You are not logged in.

#1 2008-06-26 11:25:57

szajskerl
Member
Registered: 2008-03-23
Posts: 13

sony ericsson via irda @ wammu

The irda connection in wammu used to work a long time ago but it does not any more... My phone is "visible" in the system as:

root /proc/net/irda  #  cat /proc/net/irda/discovery 
IrLMP: Discovery log:

nickname: T630-T628, hint: 0x9124, saddr: 0xa2158494, daddr: 0x35fd0fe7

on the other hand I cannot set the connection in wammu... Why is that?

root /home/filip  #  cat wammu.log 

--------------- System information ----------------
Platform     linux2
Python       2.5.2
wxPython     2.8.7.1
Wammu        0.27
python-gammu 0.26
Gammu        1.20.0
Bluetooth    None
locales      pl_PL (ISO8859-2)
connection   at19200
device       /dev/ttyS0
model        
Thu 2008/06/26 13:19:50: [Gammu            - 1.20.0 built 09:23:21 May 13 2008 using GCC 4.3]
Thu 2008/06/26 13:19:50: [Connection       - "at19200"]
Thu 2008/06/26 13:19:50: [Connection index - 0]
Thu 2008/06/26 13:19:50: [Model type       - ""]
Thu 2008/06/26 13:19:50: [Device           - "/dev/ircomm0"]
Thu 2008/06/26 13:19:50: [Runing on        - Linux, kernel 2.6.25-ARCH (#1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008)]
Thu 2008/06/26 13:19:50: [System error     - open in serial_open, 2, "Nie ma takiego pliku ani katalogu"]
Thu 2008/06/26 13:19:50: Init:GSM_TryGetModel failed with error DEVICENOTEXIST[4]: Error opening device, it doesn't exist.
Thu 2008/06/26 13:19:50: Entering GSM_SetIncomingSMS
Thu 2008/06/26 13:19:50: Entering GSM_SetIncomingCall
Thu 2008/06/26 13:19:50: Entering GSM_SetIncomingCB
Thu 2008/06/26 13:19:50: Entering GSM_SetIncomingUSSD
Thu 2008/06/26 13:20:07: [Gammu            - 1.20.0 built 09:23:21 May 13 2008 using GCC 4.3]
Thu 2008/06/26 13:20:07: [Connection       - "at19200"]
Thu 2008/06/26 13:20:07: [Connection index - 0]
Thu 2008/06/26 13:20:07: [Model type       - ""]
Thu 2008/06/26 13:20:07: [Device           - "/dev/ttyS0"]
Thu 2008/06/26 13:20:07: [Runing on        - Linux, kernel 2.6.25-ARCH (#1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008)]
Thu 2008/06/26 13:20:07: [System error     - tcflush in serial_open, 22, "Z\u0142y argument"]
Thu 2008/06/26 13:20:07: Init:GSM_TryGetModel failed with error DEVICEOPENERROR[2]: Error opening device. Unknown/busy or no permissions.
Thu 2008/06/26 13:20:07: Entering GSM_SetIncomingSMS
Thu 2008/06/26 13:20:07: Entering GSM_SetIncomingCall
Thu 2008/06/26 13:20:07: Entering GSM_SetIncomingCB
Thu 2008/06/26 13:20:07: Entering GSM_SetIncomingUSSD

I do not have permissions even if I am root? As far as I am concerned my irda device is /dev/ttyS0:

root /proc/net/irda  #  cat irlap
irlap0 state: LAP_NDM
  device name: irda0, hardware name: ttyS0
  caddr: 0xc4, saddr: 0xa2158494, daddr: 0x000000
  win size: 0, win: 0, line capacity: 0, bytes left: 0
  tx queue len: 0 win queue len: 0 rbusy: FALSE mbusy: FALSE
  retrans: 0 vs: 0 vr: 0 va: 0
  qos    bps    maxtt    dsize    winsize    addbofs    mintt    ldisc    comp
  tx    9600    0    64    1    12    0    0    
  rx    9600    0    64    1    12    0    0

Offline

Board footer

Powered by FluxBB