You are not logged in.
Pages: 1
I have a new DELL xps M1530
I am trying to boot ubuntu which is loaded in my external USB HDD, I also have grub installed in the external HDD.
I have changed the boot sequence and trying to boot off the external USB HDD but I just see a flash of the grub installed in the external usb drive and the computer boots into the Arch grub installed in my laptops internal HDD.
How can I make the laptop stop doing it.
Also I was using the external HDD ubuntu in my old toshiba laptop and it could easily boot off it.
I have A08 firmware.
DELL XPS 1640 with ATI Mobility Radeon HD 3670. Arch Linux KDE Minimal Install
Offline
Can you post yours menu.lst?
Offline
menu.lst for Grub installed on my external USB drive.
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fd4ceb1c-50e7-43aa-83b0-1cbc7658cc73 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,2)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 8.04, kernel 2.6.24-16-generic
root (hd0,2)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=fd4ceb1c-50e7-43aa-83b0-1cbc7658cc73 ro quiet splash
initrd /boot/initrd.img-2.6.24-16-generic
quiet
title Ubuntu 8.04, kernel 2.6.24-16-generic (recovery mode)
root (hd0,2)
kernel /boot/vmlinuz-2.6.24-16-generic root=UUID=fd4ceb1c-50e7-43aa-83b0-1cbc7658cc73 ro single
initrd /boot/initrd.img-2.6.24-16-generic
title Ubuntu 8.04, kernel 2.6.24-12-generic
root (hd1,2)
kernel /boot/vmlinuz-2.6.24-12-generic root=UUID=fd4ceb1c-50e7-43aa-83b0-1cbc7658cc73 ro quiet splash
initrd /boot/initrd.img-2.6.24-12-generic
quietMenu.lst for the GRUB installed in my laptops internal HDD
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/hda (hd0)
# /dev/hdb2 (hd1,1)
# /dev/hda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro i8042.nomux=1
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro
initrd /boot/kernel26-fallback.img
# (1) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1DELL XPS 1640 with ATI Mobility Radeon HD 3670. Arch Linux KDE Minimal Install
Offline
Pages: 1