You are not logged in.

#1 2010-01-13 18:02:39

xentalion
Member
From: Canada
Registered: 2010-01-06
Posts: 11
Website

[Solved] Unable to use all memory or unable to boot

I solved this issue by uninstalling the Nouveau drivers. So if you have both the NVIDIA binary drivers and nouveau installed and the computer doesn't boot past the UDev uevents line, try uninstalling the nouveau drivers.

Hello!

I've been having some problems with my desktop PC, and was wondering if anybody knows how to fix these problems.

First, my computer refuses to boot if I have my NVIDIA GeForce 8400 GS in the PCIe slot. It boots fine into Windows XP and 7.
What happens is that the computer boots all the way to "Waiting for UDev uevents to be processed", where it locks up, ignoring keyboard input.

I found that if I booted the computer with the option mem=6GB added to the kernel boot options, the computer boots properly. (Yes, I know, 6GB should be 6G)
however, this reduces my usable memory to 4GB.

This is what dmesg says:

Memory: 4565500k/6291456k available (3312k kernel code, 1573636k absent, 151368k reserved, 1752k data, 472k init)

If I remove the graphics card, the computer boots as normal, and shows all of my 6GB of ram.

Here is my entire dmesg output:

Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 7 22:28:29 CET 2010
Command line: root=/dev/sda1 mem=6GB ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009ffb0000 (usable)
 BIOS-e820: 000000009ffb0000 - 000000009ffc0000 (ACPI data)
 BIOS-e820: 000000009ffc0000 - 000000009fff0000 (ACPI NVS)
 BIOS-e820: 000000009fff0000 - 00000000a0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000001d0000000 (usable)
user-defined physical RAM map:
 user: 0000000000000000 - 000000000009fc00 (usable)
 user: 000000000009fc00 - 00000000000a0000 (reserved)
 user: 00000000000e8000 - 0000000000100000 (reserved)
 user: 0000000000100000 - 000000009ffb0000 (usable)
 user: 000000009ffb0000 - 000000009ffc0000 (ACPI data)
 user: 000000009ffc0000 - 000000009fff0000 (ACPI NVS)
 user: 000000009fff0000 - 00000000a0000000 (reserved)
 user: 00000000fec00000 - 00000000fec01000 (reserved)
 user: 00000000fee00000 - 00000000fef00000 (reserved)
 user: 00000000ff380000 - 0000000100000000 (reserved)
 user: 0000000100000000 - 0000000180000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFE0000000 write-back
  2 base 00A0000000 mask FFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 00000001d0000000 aka 7424M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x9ffb0 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009fc00 (usable)
 modified: 000000000009fc00 - 00000000000a0000 (reserved)
 modified: 00000000000e8000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000009ffb0000 (usable)
 modified: 000000009ffb0000 - 000000009ffc0000 (ACPI data)
 modified: 000000009ffc0000 - 000000009fff0000 (ACPI NVS)
 modified: 000000009fff0000 - 00000000a0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fee00000 - 00000000fef00000 (reserved)
 modified: 00000000ff380000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000180000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000009ffb0000
 0000000000 - 009fe00000 page 2M
 009fe00000 - 009ffb0000 page 4k
kernel direct mapping tables up to 9ffb0000 @ 10000-15000
init_memory_mapping: 0000000100000000-0000000180000000
 0100000000 - 0180000000 page 2M
kernel direct mapping tables up to 180000000 @ 13000-1a000
RAMDISK: 37f59000 - 37fef385
ACPI: RSDP 00000000000fa870 00014 (v00 ACPIAM)
ACPI: RSDT 000000009ffb0000 00038 (v01 A_M_I  OEMRSDT  08000708 MSFT 00000097)
ACPI: FACP 000000009ffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 000000009ffb0440 04C5F (v01  ALV6V ALV6V172 00000172 INTL 20051117)
ACPI: FACS 000000009ffc0000 00040
ACPI: APIC 000000009ffb0390 00070 (v01 A_M_I  OEMAPIC  08000708 MSFT 00000097)
ACPI: MCFG 000000009ffb0400 0003C (v01 A_M_I  OEMMCFG  08000708 MSFT 00000097)
ACPI: OEMB 000000009ffc0040 00060 (v01 A_M_I  AMI_OEM  08000708 MSFT 00000097)
ACPI: SSDT 000000009ffb50a0 00206 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0180000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000169c898]    TEXT DATA BSS ==> [0001000000 - 000169c898]
  #3 [0037f59000 - 0037fef385]          RAMDISK ==> [0037f59000 - 0037fef385]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [000169d000 - 000169d12b]              BRK ==> [000169d000 - 000169d12b]
  #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
  #7 [0000013000 - 0000015000]          PGTABLE ==> [0000013000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880001800000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00180000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0009ffb0
    0: 0x00100000 -> 0x00180000
On node 0 totalpages: 1179455
  DMA zone: 56 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3823 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 636904 pages, LIFO batch:31
  Normal zone: 7168 pages used for memmap
  Normal zone: 517120 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 000000009ffb0000 - 000000009ffc0000
PM: Registered nosave memory: 000000009ffc0000 - 000000009fff0000
PM: Registered nosave memory: 000000009fff0000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:5ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880005a00000 s89048 r8192 d21544 u1048576
pcpu-alloc: s89048 r8192 d21544 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1157847
Kernel command line: root=/dev/sda1 mem=6GB ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 4565500k/6291456k available (3312k kernel code, 1573636k absent, 151368k reserved, 1752k data, 472k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2209.953 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.06 BogoMIPS (lpj=7366510)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4421.68 BogoMIPS (lpj=7365900)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8842.75 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000b0000000 aka 2816M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [b0000000, fe0bffff]
TOM2: 00000001d0000000 aka 7424M
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [b0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [1d0000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - C5, should be 96 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xe00-0xe07]
pci 0000:00:08.0: reg 14 io port: [0xe20-0xe23]
pci 0000:00:08.0: reg 18 io port: [0xe40-0xe47]
pci 0000:00:08.0: reg 1c io port: [0xe60-0xe63]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:08.1: reg 10 io port: [0xe80-0xe87]
pci 0000:00:08.1: reg 14 io port: [0xea0-0xea3]
pci 0000:00:08.1: reg 18 io port: [0xec0-0xec7]
pci 0000:00:08.1: reg 1c io port: [0xee0-0xee3]
pci 0000:00:08.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xdbff7000-0xdbff7fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff]
pci 0000:00:0d.0: reg 1c 64bit mmio: [0xd9000000-0xd9ffffff]
pci 0000:00:0d.0: reg 30 32bit mmio pref: [0xdbfc0000-0xdbfdffff]
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource jiffies
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x80f has been reserved
system 00:09: ioport range 0x4000-0x407f has been reserved
system 00:09: ioport range 0x4080-0x40ff has been reserved
system 00:09: ioport range 0x4400-0x447f has been reserved
system 00:09: ioport range 0x4480-0x44ff has been reserved
system 00:09: ioport range 0x4800-0x487f has been reserved
system 00:09: ioport range 0x4880-0x48ff has been reserved
system 00:09: ioport range 0x2000-0x207f has been reserved
system 00:09: ioport range 0x2080-0x20ff has been reserved
system 00:09: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:09: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: ioport range 0x290-0x29f has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xafffffff could not be reserved
system 00:0f: iomem range 0xff380000-0xffffffff has been reserved
Switching to clocksource acpi_pm
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0:   IO window: disabled
pci 0000:00:04.0:   MEM window: disabled
pci 0000:00:04.0:   PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0:   IO window: 0xe000-0xefff
pci 0000:00:09.0:   MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0:   IO window: disabled
pci 0000:00:0b.0:   MEM window: disabled
pci 0000:00:0b.0:   PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0:   IO window: disabled
pci 0000:00:0c.0:   MEM window: disabled
pci 0000:00:0c.0:   PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 600k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1263386771.770:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 8920
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 472k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe00 ctl 0xe20 bmdma 0xc880 irq 23
ata2: SATA max UDMA/133 cmd 0xe40 ctl 0xe60 bmdma 0xc888 irq 23
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xe80 ctl 0xea0 bmdma 0xc000 irq 22
ata4: SATA max UDMA/133 cmd 0xec0 ctl 0xee0 bmdma 0xc008 irq 22
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
udev: starting version 146
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
NET: Registered protocol family 23
sd 0:0:0:0: Attached scsi generic sg0 type 0
processor LNXCPU:00: registered as cooling_device0
input: PC Speaker as /devices/platform/pcspkr/input/input4
processor LNXCPU:01: registered as cooling_device1
lp: driver loaded but no devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xdbffec00
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
i2c i2c-0: nForce2 SMBus adapter at 0x5000
i2c i2c-1: nForce2 SMBus adapter at 0x6000
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:07.0: setting latency timer to 64
EDAC MC: Ver: 2.1.0 Jan  7 2010
ppdev: user-space parallel port driver
lp0: using parport0 (interrupt-driven).
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
EDAC amd64_edac:  Ver: 3.2.0 Jan  7 2010
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[drm] Initialized drm 1.1.0 20060810
w83627ehf: Found W83627EHG chip at 0x290
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:46:79:3b
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
HDA Intel 0000:00:05.0: setting latency timer to 64
hda_codec: ALC888: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xdbfff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
 Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
 Also, use of the override can cause unknown side effects.
amd64_edac: probe of 0000:00:18.2 failed with error -22
nvidia 0000:00:0d.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 21 (level, low) -> IRQ 21
nvidia 0000:00:0d.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.53  Wed Dec  9 15:29:46 PST 2009
usb 2-4: new low speed USB device using ohci_hcd and address 2
usb 2-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input6
generic-usb 0003:15D9:0A37.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-4/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT3 FS on sda1, internal journal
Adding 2650684k swap on /dev/sda5.  Priority:-1 extents:1 across:2650684k 
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present

Any thoughts or suggestions would be much appreciated. smile

Last edited by xentalion (2010-01-14 14:38:15)

Offline

#2 2010-01-13 18:07:19

xentalion
Member
From: Canada
Registered: 2010-01-06
Posts: 11
Website

Re: [Solved] Unable to use all memory or unable to boot

Also, (don't know if this is relevant) but I've got three sticks of ram: 2 2GB modules and 2 1GB modules. They are grouped together properly.

Offline

Board footer

Powered by FluxBB