Arch Linux

jpg52

Member

Registered: 2009-07-08

Posts: 1

Ricoh Card Reader not working

Hi,

I have a Dell XPS M1330 running Arch x64. The card reader isn't working, I don't think it's even being detected. It used to work under Windows. The wiki says it should be detected by the kernel (http://wiki.archlinux.org/index.php/Del … ard_Reader). I'm running kernel version 2.6.30, but I get nothing.

Thanks in advance for your help. Do you need any other information from me?

lifeafter2am

Member

From: 127.0.0.1

Registered: 2009-06-10

Posts: 1,332

Re: Ricoh Card Reader not working

Is sdhci loaded?  Do you get any dmesg output when a card is plugged in?  What does lspci -k show?

---

#binarii @ irc.binarii.net
Matrix Server: https://matrix.binarii.net
-------------
Allan -> ArchBang is not supported because it is stupid.

mini

Member

Registered: 2006-12-18

Posts: 132

Re: Ricoh Card Reader not working

I have tha same problem with my Ricoh card reader in my hp 6910p.
What can be solution in this case?

forivall

Member

Registered: 2011-09-22

Posts: 4

Re: Ricoh Card Reader not working

I'm having the same problem, and since the solution is hard to find, I'll post my dmesg and lspci -k output  here:

dmesg:
[16316.425274] mmc0: Timeout waiting for hardware interrupt.
[16316.425282] sdhci: =========== REGISTER DUMP (mmc0)===========
[16316.425290] sdhci: Sys addr: 0x00000000 | Version:  0x00000400
[16316.425298] sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
[16316.425306] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[16316.425312] sdhci: Present:  0x01f20000 | Host ctl: 0x00000001
[16316.425318] sdhci: Power:    0x0000000e | Blk gap:  0x00000000
[16316.425324] sdhci: Wake-up:  0x00000000 | Clock:    0x00008007
[16316.425330] sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
[16316.425336] sdhci: Int enab: 0x00ff00c3 | Sig enab: 0x00ff00c3
[16316.425342] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000001
[16316.425348] sdhci: Caps:     0x00c02120 | Caps_1:   0x00000000
[16316.425354] sdhci: Cmd:      0x0000371a | Max curr: 0x00000040
[16316.425358] sdhci: Host ctl2: 0x00000000
[16316.425361] sdhci: ===========================================

lspci -k:
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    Subsystem: Dell Device 01f1
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci-pci
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    Subsystem: Dell Device 01f1
    Kernel driver in use: r592
    Kernel modules: r592
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    Subsystem: Dell Device 01f1

Note that this is only the relevant output.

fsckd

Forum Fellow

Registered: 2009-06-15

Posts: 4,173

Re: Ricoh Card Reader not working

Hi forivall, welcome to the forums. Necro-bumping is discouraged because of, well, you can read the reasons yourself in the forum rules: https://wiki.archlinux.org/index.php/Fo … Bumping.27
Closing.

---

aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies