You are not logged in.

#1 2009-12-20 14:53:18

3.14.TR
Member
Registered: 2009-08-15
Posts: 8

Samsung ES55

hi,
arch, KDE
after USB pluged camera Samsung ES55 no devices are recognized

i did not find any soft to make it running:-/
cd-rom was packed together with camera, but only for win

i have no card-reader and i don't know how to transfer photos into a computer

some codes...

[petr@petr-comp ~]$ dmesg|tail                                        
usb 1-7: USB disconnect, address 94                                   
usb 1-7: new high speed USB device using ehci_hcd and address 95      
usb 1-7: device not accepting address 95, error -71                   
usb 1-7: new high speed USB device using ehci_hcd and address 96      
usb 1-7: configuration #1 chosen from 1 choice                        
scsi176 : SCSI emulation for USB Mass Storage devices                 
usb-storage: device found at 96                                       
usb-storage: waiting for device to settle before scanning             
usb 1-7: USB disconnect, address 96                                   
usb 1-7: new high speed USB device using ehci_hcd and address 97      
[petr@petr-comp ~]$ sudo fdisk -l
[petr@petr-comp ~]$ sudo fdisk -l                                     
Heslo:                                                                

Disk /dev/sda: 500,1 GB, 500 107 862 016 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 60 801
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku:0xd8681796                       

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sda1   *           1          12       96358+  83  Linux
/dev/sda2              13         255     1951897+  83  Linux
/dev/sda3             256        5118    39062047+  83  Linux
/dev/sda4            5119       60801   447273697+   5  Rozšířený
/dev/sda5            5119       11197    48829536   83  Linux
/dev/sda6           11198       60801   398444098+  83  Linux

Disk /dev/sdb: 80,0 GB, 80 026 361 856 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 9 729
Jednotky = cylindry po 16065 * 512 = 8 225 280 bajtech
Identifikátor disku:0xf955f955

Zařízení Zavádět   Začátek       Konec    Bloky    Id  Systém
/dev/sdb1   *           1        5737    46082421    7  HPFS/NTFS
/dev/sdb2            6083        9729    29294527+  83  Linux
/dev/sdb3            5738        6082     2771212+   5  Rozšířený
/dev/sdb5            5738        6082     2771181   82  Linux swap/Solaris

Diskové oddíly jsou chybně seřazeny
[petr@petr-comp ~]$ lsusb
Bus 003 Device 003: ID 046d:c216 Logitech, Inc. Dual Action Gamepad
Bus 003 Device 002: ID 046d:c215 Logitech, Inc. Extreme 3D Pro
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

thanx for help.

Last edited by 3.14.TR (2009-12-23 07:41:57)

Offline

#2 2009-12-23 07:42:22

3.14.TR
Member
Registered: 2009-08-15
Posts: 8

Re: Samsung ES55

sad

Offline

#3 2010-01-04 20:23:44

ArchEnemy
Member
From: Mediterranean shores...
Registered: 2009-10-30
Posts: 3

Re: Samsung ES55

Hi, few days ago I was given this camera and it works ok. Make sure you have installed gphoto2 and libgphoto2 (and, if you want, digikam).

Offline

Board footer

Powered by FluxBB