Bug related to ACPI

Anril · 2010-03-08 23:03:58

After update few weeks ago (cant say when exactly since i was testing where the problem is for few weeks) i noticed that sometimes computer would freeze during boot at sata recognition part right before daemons gets started. It would also hang during boot at loading daemons but i could make it resume if i press any keyboard key and sometimes it would hang several times before i would get Xfce to fully load. I found out that its related to ACPI, since when i turn it off i dont get error messages about it in log files. Turning ACPI off also fixed a strange bug where my keyboard is not repeating key strokes when i keep one key pressed, it starts to repeat but then stops after only few repeats and i need to keep pressing it to make it start repeating again, its also noticeable when i press tab to finish command and i see 1-2 sec delay. After i pass acpi=off at boot all of this goes away. I get same bug on both Arch linux x86 and x86_64.

Hardware iam running: Athlon II x4, AMD 790X + SB750 Chipset, ATI Radeon 4850 with catalyst 10.2

here are log files:

errors.log

Mar  8 23:31:15 myhost kernel: pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
Mar  8 23:31:15 myhost kernel: ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]

messages.log

Mar  8 23:31:15 myhost kernel: Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Feb 23 19:43:46 CET 2010
Mar  8 23:31:15 myhost kernel: Command line: root=/dev/disk/by-uuid/46de3af5-cfd8-4fe1-a794-8fc0df9b6bf5 ro vga=775
Mar  8 23:31:15 myhost kernel: KERNEL supported cpus:
Mar  8 23:31:15 myhost kernel: Intel GenuineIntel
Mar  8 23:31:15 myhost kernel: AMD AuthenticAMD
Mar  8 23:31:15 myhost kernel: Centaur CentaurHauls
Mar  8 23:31:15 myhost kernel: BIOS-provided physical RAM map:
Mar  8 23:31:15 myhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar  8 23:31:15 myhost kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Mar  8 23:31:15 myhost kernel: DMI 2.4 present.
Mar  8 23:31:15 myhost kernel: last_pfn = 0x130000 max_arch_pfn = 0x400000000
Mar  8 23:31:15 myhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar  8 23:31:15 myhost kernel: last_pfn = 0xcfde0 max_arch_pfn = 0x400000000
Mar  8 23:31:15 myhost kernel: Scanning 1 areas for low memory corruption
Mar  8 23:31:15 myhost kernel: modified physical RAM map:
Mar  8 23:31:15 myhost kernel: modified: 0000000000000000 - 0000000000001000 (usable)
Mar  8 23:31:15 myhost kernel: modified: 0000000000001000 - 0000000000006000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 0000000000006000 - 000000000009f800 (usable)
Mar  8 23:31:15 myhost kernel: modified: 000000000009f800 - 00000000000a0000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 00000000000f0000 - 0000000000100000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 0000000000100000 - 00000000cfde0000 (usable)
Mar  8 23:31:15 myhost kernel: modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
Mar  8 23:31:15 myhost kernel: modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
Mar  8 23:31:15 myhost kernel: modified: 00000000cfdf0000 - 00000000cfe00000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 00000000e0000000 - 00000000f0000000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 00000000fec00000 - 0000000100000000 (reserved)
Mar  8 23:31:15 myhost kernel: modified: 0000000100000000 - 0000000130000000 (usable)
Mar  8 23:31:15 myhost kernel: Using GB pages for direct mapping
Mar  8 23:31:15 myhost kernel: init_memory_mapping: 0000000000000000-00000000cfde0000
Mar  8 23:31:15 myhost kernel: init_memory_mapping: 0000000100000000-0000000130000000
Mar  8 23:31:15 myhost kernel: RAMDISK: 37e4a000 - 37fef684
Mar  8 23:31:15 myhost kernel: ACPI: RSDP 00000000000f6fe0 00014 (v00 GBT   )
Mar  8 23:31:15 myhost kernel: ACPI: RSDT 00000000cfde3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Mar  8 23:31:15 myhost kernel: ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Mar  8 23:31:15 myhost kernel: ACPI: DSDT 00000000cfde30c0 06EE4 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
Mar  8 23:31:15 myhost kernel: ACPI: FACS 00000000cfde0000 00040
Mar  8 23:31:15 myhost kernel: ACPI: HPET 00000000cfdea080 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
Mar  8 23:31:15 myhost kernel: ACPI: MCFG 00000000cfdea0c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Mar  8 23:31:15 myhost kernel: ACPI: TAMG 00000000cfdea100 0030A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
Mar  8 23:31:15 myhost kernel: ACPI: APIC 00000000cfde9fc0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Mar  8 23:31:15 myhost kernel: (8 early reservations) ==> bootmem [0000000000 - 0130000000]
Mar  8 23:31:15 myhost kernel: #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Mar  8 23:31:15 myhost kernel: #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Mar  8 23:31:15 myhost kernel: #2 [0001000000 - 000169e898]    TEXT DATA BSS ==> [0001000000 - 000169e898]
Mar  8 23:31:15 myhost kernel: #3 [0037e4a000 - 0037fef684]          RAMDISK ==> [0037e4a000 - 0037fef684]
Mar  8 23:31:15 myhost kernel: #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
Mar  8 23:31:15 myhost kernel: #5 [000169f000 - 000169f0fe]              BRK ==> [000169f000 - 000169f0fe]
Mar  8 23:31:15 myhost kernel: #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
Mar  8 23:31:15 myhost kernel: #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
Mar  8 23:31:15 myhost kernel: found SMP MP-table at [ffff8800000f55d0] f55d0
Mar  8 23:31:15 myhost kernel: Zone PFN ranges:
Mar  8 23:31:15 myhost kernel: DMA      0x00000000 -> 0x00001000
Mar  8 23:31:15 myhost kernel: DMA32    0x00001000 -> 0x00100000
Mar  8 23:31:15 myhost kernel: Normal   0x00100000 -> 0x00130000
Mar  8 23:31:15 myhost kernel: Movable zone start PFN for each node
Mar  8 23:31:15 myhost kernel: early_node_map[4] active PFN ranges
Mar  8 23:31:15 myhost kernel: 0: 0x00000000 -> 0x00000001
Mar  8 23:31:15 myhost kernel: 0: 0x00000006 -> 0x0000009f
Mar  8 23:31:15 myhost kernel: 0: 0x00000100 -> 0x000cfde0
Mar  8 23:31:15 myhost kernel: 0: 0x00100000 -> 0x00130000
Mar  8 23:31:15 myhost kernel: ACPI: PM-Timer IO Port: 0x4008
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Mar  8 23:31:15 myhost kernel: ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Mar  8 23:31:15 myhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  8 23:31:15 myhost kernel: IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Mar  8 23:31:15 myhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  8 23:31:15 myhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar  8 23:31:15 myhost kernel: Using ACPI (MADT) for SMP configuration information
Mar  8 23:31:15 myhost kernel: ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Mar  8 23:31:15 myhost kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 0000000000001000 - 0000000000006000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Mar  8 23:31:15 myhost kernel: Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
Mar  8 23:31:15 myhost kernel: Booting paravirtualized kernel on bare hardware
Mar  8 23:31:15 myhost kernel: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
Mar  8 23:31:15 myhost kernel: PERCPU: Embedded 29 pages/cpu @ffff880005400000 s88984 r8192 d21608 u524288
Mar  8 23:31:15 myhost kernel: pcpu-alloc: s88984 r8192 d21608 u524288 alloc=1*2097152
Mar  8 23:31:15 myhost kernel: pcpu-alloc: [0] 0 1 2 3 
Mar  8 23:31:15 myhost kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030804
Mar  8 23:31:15 myhost kernel: Kernel command line: root=/dev/disk/by-uuid/46de3af5-cfd8-4fe1-a794-8fc0df9b6bf5 ro vga=775
Mar  8 23:31:15 myhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar  8 23:31:15 myhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mar  8 23:31:15 myhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mar  8 23:31:15 myhost kernel: Initializing CPU#0
Mar  8 23:31:15 myhost kernel: Checking aperture...
Mar  8 23:31:15 myhost kernel: No AGP bridge found
Mar  8 23:31:15 myhost kernel: Node 0: aperture @ 20000000 size 32 MB
Mar  8 23:31:15 myhost kernel: Aperture pointing to e820 RAM. Ignoring.
Mar  8 23:31:15 myhost kernel: Your BIOS doesn't leave a aperture memory hole
Mar  8 23:31:15 myhost kernel: Please enable the IOMMU option in the BIOS setup
Mar  8 23:31:15 myhost kernel: This costs you 64 MB of RAM
Mar  8 23:31:15 myhost kernel: Mapping aperture over 65536 KB of RAM @ 20000000
Mar  8 23:31:15 myhost kernel: PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Mar  8 23:31:15 myhost kernel: Memory: 4050336k/4980736k available (3315k kernel code, 789016k absent, 140408k reserved, 1758k data, 472k init)
Mar  8 23:31:15 myhost kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mar  8 23:31:15 myhost kernel: Hierarchical RCU implementation.
Mar  8 23:31:15 myhost kernel: NR_IRQS:768
Mar  8 23:31:15 myhost kernel: Console: colour dummy device 80x25
Mar  8 23:31:15 myhost kernel: console [tty0] enabled
Mar  8 23:31:15 myhost kernel: HPET: 4 timers in total, 1 timers will be used for per-cpu timer
Mar  8 23:31:15 myhost kernel: Fast TSC calibration using PIT
Mar  8 23:31:15 myhost kernel: Detected 3315.373 MHz processor.
Mar  8 23:31:15 myhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6633.01 BogoMIPS (lpj=11051226)
Mar  8 23:31:15 myhost kernel: Security Framework initialized
Mar  8 23:31:15 myhost kernel: Mount-cache hash table entries: 256
Mar  8 23:31:15 myhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: Physical Processor ID: 0
Mar  8 23:31:15 myhost kernel: CPU: Processor Core ID: 0
Mar  8 23:31:15 myhost kernel: mce: CPU supports 6 MCE banks
Mar  8 23:31:15 myhost kernel: using C1E aware idle routine
Mar  8 23:31:15 myhost kernel: Performance Events: AMD PMU driver.
Mar  8 23:31:15 myhost kernel: ... version:                0
Mar  8 23:31:15 myhost kernel: ... bit width:              48
Mar  8 23:31:15 myhost kernel: ... generic registers:      4
Mar  8 23:31:15 myhost kernel: ... value mask:             0000ffffffffffff
Mar  8 23:31:15 myhost kernel: ... max period:             00007fffffffffff
Mar  8 23:31:15 myhost kernel: ... fixed-purpose events:   0
Mar  8 23:31:15 myhost kernel: ... event mask:             000000000000000f
Mar  8 23:31:15 myhost kernel: ACPI: Core revision 20090903
Mar  8 23:31:15 myhost kernel: Setting APIC routing to flat
Mar  8 23:31:15 myhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar  8 23:31:15 myhost kernel: CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02
Mar  8 23:31:15 myhost kernel: Booting processor 1 APIC 0x1 ip 0x6000
Mar  8 23:31:15 myhost kernel: Initializing CPU#1
Mar  8 23:31:15 myhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: Physical Processor ID: 0
Mar  8 23:31:15 myhost kernel: CPU: Processor Core ID: 1
Mar  8 23:31:15 myhost kernel: CPU1: AMD Athlon(tm) II X4 620 Processor stepping 02
Mar  8 23:31:15 myhost kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Mar  8 23:31:15 myhost kernel: System has AMD C1E enabled
Mar  8 23:31:15 myhost kernel: Switch to broadcast mode on CPU0
Mar  8 23:31:15 myhost kernel: Switch to broadcast mode on CPU1
Mar  8 23:31:15 myhost kernel: Booting processor 2 APIC 0x2 ip 0x6000
Mar  8 23:31:15 myhost kernel: Initializing CPU#2
Mar  8 23:31:15 myhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: Physical Processor ID: 0
Mar  8 23:31:15 myhost kernel: CPU: Processor Core ID: 3
Mar  8 23:31:15 myhost kernel: CPU2: AMD Athlon(tm) II X4 620 Processor stepping 02
Mar  8 23:31:15 myhost kernel: checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Mar  8 23:31:15 myhost kernel: Switch to broadcast mode on CPU2
Mar  8 23:31:15 myhost kernel: Booting processor 3 APIC 0x3 ip 0x6000
Mar  8 23:31:15 myhost kernel: Initializing CPU#3
Mar  8 23:31:15 myhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Mar  8 23:31:15 myhost kernel: CPU: Physical Processor ID: 0
Mar  8 23:31:15 myhost kernel: CPU: Processor Core ID: 2
Mar  8 23:31:15 myhost kernel: CPU3: AMD Athlon(tm) II X4 620 Processor stepping 02
Mar  8 23:31:15 myhost kernel: checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Mar  8 23:31:15 myhost kernel: Brought up 4 CPUs
Mar  8 23:31:15 myhost kernel: Total of 4 processors activated (26531.81 BogoMIPS).
Mar  8 23:31:15 myhost kernel: Switch to broadcast mode on CPU3
Mar  8 23:31:15 myhost kernel: NET: Registered protocol family 16
Mar  8 23:31:15 myhost kernel: TOM: 00000000d0000000 aka 3328M
Mar  8 23:31:15 myhost kernel: TOM2: 0000000130000000 aka 4864M
Mar  8 23:31:15 myhost kernel: ACPI: bus type pci registered
Mar  8 23:31:15 myhost kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Mar  8 23:31:15 myhost kernel: PCI: MCFG area at e0000000 reserved in E820
Mar  8 23:31:15 myhost kernel: PCI: Using MMCONFIG at e0000000 - efffffff
Mar  8 23:31:15 myhost kernel: PCI: Using configuration type 1 for base access
Mar  8 23:31:15 myhost kernel: bio: create slab <bio-0> at 0
Mar  8 23:31:15 myhost kernel: ACPI: Interpreter enabled
Mar  8 23:31:15 myhost kernel: ACPI: (supports S0 S3 S4 S5)
Mar  8 23:31:15 myhost kernel: ACPI: Using IOAPIC for interrupt routing
Mar  8 23:31:15 myhost kernel: ACPI: No dock devices found.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0: PME# disabled
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0: PME# disabled
Mar  8 23:31:15 myhost kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Mar  8 23:31:15 myhost kernel: pci 0000:00:12.2: PME# disabled
Mar  8 23:31:15 myhost kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Mar  8 23:31:15 myhost kernel: pci 0000:00:13.2: PME# disabled
Mar  8 23:31:15 myhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mar  8 23:31:15 myhost kernel: pci 0000:02:00.0: PME# disabled
Mar  8 23:31:15 myhost kernel: pci 0000:00:14.4: transparent bridge
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Mar  8 23:31:15 myhost kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Mar  8 23:31:15 myhost kernel: vgaarb: loaded
Mar  8 23:31:15 myhost kernel: PCI: Using ACPI for IRQ routing
Mar  8 23:31:15 myhost kernel: pci 0000:00:00.0: BAR 3: can't allocate resource
Mar  8 23:31:15 myhost kernel: NetLabel: Initializing
Mar  8 23:31:15 myhost kernel: NetLabel:  domain hash size = 128
Mar  8 23:31:15 myhost kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Mar  8 23:31:15 myhost kernel: NetLabel:  unlabeled traffic allowed by default
Mar  8 23:31:15 myhost kernel: Switching to clocksource tsc
Mar  8 23:31:15 myhost kernel: pnp: PnP ACPI init
Mar  8 23:31:15 myhost kernel: ACPI: bus type pnp registered
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp 00:09: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Mar  8 23:31:15 myhost kernel: pnp: PnP ACPI: found 10 devices
Mar  8 23:31:15 myhost kernel: ACPI: ACPI bus type pnp unregistered
Mar  8 23:31:15 myhost kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:01: ioport range 0x220-0x225 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:01: ioport range 0x290-0x294 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x4100-0x411f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x228-0x22f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x40b-0x40b has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x4d6-0x4d6 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xc00-0xc01 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xc14-0xc14 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xc50-0xc52 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xc6c-0xc6d has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xc6f-0xc6f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xcd0-0xcd1 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xcd2-0xcd3 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xcd4-0xcdf has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x4000-0x40fe has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0x4210-0x4217 has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xb00-0xb0f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xb10-0xb1f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:02: ioport range 0xb20-0xb3f has been reserved
Mar  8 23:31:15 myhost kernel: system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
Mar  8 23:31:15 myhost kernel: system 00:09: iomem range 0xcfde0000-0xcfdfffff could not be reserved
Mar  8 23:31:15 myhost kernel: system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
Mar  8 23:31:15 myhost kernel: system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
Mar  8 23:31:15 myhost kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  8 23:31:15 myhost kernel: system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0:   IO window: 0xe000-0xefff
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0:   MEM window: 0xfde00000-0xfdefffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0:   MEM window: 0xfdb00000-0xfdbfffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
Mar  8 23:31:15 myhost kernel: pci 0000:00:14.4:   IO window: 0xc000-0xcfff
Mar  8 23:31:15 myhost kernel: pci 0000:00:14.4:   MEM window: 0xfdd00000-0xfddfffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:14.4:   PREFETCH window: 0xfdc00000-0xfdcfffff
Mar  8 23:31:15 myhost kernel: pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: NET: Registered protocol family 2
Mar  8 23:31:15 myhost kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mar  8 23:31:15 myhost kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Mar  8 23:31:15 myhost kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Mar  8 23:31:15 myhost kernel: TCP: Hash tables configured (established 262144 bind 65536)
Mar  8 23:31:15 myhost kernel: TCP reno registered
Mar  8 23:31:15 myhost kernel: NET: Registered protocol family 1
Mar  8 23:31:15 myhost kernel: Unpacking initramfs...
Mar  8 23:31:15 myhost kernel: Freeing initrd memory: 1685k freed
Mar  8 23:31:15 myhost kernel: PCI-DMA: Disabling AGP.
Mar  8 23:31:15 myhost kernel: PCI-DMA: aperture base @ 20000000 size 65536 KB
Mar  8 23:31:15 myhost kernel: PCI-DMA: using GART IOMMU.
Mar  8 23:31:15 myhost kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Mar  8 23:31:15 myhost kernel: Scanning for low memory corruption every 60 seconds
Mar  8 23:31:15 myhost kernel: audit: initializing netlink socket (disabled)
Mar  8 23:31:15 myhost kernel: type=2000 audit(1268091061.563:1): initialized
Mar  8 23:31:15 myhost kernel: VFS: Disk quotas dquot_6.5.2
Mar  8 23:31:15 myhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Mar  8 23:31:15 myhost kernel: msgmni has been set to 7916
Mar  8 23:31:15 myhost kernel: alg: No test for stdrng (krng)
Mar  8 23:31:15 myhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Mar  8 23:31:15 myhost kernel: io scheduler noop registered
Mar  8 23:31:15 myhost kernel: io scheduler anticipatory registered
Mar  8 23:31:15 myhost kernel: io scheduler deadline registered
Mar  8 23:31:15 myhost kernel: io scheduler cfq registered (default)
Mar  8 23:31:15 myhost kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 2560k, total 16384k
Mar  8 23:31:15 myhost kernel: vesafb: mode is 1280x1024x8, linelength=1280, pages=11
Mar  8 23:31:15 myhost kernel: vesafb: scrolling: redraw
Mar  8 23:31:15 myhost kernel: vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Mar  8 23:31:15 myhost kernel: Console: switching to colour frame buffer device 160x64
Mar  8 23:31:15 myhost kernel: fb0: VESA VGA frame buffer device
Mar  8 23:31:15 myhost kernel: Linux agpgart interface v0.103
Mar  8 23:31:15 myhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mar  8 23:31:15 myhost kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Mar  8 23:31:15 myhost kernel: PNP: No PS/2 controller found. Probing ports directly.
Mar  8 23:31:15 myhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  8 23:31:15 myhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  8 23:31:15 myhost kernel: mice: PS/2 mouse device common for all mice
Mar  8 23:31:15 myhost kernel: cpuidle: using governor ladder
Mar  8 23:31:15 myhost kernel: cpuidle: using governor menu
Mar  8 23:31:15 myhost kernel: TCP cubic registered
Mar  8 23:31:15 myhost kernel: NET: Registered protocol family 17
Mar  8 23:31:15 myhost kernel: registered taskstats version 1
Mar  8 23:31:15 myhost kernel: Initalizing network drop monitor service
Mar  8 23:31:15 myhost kernel: Freeing unused kernel memory: 472k freed
Mar  8 23:31:15 myhost kernel: SCSI subsystem initialized
Mar  8 23:31:15 myhost kernel: ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Mar  8 23:31:15 myhost kernel: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Mar  8 23:31:15 myhost kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
Mar  8 23:31:15 myhost kernel: scsi0 : ahci
Mar  8 23:31:15 myhost kernel: scsi1 : ahci
Mar  8 23:31:15 myhost kernel: scsi2 : ahci
Mar  8 23:31:15 myhost kernel: scsi3 : ahci
Mar  8 23:31:15 myhost kernel: scsi4 : ahci
Mar  8 23:31:15 myhost kernel: scsi5 : ahci
Mar  8 23:31:15 myhost kernel: ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
Mar  8 23:31:15 myhost kernel: ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
Mar  8 23:31:15 myhost kernel: ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
Mar  8 23:31:15 myhost kernel: ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
Mar  8 23:31:15 myhost kernel: ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
Mar  8 23:31:15 myhost kernel: ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
Mar  8 23:31:15 myhost kernel: ata4: SATA link down (SStatus 0 SControl 300)
Mar  8 23:31:15 myhost kernel: ata3: SATA link down (SStatus 0 SControl 300)
Mar  8 23:31:15 myhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Mar  8 23:31:15 myhost kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  8 23:31:15 myhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  8 23:31:15 myhost kernel: ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
Mar  8 23:31:15 myhost kernel: ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Mar  8 23:31:15 myhost kernel: ata1.00: configured for UDMA/133
Mar  8 23:31:15 myhost kernel: scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502HJ  1AJ1 PQ: 0 ANSI: 5
Mar  8 23:31:15 myhost kernel: ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
Mar  8 23:31:15 myhost kernel: ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
Mar  8 23:31:15 myhost kernel: ata2.00: configured for UDMA/133
Mar  8 23:31:15 myhost kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5
Mar  8 23:31:15 myhost kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar  8 23:31:15 myhost kernel: ata6.00: ATAPI: PIONEER DVD-RW  DVR-212, 1.21, max UDMA/66
Mar  8 23:31:15 myhost kernel: ata6.00: configured for UDMA/66
Mar  8 23:31:15 myhost kernel: scsi 5:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-212  1.21 PQ: 0 ANSI: 5
Mar  8 23:31:15 myhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Mar  8 23:31:15 myhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Mar  8 23:31:15 myhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  8 23:31:15 myhost kernel: sda:
Mar  8 23:31:15 myhost kernel: sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Mar  8 23:31:15 myhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
Mar  8 23:31:15 myhost kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  8 23:31:15 myhost kernel: sdb: sda1 sda2 sda3 < sda5 sdb1 sdb2
Mar  8 23:31:15 myhost kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Mar  8 23:31:15 myhost kernel: sda6 sda7 >
Mar  8 23:31:15 myhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Mar  8 23:31:15 myhost kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode
Mar  8 23:31:15 myhost kernel: rtc_cmos 00:05: RTC can wake from S4
Mar  8 23:31:15 myhost kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Mar  8 23:31:15 myhost kernel: rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Mar  8 23:31:15 myhost kernel: udev: starting version 151
Mar  8 23:31:15 myhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Mar  8 23:31:15 myhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  8 23:31:15 myhost kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Mar  8 23:31:15 myhost kernel: scsi 5:0:0:0: Attached scsi generic sg2 type 5
Mar  8 23:31:15 myhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Mar  8 23:31:15 myhost kernel: r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: eth0: RTL8168c/8111c at 0xffffc900100f4000, 00:24:1d:7f:f4:27, XID 1c4000c0 IRQ 27
Mar  8 23:31:15 myhost kernel: sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Mar  8 23:31:15 myhost kernel: Uniform CD-ROM driver Revision: 3.20
Mar  8 23:31:15 myhost kernel: Uniform Multi-Platform E-IDE driver
Mar  8 23:31:15 myhost kernel: atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
Mar  8 23:31:15 myhost kernel: ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar  8 23:31:15 myhost kernel: atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
Mar  8 23:31:15 myhost kernel: ide0: BM-DMA at 0xfa00-0xfa07
Mar  8 23:31:15 myhost kernel: atiixp 0000:00:14.1: simplex device: DMA disabled
Mar  8 23:31:15 myhost kernel: ide1: DMA disabled
Mar  8 23:31:15 myhost kernel: EDAC MC: Ver: 2.1.0 Feb 23 2010
Mar  8 23:31:15 myhost kernel: EDAC amd64_edac:  Ver: 3.2.0 Feb 23 2010
Mar  8 23:31:15 myhost kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Mar  8 23:31:15 myhost kernel: Disabling lock debugging due to kernel taint
Mar  8 23:31:15 myhost kernel: [fglrx] Maximum main memory to use for locked dma buffers: 3796 MBytes.
Mar  8 23:31:15 myhost kernel: [fglrx]   vendor: 1002 device: 9442 count: 1
Mar  8 23:31:15 myhost kernel: [fglrx] ioport: bar 4, base 0xee00, size: 0x100
Mar  8 23:31:15 myhost kernel: pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: [fglrx] Kernel PAT support is enabled
Mar  8 23:31:15 myhost kernel: [fglrx] module loaded - fglrx 8.69.4 [Dec 11 2009] with 1 minors
Mar  8 23:31:15 myhost kernel: processor LNXCPU:00: registered as cooling_device0
Mar  8 23:31:15 myhost kernel: processor LNXCPU:01: registered as cooling_device1
Mar  8 23:31:15 myhost kernel: processor LNXCPU:02: registered as cooling_device2
Mar  8 23:31:15 myhost kernel: processor LNXCPU:03: registered as cooling_device3
Mar  8 23:31:15 myhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Mar  8 23:31:15 myhost kernel: ACPI: Power Button [PWRB]
Mar  8 23:31:15 myhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Mar  8 23:31:15 myhost kernel: ACPI: Power Button [PWRF]
Mar  8 23:31:15 myhost kernel: usbcore: registered new interface driver usbfs
Mar  8 23:31:15 myhost kernel: usbcore: registered new interface driver hub
Mar  8 23:31:15 myhost kernel: usbcore: registered new device driver usb
Mar  8 23:31:15 myhost kernel: Linux video capture interface: v2.00
Mar  8 23:31:15 myhost kernel: saa7130/34: v4l2 driver version 0.2.15 loaded
Mar  8 23:31:15 myhost kernel: saa7134 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Mar  8 23:31:15 myhost kernel: saa7134[0]: found at 0000:03:07.0, rev: 1, irq: 21, latency: 32, mmio: 0xfddff000
Mar  8 23:31:15 myhost kernel: saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,autodetected]
Mar  8 23:31:15 myhost kernel: saa7134[0]: board init: gpio is 50000
Mar  8 23:31:15 myhost kernel: input: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:14.4/0000:03:07.0/input/input4
Mar  8 23:31:15 myhost kernel: IRQ 21/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Mar  8 23:31:15 myhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar  8 23:31:15 myhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Mar  8 23:31:15 myhost kernel: i2c i2c-0: Invalid 7-bit address 0x7a
Mar  8 23:31:15 myhost kernel: All bytes are equal. It is not a TEA5767
Mar  8 23:31:15 myhost kernel: tuner 0-0060: chip found @ 0xc0 (saa7134[0])
Mar  8 23:31:15 myhost kernel: tuner-simple 0-0060: creating new instance
Mar  8 23:31:15 myhost kernel: tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
Mar  8 23:31:15 myhost kernel: saa7134[0]: registered device video0 [v4l2]
Mar  8 23:31:15 myhost kernel: saa7134[0]: registered device vbi0
Mar  8 23:31:15 myhost kernel: EMU10K1_Audigy 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Mar  8 23:31:15 myhost kernel: Audigy2 value: Special config.
Mar  8 23:31:15 myhost kernel: ide1: no devices on the port
Mar  8 23:31:15 myhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar  8 23:31:15 myhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Mar  8 23:31:15 myhost kernel: EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
Mar  8 23:31:15 myhost kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Mar  8 23:31:15 myhost kernel: Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Mar  8 23:31:15 myhost kernel: (Note that use of the override may cause unknown side effects.)
Mar  8 23:31:15 myhost kernel: amd64_edac: probe of 0000:00:18.2 failed with error -22
Mar  8 23:31:15 myhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: EHCI Host Controller
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: debug port 1
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Mar  8 23:31:15 myhost kernel: usb usb1: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 1-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 1-0:1.0: 6 ports detected
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.0: OHCI Host Controller
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
Mar  8 23:31:15 myhost kernel: saa7134 ALSA driver for DMA sound loaded
Mar  8 23:31:15 myhost kernel: IRQ 21/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Mar  8 23:31:15 myhost kernel: saa7134[0]/alsa: saa7134[0] at 0xfddff000 irq 21 registered as card -1
Mar  8 23:31:15 myhost kernel: usb usb2: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 2-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 2-0:1.0: 3 ports detected
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: EHCI Host Controller
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: debug port 1
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
Mar  8 23:31:15 myhost kernel: ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
Mar  8 23:31:15 myhost kernel: usb usb3: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 3-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 3-0:1.0: 6 ports detected
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.1: OHCI Host Controller
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
Mar  8 23:31:15 myhost kernel: usb usb4: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 4-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 4-0:1.0: 3 ports detected
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
Mar  8 23:31:15 myhost kernel: usb usb5: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 5-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 5-0:1.0: 3 ports detected
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
Mar  8 23:31:15 myhost kernel: usb usb6: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 6-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 6-0:1.0: 3 ports detected
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:14.5: OHCI Host Controller
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
Mar  8 23:31:15 myhost kernel: ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
Mar  8 23:31:15 myhost kernel: usb usb7: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 7-0:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 7-0:1.0: 2 ports detected
Mar  8 23:31:15 myhost kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Mar  8 23:31:15 myhost kernel: usb 1-1: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: hub 1-1:1.0: USB hub found
Mar  8 23:31:15 myhost kernel: hub 1-1:1.0: 4 ports detected
Mar  8 23:31:15 myhost kernel: usb 5-3: new low speed USB device using ohci_hcd and address 2
Mar  8 23:31:15 myhost kernel: CE: hpet increasing min_delta_ns to 15000 nsec
Mar  8 23:31:15 myhost kernel: usb 5-3: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: usbcore: registered new interface driver hiddev
Mar  8 23:31:15 myhost kernel: input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input5
Mar  8 23:31:15 myhost kernel: generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-3/input0
Mar  8 23:31:15 myhost kernel: usbcore: registered new interface driver usbhid
Mar  8 23:31:15 myhost kernel: usbhid: v2.6:USB HID core driver
Mar  8 23:31:15 myhost kernel: usb 6-1: new low speed USB device using ohci_hcd and address 2
Mar  8 23:31:15 myhost kernel: usb 6-1: configuration #1 chosen from 1 choice
Mar  8 23:31:15 myhost kernel: input: HID 046a:0021 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input6
Mar  8 23:31:15 myhost kernel: generic-usb 0003:046A:0021.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:13.1-1/input0
Mar  8 23:31:15 myhost kernel: input: HID 046a:0021 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input7
Mar  8 23:31:15 myhost kernel: generic-usb 0003:046A:0021.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:13.1-1/input1
Mar  8 23:31:15 myhost kernel: EXT4-fs (sda5): mounted filesystem with ordered data mode
Mar  8 23:31:15 myhost kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode
Mar  8 23:31:15 myhost kernel: Adding 2096440k swap on /dev/sda7.  Priority:-1 extents:1 across:2096440k 
Mar  8 23:31:15 myhost kernel: r8169: eth0: link up
Mar  8 23:31:15 myhost kernel: r8169: eth0: link up
Mar  8 23:31:15 myhost dnsmasq[4392]: started, version 2.52 cachesize 150
Mar  8 23:31:15 myhost dnsmasq[4392]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Mar  8 23:31:15 myhost dnsmasq[4392]: reading /etc/resolv.conf
Mar  8 23:31:15 myhost dnsmasq[4392]: using nameserver 192.168.1.1#53
Mar  8 23:31:15 myhost dnsmasq[4392]: read /etc/hosts - 1 addresses
Mar  8 23:31:15 myhost acpid: starting up
Mar  8 23:31:15 myhost acpid: 3 rules loaded
Mar  8 23:31:15 myhost acpid: waiting for events: event logging is off
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001022d00001201sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001022d00001203sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001022d00001204sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001002d0000439Dsv00001002sd0000439Dbc06sc01i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001022d00001200sv00000000sd00000000bc06sc00i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'dmi:bvnAwardSoftwareInternational,Inc.:bvrF5:bd09/16/2009:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA790X-UD3P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA790X-UD3P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001002d00004384sv00000000sd00000000bc06sc04i01' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'pci:v00001002d00005958sv00001002sd00005958bc06sc00i00' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:LNXSYBUS:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:LNXSYBUS:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0103:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: 'acpi:device:' is not a valid module or alias name
Mar  8 23:31:05 myhost load-modules.sh: Not loading module 'snd_hda_intel' for alias 'pci:v00001002d0000AA30sv00001002sd0000AA30bc04sc03i00' because it is blacklisted
Mar  8 23:31:05 myhost load-modules.sh: Not loading module 'snd_hda_intel' for alias 'pci:v00001002d0000AA30sv00001002sd0000AA30bc04sc03i00' because it is blacklisted
Mar  8 23:31:15 myhost init: Entering runlevel: 3
Mar  8 23:31:27 myhost acpid: client connected from 4493[82:82]
Mar  8 23:31:27 myhost acpid: 1 client rule loaded
Mar  8 23:31:29 myhost kernel: it87: Found IT8720F chip at 0x228, revision 8
Mar  8 23:31:29 myhost kernel: it87: in3 is VCC (+5V)
Mar  8 23:31:29 myhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Mar  8 23:31:29 myhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Mar  8 23:31:29 myhost kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Mar  8 23:31:29 myhost kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Mar  8 23:31:29 myhost kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Mar  8 23:31:35 myhost acpid: client connected from 4717[0:0]
Mar  8 23:31:35 myhost acpid: 1 client rule loaded
Mar  8 23:31:35 myhost kernel: [fglrx] Firegl kernel thread PID: 4719
Mar  8 23:31:36 myhost kernel: [fglrx] Gart USWC size:1235 M.
Mar  8 23:31:36 myhost kernel: [fglrx] Gart cacheable size:490 M.
Mar  8 23:31:36 myhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000 
Mar  8 23:31:36 myhost kernel: [fglrx] Reserved FB block: Unshared offset:fc21000, size:3df000 
Mar  8 23:31:36 myhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
Mar  8 23:31:53 myhost kernel: fuse init (API version 7.13)
Mar  8 23:32:54 myhost ntpd[4697]: adjusting local clock by -0.181989s

So at the moment iam running Arch without acpi but that cant be long term solution...

uwinkelvos · 2010-03-09 04:42:19

This is realy interesting! I have got the same problems, not just for a few weeks, but for over a year. Had these problems on ubuntu before i startzed using arch. I can live with these issues, as the system is absolutly stable when it has booted. Sometimes i get this have-to-press-any-key error in the shutdown phase, though.

I got a Phenom II x3 720, GA-MA790XT-UD4P (AMD 790X + SB750 Chipset) and a NVIDIA Geforce GTX 260. You don't happen to have the same mainboard?

Anril · 2010-03-09 07:54:02

I have Gigabyte GA-MA790X-UD3P motherboard. It might be bug related to specific motherboard but i doubt it. I have to do that press-any-key during boot and shutdown to make it finish and many times more then just once or twice.

uwinkelvos · 2010-03-11 05:39:42

i noticed that not using the front usb connectors, but the rear ones, slightly improves the press-any-key problem. nevertheless these both problems realy might be a gigabyte bios thing. maybe we should report this this to the kernel team.

Namarrgon · 2010-03-17 15:25:54

Hi, folks!

I might have the same problem even though the symptoms differ slightly.

My box freezes while the kernel is booting up and the only "solution" i found so far was to disable acpi.
Now, the second coincidence is that I'm using a Gigabyte GA-MA790X-UD4 aswell.

Don't nail me down on it but I think it all started around the time when the upgrade to kernel 2.6.32 was released. Since then the problem was coming and going with each subsequent update. I didn't bother with finding the root of this problem since i simply forgot about the acpi=off-hack.

Anyway, I'm gonna have a look into it and post it if i come up with something.

alex

Last edited by Namarrgon (2010-03-17 15:26:51)

Anril · 2010-03-25 13:51:46

Found the problem:

Try to tun off CPU C1E support in bios.

That did the trick for me...

enyaw_ecurb · 2010-03-27 23:56:03

Have a GA-MA770T-UD3P. Had the same problems.

Turning C1E off in bios worked. Thanks for that!

A little bit of research in the kernel-mailinglist showed that this so-called feature C1E has been quite the troublemaker. But whatever, it works...

Namarrgon · 2010-04-04 22:24:28

Anril wrote:

Found the problem:
Try to tun off CPU C1E support in bios.
That did the trick for me...

Cheers mate! That worked for me as well.

alex

bhanuvrat · 2010-04-05 08:30:19

Hello folks, I have been living with the same problem for over 3 months now. The only solution being acpi=off, but doing that deprives me of the battery meter on the graphical desktop environments. I wandered from forum to forum for solution but couldn't get any:

http://www.linuxquestions.org/questions … ms-786824/

http://www.linuxquestions.org/questions … 14-782312/

Just when I thought that I had found a solution, I am again finding myself at the same state. I somehow figured that compiling a kernel with acpi built into it instead of being loaded while booting as a module would solve the problem. Eventually I found that opensuse did start working particularly well without turning acpi=off ( and I got very happy and screwed something up with the graphics driver eventually ... and uninstalled it).

Now with Arch Linux I am facing a fairly random behavior. I mean that if I do not set acpi=off, ( irrespective of whether I am using modular version of acpi or the hard coded one) sometime it would boot fine and sometime it would freeze. And after multiple reboots again it would start working fine.

What I am not able to understand is how can a computer program behave randomly? Either there is an uninitialized variable somewhere or my Dell Studio 1450 has some kind of advanced Artificial Intelligence which it is using to drive me completely crazy.

please help me out too guys ... phuleeeezzzzz

agaida · 2010-05-15 20:15:22

bhanuvrat wrote:

Hello folks, I have been living with the same problem for over 3 months now. The only solution being acpi=off, but doing that deprives me of the battery meter on the graphical desktop environments. I wandered from forum to forum for solution but couldn't get any:
s ... phuleeeezzzzz

It's not the only solution. Try nolapic_timer instead of acpi=off. This should fix the most of your problems. Have a look at my kernel line:
<code>Command line: BOOT_IMAGE=/vmlinuz26-ck root=/dev/disk/by-uuid/5a214de1-8afb-43a2-b63a-3ae4f2b993bb rootfstype=ext4 ro hpet=disable lapic nolapic_timer nopat pci=use_crs vga=794 nomodeset</code>

hpet.. should solve possible problems with vbox, lapic turns local apic on nolapic_timer disables the timer that causes your problems, nopat is a sability hack for ATI cards the rest is by the way..

hope this will help.

Alf

bhanuvrat · 2010-05-16 11:20:41

@agaida

tried that ............ didn't work

agaida · 2010-05-16 14:09:44

@bhanuvrat
please post the dmesg.log

bhanuvrat · 2010-05-16 14:10:49

with or without the pci=noacpi that I use to boot into linux?

agaida · 2010-05-16 14:32:30

with nolapic_timer i mean ... nolapic_timer... not pci=nolapic_timer, not any other apci related stuff

bhanuvrat · 2010-05-17 10:16:16

here is the dmesg with nolapic_timer

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.5-127.fc12.i686.PAE (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable)
 BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved)
 BIOS-e820: 00000000bdaa7000 - 00000000bdbd0000 (usable)
 BIOS-e820: 00000000bdbd0000 - 00000000bdc0f000 (reserved)
 BIOS-e820: 00000000bdc0f000 - 00000000bdd09000 (usable)
 BIOS-e820: 00000000bdd09000 - 00000000bdf0f000 (reserved)
 BIOS-e820: 00000000bdf0f000 - 00000000bdf18000 (usable)
 BIOS-e820: 00000000bdf18000 - 00000000bdf1f000 (reserved)
 BIOS-e820: 00000000bdf1f000 - 00000000bdf63000 (usable)
 BIOS-e820: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS)
 BIOS-e820: 00000000bdf9f000 - 00000000bdfe2000 (usable)
 BIOS-e820: 00000000bdfe2000 - 00000000bdfff000 (ACPI data)
 BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 100000000 mask FC0000000 write-back
  3 base 0FFE00000 mask FFFE00000 write-protect
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
reg 3, base: 4094MB, range: 2MB, type WP
total RAM coverred: 4096M
Found optimal setting for mtrr clean up
 gran_size: 64K     chunk_size: 64K     num_reg: 3      lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
 0000000000 - 0000200000 page 4k
 0000200000 - 0037400000 page 2M
 0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 7000-f000
RAMDISK: 37534000 - 37fef7b4
Allocated new RAMDISK: 00afb000 - 015b67b4
Move RAMDISK from 0000000037534000 - 0000000037fef7b3 to 00afb000 - 015b67b3
ACPI: RSDP 000f74e0 00024 (v02 DELL  )
ACPI: XSDT bdff5d60 00074 (v01 DELL    FX09    06040000  LTP 00000000)
ACPI: FACP bdfe6000 000F4 (v03 DELL   M09      06040000 ALAN 00000001)
ACPI: DSDT bdfe7000 08DB2 (v02 DELL   M09      06040000 INTL 20050624)
ACPI: FACS bdf9efc0 00040
ACPI: HPET bdffed16 00038 (v01 DELL   M09      06040000 LOHR 0000005A)
ACPI: MCFG bdffed4e 0003C (v01 DELL   M09      06040000 LOHR 0000005A)
ACPI: APIC bdffed8a 00068 (v01 DELL   M09      06040000  LTP 00000000)
ACPI: BOOT bdffedf2 00028 (v01 DELL   M09      06040000  LTP 00000001)
ACPI: OSFR bdffee1a 00070 (v01 DELL   DELL     06040000 ASL  00000061)
ACPI: SLIC bdffee8a 00176 (v01 DELL    FX09    06040000  LTP 00000000)
ACPI: SSDT bdfe5000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT bdfe4000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT bdfe3000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
4234MB HIGHMEM available.
885MB LOWMEM available.
  mapped low ram: 0 - 375fe000
  low ram: 0 - 375fe000
  node 0 low ram: 00000000 - 375fe000
  node 0 bootmap 0000b000 - 00011ec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000af1210]    TEXT DATA BSS ==> [0000400000 - 0000af1210]
  #4 [000009d400 - 0000100000]    BIOS reserved ==> [000009d400 - 0000100000]
  #5 [0000af2000 - 0000afa11c]              BRK ==> [0000af2000 - 0000afa11c]
  #6 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
  #7 [0000afb000 - 00015b67b4]      NEW RAMDISK ==> [0000afb000 - 00015b67b4]
  #8 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
found SMP MP-table at [c00f7590] f7590
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000375fe
  HighMem  0x000375fe -> 0x00140000
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
    0: 0x00000000 -> 0x0000009d
    0: 0x00000100 -> 0x000bdaa1
    0: 0x000bdaa7 -> 0x000bdbd0
    0: 0x000bdc0f -> 0x000bdd09
    0: 0x000bdf0f -> 0x000bdf18
    0: 0x000bdf1f -> 0x000bdf63
    0: 0x000bdf9f -> 0x000bdfe2
    0: 0x000bdfff -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1039602
free_area_init_node: node 0, pgdat c0995ba0, node_mem_map c15b7000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3965 pages, LIFO batch:0
  Normal zone: 1740 pages used for memmap
  Normal zone: 220978 pages, LIFO batch:31
  HighMem zone: 8469 pages used for memmap
  HighMem zone: 804418 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at be000000 (gap: be000000:42000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages at c3dc7000, static data 37788 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029361
Kernel command line: ro root=UUID=bb4672b1-6bad-4b9b-bad1-7fce8610ec39 nolapic_timer  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 26214400 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:00140000)
Memory: 4071840k/5242880k available (3569k kernel code, 85720k reserved, 2214k data, 448k init, 3251548k highmem)
virtual kernel memory layout:
    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc09a7000 - 0xc0a17000   ( 448 kB)
      .data : 0xc077c76f - 0xc09a6028   (2214 kB)
      .text : 0xc0400000 - 0xc077c76f   (3569 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2260.970 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.94 BogoMIPS (lpj=2260970)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version:                 2
... bit width:               40
... generic counters:        2
... value mask:              000000ffffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  3
... counter mask:            0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20611 entries in 41 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz stepping 0a
Disabling APIC timer
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4521.95 BogoMIPS (lpj=2260979)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P7550  @ 2.26GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9043.89 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 15:36:47  Date: 05/17/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xfddf2, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
DMAR: Forcing write-buffer flush capability
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc304800-0xfc304bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc304c00-0xfc304fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc304000-0xfc3047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:05: ioport range 0x910-0x917 has been reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0x900-0x903 has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x1180-0x11ff has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
pci 0000:00:1c.2:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
pci_bus 0000:06: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
 lapic is not functional.
Could not switch to high resolution mode on CPU 0
Freeing initrd memory: 10989k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1274110607.528:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1625
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
ACPI: SSDT bdf1ac20 002A9 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT bdf18620 005C5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
ACPI: SSDT bdf19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT bdf19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device3
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (75 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 28
ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304380 irq 28
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc304800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc304c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 10:442:639
rtc_cmos 00:06: setting system clock to 2010-05-17 15:36:48 UTC (1274110608)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI: Battery Slot [BAT1] (battery present)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-6: new high speed USB device using ehci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9500420ASG, 0004SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9500420ASG     0004 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10
usb 1-6: New USB device found, idVendor=0c45, idProduct=6407
usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-6: Product: Laptop_Integrated_Webcam_2M
usb 1-6: Manufacturer: CN0T821N7248797L01GE
usb 1-6: configuration #1 chosen from 1 choice
 sda11 sda12 >
sd 0:0:0:0: [sda] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: Optiarc DVD+/-RW AD-7640S, HD18, max UDMA/100, ATAPI AN
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640S HD18 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 448k freed
Write protecting the kernel text: 3572k
Write protecting the kernel read-only data: 1716k
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
usb 8-2: new full speed USB device using uhci_hcd and address 2
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFC000000
[drm] register mmio size: 65536
ATOM BIOS: BR34026
[drm] Clocks initialized !
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 416288 kiB.
[TTM] Zone highmem: Available graphics memory: 2042062 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RV710 CP Microcode
platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   LVDS
[drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[drm]   Encoders:
[drm]     LCD1: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   HDMI-A
[drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
usb 8-2: New USB device found, idVendor=12d1, idProduct=140b
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 8-2: Product: HUAWEI Mobile
usb 8-2: Manufacturer: HUAÿWEI TECHNOLOGIES
usb 8-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
usb 8-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 5760000
[drm] fb depth is 24
[drm]    pitch is 6400
fbcon: radeondrmfb (fb0) is primary device
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
executing set pll
executing set crtc timing
[drm] LVDS-11: set mode 1600x900 1c
Console: switching to colour frame buffer device 200x56
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
ACPI Error: Current brightness invalid 20090521 video-538
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
ACPI: Video Device [ATID] (multi-head: yes  rom: no  post: no)
EXT4-fs (sda7): barriers enabled
kjournald2 starting: pid 291, dev sda7:8, commit interval 5 seconds
EXT4-fs (sda7): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda7): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda7
dracut: Loading SELinux policy
type=1404 audit(1274110613.259:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux:  8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
SELinux:  75 classes, 144734 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda7, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1274110613.566:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
usb-storage: device scan complete
scsi 9:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 0
scsi 9:0:0:1: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
sr1: scsi-1 drive
sr 9:0:0:0: Attached scsi CD-ROM sr1
sr 9:0:0:0: Attached scsi generic sg2 type 5
sd 9:0:0:1: Attached scsi generic sg3 type 0
sd 9:0:0:1: [sdb] Attached SCSI removable disk
udev: starting version 145
ACPI: WMI: Mapper loaded
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
type=1400 audit(1274090818.429:4): avc:  denied  { mmap_zero } for  pid=392 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
tg3.c:v3.99 (April 20, 2009)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: wake-up capability disabled by ACPI
tg3 0000:02:00.0: PME# disabled
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 8-2:1.0: GSM modem (1-port) converter detected
usb 8-2: GSM modem (1-port) converter now attached to ttyUSB0
option 8-2:1.1: GSM modem (1-port) converter detected
usb 8-2: GSM modem (1-port) converter now attached to ttyUSB1
option 8-2:1.2: GSM modem (1-port) converter detected
usb 8-2: GSM modem (1-port) converter now attached to ttyUSB2
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:24:e8:81:df:48
eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6407)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:06:00.0: setting latency timer to 64
iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:06:00.0: irq 29 for MSI/MSI-X
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: Calling CRDA for country: IN
cfg80211: Regulatory domain changed to country: IN
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 2000 mBm)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC665: SKU not ready 0x00000000.
hda_codec: ALC665: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 31 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (sda7): internal journal on sda7:8
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 886, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): mounted filesystem with ordered data mode
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs (sda6): barriers enabled
kjournald2 starting: pid 887, dev sda6:8, commit interval 5 seconds
EXT4-fs (sda6): internal journal on sda6:8
EXT4-fs (sda6): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda6): mounted filesystem with ordered data mode
SELinux: initialized (dev sda6, type ext4), uses xattr
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
tg3 0000:02:00.0: wake-up capability disabled by ACPI
tg3 0000:02:00.0: PME# disabled
tg3 0000:02:00.0: irq 32 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: BCM2046B1
usb 4-1: Manufacturer: Broadcom
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using uhci_hcd and address 3
usb 4-1.1: New USB device found, idVendor=413c, idProduct=8161
usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-1.1: configuration #1 chosen from 1 choice
input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input9
generic-usb 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.1-1.1/input0
usb 4-1.2: new full speed USB device using uhci_hcd and address 4
usb 4-1.2: New USB device found, idVendor=413c, idProduct=8162
usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input10
generic-usb 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.1-1.2/input0

agaida · 2010-05-17 13:13:00

OK, the bootprocess looks ok so far. Eventually i have a few suggestions: Dont use such an old kernel. Dont use an fedora kernel. Use a x86_64 Kernel. Why have vou turn SELinux on?

Old kernel: You use 31.5. Use kernel26-pae from AUR. Its not outdated... If you need special Settings for your Notebook, you should use y86-64, kernel26-ck or so.
If you not need the last byte, you should use kernel26-ck or so for i686 instead of -pae (its about 500 M, so who cares)
SELinux: If you know exactly how to set it up and that you will urgently need it, use it, Otherwise drop SELinux because of the problems it can bring.

The problems you're runnig in happens to me too. Isn't about any distribution, its about the kernel. You should use a kernel before 31.5 or better use an actuel kernel like -ck with the boot option hpet=disabled and lapic nolapic_timer. This will leave lapic functional and fixes the problems with the timings. And please: Dont use SELinux.

bhanuvrat · 2010-05-17 13:22:51

well.. I had screwed up the arch installation a few weeks ago..

it says fedora kernel because its running fedora .. its not arch .. I will be restoring arch in a few days ..

the problem remains same irrespective of whichever distro I use. The screen goes blank during boot up .. right after acpi is loaded ..

NOTE : the system keeps running ...

while the display was blank I used a text terminal on my fedora machine ... to sign in and fired dmesg> temp .. and pasted the content the next time I booted up.

so now what do you say/

agaida · 2010-05-17 18:10:03

Ok, i was wondering about the fedora kernel. But, as you say, its nothing about the distro. But if you say, your terminal is working without a problem, i would prefer to start fedora in Runlevel 3 and then try it the arch way.

A possible simple solution is to try sudo chmod 1777 /etc/X11 -R. Then I think sudo Xorg -configure was worth a try.

cp /etc/X11/xorg.conf /etc/X11/xorg.conf.test
cp ~/xorg.conf.new /etc/X11/xorg.conf
chmod 777 /etc/X11/xorg.conf
startx

if you get an blank screen, try as follows. Deinstall graphic drivers and install the thumb vesa drivers.
then sudo Xorg -configure
cp ~/xorg.conf.new /etc/X11/xorg.conf
chmod 777 /etc/11/xorg.conf
startx

Last edited by agaida (2010-05-17 18:11:48)

bhanuvrat · 2010-05-17 18:22:26

well... you have not got my problem .. as Anril said

sometimes computer would freeze during boot at sata recognition part right before daemons gets started. It would also hang during boot at loading daemons but i could make it resume if i press any keyboard key and sometimes it would hang several times before i would get Xfce to fully load. I found out that its related to ACPI, since when i turn it off i dont get error messages about it in log files.

for a complete description of my problem please read my blog post about it ...

http://bhanuvrat.blog.co.in/2010/04/09/ … 50-laptop/

thanks for your responses.

Last edited by bhanuvrat (2010-05-17 20:13:14)

agaida · 2010-05-17 20:09:01

bhanuvrat wrote:

well... you have not got my problem .. as arnil said
sometimes computer would freeze during boot at sata recognition ...

You are right, only the apic part of it. The freezes sound like apic. Have you tried an external monitor on your Dell, i remember it some years before i had a few dells and hp's they change screen to external within booting... (about 6 or 8 years ago). I'm a lucky one, my Dell Studio 1737 has only the problems with the build in Graphics...

bhanuvrat · 2010-05-17 20:14:57

okay ... will try connecting it to the projector at college .. or some other monitor ...

bhanuvrat · 2010-05-18 05:56:26

oh yes .. you were right .. it does switch screen while booting .. thats why nothing is visible on the laptop screen.

so how do I make it switch back???

agaida · 2010-05-18 10:44:02

Dont know, have to read my journal from a few years ago.

agaida · 2010-05-18 12:04:15

I can imagine the your screen is currently working, but your backlights are off. Maybe it could help to turn them on. Are there any laptop modules? The other way to try: Get an Ubuntu live CD, the hacks are the same, because of the good hardware detection in ubuntu. It there are any missing modules, install them and smile...

bhanuvrat · 2010-05-18 12:13:37

no no .. its not about backlight .. the screen is really off... because ... in case it was only backlights something would have been visible (if I put the screen under light - it glistens ) .. but presently ... its just blank .. as if the computer was not switched on.

Arch Linux

#1 2010-03-08 23:03:58

Bug related to ACPI

#2 2010-03-09 04:42:19

Re: Bug related to ACPI

#3 2010-03-09 07:54:02

Re: Bug related to ACPI

#4 2010-03-11 05:39:42

Re: Bug related to ACPI

#5 2010-03-17 15:25:54

Re: Bug related to ACPI

#6 2010-03-25 13:51:46

Re: Bug related to ACPI

#7 2010-03-27 23:56:03

Re: Bug related to ACPI

#8 2010-04-04 22:24:28

Re: Bug related to ACPI

#9 2010-04-05 08:30:19

Re: Bug related to ACPI

#10 2010-05-15 20:15:22

Re: Bug related to ACPI

#11 2010-05-16 11:20:41

Re: Bug related to ACPI

#12 2010-05-16 14:09:44

Re: Bug related to ACPI

#13 2010-05-16 14:10:49

Re: Bug related to ACPI

#14 2010-05-16 14:32:30

Re: Bug related to ACPI

#15 2010-05-17 10:16:16

Re: Bug related to ACPI

#16 2010-05-17 13:13:00

Re: Bug related to ACPI

#17 2010-05-17 13:22:51

Re: Bug related to ACPI

#18 2010-05-17 18:10:03

Re: Bug related to ACPI

#19 2010-05-17 18:22:26

Re: Bug related to ACPI

#20 2010-05-17 20:09:01

Re: Bug related to ACPI

#21 2010-05-17 20:14:57

Re: Bug related to ACPI

#22 2010-05-18 05:56:26

Re: Bug related to ACPI

#23 2010-05-18 10:44:02

Re: Bug related to ACPI

#24 2010-05-18 12:04:15

Re: Bug related to ACPI

#25 2010-05-18 12:13:37

Re: Bug related to ACPI

Board footer