(Solved)USB mass storage driver could not be recognized

fallening · 2008-12-29 12:37:23

Last week, after upgrade I found that I could not find the driver even using sudo fdisk -l, and yesterday I bought a new one from the mall, but it still could work; And when I am running windowsxp, everything is good with these two drivers!

the related dmesg output:

usb 5-2: new high speed USB device using ehci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input11
usbcore: registered new interface driver usbtouchscreen
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 5-2: USB disconnect, address 3
X:2462 freeing invalid memtype e0000000-f0000000
mtrr: no MTRR for e0000000,10000000 found
X:16717 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:16717 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:16728 freeing invalid memtype e0000000-f0000000
X:16717 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:16729 freeing invalid memtype e0000000-f0000000
X:16717 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:16730 freeing invalid memtype e0000000-f0000000
X:16717 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:16731 freeing invalid memtype e0000000-f0000000
usb 4-2: new full speed USB device using uhci_hcd and address 4
usb 4-2: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 5:0:0:0: Direct-Access     USB 2.0  Storage Device        PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 2015744 512-byte hardware sectors (1032 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 3b 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2015744 512-byte hardware sectors (1032 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 3b 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-2: USB disconnect, address 4
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: [sdb] READ CAPACITY failed
scsi 5:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
scsi 5:0:0:0: [sdb] Sense not available.
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: [sdb] Write Protect is off
scsi 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
scsi 5:0:0:0: [sdb] Assuming drive cache: write through
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: [sdb] READ CAPACITY failed
scsi 5:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
scsi 5:0:0:0: [sdb] Sense not available.
scsi 5:0:0:0: rejecting I/O to dead device
scsi 5:0:0:0: [sdb] Write Protect is off
scsi 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
scsi 5:0:0:0: [sdb] Assuming drive cache: write through
usb 4-2: new full speed USB device using uhci_hcd and address 5
usb 4-2: not running at top speed; connect to a high speed hub
usb 4-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input12
usb 4-2: USB disconnect, address 5
X:16717 freeing invalid memtype e0000000-f0000000
mtrr: no MTRR for e0000000,10000000 found
X:19425 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:19425 conflicting memory types e0000000-f0000000 write-combining<->uncached-minus
reserve_memtype failed 0xe0000000-0xf0000000, track write-combining, req write-combining
X:19430 freeing invalid memtype e0000000-f0000000
usb 5-2: new high speed USB device using ehci_hcd and address 5
usb 5-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input13
input: failed to attach handler mousedev to device input13, error: -5
usb 5-2: USB disconnect, address 5
usb 5-2: new high speed USB device using ehci_hcd and address 6
usb 5-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input14
input: failed to attach handler mousedev to device input14, error: -5
usb 5-2: USB disconnect, address 6
usb 5-2: new high speed USB device using ehci_hcd and address 7
usb 5-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input15
input: failed to attach handler mousedev to device input15, error: -5
usb 5-2: USB disconnect, address 7
usb 5-2: new high speed USB device using ehci_hcd and address 8
usb 5-2: configuration #1 chosen from 1 choice
input: Kingston 2.0              as /class/input/input16
input: failed to attach handler mousedev to device input16, error: -5

and the system I am using:
$ uname -a

Linux enlightenment 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64 Intel(R) Celeron(R) CPU 550 @ 2.00GHz GenuineIntel GNU/Linux

Last edited by fallening (2008-12-30 09:16:44)

fallening · 2008-12-29 12:44:23

P.S: Ipod mp3 player works good as usual.

castagnaru · 2008-12-29 17:08:32

I had the same problem.

lsmod shows me that the usb-storage module is missing. Maybe the last updated kernel fails to autoload it.

So,

modprobe usb-storage

and everything now works.

Then I also have inserted the module in /etc/rc.conf, in the "MODULES" line.

Try with this.

fallening · 2008-12-30 09:16:21

thank you castagnaru, this works!!

Arch Linux

#1 2008-12-29 12:37:23

(Solved)USB mass storage driver could not be recognized

#2 2008-12-29 12:44:23

Re: (Solved)USB mass storage driver could not be recognized

#3 2008-12-29 17:08:32

Re: (Solved)USB mass storage driver could not be recognized

#4 2008-12-30 09:16:21

Re: (Solved)USB mass storage driver could not be recognized

Board footer