Sluggish laptop with Xorg

zanian · 2009-06-05 22:53:13

Hey,
I just bought a laptop a few weeks ago and I installed the 64 bit Arch. When running fluxbox, it was running very slowly. Firefox windows dragged, Mplayer was unusable for video files that were fine on my desktop that is less powerful, VLC ran alright as long as the window was tiny. In general the laptop runs extremely sluggishly, is overheated all the time and its battery lasts about 20 - 30 mins. My brother, who bought the exact same laptop as me is running Ubuntu 9.04 i686, which runs smoothly with about 4 hours battery life. I tried a live CD of it and a March Linux live CD, both of which ran very smoothly on my laptop. So, I talked to a friend and he suggested it might be since I was running 64 bit. So I installed 32 bit Arch and it is running jsut as slow. I've tried running both fluxbox and blackbox under the 64 version and the same results. I am guessing it has something to do with Xorg, but my knowledge of these things is minimal. Anyway, I'm attaching what I think is relevant.

uname -a:

Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686 AMD Turion(tm) X2 Dual-Core Mobile RM-74 AuthenticAMD GNU/Linux

lspci:

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Hewlett-Packard Company Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
08:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
08:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
08:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
08:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
09:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

cat /proc/cpuinfo:

processor    : 0
vendor_id    : AuthenticAMD
cpu family    : 17
model        : 3
model name    : AMD Turion(tm) X2 Dual-Core Mobile RM-74
stepping    : 1
cpu MHz        : 2200.080
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 0
cpu cores    : 2
apicid        : 0
initial apicid    : 0
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 1
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch osvw skinit
bogomips    : 4401.50
clflush size    : 64
power management: ts ttp tm stc 100mhzsteps hwpstate

processor    : 1
vendor_id    : AuthenticAMD
cpu family    : 17
model        : 3
model name    : AMD Turion(tm) X2 Dual-Core Mobile RM-74
stepping    : 1
cpu MHz        : 2200.080
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 1
cpu cores    : 2
apicid        : 1
initial apicid    : 1
fdiv_bug    : no
hlt_bug        : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 1
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch osvw skinit
bogomips    : 4391.33
clflush size    : 64
power management: ts ttp tm stc 100mhzsteps hwpstate

xorg.conf:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "USB Mouse" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
    Option "DontZap" "false"
    Option "AllowMouseOpenFail"  "true"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dri2"
    Load  "record"
    Load  "dri"
    Load  "dbe"
    Load  "extmod"
    Load  "glx"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
    Option        "SendCoreEvents"    "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

Section "Monitor"
    #DisplaySize      370   230    # mm
    Identifier   "Monitor0"
    VendorName   "LPL"
    ModelName    "2388"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "DynamicClocks"          # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
        #Option     "EXAVSync"               # [<bool>]
        #Option     "ATOMTVOut"              # [<bool>]
        #Option     "R4xxATOM"               # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "RS780M/RS780MN [Radeon HD 3200 Graphics]"
    BusID       "PCI:1:5:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Thanks in advance guys!

Damnshock · 2009-06-06 07:40:26

We need more information. What about "dmesg"? Is your cpu running at high load?

Lexion · 2009-06-06 13:22:12

Have you tried a non-blackbox-based WM? Does you laptop heat up after a while (30 seconds) running fluxbox?

zanian · 2009-06-06 18:34:06

I just tried xfce4. It was the same. It happens no matter what I run by the way and it is never better or worse. It is very static in speed. I can run 20 programs or 2 and it is about the same speed. Thanks guys.

Here is dmesg:

Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000afd70000 (usable)
 BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved)
 BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable)
 BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS)
 BIOS-e820: 00000000afebf000 - 00000000afeed000 (usable)
 BIOS-e820: 00000000afeed000 - 00000000afeff000 (ACPI data)
 BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
 BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
last_pfn = 0xaff00 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 2 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 0000000000007000 (usable)
 modified: 0000000000007000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 0000000000092c00 (usable)
 modified: 000000000009fc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000afd70000 (usable)
 modified: 00000000afd70000 - 00000000afdbf000 (reserved)
 modified: 00000000afdbf000 - 00000000afe58000 (usable)
 modified: 00000000afe58000 - 00000000afebf000 (ACPI NVS)
 modified: 00000000afebf000 - 00000000afeed000 (usable)
 modified: 00000000afeed000 - 00000000afeff000 (ACPI data)
 modified: 00000000afeff000 - 00000000aff00000 (usable)
 modified: 00000000e0000000 - 00000000e1000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff56000 - 7ffef985
Allocated new RAMDISK: 005a6000 - 0063f985
Move RAMDISK from 000000007ff56000 - 000000007ffef984 to 005a6000 - 0063f984
ACPI: RSDP 000FE020, 0024 (r2 HP    )
ACPI: XSDT AFEFE120, 005C (r1 HPQOEM SLIC-MPC        1       1000013)
ACPI: FACP AFEFD000, 00F4 (r4 HP     TRINITY         3 LOHR  1000013)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT AFEF0000, 9FEA (r1 HP     TRINITY  F0000000 LOHR  1000013)
ACPI: FACS AFE61000, 0040
ACPI: HPET AFEFC000, 0038 (r1 HPQOEM SLIC-MPC        1 LOHR  1000013)
ACPI: APIC AFEFB000, 0084 (r2 HPQOEM SLIC-MPC        1 LOHR  1000013)
ACPI: MCFG AFEFA000, 003C (r1 HPQOEM SLIC-MPC        1 LOHR  1000013)
ACPI: BOOT AFEEF000, 0028 (r1 HPQOEM SLIC-MPC        1 LOHR  1000013)
ACPI: SLIC AFEEE000, 0176 (r1 HPQOEM SLIC-MPC        1 LOHR  1000013)
ACPI: SSDT AFEED000, 0386 (r1 AMD    PowerNow        1 AMD         1)
ACPI: Local APIC address 0xfee00000
1927MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00005a2604]    TEXT DATA BSS ==> [0000100000 - 00005a2604]
  #4 [00005a3000 - 00005a6000]    INIT_PG_TABLE ==> [00005a3000 - 00005a6000]
  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [00005a6000 - 000063f985]      NEW RAMDISK ==> [00005a6000 - 000063f985]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000aff00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000006 -> 0x00000007
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x000afd70
    0: 0x000afdbf -> 0x000afe58
    0: 0x000afebf -> 0x000afeed
    0: 0x000afeff -> 0x000aff00
On node 0 totalpages: 720317
free_area_init_node: node 0, pgdat c0430600, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3941 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 3855 pages used for memmap
  HighMem zone: 489259 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 0000000000007000 - 0000000000010000
PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at b0000000 (gap: aff00000:30100000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 714686
Kernel command line: root=/dev/disk/by-uuid/52716d89-6d65-43c6-ae84-6916cfd33488 ro vga=773
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2200.245 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2851452k/2882560k available (2363k kernel code, 28916k reserved, 1059k data, 340k init, 1972456k highmem)
virtual kernel memory layout:
    fixmap  : 0xffee8000 - 0xfffff000   (1116 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc045d000 - 0xc04b2000   ( 340 kB)
      .data : 0xc034ec74 - 0xc0457a88   (1059 kB)
      .text : 0xc0100000 - 0xc034ec74   (2363 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4402.84 BogoMIPS (lpj=7334150)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-74 stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4391.22 BogoMIPS (lpj=7315565)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Turion(tm) X2 Dual-Core Mobile RM-74 stepping 01
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 214794579 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (8793.07 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Enabling special treatment for EC from MSI.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
_OSC request fails
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: reg 10 io port: [0x8038-0x803f]
pci 0000:00:11.0: reg 14 io port: [0x804c-0x804f]
pci 0000:00:11.0: reg 18 io port: [0x8030-0x8037]
pci 0000:00:11.0: reg 1c io port: [0x8048-0x804b]
pci 0000:00:11.0: reg 20 io port: [0x8010-0x801f]
pci 0000:00:11.0: reg 24 32bit mmio: [0xd2508000-0xd25083ff]
pci 0000:00:12.0: reg 10 32bit mmio: [0xd2507000-0xd2507fff]
pci 0000:00:12.1: reg 10 32bit mmio: [0xd2506000-0xd2506fff]
pci 0000:00:12.2: reg 10 32bit mmio: [0xd2508500-0xd25085ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xd2505000-0xd2505fff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xd2504000-0xd2504fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xd2508400-0xd25084ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0x8000-0x800f]
pci 0000:00:14.2: reg 10 64bit mmio: [0xd2500000-0xd2503fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:05.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:05.0: reg 14 io port: [0x7000-0x70ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xd2400000-0xd240ffff]
pci 0000:01:05.0: reg 24 32bit mmio: [0xd2300000-0xd23fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: reg 10 32bit mmio: [0xd2410000-0xd2413fff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x7000-0x7fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd2300000-0xd24fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:04.0: bridge io port: [0x3000-0x6fff]
pci 0000:00:04.0: bridge 32bit mmio: [0xd1300000-0xd22fffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xd0ffffff]
pci 0000:08:00.0: reg 10 32bit mmio: [0xd1200300-0xd12003ff]
pci 0000:08:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
pci 0000:08:00.2: reg 10 32bit mmio: [0xd1200200-0xd12002ff]
pci 0000:08:00.3: reg 10 32bit mmio: [0xd1200100-0xd12001ff]
pci 0000:08:00.4: reg 10 32bit mmio: [0xd1200000-0xd12000ff]
pci 0000:00:05.0: bridge 32bit mmio: [0xd1200000-0xd12fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xd1100000-0xd110ffff]
pci 0000:00:06.0: bridge 32bit mmio: [0xd1100000-0xd11fffff]
pci 0000:0a:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:0a:00.0: reg 18 64bit mmio: [0xd1010000-0xd1010fff]
pci 0000:0a:00.0: reg 20 64bit mmio: [0xd1000000-0xd100ffff]
pci 0000:0a:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xd1000000-0xd10fffff]
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
_OSC request fails
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet: hpet2 irq 24 for MSI
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:08: ioport range 0x400-0x4cf has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x680-0x6ff has been reserved
system 00:08: ioport range 0x77a-0x77a has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd0-0xcdb has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x7000-0x7fff
pci 0000:00:01.0:   MEM window: 0xd2300000-0xd24fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0:   IO window: 0x3000-0x6fff
pci 0000:00:04.0:   MEM window: 0xd1300000-0xd22fffff
pci 0000:00:04.0:   PREFETCH window: 0x000000d0000000-0x000000d0ffffff
pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
pci 0000:00:05.0:   IO window: disabled
pci 0000:00:05.0:   MEM window: 0xd1200000-0xd12fffff
pci 0000:00:05.0:   PREFETCH window: 0x000000b0000000-0x000000b00fffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
pci 0000:00:06.0:   IO window: disabled
pci 0000:00:06.0:   MEM window: 0xd1100000-0xd11fffff
pci 0000:00:06.0:   PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:07.0:   IO window: 0x2000-0x2fff
pci 0000:00:07.0:   MEM window: 0xb0100000-0xb01fffff
pci 0000:00:07.0:   PREFETCH window: 0x000000d1000000-0x000000d10fffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
pci 0000:00:14.4:   IO window: 0x1000-0x1fff
pci 0000:00:14.4:   MEM window: disabled
pci 0000:00:14.4:   PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x7000-0x7fff]
pci_bus 0000:01: resource 1 mem: [0xd2300000-0xd24fffff]
pci_bus 0000:01: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io:  [0x3000-0x6fff]
pci_bus 0000:02: resource 1 mem: [0xd1300000-0xd22fffff]
pci_bus 0000:02: resource 2 mem: [0xd0000000-0xd0ffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:08: resource 0 mem: [0x0-0x0]
pci_bus 0000:08: resource 1 mem: [0xd1200000-0xd12fffff]
pci_bus 0000:08: resource 2 mem: [0xb0000000-0xb00fffff]
pci_bus 0000:08: resource 3 mem: [0x0-0x0]
pci_bus 0000:09: resource 0 mem: [0x0-0x0]
pci_bus 0000:09: resource 1 mem: [0xd1100000-0xd11fffff]
pci_bus 0000:09: resource 2 mem: [0x0-0x0]
pci_bus 0000:09: resource 3 mem: [0x0-0x0]
pci_bus 0000:0a: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:0a: resource 1 mem: [0xb0100000-0xb01fffff]
pci_bus 0000:0a: resource 2 mem: [0xd1000000-0xd10fffff]
pci_bus 0000:0a: resource 3 mem: [0x0-0x0]
pci_bus 0000:80: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:80: resource 1 mem: [0x0-0x0]
pci_bus 0000:80: resource 2 mem: [0x0-0x0]
pci_bus 0000:80: resource 3 io:  [0x00-0xffff]
pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 614k freed
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1244298159.530:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1719
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:05.0: setting latency timer to 64
pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1536k, total 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=18
vesafb: protected mode interface info at c000:a1a8
vesafb: pmi: set display start = c00ca24a, set palette = c00ca308
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Clocksource tsc unstable (delta = -98914328 ns)
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 340k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
ata7: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22
ata3: softreset failed (device not ready)
ata3: failed due to HW bug, retry pmp=0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: FUJITSU MHZ2320BH G2, 8909, max UDMA/100
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 8909 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: softreset failed (device not ready)
ata6: failed due to HW bug, retry pmp=0
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RC04, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RC04 PQ: 0 ANSI: 5
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
Driver 'sr' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs: barriers enabled
kjournald2 starting: pid 645, dev sda3:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda3 with ordered data mode
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
udev: starting version 141
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (42 C)
acpi device:05: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input5
lis3lv02d: 1-byte sensor found
lis3lv02d: laptop model unknown, using default axes configuration
Registered led device: hp::hddprotect
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
lis3_init_device: irq 23
lis3: registering device
lis3lv02d driver loaded.
ACPI: WMI: Mapper loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:0a:00.0: setting latency timer to 64
r8169 0000:0a:00.0: irq 29 for MSI/MSI-X
eth0: RTL8102e at 0xf8452000, 00:23:5a:1e:e8:49, XID 24a00000 IRQ 29
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 5:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input7
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
jmb38x_ms 0000:08:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
jmb38x_ms 0000:08:00.3: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: setting latency timer to 64
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: setting latency timer to 64
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:14.2: setting latency timer to 64
usb 1-6: new high speed USB device using ehci_hcd and address 2
Error: Driver 'pcspkr' is already registered, aborting...
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:08:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA
sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:08:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:08:00.2: PCI INT A disabled
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ath_pci 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath_pci 0000:09:00.0: setting latency timer to 64
ath_pci: HAL doesn't support MAC revision 0xe2
ath_pci 0000:09:00.0: PCI INT A disabled
usb 1-6: configuration #1 chosen from 1 choice
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
Linux video capture interface: v2.00
input: HDA ATI SB Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:14.2/input/input9
input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/input/input10
ath5k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:09:00.0: setting latency timer to 64
ath5k 0000:09:00.0: registered as 'phy0'
input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/input/input11
uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input12
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:05.1: setting latency timer to 64
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
wmaster0 (ath5k): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: setting latency timer to 64
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: setting latency timer to 64
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
EXT4 FS on sda3, internal journal on sda3:8
EXT4-fs: barriers enabled
kjournald2 starting: pid 1933, dev sda1:8, commit interval 5 seconds
EXT4 FS on sda1, internal journal on sda1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda1 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 1934, dev sda4:8, commit interval 5 seconds
EXT4 FS on sda4, internal journal on sda4:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda4 with ordered data mode
Adding 2104504k swap on /dev/sda2.  Priority:-1 extents:1 across:2104504k 
r8169: eth0: link up
r8169: eth0: link up
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810

Edit: It seems without starting X, the battery drains just as fast. Performance seems fine but of course without X I am not running anything serious.

Last edited by zanian (2009-06-07 02:19:00)

Arch Linux

#1 2009-06-05 22:53:13

Sluggish laptop with Xorg

#2 2009-06-06 07:40:26

Re: Sluggish laptop with Xorg

#3 2009-06-06 13:22:12

Re: Sluggish laptop with Xorg

#4 2009-06-06 18:34:06

Re: Sluggish laptop with Xorg

Board footer