Arch Linux

hockeyfighter09

Member

Registered: 2009-07-04

Posts: 48

Monitor not getting right resolution

I just installed arch on my system and don't seem to be getting the right monitor resolution.  Right now the highest resolution I can get is 1600x1200 but my monitor supports 1920x1200.  I installed the ATI radeonhd open source drivers and my graphics card is the 5770, my monitor is a Dell U2410 if thats any help.  Below is my xorg.conf file.

 Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dri2"
    Load  "dbe"
    Load  "record"
    Load  "glx"
    Load  "dri"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier  "Card0"
    Driver      "vesa"
    VendorName  "ATI Technologies Inc"
    BoardName   "Juniper [Radeon HD 5700 Series]"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

evr

Arch Linux f@h Team Member

Registered: 2009-01-23

Posts: 554

Re: Monitor not getting right resolution

trying specifying your resolution using the "Modes" option under the "Screen" Section of your xorg.conf.
something like this.

hockeyfighter09

Member

Registered: 2009-07-04

Posts: 48

Re: Monitor not getting right resolution

trying specifying your resolution using the "Modes" option under the "Screen" Section of your xorg.conf.
something like this.

I tried that and it doesn't seem to be working.  Any other ideas?

EDIT: I am wondering if I put it in the right location.  I'll post my xorg.conf again with the resolution in place to see if it's in the right area.

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "dri2"
    Load  "dbe"
    Load  "record"
    Load  "glx"
    Load  "dri"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier  "Card0"
    Driver      "vesa"
    VendorName  "ATI Technologies Inc"
    BoardName   "Juniper [Radeon HD 5700 Series]"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
                Modes "1920x1200"
    EndSubSection
EndSection

Last edited by hockeyfighter09 (2010-04-02 05:12:05)