You are not logged in.
Does the CD boot in another computer?
Can you run memtest on the computer you are having trouble with.
Offline
Hello) I have a problem)
After pressing enter in the menu, the following picture turns out:
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
same problem with cdrom, usbboot no problem, i686.
Offline
Does the CD boot in another computer?
Can you run memtest on the computer you are having trouble with.
I do not know, I start on my computer
Yes, i can run memtest from bootscreen, but it started after a conclusion of several lines:
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
Last edited by KFe (2009-08-08 11:32:51)
Offline
KFe wrote:Hello) I have a problem)
After pressing enter in the menu, the following picture turns out:
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163same problem with cdrom, usbboot no problem, i686.
why cdrom? it cant understand hybrid iso image correctly?
Offline
Hrm seems we have an issue with bios and hybird iso on cdroms here.
Hybrid isos can be booted on usbstick or cdrom.
EDIT:
I use k3b for image burning, here it works fine.
Also kvm boots the image fine in cdrom mode.
Must be an issue with your hardware
Last edited by tpowa (2009-08-09 09:14:52)
Offline
Please, check this video... http://narod.org.ru/kfe/arch.avi
this is not hardware problem, i was mastaken...after 40 seconds:
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
loading has proceeded normally
Last edited by KFe (2009-08-09 20:02:37)
Offline
Please, check this video... http://narod.org.ru/kfe/arch.avi
this is not hardware problem, i was mastaken...after 40 seconds:
.ERROR: idle with IF=0
9B3F 9469 A30B 2300 8A79 0000 0000 5163 376F 7163 376F 8163 376F 9163
loading has proceeded normally
same here +1
Offline
hrm i think this could be a syslinux bug, i think i created the images with 3.81
In changlog of 3.82 something with idle and large files is mentioned.
But seems only some system are affected, mine all boot fine.
Offline
Are you able to install with this error message afterwards or is the video output permanently spammed with this message?
Offline
Hi,
here's the same problem. During boot up, the message spams the screen, but when the installation is reached, all seams fine. I was able to install a full working system with it.
At first, I was shocked also, but it everything works if you wait for the bootup to reach the installation.
Thanks again for this archboot CD.
(It still is the only way I can install Archlinux, the official ISOs don't work here ... )
Offline
the message spams the screen
i have this problem too
Are you able to install with this error message afterwards or is the video output permanently spammed with this message?
Yes, after 40 sec of spam i can install the system
Offline
Ok, then it's just a cosmetical issue at the moment i hope this is gone with next release, when syslinux 3.82 is used.
Offline
Thanks for your good work, Tobias
Offline
thanks, and dont forget dmraid next ^^
Offline
Once are you sure that raid0 devices can be used in dmraid mode with grub?
I doubt this is possible, because grub doesn't know on which hd it will be located.
Offline
Once are you sure that raid0 devices can be used in dmraid mode with grub?
I doubt this is possible, because grub doesn't know on which hd it will be located.
no sure, but all installation went OK even grub on /dev/mapper/hpt37_xxxxxxxx, the problem is BIOS raid broken when reboot.
btw, /dev/mapper/hpt37xxx as MRB, hpt37xxp1 as /, hpt37xxp2 as /swap
Last edited by once (2009-08-11 08:12:31)
Offline
could you try an other raid mode, raid1 should work fine.
with broken bios you mean the bios setup doesn't find the arrays anymore?
Offline
could you try an other raid mode, raid1 should work fine.
with broken bios you mean the bios setup doesn't find the arrays anymore?
raid1 should work fine, but i need raid0 for old machine.
yes, bios wont fine array, needed to setup again.
Offline
Be prepared for a next archboot release, if you want download location of beta image file please PM or mail me.
greetings
tpowa
Offline
Ok guys, minitcpio was finished faster as i thought images are syncing to mirrors, please continue discussion here:
http://bbs.archlinux.org/viewtopic.php?id=90886
Offline