You are not logged in.

#1 2009-10-10 20:16:01

eviltoaster
Member
Registered: 2009-09-23
Posts: 17
Website

ieee1394 and dv camera

Hi, i have some problems with firewire in archlinux, all i know is that kino does not find my camera and dmesg giving me error... and i have not installed more then kino and dvgrab and all dependencies.

dvgrab

Error: no camera exists

dmesg

ohci1394 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[dc000000-dc0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
ohci1394: fw-host0: Get PHY Reg timeout [0x02e20000/0x00000000/100]
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x00012669] (count: 0)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f96e6baa>] ? ohci_transmit+0x7a/0xe0 [ohci1394]
 [<f825bb35>] ? hpsb_send_packet_and_wait+0x45/0x60 [ieee1394]
 [<f825c972>] ? hpsb_read+0xa2/0x110 [ieee1394]
 [<f8261ec5>] ? nodemgr_host_thread+0x425/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
 [<f8261aa0>] ? nodemgr_host_thread+0x0/0xb90 [ieee1394]
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x00043573] (count: 1)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x00063679] (count: 2)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x0009a172] (count: 3)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x000a137f] (count: 4)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x000e052d] (count: 5)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Stopping reset loop for IRM sanity
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x0010060e] (count: 6)
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ohci1394: fw-host0: AT dma reset ctx=1, aborting transmission
ieee1394: received packet during reset; ignoring
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ohci1394: fw-host0: Error in reception of SelfID packets [0x00000000/0x0010060e] (count: 7)
ohci1394: fw-host0: SelfID received outside of bus reset sequence

modprobe raw1394 ... etc

WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.

Anyone able to help me with this information ? big_smile

Last edited by eviltoaster (2009-10-10 20:18:48)


arrowhead south backbone

Offline

#2 2009-10-11 08:08:50

eviltoaster
Member
Registered: 2009-09-23
Posts: 17
Website

Re: ieee1394 and dv camera

bump...


arrowhead south backbone

Offline

#3 2009-10-11 16:20:18

steve___
Member
Registered: 2008-02-24
Posts: 452

Re: ieee1394 and dv camera

After you do

$ modprobe raw1394

Do you see it in the out of

$ lsmod |grep raw1394

I remember I got an error when I dumped some video from my camera but I do not remember the specific error.  The solution was to specify the format.

$ dvgrab -f hdv FILENAME

Offline

#4 2009-10-11 18:24:16

eviltoaster
Member
Registered: 2009-09-23
Posts: 17
Website

Re: ieee1394 and dv camera

steve___ wrote:

After you do

$ modprobe raw1394

Do you see it in the out of

$ lsmod |grep raw1394

I remember I got an error when I dumped some video from my camera but I do not remember the specific error.  The solution was to specify the format.

$ dvgrab -f hdv FILENAME
[eviltoaster@Arch ~]$ lsmod | grep raw1394
raw1394                25724  0 
ieee1394               85324  3 video1394,raw1394,ohci1394

i have never used dvgrab only kino .. but kino does not show my camera so i installed dvgrab.

[eviltoaster@Arch Desktop]$ dvgrab -f hdv tape1
Error: no camera exists

arrowhead south backbone

Offline

#5 2009-10-12 12:19:55

eviltoaster
Member
Registered: 2009-09-23
Posts: 17
Website

Re: ieee1394 and dv camera

Anyone that can explane for me how you got it to work?


arrowhead south backbone

Offline

#6 2009-10-14 12:27:33

eviltoaster
Member
Registered: 2009-09-23
Posts: 17
Website

Re: ieee1394 and dv camera

bump...


arrowhead south backbone

Offline

#7 2009-10-14 17:20:04

1LordAnubis
Member
Registered: 2008-10-10
Posts: 253
Website

Re: ieee1394 and dv camera

I'm not sure how to get it to work, but the error message is related to your modprobe directory:

WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.

Reference: http://www.archlinux.org/news/450/

It looks like the old firewire stack, so you need to make sure you load the proper modules at boot, (or modprobe them)

Also... try running dvgrab in interactive mode:
dvgrab -i

Also, is your user added to the video group?


Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
-Benjamin Franklin
The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.
-George Bernard Shaw

Offline

Board footer

Powered by FluxBB