You are not logged in.

Pages: 1

#1 2008-02-07 21:12:37

Zibi1981
Member
From: Poland
Registered: 2008-01-31
Posts: 642

[SOLVED] fglrx(0): [drm] failed to remove DRM signal handler

Hello! smile
I'm new to Arch so please forgive me if I'm asking about something obvious.
After spending many hours on reading and comprehension of Arch philosophy I finally dared to install Arch 2007.08-02 (Don't Panic) on my computer wink Fortunately I was prepared for text-mode configuration, but obviously not prepared enough... My first major problem is with the X server. I have followed strictly the instructions from the wiki and installed xorg and catalyst drivers afterwards (for Radeon X800 Pro). Now probably something is wrong with my xorg.conf, which you can see below, but there's also a bit more sophisticated problem causing this type of message in /var/log/Xorg.0.log

(II) fglrx(0): Shutdown CMMQS
(EE) fglrx(0): [drm] failed to remove DRM signal handler
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0xb7c78000
(II) fglrx(0): [drm] Closed DRM master.

I couldn't find a solution either on this board and on the web as well, so I dare to ask for a little tip what to do to solve this wink
Thx in advance.

P.S. My xorg.conf

# Auto-generated by Archie mkxcfg

Section "ServerLayout"
    Identifier     "My Layout"
    Screen      0  "aticonfig-Screen[0]" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse1" "CorePointer"
EndSection

Section "Files"

#    FontPath     "/usr/share/fonts/75dpi:unscaled"
#    FontPath     "/usr/share/fonts/75dpi"
# Additional fonts: Locale, Gimp, TTF...
#    FontPath     "/usr/share/lib/X11/fonts/latin2/75dpi"
#    FontPath     "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
#    FontPath     "/usr/share/fonts/Type1"
    RgbPath      "/usr/share/X11/rgb"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc:unscaled"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/100dpi"
    FontPath     "/usr/share/fonts/PEX"
    FontPath     "/usr/share/fonts/cyrillic"
    FontPath     "/usr/share/fonts/ttf/western"
    FontPath     "/usr/share/fonts/ttf/decoratives"
    FontPath     "/usr/share/fonts/truetype"
    FontPath     "/usr/share/fonts/truetype/openoffice"
    FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath     "/usr/share/fonts/latex-ttf-fonts"
    FontPath     "/usr/share/fonts/defoma/CID"
    FontPath     "/usr/share/fonts/defoma/TrueType"
EndSection

Section "Module"

#        Load  "ddc"  # ddc probing of monitor
#    Load  "type1"
    #   Load  "synaptics"
    Load  "dbe"
    Load  "dri"
    Load  "extmod"
    Load  "glx"
    Load  "bitmap" # bitmap-fonts
    Load  "freetype"
#    Load  "record"
EndSection

Section "ServerFlags"
    Option        "AllowMouseOpenFail" "true"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbModel" "logiaccess"
    Option        "XkbLayout" "pl"
    Option        "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option        "Protocol" "ExplorerPS/2"
    Option        "Device" "/dev/input/mouse1"
    Option        "Buttons" "7"
    Option        "ZAxisMapping" "4 5"
    Option        "ButtonMapping" "1 2 3 6 7"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device     "aticonfig-Device[0]"
    Monitor    "aticonfig-Monitor[0]"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

Last edited by Zibi1981 (2008-02-20 10:49:20)

"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."

MSI Raider GE78HX 13VI-032PL

Offline

#2 2008-02-20 06:00:50

quad3d@work
Member
From: Austin, TX
Registered: 2006-12-29
Posts: 81
Website

Re: [SOLVED] fglrx(0): [drm] failed to remove DRM signal handler

cat ~/.xinitrc

?

Offline

#3 2008-02-20 10:48:28

Zibi1981
Member
From: Poland
Registered: 2008-01-31
Posts: 642

Re: [SOLVED] fglrx(0): [drm] failed to remove DRM signal handler

Hello quad3d@work smile Thanks for the interest, but I've already solved this problem. I think it was something with my xorg.conf file, because when I made some changes to it, suddenly all started to work. If You are still interested in the output of the above command, well, here it is

[zibi1981@felipe ~]$ cat ~/.xinitrc
#!/bin/sh

#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
#

# exec gnome-session
# exec startkde
# exec startxfce4
# exec icewm
# exec openbox
# exec blackbox
# exec fluxbox
# exec ratpoison
# exec dwm
# ... or any other WM of your choosing ...
# exec xterm

All the lines are commented, because I use Entrance with appropriate input in /etc/inittab file

[zibi1981@felipe ~]$ cat /etc/inittab
#
# /etc/inittab
#

#  Runlevels:
#    0    Halt
#    1(S)       Single-user
#    2    Not used
#    3    Multi-user
#    4    Not used
#    5    X11
#    6    Reboot

## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:

rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p

# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux

ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/opt/kde/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
x:5:respawn:/usr/sbin/entranced -nodaemon >& /dev/null

# End of file

Anyway, thanks for the interest once more smile

"... being a Linux user is sort of like living in a house inhabited by a large family of carpenters and architects. Every morning when you wake up, the house is a little different. Maybe there is a new turret, or some walls have moved. Or perhaps someone has temporarily removed the floor under your bed."

MSI Raider GE78HX 13VI-032PL

Offline

Pages: 1

Board footer

Powered by FluxBB