You are not logged in.

#1751 2010-04-25 13:07:58

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: The AMD/ATI Bar & Grill

I have installed catalyst-test+xorg (from extra)+ kernel26-rc (2.6.34-rc5-rc) on my Dell 1555 (ATI 4570).
Al is work ok, except resume from suspend (I get a black screen on resume)
With catalyst-10.1-10.3 (kernel < 2.6.34) all is working but when resume from suspend temperature is 0C and fan is stopped.
Is some way to make suspend/restore to work with catalyst-test?

Last edited by mits (2010-04-25 17:47:20)

Offline

#1752 2010-04-25 16:29:46

Marenz
Member
Registered: 2008-06-22
Posts: 48

Re: The AMD/ATI Bar & Grill

I can't install catalyst-test-xorg18 from the repository:

:: Empfange Pakete von catalyst-test-xorg18...
--2010-04-25 18:20:02--  http://dl.dropbox.com/u/4321633/repo/ca … pkg.tar.xz
Auflösen des Hostnamen »dl.dropbox.com«.... 174.129.33.159, 174.129.212.16, 174.129.242.127, ...
Verbindungsaufbau zu dl.dropbox.com|174.129.33.159|:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 500 Internal Server Error
2010-04-25 18:20:03 FEHLER 500: Internal Server Error.

Warnung: Konnte manche Dateien von catalyst-test-xorg18 nicht übertragen
Fehler: Konnte den Vorgang (Fehler beim Aufruf eines externen Downloaders) nicht durchführen
Fehler sind aufgetreten, keine Pakete wurden aktualisiert.

Offline

#1753 2010-04-25 16:31:14

Marenz
Member
Registered: 2008-06-22
Posts: 48

Re: The AMD/ATI Bar & Grill

Okay, now it worked, disregard last post.

--Marenz

Offline

#1754 2010-04-25 17:58:34

mouse256
Member
From: Antwerpen, Belgium
Registered: 2005-08-24
Posts: 247

Re: The AMD/ATI Bar & Grill

Mits: I have the same issue with the same laptop (dell 1555)
Currently using catalyst 9.12, kernel 2.6.32, suspend works, but temperate after resume is O° and fan speed is not adjusted anymore, thus resulting the laptop going into a thermal protection if causing too much load.

I did not try catalyst-test, I'm eager to see how to get it fixed

Offline

#1755 2010-04-25 18:09:17

mDuo13
Member
Registered: 2010-04-25
Posts: 90

Re: The AMD/ATI Bar & Grill

@snack, Thanks for the tip, but being as I don't know much about how to read xorg.conf it seems tough to use. In the meantime I found a way to make amdcccle work again - there's a way to disable xRandR 1.2. After doing that, Catalyst stops segfaulting and I can set up my big desktop.

Now I'm just having one more weeeeeiird problem, which is that when set to 1920x1080 (supposedly its native resolution) my LG FLATRON M237WD displays everything with big black borders. Fidding with the monitor display modes ("Just Scan", "Set by Program", "16:9") can change the size of them but they won't go away entirely. That weird part is that I get small to nonexistant borders when I use amdcccle to set the resolution to a non-native one like 1680x1050. Documentation on this monitor seems pretty slim, to say the least, so I'm pretty confused.

P.S. I'm using HDMI right now - haven't tried any other cable types since I don't have any on hand and the 5770 only has 3 outputs (2 HDMI, one DVI, the latter of which is being used by my other monitor).

Last edited by mDuo13 (2010-04-25 18:11:58)

Offline

#1756 2010-04-25 23:19:44

timong
Member
From: Budapest, HU
Registered: 2007-02-20
Posts: 91
Website

Re: The AMD/ATI Bar & Grill

mDuo13 wrote:

P.S. I'm using HDMI right now - haven't tried any other cable types since I don't have any on hand and the 5770 only has 3 outputs (2 HDMI, one DVI, the latter of which is being used by my other monitor).

HDMI output is uncool with catalyst. I think you may want to try DVI...I could get to work my TV panel _ONLY_ with  plain old VGA cable with xorg (even with nvidia) correctly...so in my experience that's a gray area with linux drivers...  (and windows Catalyst doesnt work properly either - HDMI is a strict signal , as it looks)

Last edited by timong (2010-04-25 23:20:29)


2x arch amd64, one with Intel GP GMA965, one with ATi Mobility HD 5650

Offline

#1757 2010-04-26 01:10:15

mDuo13
Member
Registered: 2010-04-25
Posts: 90

Re: The AMD/ATI Bar & Grill

timong wrote:
mDuo13 wrote:

P.S. I'm using HDMI right now - haven't tried any other cable types since I don't have any on hand and the 5770 only has 3 outputs (2 HDMI, one DVI, the latter of which is being used by my other monitor).

HDMI output is uncool with catalyst. I think you may want to try DVI...I could get to work my TV panel _ONLY_ with  plain old VGA cable with xorg (even with nvidia) correctly...so in my experience that's a gray area with linux drivers...  (and windows Catalyst doesnt work properly either - HDMI is a strict signal , as it looks)

It sounds like it's worth a try, though I currently don't have any DVI cables sitting around. I'll see if I can get one from a friend to try out. Doesn't explain why it used to work with the old 9.11 Catalyst and 1.7.4 Xorg server back on Ubuntu though.

One other thing I'm getting now is that if I fullscreen mplayer, depending on which screen it fullscreens to, it either works fine or displays in a corner of my virtual desktop (my monitors are somewhat vertically offset) with garbage covering the rest of both screens. Earlier today it would work for the big screen and break for the small screen; then it started breaking for the big screen and working for the small screen. Now (after disabling and re-enabling some stuff in Catalyst) it's back to working on the big one. Used to be able to fullscreen things to either screen successfully...

Looking at my xorg.conf, it's kind of a mess. Any idea why I would need four "Monitor" sections?

Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "ServerFlags"
    Option        "Xinerama" "off"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-1"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Monitor"
    Identifier   "0-DFP2"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
    Option        "TargetRefresh" "60"
    Option        "Position" "1280 0"
    Option        "Rotate" "normal"
    Option        "Disable" "false"
    Option        "PreferredMode" "1920x1080"
EndSection

Section "Monitor"
    Identifier   "0-CRT1"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
    Option        "TargetRefresh" "60"
    Option        "Position" "0 590"
    Option        "Rotate" "normal"
    Option        "Disable" "false"
    Option        "PreferredMode" "1280x1024"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    Option        "Monitor-DFP2" "0-DFP2"
    Option        "Monitor-CRT1" "0-CRT1"
    BusID       "PCI:2:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-1"
    Driver      "fglrx"
    BusID       "PCI:2:0:0"
    Screen      1
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Virtual   3200 3200
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-1"
    Device     "aticonfig-Device[0]-1"
    Monitor    "aticonfig-Monitor[0]-1"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Last edited by mDuo13 (2010-04-26 01:12:07)

Offline

#1758 2010-04-26 10:57:10

Kariddi
Member
Registered: 2009-03-12
Posts: 45

Re: The AMD/ATI Bar & Grill

Finally with this latest Ubuntu driver I can say to be happy with my 5850 card under linux!!

Everything is OK! Not a crash since the install. XVba works, Unigine works (have problems with AA, but without is ok), I can play penumbra perfectly and KDE effects work.

AND I CAN USE xorg 1.7!!

I love this driver big_smile

Bye

Offline

#1759 2010-04-26 10:59:48

flamelab
Member
From: Athens, Hellas (Greece)
Registered: 2007-12-26
Posts: 2,160

Re: The AMD/ATI Bar & Grill

Kariddi wrote:

Finally with this latest Ubuntu driver I can say to be happy with my 5850 card under linux!!

Everything is OK! Not a crash since the install. XVba works, Unigine works (have problems with AA, but without is ok), I can play penumbra perfectly and KDE effects work.

AND I CAN USE xorg 1.7!!

I love this driver big_smile

Bye

You love it because it does things it ought to have done many months ago ? xD

Offline

#1760 2010-04-26 11:31:32

Kariddi
Member
Registered: 2009-03-12
Posts: 45

Re: The AMD/ATI Bar & Grill

flamelab wrote:
Kariddi wrote:

Finally with this latest Ubuntu driver I can say to be happy with my 5850 card under linux!!

Everything is OK! Not a crash since the install. XVba works, Unigine works (have problems with AA, but without is ok), I can play penumbra perfectly and KDE effects work.

AND I CAN USE xorg 1.7!!

I love this driver big_smile

Bye

You love it because it does things it ought to have done many months ago ? xD

I haven't said I love catalyst drivers.

I said I love THIS SPECIFIC driver version tongue

Offline

#1761 2010-04-26 14:17:14

mits
Member
From: Bucharest/Romania
Registered: 2008-01-10
Posts: 129

Re: The AMD/ATI Bar & Grill

mouse256 wrote:

Mits: I have the same issue with the same laptop (dell 1555)
Currently using catalyst 9.12, kernel 2.6.32, suspend works, but temperate after resume is O° and fan speed is not adjusted anymore, thus resulting the laptop going into a thermal protection if causing too much load.

I did not try catalyst-test, I'm eager to see how to get it fixed

With kernel 2.6.30.../ 2.6.31... and catalyst suspend/restore is working with noapic option at kernel line  (sensors and fan is ok after resume), but sometime when laptop is running after several minutes I am not able to change display brightness and in dmesg report:

 EC: input buffer is not empty, aborting transaction

(is known bug https://bugzilla.kernel.org/show_bug.cgi?id=13689"
I think that bug is solved in 2.9.34 kernel, but is problem with restore from suspend (probably because of catalyt-test driver).

Offline

#1762 2010-04-26 20:43:56

mouse256
Member
From: Antwerpen, Belgium
Registered: 2005-08-24
Posts: 247

Re: The AMD/ATI Bar & Grill

mits wrote:
mouse256 wrote:

Mits: I have the same issue with the same laptop (dell 1555)
Currently using catalyst 9.12, kernel 2.6.32, suspend works, but temperate after resume is O° and fan speed is not adjusted anymore, thus resulting the laptop going into a thermal protection if causing too much load.

I did not try catalyst-test, I'm eager to see how to get it fixed

With kernel 2.6.30.../ 2.6.31... and catalyst suspend/restore is working with noapic option at kernel line  (sensors and fan is ok after resume), but sometime when laptop is running after several minutes I am not able to change display brightness and in dmesg report:

 EC: input buffer is not empty, aborting transaction

(is known bug https://bugzilla.kernel.org/show_bug.cgi?id=13689"
I think that bug is solved in 2.9.34 kernel, but is problem with restore from suspend (probably because of catalyt-test driver).

I have the following boot line:

kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/156cc9c7-0889-4962-8365-614f0ed4db6e ro noapic acpi_brightness=vendor

My brightness keys seem to be working all the time (I used to have big problems with them), but the overheating after resume is a problem. Maybe I need a newer version of catalyst.
I do not think the acpi_brightness line at boot solved my brightness problem, I think it was solved when I installed "acpi-support" from aur.

Offline

#1763 2010-04-27 00:02:23

ozooha
Member
Registered: 2009-09-29
Posts: 14

Re: The AMD/ATI Bar & Grill

I have a ATI 4770 and have loaded the catalyst-test using the makepkg -s and pacman  -U *pkg.tar.xz way.
My xorg was copied from the Ubuntu 10.04RC version which was functioning well.
However after booting in it gives me the terminal login prompt instead of the KDE login window.
I have tried with and without the nomodeset option on kernel command without success.
Please help and let me know if I need to provide you with any additional information.
Below you will find the contents of my Xorg.0.log file:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH x86_64 
Current Operating System: Linux ozoohaPC 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/ce57c33d-2b9e-4463-aec8-7de92cc99f46 ro nomodeset vga=794
Build Date: 01 April 2010  05:28:33PM
 
Current version of pixman: 0.18.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 26 19:38:44 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[1]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[1]-0"
(==) No monitor specified for screen "amdcccle-Screen[1]-0".
    Using a default monitor configuration.
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c1080
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:94b3:1682:2900 ATI Technologies Inc Radeon HD 4770 [RV740] rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.7.1, module version = 8.72.11
    Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:58
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x94B3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x2374290
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4770" (Chipset = 0x94b3)
(--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x2900)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdfe0000
(--) fglrx(0): I/O port at 0x0000ee00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.22
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: _113-BA4302-105
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 28.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: HSD  Model: 18b2  Serial#: 16843009
(II) fglrx(0): Year: 2008  Week: 25
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): DFP 1.x compatible TMDS
(II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.649 redY: 0.335   greenX: 0.283 greenY: 0.605
(II) fglrx(0): blueX: 0.151 blueY: 0.073   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
(II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 146.2 MHz   Image Size:  480 x 270 mm
(II) fglrx(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) fglrx(0): Serial No: 825UHM03A5129
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 150 MHz
(II) fglrx(0): Monitor name: HF229
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff002264b21801010101
(II) fglrx(0):     1912010381301e782a78f5a655489b26
(II) fglrx(0):     125054bfef808180714f8140950f9500
(II) fglrx(0):     01010101010121399030621a274068b0
(II) fglrx(0):     3600e00e1100001c000000ff00383235
(II) fglrx(0):     55484d30334135313239000000fd0032
(II) fglrx(0):     4b1e520f000a202020202020000000fc
(II) fglrx(0):     0048463232390a2020202020202001c4
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP 3 [dfp3]
(II) Quirked EDID physical size to 0x0 cm
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 357  Serial#: 0
(II) fglrx(0): Year: 2007  Week: 34
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Indeterminate output size
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.652 redY: 0.325   greenX: 0.206 greenY: 0.673
(II) fglrx(0): blueX: 0.147 blueY: 0.072   whiteX: 0.280 whiteY: 0.290
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
(II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 85.5 MHz   Image Size:  160 x 90 mm
(II) fglrx(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
(II) fglrx(0): Ranges: V min: 23 V max: 61 Hz, H min: 26 H max: 68 kHz, PixClock max 230 MHz
(II) fglrx(0): Monitor name: SAMSUNG
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff004c2d570300000000
(II) fglrx(0):     22110103801009780a1deda75334ac25
(II) fglrx(0):     12474a21080081800101010101010101
(II) fglrx(0):     010101010101023a801871382d40582c
(II) fglrx(0):     4500a05a0000001e662150b051001b30
(II) fglrx(0):     40703600a05a0000001e000000fd0017
(II) fglrx(0):     3d1a4417000a202020202020000000fc
(II) fglrx(0):     0053414d53554e470a202020202001bc
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section 0-DFP1
(**) fglrx(0): Option "PreferredMode" "1680x1050"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP3 using monitor section 0-DFP3
(**) fglrx(0): Option "PreferredMode" "1920x1080"
(**) fglrx(0): Option "Position" "1680 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP3 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1680x1050
(II) fglrx(0): Output DFP3 using initial mode 1920x1080
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4770 has 2 configurable heads and 2 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 15, (OK)
ukiOpenByBusid: ukiOpenMinor returns 15
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fd9b3404000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.72.11
(II) fglrx(0):     Date: Apr  8 2010
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.33-ARCH
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x03a98000
(II) fglrx(0): FBMM initialized for area (0,0)-(3840,4000)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(3840,3840) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 3840 x 160
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.2.1
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x45cd68]
1: /usr/bin/X (0x400000+0x59a09) [0x459a09]
2: /lib/libpthread.so.0 (0x7fd9b20fc000+0xef20) [0x7fd9b210af20]
3: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x1288ffd) [0x7fd9a8bf8ffd]
4: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x1289c2d) [0x7fd9a8bf9c2d]
5: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x128a2f6) [0x7fd9a8bfa2f6]
6: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x12e63af) [0x7fd9a8c563af]
7: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x12e0bae) [0x7fd9a8c50bae]
8: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x1135964) [0x7fd9a8aa5964]
9: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x1127a22) [0x7fd9a8a97a22]
10: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x12e949) [0x7fd9a7a9e949]
11: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x98db74) [0x7fd9a82fdb74]
12: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7fd9a7970000+0x98dcd0) [0x7fd9a82fdcd0]
13: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (__driCreateNewScreen_20050727+0x997) [0x7fd9a8bfc867]
14: /usr/lib/xorg/modules/extensions/libglx.so (0x7fd9b3268000+0x18c1c) [0x7fd9b3280c1c]
15: /usr/lib/xorg/modules/extensions/libglx.so (0x7fd9b3268000+0x1a759) [0x7fd9b3282759]
16: /usr/lib/xorg/modules/extensions/libglx.so (0x7fd9b3268000+0x19d59) [0x7fd9b3281d59]
17: /usr/bin/X (InitExtensions+0x89) [0x47e969]
18: /usr/bin/X (0x400000+0x21927) [0x421927]
19: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fd9b1379b1d]
20: /usr/bin/X (0x400000+0x21659) [0x421659]
Floating point exception at address 0x7fd9a8bf8ffd

Fatal server error:
Caught signal 8 (Floating point exception). Server aborting


Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.

Last edited by ozooha (2010-04-27 01:06:26)

Offline

#1764 2010-04-27 00:26:09

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

@ozooha: can you please encase your log in ["code]your log here["/code] tags? (write it without " signs)
Have you tried xorg.conf builded with aticonfig --initial ?

Last edited by Vi0L0 (2010-04-27 00:28:35)

Offline

#1765 2010-04-27 01:11:25

ozooha
Member
Registered: 2009-09-29
Posts: 14

Re: The AMD/ATI Bar & Grill

@Vi0L0: yes I have without success and below are the files in case they are helpful i.e. the xorg.conf along with its Xorg.0.log file
xorg.conf using aticonfig --iniital

Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Monitor"
    Identifier   "0-DFP1"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
    Option        "PreferredMode" "1680x1050"
    Option        "TargetRefresh" "60"
    Option        "Position" "0 0"
    Option        "Rotate" "normal"
    Option        "Disable" "false"
EndSection

Section "Monitor"
    Identifier   "0-DFP3"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
    Option        "PreferredMode" "1680x1050"
    Option        "TargetRefresh" "60"
    Option        "Position" "0 0"
    Option        "Rotate" "normal"
    Option        "Disable" "false"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    Option        "Monitor-DFP1" "0-DFP1"
    Option        "Monitor-DFP3" "0-DFP3"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1920x1080" "1680x1050"
    EndSubSection
EndSection

and this its Xorg.0.log file

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH x86_64 
Current Operating System: Linux ozoohaPC 2.6.33-ARCH #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/ce57c33d-2b9e-4463-aec8-7de92cc99f46 ro vga=794
Build Date: 01 April 2010  05:28:33PM
 
Current version of pixman: 0.18.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 26 19:37:11 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "amdcccle Layout"
(**) |-->Screen "amdcccle-Screen[1]-0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "amdcccle-Device[1]-0"
(==) No monitor specified for screen "amdcccle-Screen[1]-0".
    Using a default monitor configuration.
(**) Option "Xinerama" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c1080
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:94b3:1682:2900 ATI Technologies Inc Radeon HD 4770 [RV740] rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.7.1, module version = 8.72.11
    Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1                              
(II) ATI Proprietary Linux Driver Build Date: Apr  8 2010 21:40:58
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x94B3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x24ec290
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4770" (Chipset = 0x94b3)
(--) fglrx(0): (PciSubVendor = 0x1682, PciSubDevice = 0x2900)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdfe0000
(--) fglrx(0): I/O port at 0x0000ee00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.22
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: _113-BA4302-105
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 28.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: HSD  Model: 18b2  Serial#: 16843009
(II) fglrx(0): Year: 2008  Week: 25
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): DFP 1.x compatible TMDS
(II) fglrx(0): Max Image Size [cm]: horiz.: 48  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.649 redY: 0.335   greenX: 0.283 greenY: 0.605
(II) fglrx(0): blueX: 0.151 blueY: 0.073   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
(II) fglrx(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 146.2 MHz   Image Size:  480 x 270 mm
(II) fglrx(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) fglrx(0): Serial No: 825UHM03A5129
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 150 MHz
(II) fglrx(0): Monitor name: HF229
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff002264b21801010101
(II) fglrx(0):     1912010381301e782a78f5a655489b26
(II) fglrx(0):     125054bfef808180714f8140950f9500
(II) fglrx(0):     01010101010121399030621a274068b0
(II) fglrx(0):     3600e00e1100001c000000ff00383235
(II) fglrx(0):     55484d30334135313239000000fd0032
(II) fglrx(0):     4b1e520f000a202020202020000000fc
(II) fglrx(0):     0048463232390a2020202020202001c4
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Connected Display1: DFP 3 [dfp3]
(II) Quirked EDID physical size to 0x0 cm
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 357  Serial#: 0
(II) fglrx(0): Year: 2007  Week: 34
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Indeterminate output size
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.652 redY: 0.325   greenX: 0.206 greenY: 0.673
(II) fglrx(0): blueX: 0.147 blueY: 0.072   whiteX: 0.280 whiteY: 0.290
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
(II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 85.5 MHz   Image Size:  160 x 90 mm
(II) fglrx(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
(II) fglrx(0): Ranges: V min: 23 V max: 61 Hz, H min: 26 H max: 68 kHz, PixClock max 230 MHz
(II) fglrx(0): Monitor name: SAMSUNG
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff004c2d570300000000
(II) fglrx(0):     22110103801009780a1deda75334ac25
(II) fglrx(0):     12474a21080081800101010101010101
(II) fglrx(0):     010101010101023a801871382d40582c
(II) fglrx(0):     4500a05a0000001e662150b051001b30
(II) fglrx(0):     40703600a05a0000001e000000fd0017
(II) fglrx(0):     3d1a4417000a202020202020000000fc
(II) fglrx(0):     0053414d53554e470a202020202001bc
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section 0-DFP1
(**) fglrx(0): Option "PreferredMode" "1680x1050"
(**) fglrx(0): Option "Position" "0 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output DFP3 using monitor section 0-DFP3
(**) fglrx(0): Option "PreferredMode" "1920x1080"
(**) fglrx(0): Option "Position" "1680 0"
(**) fglrx(0): Option "Disable" "false"
(**) fglrx(0): Option "Rotate" "normal"
(**) fglrx(0): Option "TargetRefresh" "60"
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 connected
(II) fglrx(0): Output DFP3 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output DFP1 using initial mode 1680x1050
(II) fglrx(0): Output DFP3 using initial mode 1920x1080
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4770 has 2 configurable heads and 2 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 15, (OK)
ukiOpenByBusid: ukiOpenMinor returns 15
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f355e099000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.72.11
(II) fglrx(0):     Date: Apr  8 2010
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.33-ARCH
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x03a98000
(II) fglrx(0): FBMM initialized for area (0,0)-(3840,4000)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(3840,3840) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 3840 x 160
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.2.1
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed. 
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
(II) fglrx(0): User Preference Output DFP3 using refresh rate 60.0 Hz.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 252
ukiDynamicMajor: found major device number 252
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x45cd68]
1: /usr/bin/X (0x400000+0x59a09) [0x459a09]
2: /lib/libpthread.so.0 (0x7f355cd91000+0xef20) [0x7f355cd9ff20]
3: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x1288ffd) [0x7f355388dffd]
4: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x1289c2d) [0x7f355388ec2d]
5: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x128a2f6) [0x7f355388f2f6]
6: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x12e63af) [0x7f35538eb3af]
7: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x12e0bae) [0x7f35538e5bae]
8: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x1135964) [0x7f355373a964]
9: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x1127a22) [0x7f355372ca22]
10: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x12e949) [0x7f3552733949]
11: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x98db74) [0x7f3552f92b74]
12: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (0x7f3552605000+0x98dcd0) [0x7f3552f92cd0]
13: /usr/X11R6/lib64/modules/dri/fglrx_dri.so (__driCreateNewScreen_20050727+0x997) [0x7f3553891867]
14: /usr/lib/xorg/modules/extensions/libglx.so (0x7f355defd000+0x18c1c) [0x7f355df15c1c]
15: /usr/lib/xorg/modules/extensions/libglx.so (0x7f355defd000+0x1a759) [0x7f355df17759]
16: /usr/lib/xorg/modules/extensions/libglx.so (0x7f355defd000+0x19d59) [0x7f355df16d59]
17: /usr/bin/X (InitExtensions+0x89) [0x47e969]
18: /usr/bin/X (0x400000+0x21927) [0x421927]
19: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f355c00eb1d]
20: /usr/bin/X (0x400000+0x21659) [0x421659]
Floating point exception at address 0x7f355388dffd

Fatal server error:
Caught signal 8 (Floating point exception). Server aborting


Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.

Offline

#1766 2010-04-27 05:27:18

mDuo13
Member
Registered: 2010-04-25
Posts: 90

Re: The AMD/ATI Bar & Grill

mDuo13 wrote:
timong wrote:
mDuo13 wrote:

P.S. I'm using HDMI right now - haven't tried any other cable types since I don't have any on hand and the 5770 only has 3 outputs (2 HDMI, one DVI, the latter of which is being used by my other monitor).

HDMI output is uncool with catalyst. I think you may want to try DVI...I could get to work my TV panel _ONLY_ with  plain old VGA cable with xorg (even with nvidia) correctly...so in my experience that's a gray area with linux drivers...  (and windows Catalyst doesnt work properly either - HDMI is a strict signal , as it looks)

It sounds like it's worth a try, though I currently don't have any DVI cables sitting around. I'll see if I can get one from a friend to try out. Doesn't explain why it used to work with the old 9.11 Catalyst and 1.7.4 Xorg server back on Ubuntu though.

Strangely enough, using a DVI cable did fix the problem with the borders. God knows what is wrong with Catalyst and HDMI. I'm lucky I had a friend who had a spare. Thanks, timong, for the suggestion.

Now, I'm still having that weird problem with only being able to fullscreen mplayer to one of the two, but it's currently working with the one that I usually want to fullscreen to, so I can work out the problem later if at all.

In any case, it looks like I'm out of AMD Hell and on to finding and installing various apps and utilities that'll be useful... which is, in many ways, the fun part. Huzzah!

Offline

#1767 2010-04-28 00:12:27

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: The AMD/ATI Bar & Grill

catalyst-test (and all of them) put brightness at maximum on my ATI HD 5650

~ xbacklight
100.000000
~ xbacklight -set 50%
X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  155 (RANDR)
  Minor opcode of failed request:  13 (RRChangeOutputProperty)
  Value in failed request:  0x89
  Serial number of failed request:  16
  Current serial number in output stream:  17

i can't work for a long time in this way.. my eyes gonna explode

Offline

#1768 2010-04-28 00:48:56

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

@kismet010: what about using amdcccle?

Offline

#1769 2010-04-28 01:14:51

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

@ozooha:
<sigh> don't know...

the only thing thats "bad" in your xorg.conf is that dfp3 monitor (samsung) should have:
     Option        "PreferredMode" "1920x1080"
instead of:
    Option        "PreferredMode" "1680x1050"

but that shouldnt manifest as "Floating point exception" of xserver...
Try to change that but i dont believe in any success here.
modprobe fglrx works fine?

Hmm... try maybe to use [catalyst-test-xorg18] repo with xserver 1.8 (only for 2.6.33-ARCH kernel, type `uname -r` to get this info):
http://bbs.archlinux.org/viewtopic.php? … 53#p740353

If no change - try maybe to use [catalyst] repo with xserver 1.6 (again if you are using 2.6.33-ARCH kernel): http://bbs.archlinux.org/viewtopic.php? … 91#p712491

Last edited by Vi0L0 (2010-04-28 01:16:02)

Offline

#1770 2010-04-28 10:12:43

skewml
Member
From: Russia, Rostov-on-Don
Registered: 2010-04-28
Posts: 1

Re: The AMD/ATI Bar & Grill

I have found a strange feature, when I try to pm-suspend with running ATI Overclocking Utility X32 my laptop can't resume correctly. Every time it starts whit login window and new kde session after login. I use catalyst-test, xorg-server-1.7-catalyst-maximize-fix & kernel26 from [core].
Can anybody confirm this feature?

Last edited by skewml (2010-04-28 10:18:58)


Sorry, my english is not so good...

Offline

#1771 2010-04-28 10:20:26

mouse256
Member
From: Antwerpen, Belgium
Registered: 2005-08-24
Posts: 247

Re: The AMD/ATI Bar & Grill

Kismet010: what about "acpi-support" from aur? I think it was that one that solved all my brightness trouble. (not 100% sure though, I tried a lot of things)

Offline

#1772 2010-04-28 16:37:13

atomic
Member
From: Srbija
Registered: 2008-08-20
Posts: 20
Website

Re: The AMD/ATI Bar & Grill

I haven't seen yet a thread with more Views than this one! At the monent result is 225324 views, and over 1700 replies! This tells me that Ati is the biggest pain in the ass in Linux world. It is definetly time for Ati, and Nvidia too, to seriously consider their support for us.

Last edited by atomic (2010-04-28 16:38:47)

Offline

#1773 2010-04-28 18:33:15

agapito
Member
From: Spain
Registered: 2008-11-13
Posts: 495

Re: The AMD/ATI Bar & Grill

10.4 released.

https://a248.e.akamai.net/f/674/9206/0/ … _linux.pdf

Last edited by agapito (2010-04-28 18:33:53)


Excuse my poor English.

Offline

#1774 2010-04-28 20:15:02

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

Indeed, aur's catalyst http://aur.archlinux.org/packages.php?ID=29111 has been updated

Not much change between this and catalyst-test...
xserver 1.7 support, and patched xserver 1.8 support.
Version of 2d driver = 8.72.5 (for newest catalyst-test it was 8.72.11)
Version of opengl lib = 3.2.9756 (no change between this and catalyst-test)
For kernel newer than 2.6.32 we still need to use (included) patches.
Works also with 2.6.34-rc5

[catalyst] repo will be updated soon, [catalyst-xorg18] repo will also arrive soon smile

Last edited by Vi0L0 (2010-04-28 20:21:52)

Offline

#1775 2010-04-28 20:19:23

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,305
Website

Re: The AMD/ATI Bar & Grill

BTW xserver 1.8 should soon arrive in extra, so i've prepared [xorg17] repo with xserver 1.7 and other needed packages for future use to people who have problems with xserver 1.8...

With package xorg-server which is patched with backclear patch
and package xorg-server-1.7-catalyst-maximize-fix which is patched with fedora patch (thanks dcc24)

Add this above all repos in /etc/pacman.conf:

For i686:

For x86_64:

And here are direct links to patched xservers 1.7:
i686:
xorg-server: http://dl.dropbox.com/u/4321633/repo/xo … pkg.tar.xz
xorg-server-1.7-catalyst-maximize-fix: http://dl.dropbox.com/u/4321633/repo/xo … pkg.tar.xz

x86_64:
xorg-server: http://dl.dropbox.com/u/4321633/repo/xo … pkg.tar.xz
xorg-server-1.7-catalyst-maximize-fix: http://dl.dropbox.com/u/4321633/repo/xo … pkg.tar.xz

Last edited by Vi0L0 (2010-04-28 23:09:30)

Offline

Board footer

Powered by FluxBB