You are not logged in.
Pages: 1
I've installed arch with the 0.7beta2 ISO and installed the standard arch kernel26. After some time I have to build my own kernel because I needed a patch to make acpi functioning. After compiling and copying the image to the /boot, canged grub and so on everything the same way as described in the wiki: http://wiki.archlinux.org/index.php/Ker … ompilation
After rebooting the new kernel and could handle some issues myself I think now that something went terribly wrong because dmesg don't write out normal messages but see yourself:
.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 380878004 0x000003b4 0x00000000 0x0001a14c 0x0000eac8 0x00000000
ipw2200: ERROR_DMA_STATUS 380878008 0x000279a0 0x00027830 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 380878011 0x00028400 0x000285f0 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 380878015 0x00028000 0x000281a0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 380878019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 33230004 0x000003b4 0x00000000 0x0001a788 0x000002fc 0x00000000
ipw2200: ERROR_DMA_STATUS 33230008 0x000274b0 0x000277c0 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 33230011 0x00028400 0x00028670 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 33230015 0x00028000 0x00028110 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 33230019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 6414004 0x000003b4 0x00000000 0x00000238 0x0000ec48 0x00000000
ipw2200: ERROR_DMA_STATUS 6414008 0x000274b0 0x00027870 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 6414011 0x00028400 0x00028510 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 6414015 0x00028000 0x000281d0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 6414019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 69806004 0x000003b4 0x00000000 0x0001a054 0x00000248 0x00000000
ipw2200: ERROR_DMA_STATUS 69806008 0x00027170 0x00027eb0 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 69806011 0x00028400 0x000284d0 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 69806015 0x00028000 0x000281f0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 69806019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
eth1: duplicate address detected!
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
NETDEV WATCHDOG: eth0: transmit timed out
b44: eth0: transmit timed out, resetting
b44: eth0: Link is down.
eth0: no IPv6 routers present
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 129070005 0x000003b4 0x00000000 0x0000129c 0x0000eacc 0x00000000
ipw2200: ERROR_DMA_STATUS 129070009 0x000274b0 0x000276d0 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 129070012 0x00028400 0x000284a0 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 129070016 0x00028000 0x00028300 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 129070020 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 275502004 0x000003b4 0x00000000 0x00019de8 0x0000ee90 0x00000000
ipw2200: ERROR_DMA_STATUS 275502008 0x000274b0 0x00027b70 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 275502011 0x00028400 0x00028460 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 275502015 0x00028000 0x00028080 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 275502019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 231406004 0x000003b4 0x00000000 0x00019f04 0x0000eac8 0x00000000
ipw2200: ERROR_DMA_STATUS 231406008 0x000274b0 0x00027d40 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 231406011 0x00028400 0x000287d0 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 231406015 0x00028000 0x000283b0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 231406019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 5358004 0x000003b4 0x00000000 0x000002e8 0x00000240 0x00000000
ipw2200: ERROR_DMA_STATUS 5358008 0x000274b0 0x00027140 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 5358011 0x00028400 0x00028520 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 5358015 0x00028000 0x00028200 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 5358019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 6510005 0x000003b4 0x00000000 0x00019eec 0x00013d6c 0x00000000
ipw2200: ERROR_DMA_STATUS 6510009 0x000274b0 0x00027c60 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 6510012 0x00028400 0x00028510 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 6510016 0x00028000 0x000281c0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 6510020 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 9902004 0x000003b4 0x00000000 0x0001a054 0x00013da0 0x00000000
ipw2200: ERROR_DMA_STATUS 9902008 0x000274b0 0x000275d0 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 9902011 0x00028400 0x00028520 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 9902015 0x00028000 0x00028140 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 9902019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 11310004 0x000003b4 0x00000000 0x00019f04 0x000154a0 0x00000000
ipw2200: ERROR_DMA_STATUS 11310008 0x000274b0 0x00027c50 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 11310011 0x00028400 0x00028530 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 11310015 0x00028000 0x000280b0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 11310019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 19502004 0x000003b4 0x00000000 0x000012c4 0x00013d6c 0x00000000
ipw2200: ERROR_DMA_STATUS 19502008 0x000274b0 0x00027370 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 19502011 0x00028400 0x00028540 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 19502015 0x00028000 0x000280c0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 19502019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 62222004 0x000003b4 0x00000000 0x000002e8 0x0000ec00 0x00000000
ipw2200: ERROR_DMA_STATUS 62222008 0x000274b0 0x00027750 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 62222011 0x00028400 0x000285c0 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 62222015 0x00028000 0x00028290 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 62222019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003
ipw2200: Fatal error
ipw2200: Start IPW Error Log Dump:
ipw2200: ERROR_NMI_INTERRUPT 34446004 0x000003b4 0x00000000 0x00000304 0x0000023c 0x00000000
ipw2200: ERROR_DMA_STATUS 34446008 0x000274b0 0x00027e60 0x01540002 0x00000000 0x00000000
ipw2200: ERROR_DMA_STATUS 34446011 0x00028400 0x00028570 0x00540001 0x00000000 0x00000001
ipw2200: ERROR_DMA_STATUS 34446015 0x00028000 0x000280a0 0x00540000 0x9c6a4200 0x00000002
ipw2200: ERROR_DMA_STATUS 34446019 0x00400000 0x00408000 0x30408200 0x00000086 0x00000003Yes as I said before not normal in my opinion. Also very funny is that uname -r get out 2.6.9-ARCH but shouldn't it be named to 2.6.9 only because it's not the standard kernel? I must mention that I only downloaded the sources from kernel.org and have now the directories linux-2.6.9 and linux-2.6.9-ARCH in my /usr/src dir but nothing else. I haven't moved something out of the linux-2.6.9-ARCH dir only added the source dir from kernel.org.
I also would like to know how I get the "can't load module hw_random" message on hotplugd start away, it's distempering. I've got this message also when I used the standard kernel.
Offline
If you get a lot of errormessages, dmesg gets filled up with them, and the normal bootmessages are replaced by them. It seems you've got a lot of errors about your NIC.
That's probably why dmesg shows "strange" errors.
I'd recompile the kernel and double check all the options to make sure you've got support for your NIC.
If you want to change the name of your kernel, simply edit "Makefile" in /usr/src/linux: the name is located at the beginning of the file.
It's also wise to make a symlink "linux" in /usr/src pointing to the kernel-dir of the current kernel:
ln -s /usr/src/linux-2.6.9 /usr/src/linuxOffline
Pages: 1