You are not logged in.

#851 2010-02-16 23:47:58

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: Discussion: the ati/radeon open source drivers & radeon repository

Perry3D wrote:

I think you can manually set the resolution with an option for the radeon module. Something like video=.... Maybe you can set the vertical refresh rate also.

OK, i will search for that and leave some note if found something smile.

Perry3D wrote:

I have no idea if you can disable vsync. Maybe it is application-based.

Quake III Arena is game on which im performing tests and like to rarely play it - vsync is disabled in game but still driver is forcing to use it. Catalyst behaves the same when you will force it to use vsync on every opengl application.

Perry3D wrote:

About flash videos: i think it is the fault of your window manager. If you use compiz try diabling "unridirect_fullscreen_videos" in ccsm/general.

Well... actually if i'll disable kwin - flash is tearing always smile, and unfortunetly kwin hasn't got any kind of "unridirect_fullscreen_videos" option sad
Edit: AFAIK UnredirectFullscreen is enabled on default kwin configuration...
Wow! That's actually working! Thanks Perry smile
I have added this line:
UnredirectFullscreen=off
to [Compositing] section of kwinrc file placed here: ~/.kde4/share/config/
and flash is looking good smile

Last edited by Vi0L0 (2010-02-17 00:05:20)

Offline

#852 2010-02-17 00:10:37

venky80
Member
Registered: 2007-05-13
Posts: 996

Re: Discussion: the ati/radeon open source drivers & radeon repository

does anyone know who maintains the nightly repos?


DELL XPS 1640 with ATI Mobility Radeon  HD 3670. Arch Linux KDE Minimal Install

Offline

#853 2010-02-17 03:26:57

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: Discussion: the ati/radeon open source drivers & radeon repository

Perry3D wrote:

I think you can manually set the resolution with an option for the radeon module. Something like video=.... Maybe you can set the vertical refresh rate also.

I have successfully forced KMS to use 75Hz as refresh rate by putting:
video=1280x1024@75
to kernel boot options. But now i cannot force xorg to start with such rate... I have tried with no xorg.conf file and with
         VertRefresh  75.0 - 75.0
option in xorg.conf file...
It's always starting Xs with 60Hz refresh rate.
(and yes -  i can change refresh rate in systemsettings [kde's settings manager] to 75Hz without problems)
Heh... I guess it's some kind of monitor issue(?). Earlier with catalyst i have succesfully used:
        Option      "TargetRefresh" "75"
to force refresh. But here this option just doesnt exist. Any clue?

Last edited by Vi0L0 (2010-02-17 03:40:39)

Offline

#854 2010-02-17 08:20:30

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

@venky I have no idea hmm

@Vi0L0: but i experience other problems if this option is disabled. For example xbmc is really slow with compiz in the background. If it is enabled it works as it should.

/edit: The performance regression with vline support (prevent tearing) is discussed here: http://bugs.freedesktop.org/show_bug.cgi?id=26599

Last edited by Perry3D (2010-02-17 09:48:21)

Offline

#855 2010-02-17 12:21:29

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,320
Website

Re: Discussion: the ati/radeon open source drivers & radeon repository

Vi0L0 wrote:

I have successfully forced KMS to use 75Hz as refresh rate by putting:
video=1280x1024@75
to kernel boot options. But now i cannot force xorg to start with such rate... I have tried with no xorg.conf file and with
         VertRefresh  75.0 - 75.0
option in xorg.conf file...
It's always starting Xs with 60Hz refresh rate.
(and yes -  i can change refresh rate in systemsettings [kde's settings manager] to 75Hz without problems)
Heh... I guess it's some kind of monitor issue(?). Earlier with catalyst i have succesfully used:
        Option      "TargetRefresh" "75"
to force refresh. But here this option just doesnt exist. Any clue?

Solved with:
#       HorizSync    30.0 - 80.0
         VertRefresh  71.0 - 77.0
in xorg.conf

Perry3D wrote:

@Vi0L0: but i experience other problems if this option is disabled. For example xbmc is really slow with compiz in the background. If it is enabled it works as it should.

Yeaah, i have noticed that if this option is disabled - quake3a now exceeds vline(v-sync) and framerate is now touching 125fps (my handy limit) but in very strange more laggy way smile... - if kwin is disabled vline is back.
SMplayer for example behaves much better if this option is disabled.

Perry3D wrote:

/edit: The performance regression with vline support (prevent tearing) is discussed here: http://bugs.freedesktop.org/show_bug.cgi?id=26599

According to comments we cannot disable vline, at least not now.

Offline

#856 2010-02-17 14:30:45

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: Discussion: the ati/radeon open source drivers & radeon repository

I don't know how are you guys doing it. Anytime I enable kms, the whole screen is showing only for split seconds with a second or two delay.
This is what I've done:

1. kernel26-firmware-git
2. kernel26-git
3. radeon_ucode
4. libdrm-git with radeon experimental api
5. dri2proto-git, glproto-git
6. mesa-full without egl and nouveau
7. xf86-video-ati-git (it fetched xf86driproto)

I have a hd4850. I had the same problem a while back, but nobody seemed to have these problems and I switched back to stock kernel...

Edit: BTW I think there is an error in the wiki about the kms late start... I don't think with late start one should put radeon to modules in mkinitcpio.conf

Edit2:
Hm... I just tried with dvi->vga->display adapter and everything works fine, until now it was dvi->hdmi->display. Maybe a hdmi bug???

Last edited by lman (2010-02-22 13:10:38)

Offline

#857 2010-02-18 11:06:50

korpenkraxar
Member
Registered: 2006-04-02
Posts: 123

Re: Discussion: the ati/radeon open source drivers & radeon repository

A question to you guys with mysteriously crashing systems: are you all running a recent build of KDE/KWin?

Offline

#858 2010-02-18 11:46:24

svejaka
Member
From: Bulgaria
Registered: 2009-01-21
Posts: 33

Re: Discussion: the ati/radeon open source drivers & radeon repository

Hello.

I have reinstalled packages in the order mentioned above but still when i type glxinfo |grep -i opengl

No protocol specified
Error: unable to open display :0

Here is the output of hwd -s

HARDWARE DETECT ver 5.5.2 (simple mode)
  Kernel     : 2.6.32-ARCH             
  CPU & Cache: Processor 0: Intel(R) Core(TM)2 Duo CPU     T6600  @ 2.20GHz 2200MHz, 2048 KB Cache
Processor 1: Intel(R) Core(TM)2 Duo CPU     T6600  @ 2.20GHz 2200MHz, 2048 KB Cache

  Sound(a)   : 82801I ICH9 Family HD Audio Controller module: snd-hda-intel
  Sound(a)   : RV710/730 module: snd-hda-intel
  Video      : M92 [Mobility Radeon HD 4500 Series] server: Xorg (vesa)
  Driver     : xf86-video-vesa   module: -
  Monitor    : Generic Monitor  H: 28.0-96.0kHz V: 50.0-75.0Hz

I looks like i`m not using ati driver.

Last edited by svejaka (2010-02-18 11:47:13)

Offline

#859 2010-02-18 13:07:59

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: Discussion: the ati/radeon open source drivers & radeon repository

@svejaka:
are you running kms?
Xorg.0.log and dmesg could be helpful. Also the list of the important packages with versions...
Are you using /etc/X11/xorg.conf? Try renaming/removing it

Last edited by lman (2010-02-18 13:11:07)

Offline

#860 2010-02-18 14:28:22

mixi
Member
From: Germany
Registered: 2009-11-30
Posts: 13

Re: Discussion: the ati/radeon open source drivers & radeon repository

venky80 wrote:

does anyone know who maintains the nightly repos?

If you want to contact them: http://tracker.kromonos.net/projects/show/nightlyarch

Edit:

Since the site is german here some more information:
x86 packages: kromonos (email: kromonos@user-helfen-usern.de)
x86_64 packages: flocke (email: flocke@user-helfen-usern.de)

Last edited by mixi (2010-02-18 14:34:08)

Offline

#861 2010-02-18 14:57:56

svejaka
Member
From: Bulgaria
Registered: 2009-01-21
Posts: 33

Re: Discussion: the ati/radeon open source drivers & radeon repository

I`m not using xorg.conf and kms is disabled.

X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64 
Current Operating System: Linux archer 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 15:12:10 CET 2010 x86_64
Kernel command line: root=/dev/disk/by-uuid/62a08005-df0f-4bb0-ab65-26afba69a01d resume=/dev/sda6 ro acpi_enforce_resources=lax radeon.modeset=0
Build Date: 17 February 2010  07:57:38PM
 
Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 13:38:04 2010
(II) Loader magic: 0x7c0fa0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:9553:1025:0205 ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] rev 0, Mem @ 0xd0000000/268435456, 0xf4000000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default ati Device 0"
        Driver    "ati"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default ati Screen 0"
        Device    "Builtin Default ati Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default ati Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000f4000000
(II) RADEON(0): MMIO registers at 0x00000000f4000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon 4500 Series" (ChipID = 0x9553)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
    SubsystemVendorID: 0x1025 SubsystemID: 0x0205
    IOBaseAddress: 0x2000
    Filename: BR33359D.bin
    BIOS Bootup Message: 
Acer_JV50_MV_M92M2_XT_DDR3 M92 DDR3 64bit 680e/800m                         

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffec
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffec
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 680000
(II) RADEON(0): Default Memory Clock: 800000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 16000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 6000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 600, max_in_pll: 1600, xclk: 40000, sclk: 680.000000, mclk: 800.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1366, YRes: 768, DotClock: 69500
HBlank: 71, HOverPlus: 48, HSyncWidth: 32
VBlank: 38, VOverPlus: 3, VSyncWidth: 4
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_UNIPHY2
  DDC reg: 0x7f68
(II) RADEON(0): Port1:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_KLDSCP_DAC1
  DDC reg: 0x7e40
(II) RADEON(0): Port2:
  XRANDR name: HDMI-0
  Connector: HDMI-A
  DFP1: INTERNAL_UNIPHY
  DDC reg: 0x7e50
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO  Model: 20ec  Serial#: 0
(II) RADEON(0): Year: 2008  Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
(II) RADEON(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
(II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  AUO
(II) RADEON(0):  B156XW02 V0
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0006afec2000000000
(II) RADEON(0):     01120103802213780a57559c5a549d26
(II) RADEON(0):     1a505400000001010101010101010101
(II) RADEON(0):     010101010101261b5647500026303020
(II) RADEON(0):     340058c1100000180000000f00000000
(II) RADEON(0):     00000000000000000020000000fe0041
(II) RADEON(0):     554f0a202020202020202020000000fe
(II) RADEON(0):     004231353658573032205630200a002e
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO  Model: 20ec  Serial#: 0
(II) RADEON(0): Year: 2008  Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
(II) RADEON(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
(II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  AUO
(II) RADEON(0):  B156XW02 V0
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0006afec2000000000
(II) RADEON(0):     01120103802213780a57559c5a549d26
(II) RADEON(0):     1a505400000001010101010101010101
(II) RADEON(0):     010101010101261b5647500026303020
(II) RADEON(0):     340058c1100000180000000f00000000
(II) RADEON(0):     00000000000000000020000000fe0041
(II) RADEON(0):     554f0a202020202020202020000000fe
(II) RADEON(0):     004231353658573032205630200a002e
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1366x768
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1366x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (340, 190) mm
(**) RADEON(0): DPI set to (102, 182)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00ef00d0
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x20000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00801000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00805000
(II) RADEON(0): Will use 8196 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 8196 kb for back buffer at offset 0x00809000
(II) RADEON(0): Will use 8256 kb for depth buffer at offset 0x0100a000
(II) RADEON(0): Will use 117760 kb for textures at offset 0x0181a000
(II) RADEON(0): Will use 119640 kb for X Server offscreen at offset 0x08b1a000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x1033e900
(II) RADEON(0): [pci] ring handle = 0x2b800000
(II) RADEON(0): [pci] Ring mapped at 0x7f9371f91000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7f93720b5000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b801000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7f935d9c7000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x2b802000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7f935bd47000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x001f0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x00ef00d0 is: 0x00ef00d0
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 122511360 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output UNIPHY2 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): UNIPHY0 transmitter: Coherent Mode enabled
Output UNIPHY0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1366x768 - 1437 806 0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00ef00d0 0x00ef00d0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
freq: 69500000
best_freq: 69485294
best_feedback_div: 175
best_ref_div: 4
best_post_div: 17
(II) RADEON(0): crtc(0) Clock: mode 69500, PLL 69480
(II) RADEON(0): crtc(0) PLL  : refdiv 4, fbdiv 0xAF(175), pdiv 17
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output UNIPHY2 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): UNIPHY0 transmitter: Coherent Mode enabled
Output UNIPHY0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.3.901, module version = 1.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device CNF7017
(**) CNF7017: always reports core events
(**) CNF7017: Device: "/dev/input/event9"
(II) CNF7017: Found keys
(II) CNF7017: Configuring as keyboard
(II) XINPUT: Adding extended input device "CNF7017" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device PIXART USB OPTICAL MOUSE
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event8"
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
(II) PIXART USB OPTICAL MOUSE: Found relative axes
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
(**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
(**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
(II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO  Model: 20ec  Serial#: 0
(II) RADEON(0): Year: 2008  Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
(II) RADEON(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
(II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  AUO
(II) RADEON(0):  B156XW02 V0
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0006afec2000000000
(II) RADEON(0):     01120103802213780a57559c5a549d26
(II) RADEON(0):     1a505400000001010101010101010101
(II) RADEON(0):     010101010101261b5647500026303020
(II) RADEON(0):     340058c1100000180000000f00000000
(II) RADEON(0):     00000000000000000020000000fe0041
(II) RADEON(0):     554f0a202020202020202020000000fe
(II) RADEON(0):     004231353658573032205630200a002e
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1366x768
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO  Model: 20ec  Serial#: 0
(II) RADEON(0): Year: 2008  Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
(II) RADEON(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
(II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  AUO
(II) RADEON(0):  B156XW02 V0
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0006afec2000000000
(II) RADEON(0):     01120103802213780a57559c5a549d26
(II) RADEON(0):     1a505400000001010101010101010101
(II) RADEON(0):     010101010101261b5647500026303020
(II) RADEON(0):     340058c1100000180000000f00000000
(II) RADEON(0):     00000000000000000020000000fe0041
(II) RADEON(0):     554f0a202020202020202020000000fe
(II) RADEON(0):     004231353658573032205630200a002e
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1366x768
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO  Model: 20ec  Serial#: 0
(II) RADEON(0): Year: 2008  Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.610 redY: 0.353   greenX: 0.329 greenY: 0.616
(II) RADEON(0): blueX: 0.149 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.5 MHz   Image Size:  344 x 193 mm
(II) RADEON(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1437 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0):  AUO
(II) RADEON(0):  B156XW02 V0
(II) RADEON(0): EDID (in hex):
(II) RADEON(0):     00ffffffffffff0006afec2000000000
(II) RADEON(0):     01120103802213780a57559c5a549d26
(II) RADEON(0):     1a505400000001010101010101010101
(II) RADEON(0):     010101010101261b5647500026303020
(II) RADEON(0):     340058c1100000180000000f00000000
(II) RADEON(0):     00000000000000000020000000fe0041
(II) RADEON(0):     554f0a202020202020202020000000fe
(II) RADEON(0):     004231353658573032205630200a002e
(II) RADEON(0): EDID vendor "AUO", prod id 8428
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1366x768
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output UNIPHY2 transmitter setup success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output UNIPHY2 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output UNIPHY2 transmitter setup success
libdrm 2.4.18-1
dri2proto 2.1-1
mesa 7.7-1
xf86-video-ati 6.12.4-3

Offline

#862 2010-02-18 16:50:13

lman
Member
From: CZ
Registered: 2007-12-18
Posts: 252

Re: Discussion: the ati/radeon open source drivers & radeon repository

Do you have your user in the video group?

Offline

#863 2010-02-19 04:43:47

venky80
Member
Registered: 2007-05-13
Posts: 996

Re: Discussion: the ati/radeon open source drivers & radeon repository

mixi wrote:
venky80 wrote:

does anyone know who maintains the nightly repos?

If you want to contact them: http://tracker.kromonos.net/projects/show/nightlyarch

Edit:

Since the site is german here some more information:
x86 packages: kromonos (email: kromonos@user-helfen-usern.de)
x86_64 packages: flocke (email: flocke@user-helfen-usern.de)

Thanks


DELL XPS 1640 with ATI Mobility Radeon  HD 3670. Arch Linux KDE Minimal Install

Offline

#864 2010-02-19 10:25:35

svejaka
Member
From: Bulgaria
Registered: 2009-01-21
Posts: 33

Re: Discussion: the ati/radeon open source drivers & radeon repository

Yes my user is in the video group.

I`ve tried using xorg.conf generated with hwd -xa....forced it to use radeon driver.When i rebooted the display was dimmed  and somehow green.Everything look.Now i`m not using xorg.conf

Last edited by svejaka (2010-02-19 11:21:53)

Offline

#865 2010-02-19 15:15:33

insanemal
Member
From: Brisbane/Australia
Registered: 2009-05-05
Posts: 140

Re: Discussion: the ati/radeon open source drivers & radeon repository

Im trying to compile Mesa-full under a 32bit chroot. But it keeps picking up my x86_64 kernel and trying to compile using x86_64 asm. Anybody know how to force it to behave?


NVM I founded it.

Last edited by insanemal (2010-02-19 15:47:58)

Offline

#866 2010-02-19 16:55:09

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

insanemal wrote:

Im trying to compile Mesa-full under a 32bit chroot. But it keeps picking up my x86_64 kernel and trying to compile using x86_64 asm. Anybody know how to force it to behave?


NVM I founded it.

Are you trying to compile lib32-mesa? If so, a little howto would be nice.

Offline

#867 2010-02-20 16:47:35

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

Someone in the ATI-Thread offers a repository on dropbox. That inspired me. So i did the same for some packages:
I need some testers:

[ati]
Server = http://dl.dropbox.com/u/4832298/x86_64

Content is (you can not browse on dropbox):

glproto-git
dri2proto-git
libdrm-git
mesa-full
xf86-video-ati-git
kernel26-git
kernel26-firmware-git
radeon_ucode

/edit: mesa has only the r600/r700 driver (i forgot to change this).

Last edited by Perry3D (2010-02-20 17:06:02)

Offline

#868 2010-02-20 18:28:10

riri
Member
Registered: 2007-05-21
Posts: 9

Re: Discussion: the ati/radeon open source drivers & radeon repository

Hi Perry3D

Does it mean that if we use this repository and use the contained packages, we'll have the latest packages needed to achieve 3D support (testing) with ATI r600/r700, without the hassle of building the whole ?

If it's so simple, that's a real gift you make smile

Offline

#869 2010-02-20 18:55:52

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

I hope so. This is my first repository i set up. And only for x86_64 (at the moment).

Offline

#870 2010-02-20 19:22:01

venky80
Member
Registered: 2007-05-13
Posts: 996

Re: Discussion: the ati/radeon open source drivers & radeon repository

Perry3D wrote:

I hope so. This is my first repository i set up. And only for x86_64 (at the moment).

I have been wishing for this for ages, thank you.
I contacted the nightly repo guy and he has included the kernel-git in the nightly repo too.

Do you know how often your repo will be refreshed?


DELL XPS 1640 with ATI Mobility Radeon  HD 3670. Arch Linux KDE Minimal Install

Offline

#871 2010-02-20 19:35:03

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

Hmm. I can not see the kernel26-git package in the nightly repo. And i muss mesa-full, too. If he change this i will stop offering this repo.

I think i will update it twice a week.

Offline

#872 2010-02-20 19:37:30

MuPuF
Member
From: France
Registered: 2008-04-01
Posts: 15
Website

Re: Discussion: the ati/radeon open source drivers & radeon repository

Hi all, I also have packages for the whole graphic stack on mupuf.org.

There are 10 of us using fulltime and didn't run into any issue since quite a while so, if you wanna try it, you can.

http://mupuf.org/packages/mupuf/ : 32 bits version (this one is the least updated and the kernel is based on the nouveau tree)
http://mupuf.org/packages/mupuf64/ : 64 bits version (the more updated)

If you have any suggestions about how to improve the packages, I'm open wink

Also: This website is hosted on my dedicated server. It has a 100Mbits/s bandwidth and no quotas.

Edit: I have scripts to recompile the whole stack. I can run it every day in a crontab if you want to. But, I usually upload a new version when I find it to be worth.

Edit2: I run these repo since septembre

Last edited by MuPuF (2010-02-20 19:42:14)

Offline

#873 2010-02-20 19:46:08

venky80
Member
Registered: 2007-05-13
Posts: 996

Re: Discussion: the ati/radeon open source drivers & radeon repository

Perry3D wrote:

Hmm. I can not see the kernel26-git package in the nightly repo. And i muss mesa-full, too. If he change this i will stop offering this repo.

I think i will update it twice a week.

I am getting libpthread-stubs not found, could you include that package in your repo too? It is needed for lib-drm git

I can see kernel-26-git in x86_64 repo

Last edited by venky80 (2010-02-20 19:47:35)


DELL XPS 1640 with ATI Mobility Radeon  HD 3670. Arch Linux KDE Minimal Install

Offline

#874 2010-02-20 19:55:57

Perry3D
Member
Registered: 2008-03-20
Posts: 542

Re: Discussion: the ati/radeon open source drivers & radeon repository

venky80 wrote:

I am getting libpthread-stubs not found, could you include that package in your repo too? It is needed for lib-drm git

At the moment i am not at home. But i will do this later. You can also build it from AUR.

venky80 wrote:

I can see kernel-26-git in x86_64 repo

Ah, i found an error: http://nightly.uhuc.de/view.php?file=x8 … 26-git.txt

Offline

#875 2010-02-20 20:15:36

venky80
Member
Registered: 2007-05-13
Posts: 996

Re: Discussion: the ati/radeon open source drivers & radeon repository

perry 3D
I downloaded all the stuff from your repo an libpaystubs from nightly repo
I do not think kms is working for me. I see big texts while booting.
here is my Xorg.0.log http://pastebin.ca/1803975
here is my

[venky@ARCH64XPS ~]$ glxinfo |grep -i opengl
IRQ's not enabled, falling back to busy waits: 2 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: Mesa DRI R600 (RV635 9593) 20090101  TCL
OpenGL version string: 2.0 Mesa 7.8-devel
OpenGL shading language version string: 1.10
OpenGL extensions:

and here is my xorg.conf http://pastebin.ca/1803981

How can I get dri2 and better power management, also to enable irqs i did install radeon_ucode

following is the screenshot of my deskop there is lot of tearing in the edges of cursor and windows http://imagebin.ca/view/KivjId.html

Last edited by venky80 (2010-02-20 20:17:10)


DELL XPS 1640 with ATI Mobility Radeon  HD 3670. Arch Linux KDE Minimal Install

Offline

Board footer

Powered by FluxBB