|Solved| - Screen resolution and nVidia

Nomearod · 2008-07-22 21:37:53

I installed arch, xorg, nvidia's drives, openbox and gnome.

I can run gnome and openbox without any problem, however, my screen resolution isn't recognised. Here's my /etc/X11/xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Thu Jun  5 00:08:24 PDT 2008

# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of 
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen         "Screen 1" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
#    RgbPath    "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 
#    FontPath   "/usr/share/fonts/TTF"
#    FontPath   "/usr/share/fonts/Type1"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"
# The module search path.  The default path is shown here.
#    ModulePath "/usr/lib/modules"
    FontPath        "/usr/share/fonts/misc"
    FontPath        "/usr/share/fonts/100dpi:unscaled"
    FontPath        "/usr/share/fonts/75dpi:unscaled"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
#    Load        "type1"
# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
    Load           "dbe"      # Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "freetype"
#    Load        "xtt"
    Load           "glx"
EndSection

Section "InputDevice"

#    Option    "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "logicd"
    Option         "XkbLayout" "pt"
    Option         "XkbVariant" "pt"
EndSection

Section "InputDevice"

# Identifier and driver
#    Option "Resolution"    "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"    "9600"
#    Option "SampleRate"    "150"
# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "Auto"    # Auto detect
    Option         "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
    Option         "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync    30-64         # multisync
#    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       80.0 - 80.0
    VertRefresh     75.0
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset    "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam    256
#    Clocks    25.2 28.3
    Identifier     "Standard VGA"
    Driver         "nvidia"
    VendorName     "Unknown"
    BoardName      "Unknown"
EndSection

Section "Device"

    # unsupported card
    #VideoRam    319488
    # Insert Clocks lines here if appropriate
    Identifier     "My Video Card"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Screen 1"
    Device         "My Video Card"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       8
        Modes      "1440x900"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
        Modes      "1440x900"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
        Modes      "1440x900"
    EndSubSection
EndSection

If I run "xorgconfig" and after that "nvidia-xconfig", my screen resolution is 1024x860, but after changed very mode to my native resolution ("1440x900"), is changes to "800x600".

Last edited by Nomearod (2008-07-23 09:19:07)

heleos · 2008-07-22 21:58:50

Widescreen resolutions are not possible with newest vista and linux drivers if the tft is connected with dvi.

Use an older driver or the vga-port instead.  
There are maybe some hacks, but I tried many times in vista and linux. And it's always the same, only 1280x1024.

did some googling:
http://forums.nvidia.com/lofiversion/in … 20005.html

Nomearod · 2008-07-22 22:04:53

heleos wrote:

Widescreen resolutions are not possible with newest vista and linux drivers if the tft is connected with dvi.

Use an older driver or the vga-port instead.  
There are maybe some hacks, but I tried many times in vista and linux. And it's always the same, only 1280x1024.

did some googling:
http://forums.nvidia.com/lofiversion/in … 20005.html

Thanks for the reply, but I don't believe that's the problem since that topic is from 2006 and I didn't had any problems last time I instaled arch (3 months ago).

heleos · 2008-07-22 22:33:40

Hmmm, didn't even bother to check the date, sorry

What card are you using?

Nomearod · 2008-07-23 06:48:12

heleos wrote:

Hmmm, didn't even bother to check the date, sorry
What card are you using?

Nvidia 8800 GTS 320 MB.

Nomearod · 2008-07-23 09:21:01

Problems solved.

Only needed to change "HorizSync" and "VertRefresh" from 80 and 75, to "30.0-130.0" and "50.0-100.0".

Arch Linux

#1 2008-07-22 21:37:53

|Solved| - Screen resolution and nVidia

#2 2008-07-22 21:58:50

Re: |Solved| - Screen resolution and nVidia

#3 2008-07-22 22:04:53

Re: |Solved| - Screen resolution and nVidia

#4 2008-07-22 22:33:40

Re: |Solved| - Screen resolution and nVidia

#5 2008-07-23 06:48:12

Re: |Solved| - Screen resolution and nVidia

#6 2008-07-23 09:21:01

Re: |Solved| - Screen resolution and nVidia

Board footer