You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2009-06-25 00:47:33
- Bregol
- Member
- Registered: 2008-08-15
- Posts: 175
K3b / cdrecord stopped working
K3b used to work for me, maybe a couple months ago, but at least for DVD burning, it no longer works.
~/.kde4/share/apps/k3b/lastlog.log:
[cdrecord command:] /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr2 speed=16 -sao driveropts=burnfree -data -tsize=2249610s -
[cdrecord] /usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
[cdrecord] /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler.
[cdrecord] /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
[cdrecord] /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
[cdrecord] scsidev: '/dev/sr2'
[cdrecord] devname: '/dev/sr2'
[cdrecord] scsibus: -2 target: -2 lun: -2
[cdrecord] Warning: Open by 'devname' is unintentional and not supported.
[cdrecord] Linux sg driver version: 3.5.27
[cdrecord] SCSI buffer size: 64512
[cdrecord] /usr/bin/cdrecord: Warning: The DMA speed test has been skipped.
[cdrecord] Cdrecord-ProDVD-ProBD-Clone 2.01.01a60 (i686-pc-linux-gnu) Copyright (C) 1995-2009 Jrg Schilling
[cdrecord] TOC Type: 1 = CD-ROM
[cdrecord] Using libscg version 'schily-0.9'.
[cdrecord] Driveropts: 'burnfree'
[cdrecord] atapi: 1
[cdrecord] Device type : Removable CD-ROM
[cdrecord] Version : 0
[cdrecord] Response Format: 2
[cdrecord] Capabilities :
[cdrecord] Vendor_info : 'Memorex '
[cdrecord] Identifikation : 'DVD16+/-DL4RWlD2'
[cdrecord] Revision : 'JWS5'
[cdrecord] Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
[cdrecord] Current: DVD-R sequential recording
[cdrecord] Profile: DVD+R/DL
[cdrecord] Profile: DVD+R
[cdrecord] Profile: DVD+RW
[cdrecord] Profile: DVD-RW sequential recording
[cdrecord] Profile: DVD-RW restricted overwrite
[cdrecord] Profile: DVD-R sequential recording (current)
[cdrecord] Profile: DVD-ROM
[cdrecord] Profile: CD-RW
[cdrecord] Profile: CD-R
[cdrecord] Profile: CD-ROM
[cdrecord] Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
[cdrecord] Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
[cdrecord] Supported modes: PACKET SAO
[cdrecord] Drive buf size : 1563904 = 1527 KB
[cdrecord] FIFO size : 4194304 = 4096 KB
[cdrecord] /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler.
[cdrecord] /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
[cdrecord] /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
[cdrecord] Track 01: data 4393 MB
[cdrecord] Total size: 4393 MB = 2249610 sectors
[cdrecord] Current Secsize: 2048
[cdrecord] Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 48886
[cdrecord] Reducing transfer size from 64512 to 32768 bytes.
[cdrecord] Forcespeed is OFF.
[cdrecord] Starting to write CD/DVD/BD at speed 16 in real SAO mode for single session.
[cdrecord] Last chance to quit, starting real write in 3 seconds.
[cdrecord] 2 seconds.
[cdrecord] 1 seconds.
[cdrecord] 0 seconds. Operation starts.
[cdrecord] Waiting for reader process to fill input buffer ... input buffer ready.
[cdrecord] BURN-Free is OFF.
[cdrecord] Turning BURN-Free on
[cdrecord] Starting new track at sector: 0
[cdrecord] Track 01: 0 of 4393 MB written.
[cdrecord] Track 01: 1 of 4393 MB written (fifo 98%) [buf 82%] 0.0x.
[cdrecord] /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
[cdrecord] CDB: 2A 00 00 00 02 E0 00 00 10 00
[cdrecord] status: 0x0 (GOOD STATUS)
[cdrecord] cmd finished after 40.721s timeout 200s
[cdrecord] /usr/bin/cdrecord: A write error occured.
[cdrecord] /usr/bin/cdrecord: Please properly read the error message above.
[cdrecord] /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
[cdrecord] CDB: 00 00 00 00 00 00
[cdrecord] status: 0x0 (GOOD STATUS)
[cdrecord] cmd finished after 0.000s timeout 200s
[cdrecord] write track data: error after 1507328 bytes
[cdrecord] Writing time: 109.836s
[cdrecord] Average write speed 30.3x.
[cdrecord] Fixating...
[cdrecord] /usr/bin/cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
[cdrecord] CDB: 35 00 00 00 00 00 00 00 00 00
[cdrecord] status: 0x0 (GOOD STATUS)
[cdrecord] cmd finished after 0.000s timeout 1000s
[cdrecord] /usr/bin/cdrecord: Cannot fixate disk.
[cdrecord] Trouble flushing the cache
[cdrecord] Fixating time: 0.000s
[cdrecord] /usr/bin/cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd: retryable error
[cdrecord] CDB: 1E 00 00 00 00 00
[cdrecord] status: 0x0 (GOOD STATUS)
[cdrecord] cmd finished after 0.000s timeout 200s
[cdrecord] /usr/bin/cdrecord: fifo had 174 puts and 47 gets.
[cdrecord] /usr/bin/cdrecord: fifo was 0 times empty and 8 times full, min fill was 92%.I tried it both with cdrkit and cdrtools and also tried it with the dvd burner in my computer as well as this one (an external). Anyone able to point me in the right direction on this one?
edit: if it helps diagnose the problem, I just tried testing with a dvd-rw and that burns perfectly, but the dvd-r starts to burn then errors out as above
Last edited by Bregol (2009-06-25 19:04:35)
Nai haryuvalyë melwa rë
Offline
Pages: 1