You are not logged in.
Pages: 1
I use KDE and have a HP ProBook 6560b with a dock/port replicator. My problem is that signal to my external monitor doesn't automatically work on login rather it be via VGA or DVI (currently hooked up over DVI). I tinkered around with it and got it to work sometimes but not consistently.
Edit: This also seems to happen in Gnome using Gnome's display config tool.
That aside, my even bigger issue is when I click KRandRTray down in the system tray and change the display settings to what I want, my external monitor goes to sleep and says "no signal." The settings I want are for my laptop's attached LCD panel (LVDS1) to be "Disabled" (since I keep my laptop lid closed in the dock) and I want my externally attached monitor (HDMI2) to be set to 1680x1050 (Auto). The even stranger part of this is I can eventually get this to work if I start it dual monitor, pick my secondary external monitor (HDMI2) and set it's resolution to 1680x1050 (Auto), set primary display to HDMI2, hit apply then go back in and set LVDS1 to "Disabled" and hit apply again.
To add to this, if at any point in time the external monitor goes to "no signal" mode and the settings restore after the countdown, the external monitor will never show signal until I drop out to a console and killall X and it restarts KDM, etc.
I don't have any Xorg.conf (or config files in /etc/X11/xorg.conf.d) that relates to video settings.
The following is my graphics card that is integrated into my Core i5:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)Also, the xf86-video-intel version:
xf86-video-intel 2.15.0-2This is the entire Xorg.0.log file up to the no signal situation on the external monitor:
[ 13.026]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 13.040] X Protocol Version 11, Revision 0
[ 13.040] Build Operating System: Linux 3.0-ARCH x86_64
[ 13.040] Current Operating System: Linux nathan-cbts 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 13.040] Kernel command line: root=/dev/mapper/vgroot-lvroot ro i915.modeset=1
[ 13.040] Build Date: 17 September 2011 07:42:58AM
[ 13.040]
[ 13.040] Current version of pixman: 0.22.2
[ 13.040] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.040] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 5 09:06:26 2011
[ 13.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.093] (==) Automatically adding devices
[ 13.093] (==) Automatically enabling devices
[ 13.131] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.131] Entry deleted from font path.
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.147] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.147] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.147] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.147] (II) Loader magic: 0x7d6160
[ 13.147] (II) Module ABI versions:
[ 13.147] X.Org ANSI C Emulation: 0.4
[ 13.147] X.Org Video Driver: 10.0
[ 13.147] X.Org XInput driver : 12.2
[ 13.147] X.Org Server Extension : 5.0
[ 13.148] (--) PCI:*(0:0:2:0) 8086:0116:103c:1619 rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 13.148] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.148] (II) LoadModule: "extmod"
[ 13.149] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.155] (II) Module extmod: vendor="X.Org Foundation"
[ 13.155] compiled for 1.10.4, module version = 1.0.0
[ 13.155] Module class: X.Org Server Extension
[ 13.155] ABI class: X.Org Server Extension, version 5.0
[ 13.155] (II) Loading extension MIT-SCREEN-SAVER
[ 13.155] (II) Loading extension XFree86-VidModeExtension
[ 13.155] (II) Loading extension XFree86-DGA
[ 13.155] (II) Loading extension DPMS
[ 13.155] (II) Loading extension XVideo
[ 13.155] (II) Loading extension XVideo-MotionCompensation
[ 13.155] (II) Loading extension X-Resource
[ 13.155] (II) LoadModule: "dbe"
[ 13.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.156] (II) Module dbe: vendor="X.Org Foundation"
[ 13.156] compiled for 1.10.4, module version = 1.0.0
[ 13.156] Module class: X.Org Server Extension
[ 13.156] ABI class: X.Org Server Extension, version 5.0
[ 13.156] (II) Loading extension DOUBLE-BUFFER
[ 13.156] (II) LoadModule: "glx"
[ 13.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.160] (II) Module glx: vendor="X.Org Foundation"
[ 13.160] compiled for 1.10.4, module version = 1.0.0
[ 13.160] ABI class: X.Org Server Extension, version 5.0
[ 13.160] (==) AIGLX enabled
[ 13.160] (II) Loading extension GLX
[ 13.160] (II) LoadModule: "record"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.161] (II) Module record: vendor="X.Org Foundation"
[ 13.161] compiled for 1.10.4, module version = 1.13.0
[ 13.161] Module class: X.Org Server Extension
[ 13.161] ABI class: X.Org Server Extension, version 5.0
[ 13.161] (II) Loading extension RECORD
[ 13.161] (II) LoadModule: "dri"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.172] (II) Module dri: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.0.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension XFree86-DRI
[ 13.172] (II) LoadModule: "dri2"
[ 13.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.172] (II) Module dri2: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.2.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension DRI2
[ 13.172] (==) Matched intel as autoconfigured driver 0
[ 13.172] (==) Matched vesa as autoconfigured driver 1
[ 13.172] (==) Matched fbdev as autoconfigured driver 2
[ 13.172] (==) Assigned the driver to the xf86ConfigLayout
[ 13.172] (II) LoadModule: "intel"
[ 13.177] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.187] (II) Module intel: vendor="X.Org Foundation"
[ 13.187] compiled for 1.10.2, module version = 2.15.0
[ 13.187] Module class: X.Org Video Driver
[ 13.187] ABI class: X.Org Video Driver, version 10.0
[ 13.187] (II) LoadModule: "vesa"
[ 13.187] (WW) Warning, couldn't open module vesa
[ 13.187] (II) UnloadModule: "vesa"
[ 13.187] (II) Unloading vesa
[ 13.187] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13.187] (II) LoadModule: "fbdev"
[ 13.187] (WW) Warning, couldn't open module fbdev
[ 13.187] (II) UnloadModule: "fbdev"
[ 13.187] (II) Unloading fbdev
[ 13.187] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13.187] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 13.187] (++) using VT number 7
[ 13.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: drmOpenMinor returns 8
[ 13.198] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 13.198] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.198] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.198] (==) intel(0): RGB weight 888
[ 13.198] (==) intel(0): Default visual is TrueColor
[ 13.198] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 13.198] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 13.198] (**) intel(0): Relaxed fencing enabled
[ 13.198] (**) intel(0): Framebuffer tiled
[ 13.198] (**) intel(0): Pixmaps tiled
[ 13.198] (**) intel(0): 3D buffers tiled
[ 13.198] (**) intel(0): SwapBuffers wait enabled
[ 13.198] (==) intel(0): video overlay key set to 0x101fe
[ 13.208] (II) intel(0): Output LVDS1 has no monitor section
[ 13.208] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 13.208] (II) intel(0): Output VGA1 has no monitor section
[ 13.231] (II) intel(0): Output HDMI1 has no monitor section
[ 13.270] (II) intel(0): Output DP1 has no monitor section
[ 13.395] (II) intel(0): Output HDMI2 has no monitor section
[ 13.418] (II) intel(0): Output HDMI3 has no monitor section
[ 13.456] (II) intel(0): Output DP2 has no monitor section
[ 13.496] (II) intel(0): Output DP3 has no monitor section
[ 13.496] (II) intel(0): EDID for output LVDS1
[ 13.496] (II) intel(0): Manufacturer: SEC Model: 4351 Serial#: 0
[ 13.496] (II) intel(0): Year: 2008 Week: 0
[ 13.496] (II) intel(0): EDID Version: 1.3
[ 13.496] (II) intel(0): Digital Display Input
[ 13.496] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 13.496] (II) intel(0): Gamma: 2.20
[ 13.496] (II) intel(0): No DPMS capabilities specified
[ 13.496] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.496] (II) intel(0): First detailed timing is preferred mode
[ 13.496] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 13.496] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 13.496] (II) intel(0): Manufacturer's mask: 0
[ 13.497] (II) intel(0): Supported detailed timing:
[ 13.497] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 13.497] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 13.497] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 13.497] (II) intel(0): Unknown vendor-specific block f
[ 13.497] (II) intel(0): SAMSUNG
[ 13.497] (II) intel(0): 156AT05-307
[ 13.497] (II) intel(0): EDID (in hex):
[ 13.497] (II) intel(0): 00ffffffffffff004ca3514300000000
[ 13.497] (II) intel(0): 00120103802213780a87f594574f8c27
[ 13.497] (II) intel(0): 27505400000001010101010101010101
[ 13.497] (II) intel(0): 010101010101121b567250000c303020
[ 13.497] (II) intel(0): 250058c2100000190000000f00000000
[ 13.497] (II) intel(0): 00000000001eb4027400000000fe0053
[ 13.497] (II) intel(0): 414d53554e470a2020202020000000fe
[ 13.497] (II) intel(0): 00313536415430352d3330370a200017
[ 13.497] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 13.497] (II) intel(0): Printing DDC gathered Modelines:
[ 13.497] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.497] (II) intel(0): Printing probed modes for output LVDS1
[ 13.497] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 13.497] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.497] (II) intel(0): EDID for output VGA1
[ 13.521] (II) intel(0): EDID for output HDMI1
[ 13.560] (II) intel(0): EDID for output DP1
[ 13.685] (II) intel(0): EDID for output HDMI2
[ 13.685] (II) intel(0): Manufacturer: HWP Model: 2848 Serial#: 16843009
[ 13.685] (II) intel(0): Year: 2011 Week: 24
[ 13.685] (II) intel(0): EDID Version: 1.3
[ 13.685] (II) intel(0): Digital Display Input
[ 13.685] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 13.685] (II) intel(0): Gamma: 2.20
[ 13.685] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 13.685] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.685] (II) intel(0): Default color space is primary color space
[ 13.685] (II) intel(0): First detailed timing is preferred mode
[ 13.685] (II) intel(0): redX: 0.641 redY: 0.335 greenX: 0.298 greenY: 0.611
[ 13.685] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.685] (II) intel(0): Supported established timings:
[ 13.685] (II) intel(0): 720x400@70Hz
[ 13.685] (II) intel(0): 640x480@60Hz
[ 13.685] (II) intel(0): 800x600@60Hz
[ 13.685] (II) intel(0): 1024x768@60Hz
[ 13.685] (II) intel(0): Manufacturer's mask: 0
[ 13.685] (II) intel(0): Supported standard timings:
[ 13.685] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.685] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.685] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 13.685] (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 13.685] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.685] (II) intel(0): Supported detailed timing:
[ 13.685] (II) intel(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 13.685] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 13.685] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 13.685] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 13.685] (II) intel(0): Monitor name: LA2205
[ 13.685] (II) intel(0): Serial No: 3CQ124N20C
[ 13.685] (II) intel(0): EDID (in hex):
[ 13.685] (II) intel(0): 00ffffffffffff0022f0482801010101
[ 13.685] (II) intel(0): 18150103802f1e78ee36c5a4554c9c25
[ 13.685] (II) intel(0): 125054a10800814081809500a940b300
[ 13.685] (II) intel(0): 01010101010121399030621a274068b0
[ 13.685] (II) intel(0): 3600d9281100001c000000fd00324c18
[ 13.685] (II) intel(0): 5311000a202020202020000000fc004c
[ 13.685] (II) intel(0): 41323230350a202020202020000000ff
[ 13.685] (II) intel(0): 003343513132344e3230430a202000d3
[ 13.685] (II) intel(0): Printing probed modes for output HDMI2
[ 13.685] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 13.685] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 13.685] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 13.685] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 13.685] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 13.685] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.685] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.685] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.685] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 13.709] (II) intel(0): EDID for output HDMI3
[ 13.746] (II) intel(0): EDID for output DP2
[ 13.786] (II) intel(0): EDID for output DP3
[ 13.786] (II) intel(0): Output LVDS1 connected
[ 13.786] (II) intel(0): Output VGA1 disconnected
[ 13.786] (II) intel(0): Output HDMI1 disconnected
[ 13.786] (II) intel(0): Output DP1 disconnected
[ 13.786] (II) intel(0): Output HDMI2 connected
[ 13.786] (II) intel(0): Output HDMI3 disconnected
[ 13.786] (II) intel(0): Output DP2 disconnected
[ 13.786] (II) intel(0): Output DP3 disconnected
[ 13.786] (II) intel(0): Using fuzzy aspect match for initial modes
[ 13.786] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 13.786] (II) intel(0): Output HDMI2 using initial mode 1024x768
[ 13.786] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.786] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.786] (**) intel(0): Display dimensions: (340, 190) mm
[ 13.786] (**) intel(0): DPI set to (76, 102)
[ 13.786] (II) Loading sub module "fb"
[ 13.786] (II) LoadModule: "fb"
[ 13.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.802] (II) Module fb: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.0.0
[ 13.802] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.802] (II) Loading sub module "dri2"
[ 13.802] (II) LoadModule: "dri2"
[ 13.802] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.802] (II) Module dri2: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.2.0
[ 13.802] ABI class: X.Org Server Extension, version 5.0
[ 13.802] (==) Depth 24 pixmap format is 32 bpp
[ 13.802] (II) intel(0): [DRI2] Setup complete
[ 13.802] (II) intel(0): [DRI2] DRI driver: i965
[ 13.802] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 13.805] (II) UXA(0): Driver registered support for the following operations:
[ 13.805] (II) solid
[ 13.805] (II) copy
[ 13.805] (II) composite (RENDER acceleration)
[ 13.805] (II) put_image
[ 13.805] (II) get_image
[ 13.805] (==) intel(0): Backing store disabled
[ 13.805] (==) intel(0): Silken mouse enabled
[ 13.805] (II) intel(0): Initializing HW Cursor
[ 14.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.400] (==) intel(0): DPMS enabled
[ 14.400] (==) intel(0): Intel XvMC decoder enabled
[ 14.400] (II) intel(0): Set up textured video
[ 14.400] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 14.400] (II) intel(0): direct rendering: DRI2 Enabled
[ 14.400] (==) intel(0): hotplug detection: "enabled"
[ 14.400] (--) RandR disabled
[ 14.400] (II) Initializing built-in extension Generic Event Extension
[ 14.400] (II) Initializing built-in extension SHAPE
[ 14.400] (II) Initializing built-in extension MIT-SHM
[ 14.400] (II) Initializing built-in extension XInputExtension
[ 14.400] (II) Initializing built-in extension XTEST
[ 14.400] (II) Initializing built-in extension BIG-REQUESTS
[ 14.400] (II) Initializing built-in extension SYNC
[ 14.400] (II) Initializing built-in extension XKEYBOARD
[ 14.400] (II) Initializing built-in extension XC-MISC
[ 14.400] (II) Initializing built-in extension SECURITY
[ 14.400] (II) Initializing built-in extension XINERAMA
[ 14.400] (II) Initializing built-in extension XFIXES
[ 14.400] (II) Initializing built-in extension RENDER
[ 14.400] (II) Initializing built-in extension RANDR
[ 14.400] (II) Initializing built-in extension COMPOSITE
[ 14.400] (II) Initializing built-in extension DAMAGE
[ 14.498] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.498] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.498] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.498] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 14.498] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.498] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 14.498] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.498] (II) intel(0): Setting screen physical size to 270 x 203
[ 14.799] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.799] (II) LoadModule: "evdev"
[ 14.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (II) Module evdev: vendor="X.Org Foundation"
[ 14.811] compiled for 1.10.0, module version = 2.6.0
[ 14.811] Module class: X.Org XInput Driver
[ 14.811] ABI class: X.Org XInput driver, version 12.2
[ 14.811] (II) Using input driver 'evdev' for 'Power Button'
[ 14.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (**) Power Button: always reports core events
[ 14.811] (**) Power Button: Device: "/dev/input/event3"
[ 14.811] (--) Power Button: Found keys
[ 14.811] (II) Power Button: Configuring as keyboard
[ 14.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.811] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 14.811] (**) Option "xkb_rules" "evdev"
[ 14.811] (**) Option "xkb_model" "evdev"
[ 14.811] (**) Option "xkb_layout" "us"
[ 14.829] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 14.829] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.829] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.829] (**) Video Bus: always reports core events
[ 14.829] (**) Video Bus: Device: "/dev/input/event4"
[ 14.829] (--) Video Bus: Found keys
[ 14.829] (II) Video Bus: Configuring as keyboard
[ 14.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 14.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 14.829] (**) Option "xkb_rules" "evdev"
[ 14.829] (**) Option "xkb_model" "evdev"
[ 14.829] (**) Option "xkb_layout" "us"
[ 14.832] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.832] (II) No input driver/identifier specified (ignoring)
[ 14.833] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.833] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.833] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.833] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.833] (**) Sleep Button: always reports core events
[ 14.833] (**) Sleep Button: Device: "/dev/input/event1"
[ 14.833] (--) Sleep Button: Found keys
[ 14.833] (II) Sleep Button: Configuring as keyboard
[ 14.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 14.833] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 14.833] (**) Option "xkb_rules" "evdev"
[ 14.833] (**) Option "xkb_model" "evdev"
[ 14.833] (**) Option "xkb_layout" "us"
[ 14.835] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event5)
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.835] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 14.835] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.835] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event5"
[ 14.835] (--) CHICONY HP Basic USB Keyboard: Found keys
[ 14.835] (II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 14.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.1/1-1.4.3.1:1.0/input/input5/event5"
[ 14.835] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD)
[ 14.835] (**) Option "xkb_rules" "evdev"
[ 14.835] (**) Option "xkb_model" "evdev"
[ 14.835] (**) Option "xkb_layout" "us"
[ 14.836] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 14.836] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 14.836] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 14.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.836] (**) Logitech USB Optical Mouse: always reports core events
[ 14.836] (**) Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 14.836] (--) Logitech USB Optical Mouse: Found 3 mouse buttons
[ 14.836] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 14.836] (--) Logitech USB Optical Mouse: Found relative axes
[ 14.836] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 14.836] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 14.836] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 14.836] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 14.836] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.2/1-1.4.3.2:1.0/input/input6/event6"
[ 14.836] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 14.836] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 14.836] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 14.837] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Intel PCH Line In at Sep Rear Jack (/dev/input/event13)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Right Jack (/dev/input/event14)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Rear Jack (/dev/input/event15)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Right Jack (/dev/input/event16)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event17)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event18)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.839] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event19)
[ 14.839] (II) No input driver/identifier specified (ignoring)
[ 14.840] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event10)
[ 14.840] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 14.840] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 14.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.840] (**) HP HD Webcam [Fixed]: always reports core events
[ 14.840] (**) HP HD Webcam [Fixed]: Device: "/dev/input/event10"
[ 14.840] (--) HP HD Webcam [Fixed]: Found keys
[ 14.840] (II) HP HD Webcam [Fixed]: Configuring as keyboard
[ 14.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10/event10"
[ 14.840] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD)
[ 14.840] (**) Option "xkb_rules" "evdev"
[ 14.840] (**) Option "xkb_model" "evdev"
[ 14.840] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.843] (--) AT Translated Set 2 keyboard: Found keys
[ 14.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 14.843] (**) Option "xkb_rules" "evdev"
[ 14.843] (**) Option "xkb_model" "evdev"
[ 14.843] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.843] (II) LoadModule: "synaptics"
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.850] compiled for 1.10.2, module version = 1.4.1
[ 14.850] Module class: X.Org XInput Driver
[ 14.850] ABI class: X.Org XInput driver, version 12.2
[ 14.850] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.850] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.850] (**) Option "Device" "/dev/input/event11"
[ 14.970] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5690
[ 14.970] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4854
[ 14.970] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.970] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.970] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 14.970] (**) Option "TapButton1" "1"
[ 14.970] (**) Option "TapButton2" "2"
[ 14.970] (**) Option "TapButton3" "3"
[ 15.076] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.076] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 15.183] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 15.183] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 15.183] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15.183] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.183] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 15.183] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.186] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 15.186] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15.186] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 15.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.186] (**) HP WMI hotkeys: always reports core events
[ 15.186] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 15.186] (--) HP WMI hotkeys: Found keys
[ 15.186] (II) HP WMI hotkeys: Configuring as keyboard
[ 15.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 15.186] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 15.186] (**) Option "xkb_rules" "evdev"
[ 15.186] (**) Option "xkb_model" "evdev"
[ 15.186] (**) Option "xkb_layout" "us"
[ 39.891] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 39.891] (II) intel(0): Printing DDC gathered Modelines:
[ 39.891] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.300] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.300] (II) intel(0): Printing DDC gathered Modelines:
[ 52.300] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.625] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.625] (II) intel(0): Printing DDC gathered Modelines:
[ 52.625] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 54.852] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 54.852] (II) intel(0): Printing DDC gathered Modelines:
[ 54.861] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 70.112] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 70.113] (II) intel(0): Printing DDC gathered Modelines:
[ 70.113] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 72.893] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 72.893] (II) intel(0): Printing DDC gathered Modelines:
[ 72.893] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.662] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 82.662] (II) intel(0): Printing DDC gathered Modelines:
[ 82.662] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.951] (II) intel(0): Allocated new frame buffer 1088x770 stride 4608, tiled
[ 83.011] (II) intel(0): Allocated new frame buffer 1728x1052 stride 7168, tiled
[ 83.497] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.497] (II) intel(0): Using hsync ranges from config file
[ 83.497] (II) intel(0): Using vrefresh ranges from config file
[ 83.497] (II) intel(0): Printing DDC gathered Modelines:
[ 83.497] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.497] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.497] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.497] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.497] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.497] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.498] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.498] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 83.787] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.787] (II) intel(0): Using hsync ranges from config file
[ 83.787] (II) intel(0): Using vrefresh ranges from config file
[ 83.787] (II) intel(0): Printing DDC gathered Modelines:
[ 83.787] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.787] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.787] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.787] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.787] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.787] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.788] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.788] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.094] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.094] (II) intel(0): Using hsync ranges from config file
[ 84.094] (II) intel(0): Using vrefresh ranges from config file
[ 84.094] (II) intel(0): Printing DDC gathered Modelines:
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.094] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.094] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.094] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.094] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.094] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.094] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.219] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 84.276] (EE) intel(0): failed to set mode: Invalid argument
[ 84.467] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.467] (II) intel(0): Using hsync ranges from config file
[ 84.467] (II) intel(0): Using vrefresh ranges from config file
[ 84.467] (II) intel(0): Printing DDC gathered Modelines:
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.467] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.467] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.467] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.467] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.467] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.467] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.807] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.807] (II) intel(0): Using hsync ranges from config file
[ 84.807] (II) intel(0): Using vrefresh ranges from config file
[ 84.807] (II) intel(0): Printing DDC gathered Modelines:
[ 84.807] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.807] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.807] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.807] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.807] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.807] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.808] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.808] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.104] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.104] (II) intel(0): Using hsync ranges from config file
[ 85.104] (II) intel(0): Using vrefresh ranges from config file
[ 85.104] (II) intel(0): Printing DDC gathered Modelines:
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.104] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.104] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.104] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.104] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.104] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.104] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.447] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.447] (II) intel(0): Using hsync ranges from config file
[ 85.447] (II) intel(0): Using vrefresh ranges from config file
[ 85.447] (II) intel(0): Printing DDC gathered Modelines:
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.447] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.447] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.447] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.447] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.447] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.447] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.791] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.791] (II) intel(0): Using hsync ranges from config file
[ 85.791] (II) intel(0): Using vrefresh ranges from config file
[ 85.791] (II) intel(0): Printing DDC gathered Modelines:
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.791] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.791] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.791] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 86.169] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.169] (WW) intel(0): Page flip failed: Device or resource busy
[ 86.313] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.313] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.047] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 100.047] (II) intel(0): Using hsync ranges from config file
[ 100.047] (II) intel(0): Using vrefresh ranges from config file
[ 100.047] (II) intel(0): Printing DDC gathered Modelines:
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 100.047] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.047] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.047] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 100.047] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 100.047] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 100.047] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 100.156] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.156] (II) intel(0): Printing DDC gathered Modelines:
[ 100.156] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 100.464] (WW) intel(0): flip queue failed: Device or resource busy
[ 100.464] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.472] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 100.790] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.790] (II) intel(0): Printing DDC gathered Modelines:
[ 100.790] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.081] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.081] (II) intel(0): Printing DDC gathered Modelines:
[ 101.081] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.435] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.435] (II) intel(0): Printing DDC gathered Modelines:
[ 101.435] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 190.516] (II) AIGLX: Suspending AIGLX clients for VT switchSince this is a multi-part problem I guess my initial task is to understand why going directly to disabling the laptop's LCD and setting my external monitor to 1680x1050 (Auto) doesn't work without going through the other steps.
Last edited by nnelson123 (2011-10-05 13:48:19)
Offline
[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.
--------------------------The only wasted day is one in which you learn nothing.--------------------------
Offline
Pages: 1