[SOLVED]Weird mouse behaviour

dvl · 2009-11-17 04:00:01

Hey there!

I had to reinstall my system, after i trashed my root fs completely, while not paying enough attention on e2fck.
I formatted the partition and installed a fresh arch from an older CD (2008 aug i think). After installation completed, everything ok, i runned a pacman -Syu, upgraded all, and started to install extra packages, Xorg first.

After installing xorg i realised that something is wrong with the way how arch recognizes my mouse. It isnt an xorg problem because i started gpm daemon and it was working very weird in console too.

Acceleration is weird, and after few secs, the pointer gets stuck in the top-left corner and i cant move away from there anymore.

What should the problem be?

- Might be related to this, HAL is takeing like ~15 secs to start (udev events ~1000milisecs)
- Im dont have any modules yet in the modules area, since its a fresh install (only !pcspkr) and in the deamons array i start hal and fam too.
- lsusb is wrinting the mouse name correctly

I tryed a lot of things from the forums, but couldnt solve this problem yet.

Everything else seems to work fine, exept this and the long HAL load

With respect,
dvl

Last edited by dvl (2009-11-21 05:38:29)

Gen2ly · 2009-11-17 12:34:38

From what I can tell Everything looks to be just fine. Have, you tried looking in the Xorg.0.log to see if any errors are beingproduced?

dvl · 2009-11-17 13:44:42

Here is the Xorg.0.log

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux dvl-pc 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/264674b1-b91d-46a7-81f1-2b89b532d628 ro 3 vga=792 
Build Date: 08 November 2009  04:12:47PM
 
Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 17:42:56 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Videocard0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard1
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:5:0:0) 10de:0402:19f1:04bd nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Reloading /usr/lib/xorg/modules/extensions/libglx.so
(II) NVIDIA GLX Module  190.42  Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "CursorShadow" "true"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024_60 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) Nov 17 17:42:56 NVIDIA(0): Enabling RENDER acceleration
(**) Nov 17 17:42:56 NVIDIA(0): Enabling cursor shadow
(II) Nov 17 17:42:56 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Nov 17 17:42:56 NVIDIA(0):     enabled.
(II) Nov 17 17:42:57 NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:5:0:0 (GPU-0)
(--) Nov 17 17:42:57 NVIDIA(0): Memory: 262144 kBytes
(--) Nov 17 17:42:57 NVIDIA(0): VideoBIOS: 60.84.35.00.65
(II) Nov 17 17:42:57 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Nov 17 17:42:57 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 17 17:42:57 NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:5:0:0:
(--) Nov 17 17:42:57 NVIDIA(0):     IBM (CRT-0)
(--) Nov 17 17:42:57 NVIDIA(0): IBM (CRT-0): 400.0 MHz maximum pixel clock
(II) Nov 17 17:42:57 NVIDIA(0): Assigned Display Device: CRT-0
(WW) Nov 17 17:42:57 NVIDIA(0): No valid modes for "1280x1024_60+0+0"; removing.
(II) Nov 17 17:42:57 NVIDIA(0): Validated modes:
(II) Nov 17 17:42:57 NVIDIA(0):     "1024x768+0+0"
(II) Nov 17 17:42:57 NVIDIA(0):     "800x600+0+0"
(II) Nov 17 17:42:57 NVIDIA(0):     "640x480+0+0"
(II) Nov 17 17:42:57 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) Nov 17 17:42:57 NVIDIA(0): DPI set to (92, 92); computed from "UseEdidDpi" X config
(--) Nov 17 17:42:57 NVIDIA(0):     option
(**) Nov 17 17:42:57 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Nov 17 17:42:57 NVIDIA(0): Initialized GPU GART.
(II) Nov 17 17:42:57 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Nov 17 17:42:57 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Nov 17 17:42:57 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Nov 17 17:42:57 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Nov 17 17:42:57 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Nov 17 17:42:57 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Nov 17 17:42:57 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Nov 17 17:42:57 NVIDIA(0):     Config Options in the README.
(II) Nov 17 17:42:57 NVIDIA(0): Setting mode "1024x768+0+0"
(II) Loading extension NV-GLX
(II) Nov 17 17:42:57 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Nov 17 17:42:57 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Mouse1: Device: "/dev/input/mice"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Mouse1"
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event4"
(II) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Found relative axes
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
(II) A4Tech PS/2+USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) A4Tech PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"

The mouse is with evdev now, but it works the same with the default "mouse" driver too

dvl · 2009-11-17 13:46:34

But as i said, i dont think its an xorg problem, because the mouse works that weird in console too (with gpm).

I think maybe its summin wrong with udev/hal

RagingDragon · 2009-11-18 01:02:03

I'm having similar issues, and also have an A4 mouse. I wonder.... I'm using xf86-video-ati driver and an Radeon 4850.

RagingDragon · 2009-11-18 01:45:39

This seems to be a known bug in the xf86-input-evdev driver: http://bugs.archlinux.org/task/16972.

According to the bug report there's a patched evdev available in AUR; however, I don't need input hot-plugging so I disabled it as follows:

# pacman -S xf86-input-keyboard xf86-input-mouse
# Xorg -configure
# mv xorg.conf.new /etc/X11/xorg.conf

Then added following to /etc/X11/xorg.conf

Section "ServerFlags"
Option "AutoAddDevices" "false"
Option "AllowEmpthyInput" "false"
Option "DontZap" "false"
EndSection

dvl · 2009-11-19 03:57:33

I tryed few things now, but without success..

As i said few times before too, i dont think that Xorg is causing the problem, since the mouse works the same using gpm (mouse in console, for mc for example) too.

Anyway, i applied the xevdev patch from AUR too, but didnt changed anything, i downgraded udev and hal (hal works fine now, hangs less than 1 sec instead of 15 sec), tryed with the recent post's xorg.conf options too..
But still couldnt solve anything.

Maybe some kernel modules are missing or corrupted? (im using 2.6.31-ARCH, the latest update)

Last edited by dvl (2009-11-19 05:18:59)

dvl · 2009-11-19 04:00:22

Some new "things" has appered in the Xorg.0.log, relating to the mouse>

record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Mouse1: Device: "/dev/input/mice"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Mouse1"
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.10" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event2"
(II) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Found relative axes
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
(II) A4Tech PS/2+USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) A4Tech PS/2+USB Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"

Is this saying something for some1 of u?

dvl · 2009-11-21 05:37:59

[SOLVED PARTIALLY]

I succeded by solveing the problem with downgradeing some packages. I wrote Solved Partially since i dont consider it as a solution because its not working with some versions of packages.
But the downgrades solved my problem for Xorg, altrough its still working badly on gpm (i dont use it anyway, just did for testing)
So here are the packages for witch i use different versions than from the last update>

xorg-server 1.6.3.901-1
xf86-input-evdev 2.2.5-1

and

hal 0.5.13-2
udev 146-2

Everything else is from latest update. You can find these older versions of packages here:
http://schlunix.org/archlinux/

Greetings!
dvl

dmz · 2009-11-21 05:49:48

I had the same troubles, using nvidias xinerama; I switched to twinview and voilá.

Arch Linux

#1 2009-11-17 04:00:01

[SOLVED]Weird mouse behaviour

#2 2009-11-17 12:34:38

Re: [SOLVED]Weird mouse behaviour

#3 2009-11-17 13:44:42

Re: [SOLVED]Weird mouse behaviour

#4 2009-11-17 13:46:34

Re: [SOLVED]Weird mouse behaviour

#5 2009-11-18 01:02:03

Re: [SOLVED]Weird mouse behaviour

#6 2009-11-18 01:45:39

Re: [SOLVED]Weird mouse behaviour

#7 2009-11-19 03:57:33

Re: [SOLVED]Weird mouse behaviour

#8 2009-11-19 04:00:22

Re: [SOLVED]Weird mouse behaviour

#9 2009-11-21 05:37:59

Re: [SOLVED]Weird mouse behaviour

#10 2009-11-21 05:49:48

Re: [SOLVED]Weird mouse behaviour

Board footer