Arch Linux

peque

Member

From: Denmark - Møn

Registered: 2005-06-26

Posts: 441

Problems with DVB

Hey Guys.

I have my MythTV setup at home with 2 HVR4000 DVB-S/S2 (Hauppauge) Which have runned without any problems earliere on.
But after getting a new Masterbackend server and added the HVR cards and ionstalled everything - something about the cards  goes wrong.

I have installed the lipian-s2 (I think they are named) drivers and downloaded the firmware.
But no matter what - I just getting several errors - and jumping backl out to main menu.

I cannot figure out what to do! - and where it goes wrong - sasc-ng log:

Dec 17 05:14:24.709 CSA: Got command(3): E idx: 1 pid: 0 key: 9a4a...08
Called cSascDvbDevice::SetCaDescr
Dec 17 05:14:34.660 CSA: Got command(3): O idx: 1 pid: 0 key: 1b0d...1a
Called cSascDvbDevice::SetCaDescr
Dec 17 05:14:44.599 CSA: Got command(3): E idx: 1 pid: 0 key: 8a8d...07
Called cSascDvbDevice::SetCaDescr
Dec 17 05:14:54.683 CSA: Got command(3): O idx: 1 pid: 0 key: eade...ba
Called cSascDvbDevice::SetCaDescr
Dec 17 05:15:04.650 CSA: Got command(3): E idx: 1 pid: 0 key: 1f8a...92
Called cSascDvbDevice::SetCaDescr
Dec 17 05:15:14.668 CSA: Got command(3): O idx: 1 pid: 0 key: 52f3...0d
Dec 17 05:15:20.773 CSA: Removing csa for rb: 3
Dec 17 05:15:21.966 CHANNEL: Clearing tuning cache due to switch cmd
Dec 17 05:15:22.309 CHANNEL: Clearing tuning cache due to switch cmd
Dec 17 05:15:22.669 CHANNEL: Clearing tuning cache due to switch cmd
Dec 17 05:15:22.843 CHANNEL: Clearing tuning cache due to switch cmd
Dec 17 05:15:22.901 CHANNEL: Tuning frontend (new)
Dec 17 05:15:22 [core.pids] 1: update SID 2130 (zero=0 noshift=0)
Dec 17 05:15:23 [core.pids] 1: pids typ5=0854 typ5=0853
Dec 17 05:15:23 [core.pids] 1: SID=2130 zero=0 | sid=1/2130/0 zero=-/-/- idle=-/-/-
Dec 17 05:15:23 [core.pids] 1: found handler for SID 2130 (1.1 idle=0 idx=1)
Dec 17 05:15:23 [core.pids] 1.1: pids on entry typ5=0853 typ5=0854 typ5=0858
Dec 17 05:15:23 [core.pids] 1.1: pids after delete typ5=0853 typ5=0854
Dec 17 05:15:23 [core.pids] 1.1: pids after add typ5=0853 typ5=0854
Dec 17 05:15:23 [core.pids] 1: update SID 2130 (zero=0 noshift=0)
Dec 17 05:15:23 [core.pids] 1: pids typ5=0853
Dec 17 05:15:23 [core.au] 1: stopping chain 090f
Dec 17 05:15:23 [core.ecm] 1.1: triggered SID 2130/2130 idx 1/1 mode 3/0 sync
Dec 17 05:15:23 [core.pids] 1: SID=2130 zero=0 | sid=1/2130/0 zero=-/-/- idle=-/-/-
Dec 17 05:15:23 [core.pids] 1: found handler for SID 2130 (1.1 idle=0 idx=1)
Dec 17 05:15:23 [core.pids] 1.1: pids on entry typ5=0853 typ5=0854
Dec 17 05:15:23 [core.pids] 1.1: pids after delete typ5=0853
Dec 17 05:15:23 [core.pids] 1.1: pids after add typ5=0853
Dec 17 05:15:24 [core.pids] 1: update SID 2130 (zero=0 noshift=1)
Dec 17 05:15:22.968 CHANNEL: Tuning frontend (new)
Dec 17 05:15:23 [core.au] 1: chain caid 0b00 -> Cardclient(-15) [0030-82/ff/00]
Dec 17 05:15:24 [core.ecm] 1.1: triggered SID 2130/2130 idx 1/1 mode 3/0 sync
Dec 17 05:15:24 [core.pids] 1: SID=2130 zero=0 | sid=1/2130/0 zero=-/-/- idle=-/-/-
Dec 17 05:15:24.356 CSA: Creating csa for rb: 3
sasc-ng: dvblb_plugins/plugin_ffdecsa.c:487: void process_ffd(msg*, unsigned int): Assertion `csa->rb' failed.
Dec 17 05:15:24 [core.pids] 1: found handler for SID 2130 (1.1 idle=0 idx=1)

Using Opensasc-ng to make it work for satelite:
But giving this error:

/usr/local/src/open-sasc-ng/src/open-sasc-ng-build/dvbloopback/module/dvb_loopback.c: frontend loopback driver v0.0.1
dvbloopback: registering 2 adapters
DVB: registering new adapter (DVB-LOOPBACK)
DVB: registering new adapter (DVB-LOOPBACK)
eth0: no IPv6 routers present
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
cx8800 0000:05:00.0: firmware: requesting dvb-fe-cx24116.fw
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.23.86.1
cx24116_firmware_ondemand: Firmware upload complete
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
cx88-mpeg driver manager 0000:05:04.2: firmware: requesting dvb-fe-cx24116.fw
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.23.86.1
cx24116_firmware_ondemand: Firmware upload complete
cx88[1]: irq mpeg  [0x80000] pci_abort*
cx88[1]/2-mpeg: general errors: 0x00080000
cx88[1]: irq mpeg  [0x80000] pci_abort*
cx88[1]/2-mpeg: general errors: 0x00080000
cx88[1]: irq mpeg  [0x80000] pci_abort*
cx88[1]/2-mpeg: general errors: 0x00080000
cx88[1]: irq mpeg  [0x80000] pci_abort*
cx88[1]/2-mpeg: general errors: 0x00080000
cx88[1]/2-mpeg: general errors: 0x00080000
cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
dvblb_fake_ioctl interrupted: 2150133582
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482
dvblb_fake_ioctl interrupted: 28482

Can someone tell me if there's a problem somewhere causiong this error - or have experienced something like that!

TIA
PBJ

---

Just getting better .... All the time

decaturguy

Member

From: Sweden

Registered: 2006-11-28

Posts: 117

Re: Problems with DVB

This is not Archlinux or Mythtv related problem.
You should try dvbn forums.
http://dvbn.happysat.org/viewforum.php? … eccc998710