You are not logged in.
Hey guys.
I have 2 Asus EEE B202 connected to each TV - but something is allthough different between the 2 machines.
On TV1:
The resolution during the bootprocess - shows 1280x1024 - but looses the signal and goes to 1024x768.
On TV2:
The resolution during bootprocess shows 1280x1024 ans stays there.
The xorg.conf is the same file on each machine (synced) so what could be the problem here
But when going into the screenresolution I can on TV1 choose between several settings - but cannot change the hertz.
On the ASUS EEE it's DVI out - through a HDMI cable to the TV. It can resolve the screen and see it's a medion TV. my menu.lst looks like this:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/6c123031-1f41-40f9-9344-3116ff89fb2a ro nopat vga=775
initrd /kernel26.img
So it should work with 1280x1024 - and the TV resolution allso shows that resolution.
xorg.conf looks like this:
Section "ServerLayout"
Identifier "ArchLinux"
Screen 0 "Screen0"
InputDevice "keyboard"
InputDevice "mouse"
InputDevice "synaptics"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "BlankTime" "5"
Option "AIGLX" "true"
EndSection
Section "InputDevice"
Identifier "keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "synaptics"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1000"
Option "RightEdge" "5400"
Option "TopEdge" "1000"
Option "BottomEdge" "4900"
Option "PalmDetect" "0"
Option "SHMConfig" "true"
Option "SendCoreEvents" "yes"
Option "HorizEdgeScroll" "1"
Option "VertEdgeScroll" "1"
Option "RBCornerButton" "0"
Option "RTCornerButton" "0"
Option "MaxSpeed" "0.9"
# You will also need the following 3 lines if you're using Xorg 1.5RC6 or newer
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "ASUS"
ModelName "eeePC b202"
Modeline "1280*1024" 29.58 800 816 896 992 480 481 484 497 -HSync +Vsync # 60 Hz
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
But starting the gnome/xorg shows this in the last lines:
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (15360 kB) X tiled
(II) intel(0): 0x02000000-0x04cfffff: exa offscreen (46080 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (15360 kB) X tiled
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (15360 kB) X tiled
(II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 709 x 399
(II) Synaptics touchpad driver version 0.99.1
synaptics no synaptics event device found
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "1000"
(**) Option "RightEdge" "5400"
(**) Option "TopEdge" "1000"
(**) Option "BottomEdge" "4900"
(**) Option "VertEdgeScroll" "1"
(**) Option "HorizEdgeScroll" "1"
(**) Option "RTCornerButton" "0"
(**) Option "RBCornerButton" "0"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "PalmDetect" "0"
Query no Synaptics: 6003C8
(--) synaptics: no supported touchpad found
(**) Option "SendCoreEvents" "yes"
(**) synaptics: always reports core events
(II) evaluating device (synaptics)
(II) XINPUT: Adding extended input device "synaptics" (type: TOUCHPAD)
synaptics no synaptics event device found
Query no Synaptics: 6003C8
(--) synaptics: no supported touchpad found
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Dell Premium USB Optical Mouse
(**) Dell Premium USB Optical Mouse: always reports core events
(**) Dell Premium USB Optical Mouse: Device: "/dev/input/event2"
(II) Dell Premium USB Optical Mouse: Found x and y relative axes
(II) Dell Premium USB Optical Mouse: Found mouse buttons
(II) Dell Premium USB Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Dell Premium USB Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device HID 0430:0005
(**) HID 0430:0005: always reports core events
(**) HID 0430:0005: Device: "/dev/input/event1"
(II) HID 0430:0005: Found keys
(II) HID 0430:0005: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0430:0005" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) HID 0430:0005: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) HID 0430:0005: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) HID 0430:0005: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): EDID vendor "MED", prod id 51395
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
(II) intel(0): Modeline "1920x540"x0.0 74.25 1920 2448 2492 2640 540 542 547 562 interlace +hsync +vsync (28.1 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1368x769"x60.0 85.97 1368 1440 1584 1800 769 770 773 796 -hsync +vsync (47.8 kHz)
(II) intel(0): EDID vendor "MED", prod id 51395
How come that Gnome forces the resolution back to 1024x768
Just getting better .... All the time
Offline
OK, first of all, I don't know much about dual head or xinerama setups, so no promise that I can actually help you. But reading your posting, the main issue for me is that I simply don't understand you setup.
1.) Do you have two computers (i.e. two Asus EEE B202 boxes) with one monitor (TV?) attached to each? If yes, both systems are the same, even grub settings and xorg.conf, but the monitors are different? Or are the monitors the same, too?
2.) What is the output of xrandr?
Offline
Hey.
Thanks for the answer.
1.
No - I do not run dualheads on the machine.
I run mythtv Backend with 3 different frontends in my house.
Each Frontend are those Asus EEE B202 - connected to 1TV each. So no dualhead or specific settings.
2.
On TV1 ( The one with the problem)
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1920 x 1920
VGA disconnected (normal left inverted right x axis y axis)
TMDS-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 709mm $
1280x720 50.0 + 60.0
1920x540 50.0
1024x768 60.0*
800x600 60.3 56.2
640x480 60.0 59.9
720x400 70.1
Grub and everything are exactly the same on each machine ( though the TV's are different - A medion and SONY ) THe sony works fine but the medion doesn't.
A told before - It's only when gnome is starting the settings goes offshore - and forces back to 1204*768, but during all bootprocess it shows 1280*1024.
How come the resolution can shows the high in boot and not in gnome?
Thanks again.
Last edited by peque (2008-12-18 18:21:50)
Just getting better .... All the time
Offline
You probably know this: the "+" means that 1280x720 is actually the preferred mode as you intended to set in your xorg.conf. The "*" signals that 1024x768 is the current mode. This means there is either an error during the start of X, which should be noted in /var/log/Xorg.0.log. Or - as you did assume, too - Gnome somehow changes the video mode.
What does the X log file say?
Offline