You are not logged in.

#4151 2012-07-19 19:43:51

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

NiteiaTt wrote:
cabutan wrote:

Now when I run the script to remove the watermark, it kills my catalyst and I get a segmentation error. So I had to reinstall catalyst and I have that annoying watermark

Does it kill it right away? or until you logout/reboot ?

Until I reboot or logout. Not right away.

Offline

#4152 2012-07-19 19:49:00

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:
NiteiaTt wrote:
cabutan wrote:

Now when I run the script to remove the watermark, it kills my catalyst and I get a segmentation error. So I had to reinstall catalyst and I have that annoying watermark

Does it kill it right away? or until you logout/reboot ?

Until I reboot or logout. Not right away.

It kills fglrx or Xorg?
Do you get a log, error report or something?

Offline

#4153 2012-07-19 19:50:36

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

it kills Xorg.

Fatal server error:
[   617.328] Caught signal 11 (Segmentation fault). Server aborting
[   617.328]
[   617.328]
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
[   617.328] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   617.328]

Offline

#4154 2012-07-19 19:53:39

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

what version of Xorg are you using...? The one from [xorg111] or the one from [extra] ?

Offline

#4155 2012-07-19 19:55:35

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

xorg 1.12

Offline

#4156 2012-07-19 19:58:44

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

maybe a little bit more from /var/log/Xorg.0.log can tell us something.
Try sharing from where the WWs start

Offline

#4157 2012-07-19 20:08:07

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

Here it goes:   

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.242] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 19 13:17:23 2012
[    25.242] (==) Using config file: "/etc/X11/xorg.conf"
[    25.242] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.243] (==) ServerLayout "aticonfig Layout"
[    25.243] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    25.243] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    25.243] (**) |   |-->Device "aticonfig-Device[0]-0"
[    25.243] (==) Automatically adding devices
[    25.243] (==) Automatically enabling devices
[    25.243] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    25.243]     Entry deleted from font path.
[    25.243] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    25.243]     Entry deleted from font path.
[    25.243]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    25.243] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    25.243]     Entry deleted from font path.
[    25.243]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    25.243] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[    25.243] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.244] (**) Extension "Composite" is enabled
[    25.244] (WW) Ignoring unrecognized extension "AccelDFS"
[    25.244] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.244] (II) Loader magic: 0x7c8b00
[    25.244] (II) Module ABI versions:
[    25.244]     X.Org ANSI C Emulation: 0.4
[    25.244]     X.Org Video Driver: 12.0
[    25.244]     X.Org XInput driver : 16.0
[    25.244]     X.Org Server Extension : 6.0
[    25.245] (--) PCI:*(0:0:1:0) 1002:9641:1025:0599 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/262144, I/O @ 0x00002000/256
[    25.246] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    25.246] (II) "extmod" will be loaded by default.
[    25.246] (II) "dbe" will be loaded by default.
[    25.246] (II) "glx" will be loaded by default.
[    25.246] (II) "record" will be loaded by default.
[    25.246] (II) "dri" will be loaded by default.
[    25.246] (II) "dri2" will be loaded by default.
[    25.246] (II) LoadModule: "extmod"
[    25.246] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    25.246] (II) Module extmod: vendor="X.Org Foundation"
[    25.246]     compiled for 1.12.3, module version = 1.0.0
[    25.246]     Module class: X.Org Server Extension
[    25.246]     ABI class: X.Org Server Extension, version 6.0
[    25.246] (II) Loading extension MIT-SCREEN-SAVER
[    25.246] (II) Loading extension XFree86-VidModeExtension
[    25.246] (II) Loading extension XFree86-DGA
[    25.246] (II) Loading extension DPMS
[    25.246] (II) Loading extension XVideo
[    25.247] (II) Loading extension XVideo-MotionCompensation
[    25.247] (II) Loading extension X-Resource
[    25.247] (II) LoadModule: "dbe"
[    25.247] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    25.247] (II) Module dbe: vendor="X.Org Foundation"
[    25.247]     compiled for 1.12.3, module version = 1.0.0
[    25.247]     Module class: X.Org Server Extension
[    25.247]     ABI class: X.Org Server Extension, version 6.0
[    25.247] (II) Loading extension DOUBLE-BUFFER
[    25.247] (II) LoadModule: "glx"
[    25.247] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.247] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    25.247]     compiled for 6.9.0, module version = 1.0.0
[    25.247] (II) Loading extension GLX
[    25.247] (II) LoadModule: "record"
[    25.247] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    25.247] (II) Module record: vendor="X.Org Foundation"
[    25.247]     compiled for 1.12.3, module version = 1.13.0
[    25.247]     Module class: X.Org Server Extension
[    25.247]     ABI class: X.Org Server Extension, version 6.0
[    25.247] (II) Loading extension RECORD
[    25.247] (II) LoadModule: "dri"
[    25.248] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    25.248] (II) Module dri: vendor="X.Org Foundation"
[    25.248]     compiled for 1.12.3, module version = 1.0.0
[    25.248]     ABI class: X.Org Server Extension, version 6.0
[    25.248] (II) Loading extension XFree86-DRI
[    25.248] (II) LoadModule: "dri2"
[    25.248] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.248] (II) Module dri2: vendor="X.Org Foundation"
[    25.248]     compiled for 1.12.3, module version = 1.2.0
[    25.248]     ABI class: X.Org Server Extension, version 6.0
[    25.248] (II) Loading extension DRI2
[    25.248] (II) LoadModule: "fglrx"
[    25.248] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    25.248]
[    25.248] Backtrace:
[    25.248] 0: /usr/bin/X (xorg_backtrace+0x36) [0x560306]
[    25.248] 1: /usr/bin/X (0x400000+0x164039) [0x564039]
[    25.248] 2: /lib/libpthread.so.0 (0x7f41791d7000+0xf170) [0x7f41791e6170]
[    25.248] 3: /lib/ld-linux-x86-64.so.2 (0x7f4179c8e000+0xb56a) [0x7f4179c9956a]
[    25.248] 4: /lib/ld-linux-x86-64.so.2 (0x7f4179c8e000+0x12c0a) [0x7f4179ca0c0a]
[    25.248] 5: /lib/ld-linux-x86-64.so.2 (0x7f4179c8e000+0xe786) [0x7f4179c9c786]
[    25.248] 6: /lib/ld-linux-x86-64.so.2 (0x7f4179c8e000+0x123bc) [0x7f4179ca03bc]
[    25.248] 7: /lib/libdl.so.2 (0x7f41795fc000+0x1026) [0x7f41795fd026]
[    25.248] 8: /lib/ld-linux-x86-64.so.2 (0x7f4179c8e000+0xe786) [0x7f4179c9c786]
[    25.248] 9: /lib/libdl.so.2 (0x7f41795fc000+0x15fc) [0x7f41795fd5fc]
[    25.248] 10: /lib/libdl.so.2 (dlopen+0x31) [0x7f41795fd0c1]
[    25.248] 11: /usr/bin/X (0x400000+0x62254) [0x462254]
[    25.248] 12: /usr/bin/X (0x400000+0x64125) [0x464125]
[    25.248] 13: /usr/bin/X (xf86LoadModules+0xaa) [0x47276a]
[    25.248] 14: /usr/bin/X (InitOutput+0x62a) [0x472e0a]
[    25.248] 15: /usr/bin/X (0x400000+0x23476) [0x423476]
[    25.249] 16: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4178086725]
[    25.249] 17: /usr/bin/X (0x400000+0x238ed) [0x4238ed]
[    25.249]
[    25.249] Segmentation fault at address 0x8
[    25.249]
Fatal server error:
[    25.249] Caught signal 11 (Segmentation fault). Server aborting
[    25.249]
[    25.249]
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
[    25.249] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    25.249]

Offline

#4158 2012-07-19 20:19:20

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:

Here it goes:   

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.242] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 19 13:17:23 2012
[    25.242] (==) Using config file: "/etc/X11/xorg.conf"
[    25.242] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.243] (==) ServerLayout "aticonfig Layout"
[    25.243] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
...

Did you run catalyst_build_module as root?
If so, you should run it as normal user.
Try uninstalling the current catalyst by executing
sudo catalyst_build_module remove_all
Then reboot, and go into single user mode (it's not necessary, just to be sure)
type
login

enter your username
and your password
and then run

catalyst_build_module $(uname -r)

Offline

#4159 2012-07-19 20:20:52

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

NiteiaTt wrote:
cabutan wrote:

Here it goes:   

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.242] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 19 13:17:23 2012
[    25.242] (==) Using config file: "/etc/X11/xorg.conf"
[    25.242] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.243] (==) ServerLayout "aticonfig Layout"
[    25.243] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
...

Did you run catalyst_build_module as root?
If so, you should run it as normal user.
Try uninstalling the current catalyst by executing
sudo catalyst_build_module remove_all
Then reboot, and go into single user mode (it's not necessary, just to be sure)
type
login

enter your username
and your password
and then run

catalyst_build_module $(uname -r)

Oh yes, ran it as regular user. But will try again as said. Thanks!!

Offline

#4160 2012-07-19 20:28:47

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

This is what I get:

==> Compiling fglrx module ...
make: Entering directory `/usr/src/linux-3.4.5-1-ARCH'
  CC [M]  /tmp/catalyst.hCqNXn/src/firegl_public.o
  CC [M]  /tmp/catalyst.hCqNXn/src/kcl_acpi.o
  CC [M]  /tmp/catalyst.hCqNXn/src/kcl_agp.o
  CC [M]  /tmp/catalyst.hCqNXn/src/kcl_debug.o
  CC [M]  /tmp/catalyst.hCqNXn/src/kcl_ioctl.o
/tmp/catalyst.hCqNXn/src/kcl_ioctl.c: In function ‘KCL_IOCTL_AllocUserSpace32’:
/tmp/catalyst.hCqNXn/src/kcl_ioctl.c:226:5: error: implicit declaration of function ‘compat_alloc_user_space’ [-Werror=implicit-function-declaration]
/tmp/catalyst.hCqNXn/src/kcl_ioctl.c:226:24: warning: initialization makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors
make[1]: *** [/tmp/catalyst.hCqNXn/src/kcl_ioctl.o] Error 1
make: *** [_module_/tmp/catalyst.hCqNXn/src] Error 2
make: Leaving directory `/usr/src/linux-3.4.5-1-ARCH'
==> ERROR: A failure occurred in build().

Offline

#4161 2012-07-19 20:37:22

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:

This is what I get:

==> Compiling fglrx module ...
make: Entering directory `/usr/src/linux-3.4.5-1-ARCH'
  CC [M]  /tmp/catalyst.hCqNXn/src/firegl_public.o
  CC [M]  /tmp/catalyst.hCqNXn/src/kcl_acpi.o
...

and we're back at the beginning.
That's odd, we have the same hardware.
have you tried with the propietary driver from ATI?
Or downgrading linux?
Let's do something: if your problem is that you can't build your module, and we have the exact same 6620G, what if I roll to you a pre-compiled package?

Offline

#4162 2012-07-19 20:38:53

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

Lets try it. I dont feel like downgrading linux. Worst case, I will use it with the watermark until I find a solution. But lets try a precompile one..I appreciate your help, you have no idea.

Offline

#4163 2012-07-19 20:45:15

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:

Lets try it. I dont feel like downgrading linux. Worst case, I will use it with the watermark until I find a solution. But lets try a precompile one..I appreciate your help, you have no idea.

No problem, I've been in the same place.
That's what the community is for ;D
I'll e-mail the link to you

Offline

#4164 2012-07-19 20:46:51

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

NiteiaTt wrote:
cabutan wrote:

Lets try it. I dont feel like downgrading linux. Worst case, I will use it with the watermark until I find a solution. But lets try a precompile one..I appreciate your help, you have no idea.

No problem, I've been in the same place.
That's what the community is for ;D
I'll e-mail the link to you

Perfect. Thanks!  smile

Offline

#4165 2012-07-19 20:51:46

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

Got the same error or sort of

make[1]: *** [/tmp/catalyst.hCqNXn/src/kcl_ioctl.o] Error 1
make: *** [_module_/tmp/catalyst.hCqNXn/src] Error 2
make: Leaving directory `/usr/src/linux-3.4.5-1-ARCH'

unbelievable eh!!!?? haaaaa..   smile  all good. I will keep trying. Its been nice trying it as it has kept me off from work  smile  Thanks!!

Offline

#4166 2012-07-19 20:58:00

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:

Got the same error or sort of

make[1]: *** [/tmp/catalyst.hCqNXn/src/kcl_ioctl.o] Error 1
make: *** [_module_/tmp/catalyst.hCqNXn/src] Error 2
make: Leaving directory `/usr/src/linux-3.4.5-1-ARCH'

unbelievable eh!!!?? haaaaa..   smile  all good. I will keep trying. Its been nice trying it as it has kept me off from work  smile  Thanks!!

How's that even possible? Nothing should be built when installing it...
It's nice to see you look at the bright side smile

Offline

#4167 2012-07-19 21:01:41

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

NiteiaTt wrote:
cabutan wrote:

Got the same error or sort of

make[1]: *** [/tmp/catalyst.hCqNXn/src/kcl_ioctl.o] Error 1
make: *** [_module_/tmp/catalyst.hCqNXn/src] Error 2
make: Leaving directory `/usr/src/linux-3.4.5-1-ARCH'

unbelievable eh!!!?? haaaaa..   smile  all good. I will keep trying. Its been nice trying it as it has kept me off from work  smile  Thanks!!

How's that even possible? Nothing should be built when installing it...
It's nice to see you look at the bright side smile

You are right! I dont get it either. It is building it?? Maybe there is something else wrong in my system..package pacman related???

Offline

#4168 2012-07-19 21:07:53

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: The AMD/ATI Bar & Grill

cabutan wrote:
NiteiaTt wrote:
cabutan wrote:

Got the same error or sort of

make[1]: *** [/tmp/catalyst.hCqNXn/src/kcl_ioctl.o] Error 1
make: *** [_module_/tmp/catalyst.hCqNXn/src] Error 2
make: Leaving directory `/usr/src/linux-3.4.5-1-ARCH'

unbelievable eh!!!?? haaaaa..   smile  all good. I will keep trying. Its been nice trying it as it has kept me off from work  smile  Thanks!!

How's that even possible? Nothing should be built when installing it...
It's nice to see you look at the bright side smile

You are right! I dont get it either. It is building it?? Maybe there is something else wrong in my system..package pacman related???

I would suggest copying the module manually, and running the install script separately, but that's not sane nor safe.
At least, that's what I desperately do in case nothing else is working.
And, what if something is wrong with your make?
Try reinstalling it to see what happens
Reinstall auto-make cmake make

Offline

#4169 2012-07-19 21:20:16

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

NiteiaTt wrote:
cabutan wrote:
NiteiaTt wrote:

How's that even possible? Nothing should be built when installing it...
It's nice to see you look at the bright side smile

You are right! I dont get it either. It is building it?? Maybe there is something else wrong in my system..package pacman related???

I would suggest copying the module manually, and running the install script separately, but that's not sane nor safe.
At least, that's what I desperately do in case nothing else is working.
And, what if something is wrong with your make?
Try reinstalling it to see what happens
Reinstall auto-make cmake make

A no go. Tried all that..plus removed all drivers, modules you name it haaa.. its ok..Arch has never been broken like this for me before.. I had that glibc problem, fixed it, upgraded the system and ever since, the ati driver has not worked...oh well it works with the repo package and with the watermark. Thanks!

Offline

#4170 2012-07-20 11:49:59

davidovitch
Member
From: Copenhagen
Registered: 2011-02-02
Posts: 31
Website

Re: The AMD/ATI Bar & Grill

Cabutan, I have no idea if it has anything to do with at all, just shooting blind here. Do you have multilibs from gcc, gcc-libs installed? When dealing with the glibc upgrade, I had to replace the multilibs with the x64 versions before moving forward. Since you say the issue came up after glibc I thought to better mention it, even if it sounds silly smile

[edit: spelling]

Last edited by davidovitch (2012-07-20 11:52:01)

Offline

#4171 2012-07-20 14:07:17

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: The AMD/ATI Bar & Grill

@cabutan:
it's looking like 3.4.patch was not applied.
To check what really happened enter /tmp/catalyst.<random_chars> directory and look at kcl_ioctl.c file (were lines from 3.4.patch added?)

Offline

#4172 2012-07-20 17:06:49

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

davidovitch wrote:

Cabutan, I have no idea if it has anything to do with at all, just shooting blind here. Do you have multilibs from gcc, gcc-libs installed? When dealing with the glibc upgrade, I had to replace the multilibs with the x64 versions before moving forward. Since you say the issue came up after glibc I thought to better mention it, even if it sounds silly smile

[edit: spelling]

will check and report. Thanks!

Offline

#4173 2012-07-20 17:07:28

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

@cabutan:
it's looking like 3.4.patch was not applied.
To check what really happened enter /tmp/catalyst.<random_chars> directory and look at kcl_ioctl.c file (were lines from 3.4.patch added?)

Thanks for the help. What exactly should I be looking for? 3.4.patch word??

Will report

Offline

#4174 2012-07-20 19:34:12

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: The AMD/ATI Bar & Grill

@cabutan:
these lines:

#ifndef CONFIG_X86_X32
DEFINE_PER_CPU(unsigned long, old_rsp);
#endif

Last edited by Vi0L0 (2012-07-20 19:35:06)

Offline

#4175 2012-07-20 19:40:16

cabutan
Member
Registered: 2012-07-18
Posts: 31

Re: The AMD/ATI Bar & Grill

ok, got it working. It was all the infamous glibc update.. Instead of fixing the problem back then, I downgraded glibc and for some reason, things wouldnt compile or packages couldnt get installed. Thanks again for all the help. Cheers

Offline

Board footer

Powered by FluxBB