You are not logged in.

Pages: 1

#1 2009-01-26 09:43:37

vis
Member
From: Switzerland
Registered: 2007-02-25
Posts: 81

X freezes after update

I ran a complete update two days ago. The console works fine but X freezes.

I get the identical OpenBox desktop with conky, and the mouse cursor too. But can't move the
mouse, can't exit X with Ctrl-Alt-BS, can't go to virtual terminals (Alt-Ctrl-F2-6). Have to hard
reset.

This is a Dell latitude with a ATI Mobility Radeon X300 graphic card. Screen has native 1600x1050.

By trying various alternatives I might have broke xorg.conf. It is OK to start from scratch.

Offline

#2 2009-01-26 10:02:38

muczyjoe
Member
From: Szeged (Hungary)
Registered: 2007-05-16
Posts: 45
Website

Re: X freezes after update

Xorg.log pastebin? It would help a lot, I think.

Offline

#3 2009-01-26 10:12:04

vis
Member
From: Switzerland
Registered: 2007-02-25
Posts: 81

Re: X freezes after update

Hier is Xorg.0.log:

 X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686 
Current Operating System: Linux localhost 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686
Build Date: 17 December 2008  08:20:05PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 26 11:03:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        /usr/share/fonts/Type1,
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
        X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) ATI Technologies Inc M22 [Mobility Radeon X300] rev 0, Mem @ 0xd0000000/0, 0xdfdf0000/0, I/O @ 0x0000de00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.5.3, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 7.4.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 7.4.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"

(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.4.99.906, module version = 8.56.4
        Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561                                
(II) ATI Proprietary Linux Driver Build Date: Dec  1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x5460) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x9ecca60
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b]
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b]
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b]
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 0.1.0
        ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 1.4.99.906, module version = 8.56.4
        ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI MOBILITY RADEON X300" (Chipset = 0x5460)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2006)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfdf0000
(--) fglrx(0): I/O port at 0x0000de00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.1.0
        ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 65472 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON (M24)  
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: CP22
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x8000000)
(--) fglrx(0): Video RAM: 65536 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0):  Display1: No EDID information from DDC.
(EE) fglrx(0): Unknown EDID version 0
(II) fglrx(0):  Display1: Failed to get EDID information. 
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  5 power states available:
(II) fglrx(0):   1. 297/216MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 105/122MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   3. 105/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0):   4. 209/182MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   5. 209/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 0)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1448 1560 1688  1050 1051 1055 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1384 1496 1688  1024 1038 1042 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1384 1496 1688  768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1256 1368 1688  768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1144 1256 1688  600 826 830 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1064 1176 1688  480 766 770 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1064 1176 1688  400 726 730 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1064 1176 1688  350 701 705 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  108.00  512 1000 1112 1688  384 718 722 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  108.00  400 944 1056 1688  300 826 830 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  108.00  320 904 1016 1688  240 766 770 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  108.00  320 904 1016 1688  200 726 730 1066 doublescan (64.0 kHz)
(==) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1448 1560 1688  1050 1051 1055 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1384 1496 1688  1024 1038 1042 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1384 1496 1688  768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1256 1368 1688  768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1144 1256 1688  600 826 830 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1064 1176 1688  480 766 770 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1064 1176 1688  400 726 730 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1064 1176 1688  350 701 705 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  108.00  512 1000 1112 1688  384 718 722 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  108.00  400 944 1056 1688  300 826 830 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  108.00  320 904 1016 1688  240 766 770 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  108.00  320 904 1016 1688  200 726 730 1066 doublescan (64.0 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.2.1
        ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): Battery is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f3a000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.56.4
(II) fglrx(0):     Date: Dec  1 2008
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.28-ARCH
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x007b1000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1432)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 382
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Solid Lines
        Dashed Lines
        Setting up tile and stipple cache:
                22 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"

(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
        compiled for 1.4.99.906, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0

Offline

#4 2009-01-26 11:25:25

ghaad
Member
From: Czech Republic, EU
Registered: 2009-01-23
Posts: 21

Re: X freezes after update

See the page "beginner's guide" section 3.3.3 in the wiki: http://wiki.archlinux.org/index.php/Beg … otplugging
I think it's OK to just delete to config file and either start without it (=autodetection) or let X generate a new one. I had also the freezing problem (but after a new installation) - it is also covered in the beginner's wiki. But maybe your problem is more complex than mine, I didn't read all through your X log.

GNUniverse - May the source be with you...

Offline

#5 2009-01-26 23:32:09

vis
Member
From: Switzerland
Registered: 2007-02-25
Posts: 81

Re: X freezes after update

Hi

It was exactly the problem documented in http://wiki.archlinux.org/index.php/Beg … otplugging

Disabling it with a section like this solved it!

Section "ServerFlags"
    Option "AutoAddDevices" "False"
EndSection

Thanks you guys.

Offline

#6 2009-01-27 10:47:58

ghaad
Member
From: Czech Republic, EU
Registered: 2009-01-23
Posts: 21

Re: X freezes after update

Wow cool
Glad I could help.

GNUniverse - May the source be with you...

Offline

Pages: 1

Board footer

Powered by FluxBB