You are not logged in.

Pages: 1

#1 2009-01-11 19:46:33

ShadowKyogre
Member
From: Hell! XP No... I'm not telling
Registered: 2008-12-19
Posts: 476
Website

Entrance goes back to itself + Does not list session types. [SOLVED]

Entrance goes back to itself + Does not list session types.

Last edited by ShadowKyogre (2009-01-11 20:54:39)

For every problem, there is a solution that is:
Clean
Simple and most of all...wrong!
Github page

Offline

#2 2009-01-11 19:53:42

pressh
Developer/TU
From: Netherlands
Registered: 2005-08-14
Posts: 1,719

Re: Entrance goes back to itself + Does not list session types. [SOLVED]

ShadowKyogre wrote:

Entrance goes back to itself + Does not list session types.

Please post your Xorg.0.log.

It goes back to itself after you do exactly what?
What sessions do you have installed that should be listed?

Offline

#3 2009-01-11 19:58:12

ShadowKyogre
Member
From: Hell! XP No... I'm not telling
Registered: 2008-12-19
Posts: 476
Website

Re: Entrance goes back to itself + Does not list session types. [SOLVED]

Logging in. I have KDEMod3 and E17.

Xorg.0.log:

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686 
Current Operating System: Linux myhost 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008 i686
Build Date: 17 December 2008  08:20:05PM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 11 11:42:53 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/100dpi:unscaled,
    /usr/local/share/fonts,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter rev 0, Mem @ 0xb0000000/0, 0xcfec0000/0, I/O @ 0x0000bc00/0, BIOS @ 0x????????/65536
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "type1"

(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "sis"

(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.10.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
    SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:0:0) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:1:0) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:0) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:1) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:2) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:3) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:5) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:7) found
(WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:0) found
(--) Assigning device section with no busID to primary device
(--) Chipset SIS315PRO/E found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.5.3.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xBC00
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) SIS(0): Depth 16, (--) framebuffer bpp 16
(==) SIS(0): RGB weight 565
(==) SIS(0): Default visual is TrueColor
(--) SIS(0): Video BIOS version "1.13.00" found (old SiS data layout)
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
        http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): DRAM type: Single channel 1 rank SDR SDRAM
(--) SIS(0): Memory clock: 143.180 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xB0000000
(--) SIS(0): MMIO registers at 0xCFEC0000 (size 64K)
(--) SIS(0): VideoRAM: 65536 KB
(II) SIS(0): Using 64960K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports one video overlay
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): Gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction is disabled
(--) SIS(0): Using Xv overlay by default on CRT1
(--) SIS(0): Memory bandwidth at 16 bpp is 572.72 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT1 DDC supported
(--) SIS(0): CRT1 DDC level: 2 
(--) SIS(0): CRT1 DDC monitor info: *******************************************
(II) SIS(0): Manufacturer: EPI  Model: d775  Serial#: 871051
(II) SIS(0): Year: 2003  Week: 38
(II) SIS(0): EDID Version: 1.3
(II) SIS(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) SIS(0): Sync:  Separate
(II) SIS(0): Max Image Size [cm]: horiz.: 32  vert.: 24
(II) SIS(0): Gamma: 2.20
(II) SIS(0): DPMS capabilities: Off; RGB/Color Display
(II) SIS(0): First detailed timing is preferred mode
(II) SIS(0): redX: 0.631 redY: 0.329   greenX: 0.276 greenY: 0.600
(II) SIS(0): blueX: 0.143 blueY: 0.057   whiteX: 0.283 whiteY: 0.297
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): 720x400@70Hz
(II) SIS(0): 640x480@60Hz
(II) SIS(0): 640x480@75Hz
(II) SIS(0): 800x600@75Hz
(II) SIS(0): 1024x768@75Hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported Future Video Modes:
(II) SIS(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) SIS(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) SIS(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) SIS(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 94.5 MHz   Image Size:  310 x 230 mm
(II) SIS(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) SIS(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) SIS(0): Supported additional Video Mode:
(II) SIS(0): clock: 56.2 MHz   Image Size:  310 x 230 mm
(II) SIS(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
(II) SIS(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
(II) SIS(0): Monitor name: EN-775e
(II) SIS(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) SIS(0): EDID (in hex):
(II) SIS(0):     d4431d08000000000f000000c89bd4bf
(II) SIS(0):     41ffffffd0619108d4431d08f89bd4bf
(II) SIS(0):     aa140c08d061910801000000d0619108
(II) SIS(0):     2c9cd4bf0000000020bb1f08009bc5b7
(II) SIS(0):     d400000040000000f49fc5b74c000000
(II) SIS(0):     0a9cd4bf189cd4bf3beeb5b7a19cd4bf
(II) SIS(0):     b3c11b08289cd4bf9b9cd4bfb89cd4bf
(II) SIS(0):     9f980f08919cd4bf73c11b0808000000
(II) SIS(0): EDID vendor "EPI", prod id 55157
(II) SIS(0): Using hsync ranges from config file
(II) SIS(0): Using vrefresh ranges from config file
(II) SIS(0): Printing DDC gathered Modelines:
(II) SIS(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) SIS(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) SIS(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) SIS(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) SIS(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) SIS(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) SIS(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) SIS(0): Modeline "640x480"x85.0   35.71  640 672 736 832  480 481 484 505 -hsync +vsync (42.9 kHz)
(II) SIS(0): Modeline "800x600"x85.0   56.55  800 840 928 1056  600 601 604 630 -hsync +vsync (53.5 kHz)
(II) SIS(0): Modeline "1024x768"x85.0   94.39  1024 1088 1200 1376  768 769 772 807 -hsync +vsync (68.6 kHz)
(II) SIS(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.33:1 (normal)
(--) SIS(0): End of CRT1 DDC monitor info *************************************
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 390 MHz
(II) SIS(0): Replaced default mode list with built-in modes
(II) SIS(0): Using fake widescreen modes for CRT1 VGA devices
(II) SIS(0):     Use option "ForceCRT1VGAAspect" to overrule
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Monitor0: Using hsync range of 28.00-96.00 kHz
(II) SIS(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz
(II) SIS(0): Monitor0: Using maximum pixel clock of 110.00 MHz
(II) SIS(0): Clock range:  10.00 to 390.00 MHz
(II) SIS(0): Not using mode "640x350" (vrefresh out of range)
(II) SIS(0): Not using mode "640x400" (vrefresh out of range)
(II) SIS(0): Not using mode "720x400" (vrefresh out of range)
(II) SIS(0): Not using mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using mode "1280x960" (vrefresh out of range)
(II) SIS(0): Not using mode "1280x1024" (mode clock too high)
(II) SIS(0): Not using mode "1280x1024" (vrefresh out of range)
(II) SIS(0): Not using mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using mode "1792x1344" (mode clock too high)
(II) SIS(0): Not using mode "1792x1344" (hsync out of range)
(II) SIS(0): Not using mode "1856x1392" (mode clock too high)
(II) SIS(0): Not using mode "1856x1392" (hsync out of range)
(II) SIS(0): Not using mode "1920x1440" (mode clock too high)
(II) SIS(0): Not using mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using mode "1800x1440" (mode clock too high)
(II) SIS(0): Not using mode "1800x1440" (hsync out of range)
(II) SIS(0): Not using mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using mode "768x576" (vrefresh out of range)
(II) SIS(0): Not using mode "768x576" (vrefresh out of range)
(II) SIS(0): Not using mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using mode "1152x864" (vrefresh out of range)
(II) SIS(0): Not using mode "1152x864" (vrefresh out of range)
(II) SIS(0): Not using mode "1280x960" (mode clock too high)
(II) SIS(0): Not using mode "1280x960" (mode clock too high)
(II) SIS(0): Not using mode "1280x960" (hsync out of range)
(II) SIS(0): Not using mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using mode "1400x1050" (mode clock too high)
(II) SIS(0): Not using mode "1400x1050" (mode clock too high)
(II) SIS(0): Not using mode "1400x1050" (mode clock too high)
(II) SIS(0): Not using mode "1400x1050" (vrefresh out of range)
(II) SIS(0): Not using mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using driver mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using driver mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using driver mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x1024" (mode clock too high)
(II) SIS(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SIS(0): Not using default mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using default mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using default mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using default mode "1600x1200" (mode clock too high)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (mode clock too high)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (mode clock too high)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (mode clock too high)
(II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x960" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x768" (mode clock too high)
(II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1400x1050" (mode clock too high)
(II) SIS(0): Not using default mode "1400x1050" (mode clock too high)
(II) SIS(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x800" (mode clock too high)
(II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
(II) SIS(0): Not using default mode "1680x1050" (mode clock too high)
(II) SIS(0): Not using default mode "1280x854" (mode clock too high)
(II) SIS(0): Not using default mode "1280x854" (vrefresh out of range)
(II) SIS(0): Not using driver mode "1280x1024" (width too large for virtual size)
(II) SIS(0): Not using driver mode "1280x1024" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) SIS(0): Not using mode "1280x960" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x960" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x854" (width too large for virtual size)
(II) SIS(0): Not using default mode "1360x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x800" (width too large for virtual size)
(II) SIS(0): Not using mode "1152x864" (width too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x720" (width too large for virtual size)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): *Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) SIS(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) SIS(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SIS(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SIS(0):  Mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) SIS(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) SIS(0):  Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) SIS(0):  Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz
(II) SIS(0): Modeline "1024x768"x70.2   75.17  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.6 kHz)
(**) SIS(0):  Mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) SIS(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) SIS(0):  Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x768"x60.1   65.15  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.5 kHz)
(**) SIS(0):  Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SIS(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) SIS(0):  Default mode "1024x576": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) SIS(0): Modeline "1024x576"x75.0   78.75  1024 1040 1136 1312  576 686 690 800 +hsync +vsync (60.0 kHz)
(**) SIS(0):  Default mode "1024x576": 65.1 MHz, 48.5 kHz, 60.1 Hz
(II) SIS(0): Modeline "1024x576"x60.1   65.15  1024 1048 1184 1344  576 688 694 806 +hsync +vsync (48.5 kHz)
(**) SIS(0):  Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600"x60.0   41.50  960 1008 1088 1120  600 603 609 618 +hsync +vsync (37.1 kHz)
(**) SIS(0):  Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540"x60.0   37.29  960 976 1008 1104  540 543 549 563 +hsync +vsync (33.8 kHz)
(**) SIS(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0   49.52  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SIS(0):  Mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) SIS(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) SIS(0):  Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(II) SIS(0): Modeline "800x600"x72.4   50.11  800 856 976 1040  600 637 643 666 +hsync +vsync (48.2 kHz)
(**) SIS(0):  Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) SIS(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) SIS(0):  Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SIS(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SIS(0):  Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SIS(0):  Mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SIS(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SIS(0):  Mode "768x576": 45.5 MHz, 45.1 kHz, 75.0 Hz
(II) SIS(0): Modeline "768x576"x75.0   45.51  768 808 888 1008  576 577 580 602 -hsync +vsync (45.1 kHz)
(**) SIS(0):  Mode "768x576": 42.9 MHz, 43.3 kHz, 72.0 Hz
(II) SIS(0): Modeline "768x576"x72.0   42.93  768 800 880 992  576 577 580 601 -hsync +vsync (43.3 kHz)
(**) SIS(0):  Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "768x576"x60.1   35.00  768 792 872 976  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0):  Mode "768x576": 35.0 MHz, 35.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "768x576"x60.0   34.96  768 792 872 976  576 577 580 597 -hsync +vsync (35.8 kHz)
(**) SIS(0):  Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "720x576"x60.1   32.73  720 744 816 912  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0):  Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480"x59.8   33.94  856 872 1000 1072  480 492 495 529 -hsync -vsync (31.7 kHz)
(**) SIS(0):  Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz
(II) SIS(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 -hsync -vsync (31.0 kHz)
(**) SIS(0):  Default mode "800x480": 49.5 MHz, 46.9 kHz, 75.1 Hz
(II) SIS(0): Modeline "800x480"x75.1   49.52  800 816 896 1056  480 551 554 624 +hsync +vsync (46.9 kHz)
(**) SIS(0):  Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480"x60.0   39.77  800 840 968 1056  480 552 556 628 +hsync +vsync (37.7 kHz)
(**) SIS(0):  Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480"x61.0   28.28  720 728 840 896  480 490 492 517 -hsync -vsync (31.6 kHz)
(**) SIS(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SIS(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SIS(0):  Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SIS(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) SIS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) SIS(0):  Mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) SIS(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) SIS(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) SIS(0):  Mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SIS(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SIS(0):  Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 492 525 -hsync -vsync (31.3 kHz)
(**) SIS(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) SIS(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) SIS(0):  Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400"x71.6   25.06  640 656 752 792  400 413 415 442 -hsync +vsync (31.6 kHz)
(**) SIS(0):  Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384"x60.1   32.57  512 528 592 672  384 385 388 403 doublescan -hsync -vsync (48.5 kHz)
(**) SIS(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SIS(0):  Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync (31.3 kHz)
(**) SIS(0):  Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200"x70.9   12.53  320 328 376 400  200 206 207 221 doublescan -hsync +vsync (31.3 kHz)
(**) SIS(0): Display dimensions: (320, 240) mm
(**) SIS(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
(II) SIS(0): 2D acceleration enabled
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 65472 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 315
(II) SIS(0): VESA VBE OEM Product Rev: 1.13.00
(II) SIS(0): Setting custom mode 1024x768 on CRT1
(II) SIS(0): Setting custom mode 1024x768 on CRT2
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1023,32478)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    8x8 color pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
        32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1659.60Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0):     Checked libc memcpy()...     213.2 MiB/s
(--) SIS(0):     Checked built-in-1 memcpy()...     213.3 MiB/s
(--) SIS(0):     Checked built-in-2 memcpy()...     46.1 MiB/s
(--) SIS(0):     Checked MMX memcpy()...     212.0 MiB/s
(--) SIS(0):     Checked 3DNow! memcpy()...     212.0 MiB/s
(--) SIS(0):     Checked MMX2 memcpy()...     211.9 MiB/s
(--) SIS(0): Using built-in-1 method for aligned data transfers to video RAM
(--) SIS(0): Using built-in-1 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms" "true"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv by default on CRT1
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) PS/2 Mouse: Setting mouse protocol to "ExplorerPS/2"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) PS/2 Mouse: Setting mouse protocol to "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed

Loggin into E17 via KDM works fine though.

Last edited by ShadowKyogre (2009-01-11 20:35:26)

For every problem, there is a solution that is:
Clean
Simple and most of all...wrong!
Github page

Offline

#4 2009-01-11 20:53:41

ShadowKyogre
Member
From: Hell! XP No... I'm not telling
Registered: 2008-12-19
Posts: 476
Website

Re: Entrance goes back to itself + Does not list session types. [SOLVED]

Wait...I got it to work! I apparently had to make it from the AUR.

For every problem, there is a solution that is:
Clean
Simple and most of all...wrong!
Github page

Offline

Pages: 1

Board footer

Powered by FluxBB