Arch Linux

Cornholio

Member

Registered: 2007-09-26

Posts: 38

Ati x1600 and fglrx modules

Hi,
I have a 2.6.25.4 vanilla kernel and I have succesfully compiled fglrx modules.
When I try to load them I get

bash-3.2# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.25.4/video/fglrx.ko): Operation not permitted

bash-3.2# dmesg | tail
[fglrx] Adapter chains initialized successfully!
[fglrx] CF object manager initialized successfully!
[fglrx]   vendor: 1002 device: 71c2 count: 1
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured
[fglrx] PAT is disabled!
[fglrx:firegl_init_module] *ERROR* firegl_stub_register failed
bash-3.2#

Any suggestions?
Thanks
KKnull

Cerebral

Forum Fellow

From: Waterloo, ON, CA

Registered: 2005-04-08

Posts: 3,108

Website

Re: Ati x1600 and fglrx modules

Do you have the 'radeon' or 'drm' kernel modules inserted?  I think they both conflict with fglrx.

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

I have the same problem:

After full update
   yaourt -Syu --aur
i got packages
   kernel26-2.6.25.4-1
   catalyst-8.5-1
Open drivers wae NOT installed on my system.
   lsmod | grep catalyst
   lsmod | grep drm
found nothing

When trying to load
   modprobe fglrx
i got
   FATAL: Error inserting fglrx (/lib/modules/2.6.25-ARCH/video/fglrx.ko): Operation not permitted

and when i start my X my PC freezes and only button that works is the power button.

After recompiling catalyst package via ABS same problem

Probably kernel build bug.
Is there any chance that drm is compiled into kernel not as a module?

Another symptom is that glxgears do not refresh, but frames info is displayed in console.
{EDIT}O_o same thing happends on open drivers (and some one told me he had same problem on nvidia drivers){/EDIT}

Now i use open drivers but .. they suck have 60Hz and my eyes hurt

Last edited by eich (2008-06-05 10:02:24)

Cornholio

Member

Registered: 2007-09-26

Posts: 38

Re: Ati x1600 and fglrx modules

ok, I have solved. I had to disable drm module

eich: past a dmesg | grep fglrx

Last edited by Cornholio (2008-06-05 11:23:24)

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

cat everything.log | grep fglrx

Jun  3 12:42:04 PCFIFR2 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jun  3 12:42:04 PCFIFR2 [fglrx] Adapter chains initialized successfully!
Jun  3 12:42:04 PCFIFR2 [fglrx] CF object manager initialized successfully!
Jun  3 12:42:04 PCFIFR2 [fglrx] PAT is enabled successfully!
Jun  3 12:42:04 PCFIFR2 [fglrx:firegl_stub_getminor] *ERROR* exiting
Jun  3 12:42:04 PCFIFR2 [fglrx:firegl_init_module] *ERROR* firegl_stub_register failed
Jun  3 12:45:14 PCFIFR2 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jun  3 12:45:14 PCFIFR2 [fglrx] Adapter chains initialized successfully!
Jun  3 12:45:14 PCFIFR2 [fglrx] CF object manager initialized successfully!
Jun  3 12:45:14 PCFIFR2 [fglrx] PAT is enabled successfully!
Jun  3 12:45:14 PCFIFR2 [fglrx:firegl_stub_getminor] *ERROR* exiting
Jun  3 12:45:14 PCFIFR2 [fglrx:firegl_init_module] *ERROR* firegl_stub_register failed

Now i have open drivers so my dmesg doesnt spit fglrx errors.
The series of logs above repeats many times.

Last edited by eich (2008-06-05 11:54:10)

Cerebral

Forum Fellow

From: Waterloo, ON, CA

Registered: 2005-04-08

Posts: 3,108

Website

Re: Ati x1600 and fglrx modules

post the un-grepped output of lsmod when you get these errors please

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

I cant do that becose my X will not start when ill uninstal open drivers i can only show you what i have loaded now with 'radeon' loaded via udev

   lsmod

Module                  Size  Used by
ipv6                  256196  8
radeon                127392  2
drm                    72472  3 radeon
psmouse                36880  0
serio_raw               5508  0
ppp_generic            24348  0
pcspkr                  2816  0
ehci_hcd               33804  0
ohci_hcd               21764  0
i2c_piix4               8076  0
i2c_core               19348  1 i2c_piix4
usbcore               129776  3 ehci_hcd,ohci_hcd
shpchp                 29460  0
pci_hotplug            26276  1 shpchp
ati_agp                 7052  1
agpgart                28244  2 drm,ati_agp
sg                     27188  0
evdev                   9472  3
thermal                15260  0
processor              32096  1 thermal
fan                     4356  0
button                  6416  0
battery                10372  0
ac                      4484  0
snd_seq_oss            30336  0
snd_seq_midi_event      6656  1 snd_seq_oss
snd_seq                48432  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6796  2 snd_seq_oss,snd_seq
snd_atiixp             15756  0
snd_ac97_codec         97828  1 snd_atiixp
snd_pcm_oss            38656  0
snd_pcm                68228  3 snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer              19848  2 snd_seq,snd_pcm
snd_page_alloc          8072  2 snd_atiixp,snd_pcm
snd_mixer_oss          14848  1 snd_pcm_oss
snd                    46628  9 snd_seq_oss,snd_seq,snd_seq_device,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore               6496  1 snd
ac97_bus                2048  1 snd_ac97_codec
slhc                    6016  1 ppp_generic
3c59x                  39464  0
mii                     4992  1 3c59x
rtc_cmos                9120  0
rtc_core               15516  1 rtc_cmos
rtc_lib                 2944  1 rtc_core
ext3                  123912  3
jbd                    44052  1 ext3
mbcache                 7172  1 ext3
sr_mod                 15300  0
cdrom                  33952  1 sr_mod
sd_mod                 23320  5
pata_acpi               4992  0
ata_generic             5636  0
pata_atiixp             5760  4
libata                141840  3 pata_acpi,ata_generic,pata_atiixp
scsi_mod               92204  4 sg,sr_mod,sd_mod,libata
dock                    7952  1 libata

Ill update it when ill have some time to play with packages (its my PC at work)

Last edited by eich (2008-06-05 15:04:19)

Cerebral

Forum Fellow

From: Waterloo, ON, CA

Registered: 2005-04-08

Posts: 3,108

Website

Re: Ati x1600 and fglrx modules

Well, as I mentioned earlier, the radeon and drm modules will conflict with fglrx.  However, I'm wondering if there were any other conflicting modules at the time you tried to insert fglrx.

Couldn't you quit X, drop to command line, sudo rmmod radeon; sudo rmmod drm; sudo modprobe fglrx and see if that works?

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

Couldn't you quit X, drop to command line, sudo rmmod radeon; sudo rmmod drm; sudo modprobe fglrx and see if that works?

I need this PC to work and i cant play with packages at the moment and fglrx package conflicts with radeon package.

Ill update this post soon (prolly tomorrow) posting the requested result

Cerebral

Forum Fellow

From: Waterloo, ON, CA

Registered: 2005-04-08

Posts: 3,108

Website

Re: Ati x1600 and fglrx modules

Ill update this post soon (prolly tomorrow) posting the requested result

Fair enough - just add a new post so it shows up in my 'new posts' radar.

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

Sorry for the delay. I had tons of work to do on this PC.

Procedure i used to get the log:
1) pacman -S catalyst
    it removed my libgl package
2) rmmod radeon
3) rmmod drm
4) lsmod | grep catalyst
    returns empty
5) lsmod | grep drm
    returns empty
6) modprobe fglrx
    returns FATAL: Error inserting fglrx (/lib/modules/2.6.25-ARCH/video/fglrx.ko): Operation not permitted
7) dmesg
    returns

Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bf40000 (usable)
 BIOS-e820: 000000003bf40000 - 000000003bf50000 (ACPI data)
 BIOS-e820: 000000003bf50000 - 000000003c000000 (ACPI NVS)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Entering add_active_range(0, 0, 245568) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   245568
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   245568
On node 0 totalpages: 245568
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 126 pages used for memmap
  HighMem zone: 16066 pages, LIFO batch:3
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FADA0, 0021 (r2 ACPIAM)
ACPI: XSDT 3BF40100, 003C (r1 A M I  OEMXSDT   9000505 MSFT       97)
ACPI: FACP 3BF40200, 0081 (r1 A M I  OEMFACP   9000505 MSFT       97)
ACPI: DSDT 3BF40360, 2D1F (r1  P4RVM P4RVM000        0 INTL 20030522)
ACPI: FACS 3BF50000, 0040
ACPI: APIC 3BF40300, 005C (r1 A M I  OEMAPIC   9000505 MSFT       97)
ACPI: OEMB 3BF50040, 0043 (r1 A M I  OEMBIOS   9000505 MSFT       97)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Allocating PCI resources starting at 40000000 (gap: 3c000000:c37c0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243650
Kernel command line: auto BOOT_IMAGE=Arch ro root=805 acpi=noirq
Found and enabled local APIC!
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2660.510 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 968744k/982272k available (2082k kernel code, 13028k reserved, 709k data, 268k init, 64768k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff80000 - 0xfffff000   ( 508 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03bf000 - 0xc0402000   ( 268 kB)
      .data : 0xc0308a48 - 0xc03b9ea0   ( 709 kB)
      .text : 0xc0100000 - 0xc0308a48   (2082 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 5325.20 BogoMIPS (lpj=8872334)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0e28 (from 0c28)
CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 03
Total of 1 processors activated (5325.20 BogoMIPS).
Brought up 1 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  F9, should be F0 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Probing PCI hardware
PCI: Using IRQ router default [1002/434c] at 0000:00:14.3
PCI: Cannot allocate resource region 7 of bridge 0000:00:14.4
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:06: ioport range 0x228-0x22f has been reserved
system 00:07: ioport range 0x40b-0x40b has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x4d6-0x4d6 has been reserved
system 00:07: ioport range 0xf40-0xf41 has been reserved
system 00:07: ioport range 0xc00-0xc01 has been reserved
system 00:07: ioport range 0xc14-0xc14 has been reserved
system 00:07: ioport range 0xc50-0xc52 has been reserved
system 00:07: ioport range 0xc6c-0xc6c has been reserved
system 00:07: ioport range 0xc6f-0xc6f has been reserved
system 00:07: ioport range 0xcd6-0xcd7 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: iomem range 0xffb00000-0xffffffff could not be reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x3bffffff could not be reserved
system 00:0c: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: 0xfd700000-0xfdafffff
  PREFETCH window: 0x00000000dfe00000-0x00000000efdfffff
PCI: Bridge: 0000:00:14.4
  IO window: disabled.
  MEM window: 0xfdb00000-0xfe2fffff
  PREFETCH window: 0x0000000040000000-0x00000000400fffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 536k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Setting latency timer of device 0000:00:14.1 to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Switched to high resolution mode on CPU 0
ata1.00: ATA-6: ST360015A, 3.33, max UDMA/100
ata1.00: 117231408 sectors, multi 16: LBA 
ata1.00: configured for UDMA/100
ata2.00: ATAPI: IDE/ATAPI CD-ROM 50XS, T5A6, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST360015A        3.33 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            ATAPI    CD-ROM 50X       T5A6 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<4>Driver 'sr' needs updating - please use bus_type methods
 sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 11x/11x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
3c59x: Donald Becker and others.
0000:02:06.0: 3Com PCI 3c905B Cyclone 100baseTx at f8824000.
0000:02:08.0: 3Com PCI 3c920B-EMB-WNM (ATI Radeon 9100 IGP) at f8878000.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: ACPI0007:00 is registered as cooling_device0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
agpgart: Detected Ati IGP9100/M chipset
agpgart: AGP aperture is 128M @ 0xf0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 10, io mem 0xfe900000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 10, io mem 0xfea00000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 10, io mem 0xfeb00000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
input: PC Speaker as /class/input/input4
PPP generic driver version 2.4.2
input: ImPS/2 Generic Wheel Mouse as /class/input/input5
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 995988k swap on /dev/sda1.  Priority:-1 extents:1 across:995988k
eth0:  setting full-duplex.
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
spurious 8259A interrupt: IRQ7.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
mtrr: no MTRR for e0000000,4000000 found
[drm] Module unloaded
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[fglrx] Adapter chains initialized successfully!
[fglrx] CF object manager initialized successfully!
[fglrx] PAT is enabled successfully!
[fglrx:firegl_stub_getminor] *ERROR* exiting
[fglrx:firegl_init_module] *ERROR* firegl_stub_register failed

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

Okay...
You guys are not going to like this

The solution was on http://forum.arch-linux.pl/viewtopic.php?id=1813

Original

Trzeba bylo wyłączyć drm z kernela utworzyć moduły agpgart i nvidia-agp bo gdy były wgrane w jadra nie chciały działać poprawnie potem instalacja sterowników na nowo i wszystko gra i buczy wink

Translation

You need to disable drm from kernel, create modules agpart and nvidia-agp, because they didn't work as a part of the kernel, then reinstall drivers ant its working

Personaly i would say it's a kernel bug.

Cerebral

Forum Fellow

From: Waterloo, ON, CA

Registered: 2005-04-08

Posts: 3,108

Website

Re: Ati x1600 and fglrx modules

If it were a kernel bug, though, you'd think that everyone would have this issue.  Odd..

eich

Member

Registered: 2007-11-09

Posts: 11

Re: Ati x1600 and fglrx modules

My bad.
That solution is for kernel26thinkpad.
I have kernel26.
Fglrx still doesn't work.