You are not logged in.

Pages: 1

#1 2008-07-12 14:45:56

Nuck
Member
From: Finland
Registered: 2008-02-23
Posts: 4

[SOLVED] VMware player, network doesn't work

Hi!

I installed VMware player through AUR and it works well. But when I started my vm (Debian 4.0) it asked if I had copied or moved it. I chose "I copied it" because I copied it from my hdd to external hdd. I started my vm but network didn't work. I configured network using vmware-config.pl file like it recommended (vmnet0 as bridged with my wlan0 and vmnet8 as NAT. I also chose to use host-only networking in my vm's (wmaster0)). How did you guys configured your network succesfully?

I just want it to work like on my windows box. It has it's own IP and I can connect to it's IP directly from firefox. Yeah, I run webserver on that vm.

My ifconfig:

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:656 errors:0 dropped:0 overruns:0 frame:0
          TX packets:656 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:24109 (23.5 Kb)  TX bytes:24109 (23.5 Kb)

vmnet1    Link encap:Ethernet  HWaddr 00:50:56:C0:00:01
          inet addr:172.16.22.1  Bcast:172.16.22.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vmnet8    Link encap:Ethernet  HWaddr 00:50:56:C0:00:08
          inet addr:172.16.43.1  Bcast:172.16.43.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wlan0     Link encap:Ethernet  HWaddr 00:1B:77:04:D4:D0
          inet addr:192.168.0.20  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:77ff:fe04:d4d0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22719 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14300 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:14584732 (13.9 Mb)  TX bytes:2004755 (1.9 Mb)

wmaster0  Link encap:UNSPEC  HWaddr 00-1B-77-04-D4-D0-00-00-00-00-00-00-00-00-00-00
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Last edited by Nuck (2008-07-12 18:27:49)

Offline

#2 2008-07-12 17:00:40

DonVla
Member
From: Bonn, Germany
Registered: 2007-06-07
Posts: 997

Re: [SOLVED] VMware player, network doesn't work

Nuck wrote:

Hi!

I installed VMware player through AUR and it works well. But when I started my vm (Debian 4.0) it asked if I had copied or moved it. I chose "I copied it" because I copied it from my hdd to external hdd. I started my vm but network didn't work. I configured network using vmware-config.pl file like it recommended (vmnet0 as bridged with my wlan0 and vmnet8 as NAT. I also chose to use host-only networking in my vm's (wmaster0)). How did you guys configured your network succesfully?

I just want it to work like on my windows box. It has it's own IP and I can connect to it's IP directly from firefox. Yeah, I run webserver on that vm.

My ifconfig:

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:656 errors:0 dropped:0 overruns:0 frame:0
          TX packets:656 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:24109 (23.5 Kb)  TX bytes:24109 (23.5 Kb)

vmnet1    Link encap:Ethernet  HWaddr 00:50:56:C0:00:01
          inet addr:172.16.22.1  Bcast:172.16.22.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vmnet8    Link encap:Ethernet  HWaddr 00:50:56:C0:00:08
          inet addr:172.16.43.1  Bcast:172.16.43.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wlan0     Link encap:Ethernet  HWaddr 00:1B:77:04:D4:D0
          inet addr:192.168.0.20  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:77ff:fe04:d4d0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22719 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14300 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:14584732 (13.9 Mb)  TX bytes:2004755 (1.9 Mb)

wmaster0  Link encap:UNSPEC  HWaddr 00-1B-77-04-D4-D0-00-00-00-00-00-00-00-00-00-00
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

set the network connection to NAT not BRIDGE (in the settings tab). i never got BRIDGE running, but i also haven't tried too hard.

Last edited by DonVla (2008-07-12 17:01:31)

Offline

#3 2008-07-12 18:26:56

Nuck
Member
From: Finland
Registered: 2008-02-23
Posts: 4

Re: [SOLVED] VMware player, network doesn't work

Oh, I didn't even notice that menu. But that didn't do the trick. My real problem was that I had wrong interface selected at /etc/network/interfaces. I just changed eth0 to eth1 and it started to work. Thanks for the tip!

Last edited by Nuck (2008-07-12 18:27:11)

Offline

Pages: 1

Board footer

Powered by FluxBB