You are not logged in.

Pages: 1

#1 2010-02-06 20:21:59

ShadowKyogre
Member
From: Hell! XP No... I'm not telling
Registered: 2008-12-19
Posts: 476
Website

Xorg upgrade causes X to crash rndmly + Firefox optimized gifs flash

After a recent upgrade, I've had two issues occuring:
1. X crashing into unloginable console: This one is new, although one of my friends suggests it maybe my hard drive failing (I've had random crashes before, but it was just the screen freezing). Even if I've turned on the computer for a short amount of time, sometimes it'll automatically drop to a blank terminal. The only way around this is to restart my pc. If it helps, I'll try to grab an error log the next time this happens.

2. Optimized gifs are flashy in firefox 3.6.2. It's easiest to see the error here: http://meowlaplz.deviantart.com/

3. Alsa's not working: Even when I unmute it. I'm not sure why. <-- No longer applicable

The upgrade that I did recently is copy-pasted from my /var/log/pacman.log

[2010-02-02 17:48] synchronizing package lists
[2010-02-02 17:49] starting full system upgrade
[2010-02-02 18:50] upgraded wxgtk (2.8.10.1-5 -> 2.8.10.1-6)
[2010-02-02 18:50] upgraded visualboyadvance (1.7.2-5 -> 1.7.2-6)
[2010-02-02 18:50] upgraded thunderbird (3.0-3 -> 3.0.1-1)
[2010-02-02 18:50] NOTE:
[2010-02-02 18:50]   If you experience any problems after upgrading xsane 
[2010-02-02 18:50]   it may help to remove the setup and preferences files
[2010-02-02 18:50]   of xsane:
[2010-02-02 18:50] 
[2010-02-02 18:50]     $ rm -rf ~/.sane/xsane
[2010-02-02 18:50] 
[2010-02-02 18:50] upgraded xsane (0.997-1 -> 0.997-2)
[2010-02-02 18:50] upgraded libpng (1.2.40-1 -> 1.4.0-2)
[2010-02-02 18:50] upgraded zsnes (1.51-6 -> 1.51-7)
[2010-02-02 18:50] upgraded xterm (250-1 -> 255-1)
[2010-02-02 19:00] upgraded libjpeg (7-1 -> 8-1)
[2010-02-02 19:00] upgraded libtiff (3.9.2-1 -> 3.9.2-2)
[2010-02-02 19:00] upgraded libgphoto2 (2.4.7-1 -> 2.4.7-2)
[2010-02-02 19:00] NOTE
[2010-02-02 19:00] ----
[2010-02-02 19:00] Add your user to group 'scanner' to use scanner devices.
[2010-02-02 19:00] upgraded sane (1.0.20-3 -> 1.0.20-5)
[2010-02-02 19:00] upgraded xine-lib (1.1.17-2 -> 1.1.17-3)
[2010-02-02 19:24] upgraded gimp (2.6.8-1 -> 2.6.8-2)
[2010-02-02 19:30] upgraded cairo (1.8.8-1 -> 1.8.8-2)
[2010-02-02 19:30] upgraded libcups (1.4.2-2 -> 1.4.2-3)
[2010-02-02 19:30] upgraded gtk2 (2.18.5-1 -> 2.18.6-1)
[2010-02-02 19:31] starting full system upgrade
[2010-02-02 20:52] upgraded bash (4.1.002-1 -> 4.1.002-2)
[2010-02-02 20:52] upgraded cairomm (1.8.2-1 -> 1.8.4-1)
[2010-02-02 20:52] upgraded device-mapper (2.02.53-1 -> 2.02.60-2)
[2010-02-02 20:52] upgraded cryptsetup (1.0.7-1 -> 1.1.0-1)
[2010-02-02 20:52] upgraded lcms (1.18-2 -> 1.18-3)
[2010-02-02 20:52] upgraded poppler (0.12.2-1 -> 0.12.3-1)
[2010-02-02 20:52] upgraded cups (1.4.2-2 -> 1.4.2-3)
[2010-02-02 20:52] upgraded dhcpcd (5.1.4-1 -> 5.1.5-1)
[2010-02-02 20:52] upgraded dialog (1.1_20080819-3 -> 1.1_20100119-1)
[2010-02-02 20:52] upgraded eigen (2.0.9-1 -> 2.0.11-1)
[2010-02-02 20:52] upgraded facile (1.1-10 -> 1.1-11)
[2010-02-02 20:52] upgraded imlib2 (1.4.2-3 -> 1.4.2-6)
[2010-02-02 20:52] upgraded ffmpeg (20100108-2 -> 20100108-3)
[2010-02-02 20:52] upgraded file (5.04-1 -> 5.04-2)
[2010-02-02 20:53] upgraded xulrunner (1.9.1.7-1 -> 1.9.2-2)
[2010-02-02 20:53] upgraded firefox (3.5.7-1 -> 3.6-2)
[2010-02-02 20:53] upgraded fltk (1.1.9-2 -> 1.1.9-3)
[2010-02-02 20:53] upgraded gcolor2 (0.4-4 -> 0.4-5)
[2010-02-02 20:53] upgraded gegl (0.1.0-1 -> 0.1.0-2)
[2010-02-02 20:53] upgraded jasper (1.900.1-3 -> 1.900.1-4)
[2010-02-02 20:53] upgraded ghostscript (8.70-3 -> 8.70-4)
[2010-02-02 20:53] upgraded glib2 (2.22.3-1 -> 2.22.4-1)
[2010-02-02 20:53] upgraded librsvg (2.26.0-1 -> 2.26.0-2)
[2010-02-02 20:53] upgraded libx11 (1.3.2-1 -> 1.3.3-1)
[2010-02-02 20:53] upgraded libwmf (0.2.8.4-5 -> 0.2.8.4-7)
[2010-02-02 20:53] upgraded imagemagick (6.5.8.5-1 -> 6.5.9.0-2)
[2010-02-02 20:53] warning: /etc/modprobe.d/framebuffer_blacklist.conf installed as /etc/modprobe.d/framebuffer_blacklist.conf.pacnew
[2010-02-02 20:53] upgraded udev (146-2 -> 151-2)
[2010-02-02 20:53] warning: /etc/inittab installed as /etc/inittab.pacnew
[2010-02-02 20:53] upgraded initscripts (2009.08-1 -> 2010.01-1)
[2010-02-02 20:53] upgraded kdebase-runtime (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded k3b (1.69.0alpha4-1 -> 1.70.0beta1-1)
[2010-02-02 20:53] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2010-02-02 20:53] upgraded kdebase-workspace (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded libmng (1.0.10-2 -> 1.0.10-3)
[2010-02-02 20:53] upgraded qt (4.5.3-3 -> 4.5.3-4)
[2010-02-02 20:53] upgraded kdelibs (4.3.4-2 -> 4.3.4-3)
[2010-02-02 20:53] upgraded kdegraphics-libs (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded kdegraphics-gwenview (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded kdegraphics-kolourpaint (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded kdegraphics-ksnapshot (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded libdjvu (3.5.22-2 -> 3.5.22-3)
[2010-02-02 20:53] upgraded poppler-qt (0.12.2-1 -> 0.12.3-1)
[2010-02-02 20:53] upgraded kdegraphics-okular (4.3.4-1 -> 4.3.4-2)
[2010-02-02 20:53] upgraded kernel26-firmware (2.6.32.6-1 -> 2.6.32.7-1)
[2010-02-02 20:54] >>> Updating module dependencies. Please wait ...
[2010-02-02 20:54] >>> MKINITCPIO SETUP
[2010-02-02 20:54] >>> ----------------
[2010-02-02 20:54] >>> If you use LVM2, Encrypted root or software RAID,
[2010-02-02 20:54] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-02-02 20:54] >>> More information about mkinitcpio setup can be found here:
[2010-02-02 20:54] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-02-02 20:54] 
[2010-02-02 20:54] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2010-02-02 20:54] ==> Building image "default"
[2010-02-02 20:54] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-02-02 20:54] :: Begin build
[2010-02-02 20:54] :: Parsing hook [base]
[2010-02-02 20:54] :: Parsing hook [udev]
[2010-02-02 20:54] :: Parsing hook [autodetect]
[2010-02-02 20:54] :: Parsing hook [pata]
[2010-02-02 20:54] :: Parsing hook [scsi]
[2010-02-02 20:54] :: Parsing hook [sata]
[2010-02-02 20:54] :: Parsing hook [usb]
[2010-02-02 20:54] :: Parsing hook [pcmcia]
[2010-02-02 20:54] :: Parsing hook [usbinput]
[2010-02-02 20:54] :: Parsing hook [keymap]
[2010-02-02 20:54] :: Parsing hook [filesystems]
[2010-02-02 20:54] :: Generating module dependencies
[2010-02-02 20:54] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-02-02 20:54] ==> SUCCESS
[2010-02-02 20:54] ==> Building image "fallback"
[2010-02-02 20:54] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-02-02 20:54] :: Begin build
[2010-02-02 20:54] :: Parsing hook [base]
[2010-02-02 20:54] :: Parsing hook [udev]
[2010-02-02 20:54] :: Parsing hook [pata]
[2010-02-02 20:55] :: Parsing hook [scsi]
[2010-02-02 20:55] :: Parsing hook [sata]
[2010-02-02 20:55] :: Parsing hook [usb]
[2010-02-02 20:55] :: Parsing hook [pcmcia]
[2010-02-02 20:56] :: Parsing hook [usbinput]
[2010-02-02 20:56] :: Parsing hook [keymap]
[2010-02-02 20:56] :: Parsing hook [filesystems]
[2010-02-02 20:56] :: Generating module dependencies
[2010-02-02 20:56] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-02-02 20:56] ==> SUCCESS
[2010-02-02 20:56] upgraded kernel26 (2.6.32.6-1 -> 2.6.32.7-1)
[2010-02-02 20:56] upgraded libdrm (2.4.17-2 -> 2.4.17-3)
[2010-02-02 20:56] upgraded libmysqlclient (5.1.42-1 -> 5.1.42-2)
[2010-02-02 20:56] upgraded libtasn1 (2.2-1 -> 2.4-1)
[2010-02-02 20:56] upgraded libthai (0.1.12-1 -> 0.1.13-1)
[2010-02-02 20:56] upgraded lvm2 (2.02.53-1 -> 2.02.60-2)
[2010-02-02 20:56] upgraded mdadm (2.6.9-1 -> 3.1.1-1)
[2010-02-02 20:56] upgraded mysql-clients (5.1.42-1 -> 5.1.42-2)
[2010-02-02 20:56] upgraded mysql (5.1.42-1 -> 5.1.42-2)
[2010-02-02 20:56] upgraded notification-daemon (0.4.0-3 -> 0.4.0-4)
[2010-02-02 20:56] upgraded obex-data-server (0.4.4-1 -> 0.4.4-2)
[2010-02-02 20:57] upgraded ocaml (3.11.1-2 -> 3.11.2-1)
[2010-02-02 20:57] upgraded redland (1.0.10-1 -> 1.0.10-2)
[2010-02-02 20:57]  * relogin or source /etc/profile.d/openoffice.sh
[2010-02-02 20:57]  * see http://wiki.archlinux.org/index.php/Openoffice
[2010-02-02 20:57]    how to use extensions, e.g. for spell checking
[2010-02-02 20:57]    see /usr/lib/openoffice/share/extension/install what
[2010-02-02 20:57]    is shipped with this package
[2010-02-02 20:57]  * make sure you have installed a ttf font (ttf-dejavu recommended)
[2010-02-02 20:57] upgraded openoffice-base (3.1.1-2 -> 3.1.1-3)
[2010-02-02 20:57] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2010-02-02 20:57] upgraded pacman-mirrorlist (20091206-1 -> 20100131-1)
[2010-02-02 20:57] upgraded parted (1.9.0-3 -> 2.1-1)
[2010-02-02 20:57] upgraded pciutils (3.1.5-1 -> 3.1.6-1)
[2010-02-02 20:57] upgraded pcmciautils (015-2 -> 016-1)
[2010-02-02 20:57] upgraded pm-utils (1.2.6.1-3 -> 1.2.6.1-4)
[2010-02-02 20:57] upgraded polkit (0.95-1 -> 0.96-1)
[2010-02-02 20:57] upgraded pycairo (1.8.6-1 -> 1.8.8-1)
[2010-02-02 20:57] upgraded qscintilla (2.4.0-1 -> 2.4.0-2)
[2010-02-02 20:57] upgraded pyqt (4.6.2-1 -> 4.6.2-2)
[2010-02-02 20:57] upgraded qtcurve-gtk2 (1.0.1-1 -> 1.0.2-1)
[2010-02-02 20:57] upgraded qtscriptgenerator (0.1.0-1 -> 0.1.0-3)
[2010-02-02 20:57] upgraded rrdtool (1.4.2-1 -> 1.4.2-2)
[2010-02-02 20:57] upgraded xfsprogs (3.1.0-1 -> 3.1.1-1)
[2010-02-02 20:57] upgraded xkeyboard-config (1.6-1 -> 1.8-1)
[2010-02-02 20:57] upgraded xorg-apps (7.5-2 -> 7.5-3)
[2010-02-02 20:57] upgraded xorg-server (1.7.3.902-1 -> 1.7.4.901-1)

~/.xsession-errors at the time of the crash:

OpenOffice path is '/usr/lib/openoffice'
Calling appendChild() on a null node does nothing.
Couldn't resolve property: linearGradient3219
Couldn't resolve property: linearGradient25069
Couldn't resolve property: linearGradient3219
Couldn't resolve property: linearGradient25069
Calling appendChild() on a null node does nothing.
Calling appendChild() on a null node does nothing.
kdeinit4: preparing to launch /usr/lib/kde4/libexec/kdesud
!!! [Hook] hook(): title not found
!!! [Hook] hook(): title not found
bye bye 
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kio_http_cache_cleaner.so

Xorg.0.log

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.4.901 (1.7.5 RC 1)
Release Date: 2010-01-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686 
Current Operating System: Linux myhost 2.6.32-ARCH #1 SMP PREEMPT Fri Jan 29 08:50:05 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/45fc6c54-bb84-4855-8cff-31cbb50de4dd ro 5
Build Date: 31 January 2010  11:40:13AM
 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  6 14:00:04 2010
(II) Loader magic: 0x81e5100
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2772:1019:2624 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xfea80000/524288, 0xd0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default intel Device 0"
        Driver    "intel"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default intel Screen 0"
        Device    "Builtin Default intel Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default intel Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.9.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID vendor "VSC", prod id 55584
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA1 using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (410, 260) mm
(**) intel(0): DPI set to (104, 102)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.4.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event1"
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE)
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Natural® Ergonomic Keyboard 4000
(**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
(**) Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event3"
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found keys
(II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
(II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
(**) Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
(**) Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Microsoft Natural® Ergonomic Keyboard 4000: failed to initialize for relative axes.
(**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
(**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
(II) Microsoft Natural® Ergonomic Keyboard 4000: initialized for absolute axes.
(II) config/hal: Adding input device Microsoft Natural® Ergonomic Keyboard 4000
(**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
(**) Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event2"
(II) Microsoft Natural® Ergonomic Keyboard 4000: Found keys
(II) Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "VSC", prod id 55584
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): EDID vendor "VSC", prod id 55584
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)

Last edited by ShadowKyogre (2010-02-08 06:08:34)

For every problem, there is a solution that is:
Clean
Simple and most of all...wrong!
Github page

Offline

#2 2010-02-06 20:36:40

loafer
Member
From: the pub
Registered: 2009-04-14
Posts: 1,772

Re: Xorg upgrade causes X to crash rndmly + Firefox optimized gifs flash

ignore:  I didn't read he upgrade list

Last edited by loafer (2010-02-06 20:38:22)

All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.

Offline

#3 2010-02-06 20:40:18

combuster
Member
From: Serbia
Registered: 2008-09-30
Posts: 711
Website

Re: Xorg upgrade causes X to crash rndmly + Firefox optimized gifs flash

Do you by any chance have a laptop with intel gpu ?

Offline

#4 2010-02-06 20:58:05

ShadowKyogre
Member
From: Hell! XP No... I'm not telling
Registered: 2008-12-19
Posts: 476
Website

Re: Xorg upgrade causes X to crash rndmly + Firefox optimized gifs flash

combuster wrote:

Do you by any chance have a laptop with intel gpu ?

No, the upgrade log is from my desktop computer. X_x that reminds me, I forgot to add something else to the list I didn't put earlier (sound not working).

For every problem, there is a solution that is:
Clean
Simple and most of all...wrong!
Github page

Offline

Pages: 1

Board footer

Powered by FluxBB