kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

Amnon82 · 2009-08-07 21:06:06

I own a Compaq Mini. Since kernel26 update to 2.6.30.4-1 my ethernet card won't work anymore. I used sky2 modul. My wlan card uses broadcom-wl driver from AUR so I disabled !b43 !b44 !ssb in modules. Wlan-Card is now eth0 and there is any other nethwork card. What can I do instead of wait and drink a cup of tea ?!?

Last edited by Amnon82 (2009-08-08 09:09:42)

Amnon82 · 2009-08-07 21:17:27

During reading this post https://bugs.launchpad.net/linux/+bug/384403 it might be fixed in 2.6.31 again ... I've to cook some more tea then ...

Amnon82 · 2009-08-07 22:59:02

I downgraded back to 2.6.30.1 and it works again ... Weird!

 
[phil@phils-netbook ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)                                                                                            
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)                                                                                
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)                 
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)                 
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)         
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)         
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)         
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)         
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
[phil@phils-netbook ~]$ dsmesg | grep sky2
bash: dsmesg: Kommando nicht gefunden.
[phil@phils-netbook ~]$ dmesg | grep sky2
sky2 driver version 1.22
sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:02:00.0: irq 26 for MSI/MSI-X
sky2 eth0: addr 00:24:81:38:00:01
sky2 eth0: enabling interface
sky2 eth0: disabling interface
sky2 eth0: enabling interface
[phil@phils-netbook ~]$ dmesg | grep wl
wl: module license 'Mixed/Proprietary' taints kernel.
wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
wl 0000:01:00.0: setting latency timer to 64
eth1 (wl): not using net_device_ops yet
[phil@phils-netbook ~]$ pacman -Q kernel26
kernel26 2.6.30.1-1
[phil@phils-netbook ~]$

Last edited by Amnon82 (2009-08-07 23:30:36)

Amnon82 · 2009-08-07 23:55:35

Somehow it works again. After the downgrade I did a systemupgrade and now it works:

[phil@phils-netbook ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller
[phil@phils-netbook ~]$ pacman -Q kernel26
kernel26 2.6.30.4-1

Amnon82 · 2009-08-08 09:13:46

This is crazy. During using my netbook on battery it seems my wired-network-card dont get recognized. It is even not listed in lspci at all:

[phil@phils-netbook ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
[phil@phils-netbook ~]$ pacman -Q kernel26
kernel26 2.6.30.4-1

So I've to dig deeper. Lets see what happens with kernel 2.6.30.1 again on battery-mode ...
Also I've to check if there is any script active to turn off my network-card on battery-mode.

Arch Linux

#1 2009-08-07 21:06:06

kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

#2 2009-08-07 21:17:27

Re: kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

#3 2009-08-07 22:59:02

Re: kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

#4 2009-08-07 23:55:35

Re: kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

#5 2009-08-08 09:13:46

Re: kernel 2.6.30.4 and sky2 problem (Marvell Yukon 88E8040 PCI-E)

Board footer