How to upgrade from 2007.3 Vodoo?

jazzi · 2009-01-04 03:00:27

I've a Arch havn't updated since from 2007.3, and now I think things chaned, include the pacman etc.

When I run

pacman -Syu

it shows errors.

How can I upgrade an old version of 2007.3 Vodoo to Now?

Thanks:)

jazzi

Sjoden · 2009-01-04 03:32:30

Hi, this should work.

pacman -Sy pacman

Pacman has been split up into a pacman package and a mirrorlist package. You will have to reorganize your mirrors since the new list wont be saved as a .pacnew, instead the old one is saved as a .pacorig.

rm /usr/lib/klibc/include/asm

Some limitations in file conflicts and the way pacman works prevents this from being automated, so you will have to do that command by hand BEFORE you upgrade, otherwise you will get a couple hundred file conflicts. DO NOT use the force flag in pacman, otherwise you'll break your system.

pacman -Syu

Please read the last dozen or two news items to catch up on some critical changes.

I'm not sure if that is everything, but I think so. Someone please correct me if I'm wrong.

/edit
Please backup anything of value or that you want to keep before even starting.

Last edited by Sjoden (2009-01-04 04:18:29)

jazzi · 2009-01-04 05:39:00

Thanks Zack, let my try and see how is going on tonight.

mcmillan · 2009-01-04 06:48:14

There was a time a while back that the syntax for the mirrors changed, I can't remember how far back that was though. If you can't get pacman and pacman-mirrorlist to install automatically you might need to download the packages by hand and install with pacman -U. There will probably be some other things that will need some changing by hand, just pay close attention to any messages that come up during the update. If you miss them it's stored in /var/log/pacman.log.

Sjoden · 2009-01-04 07:03:16

I think that probably was with the change of having each repository have its own mirrorlist file. He should be ok since the version of pacman he has will still have his old lists, and when he installs the new one, it will pull down and use the new list, which will have a different name. I think he'll just have some old mirrorlists to delete.

jazzi · 2009-01-04 12:06:36

pacman -S pacman
Targets: libarchive-2.5.5-1 libdownload-1.3-1 pacman-mirrorlist-20081213-1
pacman-3.2.1-2
Total Package Size: 0.9 MB
Proceed with upgrade? [Y/n] y
:: Retrieving packages from current...
warning: failed to get filesize for libarchive-2.5.5-1.pkg.tar.gz
failed downloading libarchive-2.5.5-1.pkg.tar.gz from ftp.archlinux.org: 550 Failed to open file.

warning: failed to get filesize for libdownload-1.3-1.pkg.tar.gz
failed downloading libdownload-1.3-1.pkg.tar.gz from ftp.archlinux.org: 550 Failed to open file.

warning: failed to get filesize for pacman-mirrorlist-20081213-1.pkg.tar.gz
failed downloading pacman-mirrorlist-20081213-1.pkg.tar.gz from ftp.archlinux.org: 550 Failed to open file.

warning: failed to get filesize for pacman-3.2.1-2.pkg.tar.gz
failed downloading pacman-3.2.1-2.pkg.tar.gz from ftp.archlinux.org: 550 Failed to open file.

error: anonymous login failed

Allan · 2009-01-04 12:08:57

You will probably need to manually download those packages and use "pacman -U"

jazzi · 2009-01-04 12:38:17

I found some hints in the forum

Thank you very much for help!!! Everything works just fine!
Here is little manual how to update pacman 2 to pacman 3 for newbie's (if someboby have the same problem):
1. download pacman, libarchive, libdownload and fakeroot packages manually (with webbrowser or wget)
2. put them into /var/cache/pacman/pkg ("chmod 644 and chown root" them)
3. Install those packages (pacman –U file1 file 2 ….)
4. Upgrade your /etc/pacman.conf (replace current with core)
5. Upgrade all system (pacman -Syu)
6. Have fun
Alex

Here is the pkg I downloaded in my /var/cache/pacman/pkg

libarchive-2.5.5-1-i686.pkg.tar.gz
libdownload-1.3-1-i686.pkg.tar.gz
pacman-3.2.1-2-i686.pkg.tar.gz
pacman-mirrorlist-20081213-1-i686.pkg.tar.gz

pacman -U libarchive-2.5.5-1-i686.pkg.tar.gz file2 file3 file4

It worked unsuccessfully, but when you run pacman again, it will let you upgrade your system, I let it downloaded for whole a night, this morning, he tells me "no package upgraded". I will show the errors later.

pacman -Syu
I get the following:
pacman -Syu
:: Synchronizing package databases...
kdemod-core is up to date
kdemod-extragear is up to date
kdemod-playground is up to date
core is up to date
extra 386.4K 55.2K/s 00:00:07 [#####################] 100%
community is up to date
:: Starting full system upgrade...
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
looking for inter-conflicts...
Targets (76): bash-3.2.048-1 kernel-headers-2.6.27.6-2 glibc-2.9-2
gcc-libs-4.3.2-2 libtasn1-1.7-1 zlib-1.2.3.3-3 gnutls-2.6.3-1
openssl-0.9.8i-3 heimdal-1.2.1-2 libpng-1.2.34-1
libcups-1.3.9-2 xcb-util-0.3.2-1 cairo-1.8.6-1 pango-1.22.4-1
gtk2-2.14.6-1 at-spi-1.24.1-1 avahi-0.6.24-1 binutils-2.19-1
bison-2.4.1-1 ca-certificates-20080809-5 dbus-glib-0.78-1
dhcpcd-4.0.7-1 diffutils-2.8.1-6 sqlite3-3.6.7-2 nss-3.12.2-1
xulrunner-1.9.0.5-2 epiphany-2.24.2.1-2
evolution-data-server-2.24.2-2 fakeroot-1.11.4-1 gcc-4.3.2-2
libxml2-2.7.2-1 gconf-2.24.0-2 gnome-panel-2.24.2-2
gnome-control-center-2.24.0.1-4 gnome-doc-utils-0.14.1-1
gnome-session-2.24.2-2 tdb-3.2.6-2 smbclient-3.2.6-2
gnome-vfs-2.24.0-2 grub-0.97-15 gvfs-1.0.3-2
hal-info-0.20081219-1 hdparm-9.3-1 hwd-5.4.2-1
hwdetect-2008.12-4 intel-dri-7.2-2 kdemod-kdelibs-4.1.3-4
kdemod-kdebase-workspace-4.1.3-5 kernel26-2.6.27.10-1
klibc-udev-135-1 libdmx-1.0.2-2 libexif-0.6.17-1
libgsf-1.14.10-1 libpcap-1.0.0-1 libx86-1.1-2
libxfont-1.3.4-1 loudmouth-1.4.3-1 man-pages-3.15-1
mcpp-2.7.2-1 poppler-0.10.2-1 poppler-qt-0.10.2-1 ppp-2.4.4-7
pycairo-1.8.0-1 qscintilla-2.3.2-2 rsync-3.0.5-1
subversion-1.5.5-1 sudo-1.7.0-1 tar-1.21-1 udev-135-1
vi-7.2.65-1 xextproto-7.0.4-1 xf86-input-evdev-2.1.0-1
xf86-video-vesa-2.1.0-1 xkeyboard-config-1.4-2
xorg-font-utils-7.4-1 xorg-server-1.5.3-4
Total Download Size: 0.00 MB
Total Installed Size: 709.89 MB
Proceed with installation? [Y/n] y
checking package integrity...
(76/76) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
bash: /usr/share/info/bash.info exists in filesystem
kernel-headers: /usr/include/..install.cmd exists in filesystem
kernel-headers: /usr/include/.install exists in filesystem
kernel-headers: /usr/include/asm-generic/..install.cmd exists in filesystem
vi: /usr/share/vim/spell/fixdup.vim exists in filesystem
xf86-input-evdev: /usr/include/xorg/evdev-properties.h exists in filesystem
xf86-input-evdev: /usr/lib/pkgconfig/xorg-evdev.pc exists in filesystem
xf86-input-evdev: /usr/share/licenses/xf86-input-evdev/COPYING exists in filesystem
Errors occurred, no packages were upgraded.

I think may the problem is that it can't upgrade the pacman successfully.

Last edited by jazzi (2009-01-05 08:01:34)

jazzi · 2009-01-05 12:12:12

Bad news. yesterday I shut it down when it upgraded unsuccessfully.

Today, I turn on the computer and can't boot, it tells me "system check failed"

I even can't run the

mount -n -o remount,rw /

it tells me there is no mount command.

jazzi · 2009-01-17 05:55:20

Here is my logs:
Errors.log

ubuntu@ubuntu:/media/disk/log$ dmesg errors.log
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

faillog

ubuntu@ubuntu:/media/disk/log$ dmesg faillog
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

Last edited by jazzi (2009-01-17 05:57:23)

jazzi · 2009-01-17 06:02:39

Kernel log

ubuntu@ubuntu:/media/disk/log$ dmesg kernel.log
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

log

ubuntu@ubuntu:/media/disk/log$ dmesg log
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

jazzi · 2009-01-17 06:06:15

ubuntu@ubuntu:/media/disk/log$ dmesg pacman.log
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

messages.log

ubuntu@ubuntu:/media/disk/log$ dmesg messages.log
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

jazzi · 2009-01-17 06:09:36

syslog.log

ubuntu@ubuntu:/media/disk/log$ dmesg syslog.log
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.
ubuntu@ubuntu:/media/disk/log$ dmesg syslog.log
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d70
[ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57328
[ 0.000000] HighMem 57328 -> 57328
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57328
[ 0.000000] On node 0 totalpages: 57328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 415 pages used for memmap
[ 0.000000] Normal zone: 52817 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6770 checksum 0
[ 0.000000] ACPI: RSDP 000F6770, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 0DFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 0DFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 0DFF30C0, 4507 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0DFF0000, 0040
[ 0.000000] ACPI: APIC 0DFF7600, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56881
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1498.905 MHz processor.
[ 24.790699] Console: colour VGA+ 80x25
[ 24.790704] console [tty0] enabled
[ 24.790963] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.791142] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 24.798784] Memory: 214948k/229312k available (2157k kernel code, 13768k reserved, 998k data, 364k init, 0k highmem)
[ 24.798795] virtual kernel memory layout:
[ 24.798797] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 24.798798] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.798800] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 24.798801] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 24.798803] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 24.798805] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 24.798806] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 24.798811] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.798860] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.878871] Calibrating delay using timer specific routine.. 3000.97 BogoMIPS (lpj=6001957)
[ 24.878914] Security Framework initialized
[ 24.878923] SELinux: Disabled at boot.
[ 24.878948] AppArmor: AppArmor initialized
[ 24.878954] Failure registering capabilities with primary security module.
[ 24.878967] Mount-cache hash table entries: 512
[ 24.879138] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.879151] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.879155] CPU: L2 Cache: 256K (64 bytes/line)
[ 24.879159] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.879173] Compat vDSO mapped to ffffe000.
[ 24.879188] Checking 'hlt' instruction... OK.
[ 24.895150] SMP alternatives: switching to UP code
[ 24.896560] Freeing SMP alternatives: 11k freed
[ 24.896740] Early unpacking initramfs... done
[ 25.352524] ACPI: Core revision 20070126
[ 25.352653] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 25.356539] CPU0: AMD Sempron(tm) 2200+ stepping 00
[ 25.356574] Total of 1 processors activated (3000.97 BogoMIPS).
[ 25.357316] ENABLING IO-APIC IRQs
[ 25.357624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.502882] Brought up 1 CPUs
[ 25.502953] CPU0 attaching sched-domain:
[ 25.502958] domain 0: span 01
[ 25.502960] groups: 01
[ 25.503256] net_namespace: 64 bytes
[ 25.503265] Booting paravirtualized kernel on bare hardware
[ 25.503915] Time: 13:05:27 Date: 01/17/09
[ 25.503958] NET: Registered protocol family 16
[ 25.504263] EISA bus registered
[ 25.504295] ACPI: bus type pci registered
[ 25.511944] PCI: PCI BIOS revision 2.10 entry at 0xfa410, last bus=1
[ 25.511948] PCI: Using configuration type 1
[ 25.511950] Setting up standard PCI resources
[ 25.518453] ACPI: EC: Look up EC in DSDT
[ 25.523930] ACPI: Interpreter enabled
[ 25.523940] ACPI: (supports S0 S1 S4 S5)
[ 25.523965] ACPI: Using IOAPIC for interrupt routing
[ 25.530699] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.531431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.552813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 25.552996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 25.553178] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 25.553337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553492] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553639] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.553933] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 25.554152] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 25.554370] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 25.554609] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 25.554844] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 25.555008] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.555057] pnp: PnP ACPI init
[ 25.555071] ACPI: bus type pnp registered
[ 25.559333] pnp: PnP ACPI: found 14 devices
[ 25.559338] ACPI: ACPI bus type pnp unregistered
[ 25.559343] PnPBIOS: Disabled by ACPI PNP
[ 25.559697] PCI: Using ACPI for IRQ routing
[ 25.559703] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.582809] NET: Registered protocol family 8
[ 25.582812] NET: Registered protocol family 20
[ 25.582923] AppArmor: AppArmor Filesystem Enabled
[ 25.586754] Time: tsc clocksource has been installed.
[ 25.594808] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 25.594812] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 25.594816] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.594820] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 25.594824] system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
[ 25.594828] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.594832] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 25.594835] system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
[ 25.594839] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.594843] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.594846] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 25.594856] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 25.594860] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 25.594864] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 25.594874] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 25.594877] system 00:03: ioport range 0x290-0x29f has been reserved
[ 25.594881] system 00:03: ioport range 0x800-0x805 has been reserved
[ 25.625495] PCI: Bridge: 0000:00:01.0
[ 25.625498] IO window: disabled.
[ 25.625503] MEM window: dc000000-ddffffff
[ 25.625508] PREFETCH window: d8000000-dbffffff
[ 25.625527] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.625544] NET: Registered protocol family 2
[ 25.662874] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 25.663188] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663314] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 25.663435] TCP: Hash tables configured (established 8192 bind 8192)
[ 25.663439] TCP reno registered
[ 25.674915] checking if image is initramfs... it is
[ 26.126677] Switched to high resolution mode on CPU 0
[ 26.537716] Freeing initrd memory: 7665k freed
[ 26.538710] audit: initializing netlink socket (disabled)
[ 26.538732] audit(1232197527.636:1): initialized
[ 26.541562] VFS: Disk quotas dquot_6.5.1
[ 26.541668] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.541860] io scheduler noop registered
[ 26.541863] io scheduler anticipatory registered
[ 26.541866] io scheduler deadline registered
[ 26.541880] io scheduler cfq registered (default)
[ 26.541896] PCI: VIA PCI bridge detected. Disabling DAC.
[ 26.541952] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.541962] Boot video device is 0000:01:00.0
[ 26.542333] isapnp: Scanning for PnP cards...
[ 26.896220] isapnp: No Plug & Play device found
[ 26.937574] Real Time Clock Driver v1.12ac
[ 26.937734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 26.937885] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.938049] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.939192] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.939624] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 26.940769] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.940867] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 26.941017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 26.941403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.941409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.954492] mice: PS/2 mouse device common for all mice
[ 26.954678] EISA: Probing bus 0 at eisa.0
[ 26.954700] Cannot allocate resource for EISA slot 4
[ 26.954703] Cannot allocate resource for EISA slot 5
[ 26.954719] EISA: Detected 0 cards.
[ 26.954724] cpuidle: using governor ladder
[ 26.954726] cpuidle: using governor menu
[ 26.954923] NET: Registered protocol family 1
[ 26.954964] Using IPI No-Shortcut mode
[ 26.955014] registered taskstats version 1
[ 26.955120] Magic number: 9:137:79
[ 26.955377] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 26.955380] EDD information not available.
[ 26.955938] Freeing unused kernel memory: 364k freed
[ 26.982351] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 28.278360] fuse init (API version 7.9)
[ 28.802126] SCSI subsystem initialized
[ 28.869789] libata version 3.00 loaded.
[ 28.905054] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 28.905062] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 28.905072] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.905161] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 28.925428] pata_via 0000:00:0f.0: version 0.3.3
[ 28.925463] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 28.933808] scsi0 : pata_via
[ 28.949810] scsi1 : pata_via
[ 28.951582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 28.951587] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 29.138029] ata1.00: HPA unlocked: 160830271 -> 160836480, native 160836480
[ 29.138040] ata1.00: ATA-7: HDS728080PLAT20, PF2OA21B, max UDMA/133
[ 29.138044] ata1.00: 160836480 sectors, multi 16: LBA48
[ 29.162090] ata1.00: configured for UDMA/133
[ 29.241777] usbcore: registered new interface driver usbfs
[ 29.241811] usbcore: registered new interface driver hub
[ 29.253750] usbcore: registered new device driver usb
[ 29.271475] USB Universal Host Controller Interface driver v3.0
[ 29.317807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 29.474112] ata2.00: ATAPI: PIONEER DVD-ROM DVD-126P, 1.02, max UDMA/100
[ 29.474132] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 29.637974] ata2.00: configured for UDMA/33
[ 29.638162] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 29.638748] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 29.639367] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 29.639372] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 29.639382] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.639398] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 29.639775] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 29.639815] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 29.640027] usb usb1: configuration #1 chosen from 1 choice
[ 29.640059] hub 1-0:1.0: USB hub found
[ 29.640068] hub 1-0:1.0: 2 ports detected
[ 29.741752] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.741772] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 29.741807] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 29.741834] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 29.741993] usb usb2: configuration #1 chosen from 1 choice
[ 29.742027] hub 2-0:1.0: USB hub found
[ 29.742035] hub 2-0:1.0: 2 ports detected
[ 29.845685] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.845705] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 29.845747] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 29.845775] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 29.845942] usb usb3: configuration #1 chosen from 1 choice
[ 29.845976] hub 3-0:1.0: USB hub found
[ 29.845985] hub 3-0:1.0: 2 ports detected
[ 29.949846] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 29.949867] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 29.949912] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
[ 29.949963] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
[ 29.961469] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.961664] usb usb4: configuration #1 chosen from 1 choice
[ 29.961699] hub 4-0:1.0: USB hub found
[ 29.961710] hub 4-0:1.0: 6 ports detected
[ 30.066144] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.066151] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 30.066161] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 30.066485] eth0: VIA Rhine II at 0xde001000, 00:0f:ea:b9:6b:86, IRQ 18.
[ 30.067196] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 30.341370] Driver 'sd' needs updating - please use bus_type methods
[ 30.341504] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341525] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341633] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 30.341649] sd 0:0:0:0: [sda] Write Protect is off
[ 30.341653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 30.341676] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.341682] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 30.360613] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 30.432548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.439573] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.439602] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 30.440686] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 30.440695] Uniform CD-ROM driver Revision: 3.20
[ 30.440784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 30.749223] usb 4-5: new high speed USB device using ehci_hcd and address 2
[ 30.882236] usb 4-5: configuration #1 chosen from 1 choice
[ 30.905284] usbcore: registered new interface driver libusual
[ 30.915800] Initializing USB Mass Storage driver...
[ 30.917548] scsi2 : SCSI emulation for USB Mass Storage devices
[ 30.918793] usbcore: registered new interface driver usb-storage
[ 30.918803] USB Mass Storage support registered.
[ 30.918956] usb-storage: device found at 2
[ 30.918959] usb-storage: waiting for device to settle before scanning
[ 31.197378] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.197384] EXT3-fs: write access will be enabled during recovery.
[ 31.711713] kjournald starting. Commit interval 5 seconds
[ 31.711745] EXT3-fs: recovery complete.
[ 31.712051] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.769109] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 31.769116] EXT3-fs: write access will be enabled during recovery.
[ 33.928322] kjournald starting. Commit interval 5 seconds
[ 33.928351] EXT3-fs: recovery complete.
[ 33.928858] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.044998] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.045004] EXT3-fs: write access will be enabled during recovery.
[ 34.116868] kjournald starting. Commit interval 5 seconds
[ 34.116882] EXT3-fs: recovery complete.
[ 34.117350] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.611346] kjournald starting. Commit interval 5 seconds
[ 34.611364] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.634010] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 34.634017] EXT3-fs: write access will be enabled during recovery.
[ 35.670243] kjournald starting. Commit interval 5 seconds
[ 35.670274] EXT3-fs: recovery complete.
[ 35.674413] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.775078] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.775085] EXT3-fs: write access will be enabled during recovery.
[ 35.915817] usb-storage: device scan complete
[ 35.916302] scsi 2:0:0:0: Direct-Access SigmaTel MSCN 0100 PQ: 0 ANSI: 4
[ 35.922544] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.923163] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.923171] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.923175] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925293] sd 2:0:0:0: [sdb] 255232 2048-byte hardware sectors (523 MB)
[ 35.925900] sd 2:0:0:0: [sdb] Write Protect is off
[ 35.925905] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 35.925908] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 35.925916] sdb: sdb1
[ 35.928083] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 35.928149] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 38.503559] kjournald starting. Commit interval 5 seconds
[ 38.503592] EXT3-fs: recovery complete.
[ 38.503937] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.980171] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.021836] ISO 9660 Extensions: RRIP_1991A
[ 39.258537] Registering unionfs 1.4
[ 39.258544] unionfs: debugging is not enabled
[ 39.273186] loop: module loaded
[ 39.533267] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 88.852010] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 89.547728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 89.708308] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 89.771615] Linux agpgart interface v0.102
[ 90.124730] parport_pc 00:0a: reported by Plug and Play ACPI
[ 90.124779] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 90.227539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.495288] agpgart: Detected VIA KM400/KM400A chipset
[ 90.507102] agpgart: AGP aperture is 128M @ 0xd0000000
[ 90.539554] input: Power Button (FF) as /devices/virtual/input/input4
[ 90.567399] ACPI: Power Button (FF) [PWRF]
[ 90.567492] input: Power Button (CM) as /devices/virtual/input/input5
[ 90.591393] ACPI: Power Button (CM) [PWRB]
[ 92.557555] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 92.557562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 92.557572] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 92.557717] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 96.677267] Adding 377488k swap on /dev/sda6. Priority:-1 extents:1 across:377488k
[ 97.273164] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 98.586767] No dock devices found.
[ 102.820047] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 102.820056] apm: overridden by ACPI.
[ 103.003271] lp0: using parport0 (interrupt-driven).
[ 103.072322] ppdev: user-space parallel port driver
[ 109.479780] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 109.719799] Bluetooth: Core ver 2.11
[ 109.721258] NET: Registered protocol family 31
[ 109.721265] Bluetooth: HCI device and connection manager initialized
[ 109.721272] Bluetooth: HCI socket layer initialized
[ 109.941692] Bluetooth: L2CAP ver 2.9
[ 109.941701] Bluetooth: L2CAP socket layer initialized
[ 109.960273] Bluetooth: RFCOMM socket layer initialized
[ 109.960322] Bluetooth: RFCOMM TTY layer initialized
[ 109.960325] Bluetooth: RFCOMM ver 1.8
[ 113.243298] NET: Registered protocol family 17
[ 115.892563] [drm] Initialized drm 1.1.0 20060810
[ 115.934952] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 115.936271] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 115.943944] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 115.944921] agpgart: Device is in legacy mode, falling back to 2.x
[ 115.944931] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 115.944972] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 123.104670] NET: Registered protocol family 10
[ 123.105737] lo: Disabled Privacy Extensions
[ 133.346555] eth0: no IPv6 routers present
[ 296.829974] kjournald starting. Commit interval 5 seconds
[ 296.830703] EXT3 FS on sda7, internal journal
[ 296.830714] EXT3-fs: mounted filesystem with ordered data mode.
[ 353.255595] kjournald starting. Commit interval 5 seconds
[ 353.256377] EXT3 FS on sda9, internal journal
[ 353.256389] EXT3-fs: mounted filesystem with ordered data mode.
[ 759.211082] usb 4-5: USB disconnect, address 2
[ 1757.243462] kjournald starting. Commit interval 5 seconds
[ 1757.244427] EXT3 FS on sda9, internal journal
[ 1757.244441] EXT3-fs: mounted filesystem with ordered data mode.
[ 2226.517018] kjournald starting. Commit interval 5 seconds
[ 2226.517773] EXT3 FS on sda7, internal journal
[ 2226.517785] EXT3-fs: mounted filesystem with ordered data mode.
[ 2448.275722] kjournald starting. Commit interval 5 seconds
[ 2448.276476] EXT3 FS on sda3, internal journal
[ 2448.276488] EXT3-fs: mounted filesystem with ordered data mode.
[ 2467.274149] kjournald starting. Commit interval 5 seconds
[ 2467.275011] EXT3 FS on sda8, internal journal
[ 2467.275023] EXT3-fs: mounted filesystem with ordered data mode.
[ 2479.327410] kjournald starting. Commit interval 5 seconds
[ 2479.328280] EXT3 FS on sda10, internal journal
[ 2479.328293] EXT3-fs: mounted filesystem with ordered data mode.

ubuntu@ubuntu:/media/disk/log$ sudo fdisk -l /dev/sda
Disk /dev/sda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa89e44b9
Device Boot Start End Blocks Id System
/dev/sda1 * 1 637 5116671 7 HPFS/NTFS
/dev/sda2 638 10003 75232395 f W95 Ext'd (LBA)
/dev/sda3 10004 10011 64260 83 Linux
/dev/sda5 638 2549 15358108+ b W95 FAT32
/dev/sda6 2550 2596 377496 83 Linux
/dev/sda7 2597 2900 2441848+ 83 Linux
/dev/sda8 2901 3386 3903763+ 83 Linux
/dev/sda9 3387 3751 2931831 83 Linux
/dev/sda10 3752 4359 4883728+ 83 Linux
/dev/sda11 4360 10003 45335398+ 83 Linux

That's all I got through the LiveCD, Please tell me anything I should offer.

Thanks very much.
jazzi

Last edited by jazzi (2009-01-17 06:10:49)

Ranguvar · 2009-01-17 07:13:28

Holy hell. Pastebin, please.

Did you try using the failsafe boot? If that works, your initramfs needs to be reworked.

Arch Linux

#1 2009-01-04 03:00:27

How to upgrade from 2007.3 Vodoo?

#2 2009-01-04 03:32:30

Re: How to upgrade from 2007.3 Vodoo?

#3 2009-01-04 05:39:00

Re: How to upgrade from 2007.3 Vodoo?

#4 2009-01-04 06:48:14

Re: How to upgrade from 2007.3 Vodoo?

#5 2009-01-04 07:03:16

Re: How to upgrade from 2007.3 Vodoo?

#6 2009-01-04 12:06:36

Re: How to upgrade from 2007.3 Vodoo?

#7 2009-01-04 12:08:57

Re: How to upgrade from 2007.3 Vodoo?

#8 2009-01-04 12:38:17

Re: How to upgrade from 2007.3 Vodoo?

#9 2009-01-05 12:12:12

Re: How to upgrade from 2007.3 Vodoo?

#10 2009-01-17 05:55:20

Re: How to upgrade from 2007.3 Vodoo?

#11 2009-01-17 06:02:39

Re: How to upgrade from 2007.3 Vodoo?

#12 2009-01-17 06:06:15

Re: How to upgrade from 2007.3 Vodoo?

#13 2009-01-17 06:09:36

Re: How to upgrade from 2007.3 Vodoo?

#14 2009-01-17 07:13:28

Re: How to upgrade from 2007.3 Vodoo?

Board footer