
default_shade_color black
# misc
cpu_avg_samples 1
double_buffer yes
net_avg_samples 1
no_buffers yes
short_units yes
TEXT
${alignc}${offset 45}${color1}$nodename${color} ${color0}${sysname}-${machine} ${kernel} ${color}${texeci 18000 perl ~/scripts/arch-updates/list_upgradable.pl} | ${color0}CPU${color} ${font Terminus:size=8}@${font} ${freq_g}GHz ${cpu}% ${acpitemp}°C | $uptime_short | ${color0}RAM${color} ${mem} ${memperc}% | ${color0}SWAP${color} ${swap} ${swapperc}% | ${color0}WLAN${color} ${wireless_essid eth0} ${wireless_link_qual_perc eth0} ${color0}LAN${color0} ${font PizzaDude Bullets:size=8}U${font} ${color}${totaldown eth1}/${downspeed eth1} ${color0}${font PizzaDude Bullets:size=8}O${font} ${color}${totalup eth1}/${upspeed eth1} | ${execi 18000 weatherget -f ~/scripts/arch-updates/.conkyweatherrc --station-id=USMN0220 --standard} | ${color0}BATTERY${color} ${battery_short}pink
Last edited by Mr Pink57 (2009-06-23 05:18:41)
Even a broken clock is right twice a day.
Diplomacy without force is like music without instruments.
Offline
#317 2009-06-18 01:37:02
- aymara
- Member
- From: Argentina
- Registered: 2008-07-08
- Posts: 59
- Website
Re: conky configs and screenshots!
lolilolicon wrote:
aymara wrote:A simple conky to mach my wallpaper:
http://i164.photobucket.com/albums/u5/a … -pipes.png
Really simple. Works great on screen res 1280x800. Hope you like it ;-)
Interesting!
Accidentally, My screen is exactly the same res as yours, ain't that destiny?:PWallpaper please;)
Here you have the wallpaper (Sorry i didn't do it before!!) --> http://interfacelift.com/wallpaper_beta … mbing.html
http://archlinux.me/aymara/ ----> Newbie forever... ¬¬
Offline
#318 2009-06-18 10:26:00
- hells_dark
- Member
- From: France
- Registered: 2007-11-13
- Posts: 10
- Website
Re: conky configs and screenshots!
leik > good job
Offline
#319 2009-06-19 11:16:14
- ruscook
- Member
- From: Sydney Australia
- Registered: 2007-08-27
- Posts: 105
- Website
Re: conky configs and screenshots!
kalpik wrote:
Heh.. the conky is just modified from the posts above me
But yes, its nice to have a quad core
Im planning to add 2 more gigs of RAM to it
I get away with 2GB on my dual core, but I can see a 4core would need 4GB at least to really fly and run lots of apps.
Damn, I want a new road pushy, dual head screen, and 4 core system... Guess I want too many toys to get them all soon :-)
Russ
Offline
#320 2009-06-22 20:21:57
- jazz.arch
- Member
- From: Austria
- Registered: 2008-09-20
- Posts: 29
Re: conky configs and screenshots!
Hello!
To show Consonance (lightweight music manager) information in conky, I wrote the following script:
#!/bin/bash
while getopts "a?i?t?" Option; do
case $Option in
a )
ALBUM=`consonance -c | grep album`
echo "${ALBUM:7}"
;;
i )
INTERPRET=`consonance -c | grep artist`
echo "${INTERPRET:8}"
;;
t )
TITLE=`consonance -c | grep title`
echo "${TITLE:7}"
;;
* )
echo "Illegal option detected. [ERROR]"
exit 1
;;
esac
done
shift $(($OPTIND - 1))Since Consonance currently only supports getting all information at once, and since string manipulation in bash is anything but funny, the script is pretty crappy at the moment - feel free to improve it!
The according part in your conkyrc looks like this:
${if_running consonance}${color #98c2c7}${font}CONSONANCE ${color0}${hr}
${font Rock Star 2.0:size=20}T${font}${alignc}${execi 5 ~/consonanceinfo.sh -i}
${font Rock Star 2.0:size=20}Y${font}${alignc}${execi 5 ~/consonanceinfo.sh -t}
${font Rock Star 2.0:size=20}K${font}${alignc}${execi 5 ~/consonanceinfo.sh -a}${endif}You can find the Rock Star font here (direct link).
Here's the result:
Offline
#321 2009-06-25 21:41:42
- colbert
- Member
- Registered: 2007-12-16
- Posts: 809
Re: conky configs and screenshots!
d3d!k wrote:
Screen: click here
Conky: click here
Hey, can you share the desktop info script (in shell w/Arch logo in ASCII)? I have one that is quite outdated, that one looks far nicer, much appreciated if you can, thanks
Offline
#322 2009-06-25 23:33:29
- colbert
- Member
- Registered: 2007-12-16
- Posts: 809
Re: conky configs and screenshots!
Can someone help to use cut to display only the current and next month with cal?
${color3}${exec cal -3 -m}Offline
#323 2009-06-26 06:32:08
- Reasons
- Member
- From: Washington
- Registered: 2007-11-04
- Posts: 572
Re: conky configs and screenshots!
pre_exec cal -3 | cut -c23-64
use theh pre so it only runs once.
Offline
#324 2009-06-26 16:14:17
- WarmMachine
- Member
- From: Cluj-Napoca, Romania
- Registered: 2008-11-04
- Posts: 2
Re: conky configs and screenshots!
Found it on some site and modified it to suit my needs.
Last edited by WarmMachine (2009-06-26 16:14:57)
Offline
#325 2009-06-26 18:35:53
- geoisis
- Member
- From: greece
- Registered: 2007-09-02
- Posts: 100
- Website
Re: conky configs and screenshots!
WarmMachine wrote:
Found it on some site and modified it to suit my needs.
how did you get the album art to work with conky ?
Archlinux x86_64 | post-engineering | last.fm
Offline