You are not logged in.
Pages: 1
I installed drivers as https://wiki.archlinux.org/index.php/Nouveau
$ xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
DVI-I-1 disconnected (normal left inverted right x axis y axis)
Monitor - full hd.
How can I set greater resolution?
$ lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
$ xrandr --output VGA-1 --mode 1280x800 --pos 0x0
xrandr: cannot find mode 1280x800
Last edited by rage (2011-10-30 12:29:55)
Offline
Did you reboot your computer after installing the driver?
Offline
yes
Offline
Any errors in the logs? Is the nouveau module loaded?
Offline
yes, loaded.
No errors. xfce DE is running at 1024x768
Offline
Bug in nouveau? What about when you install nvidia package? Once you do and reboot, run
$ nvidia-settings
Last edited by graysky (2011-10-19 17:45:38)
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
When set up nvidia
pacman -S nvidia
in xorg.log was error
FATAL: Error inserting nvidia (/lib/modules/3.0-ARCH/kernel/drivers/video/nvidia.ko.gz): No such device
Offline
Bug in nouveau? What about when you install nvidia package? Once you do and reboot, run
$ nvidia-settings
For this card he should be using nvidia-173xx which aren't compatible with the current xorg-server and have been temporarily removed from the repos http://mailman.archlinux.org/pipermail/ … 21764.html
Offline
My bad... you need to use the 173-x series, not the nvidia package.
Last edited by graysky (2011-10-19 17:50:52)
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
HA! Karol pushed "Submit" quicker than I could. In any case, it looks like you'll need to get nouveau working or upgrade to a different videoboard.
Last edited by graysky (2011-10-19 17:52:22)
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
have you tried an older version of the nvidia driver? and be sure to deinstall nouveau
Offline
HA! Karol pushed "Submit" quicker than I could. In any case, it looks like you'll need to get nouveau working or upgrade to a different videoboard.
On which one?
Offline
have you tried an older version of the nvidia driver? and be sure to deinstall nouveau
I tried
$ yaourt -S nvidia-173xx-all
==> Install or build missing dependencies for nvidia-173xx-all:
error: not found: nvidia-173xx-utils>=173.14.27
Offline
On which one?
I would recommend that you purchase one that is powered by the 'nvidia' package for sure. WIthout knowing your requirements, I would not recommend anything specific. If it's just general usage, ie no games, something energy efficient and not too powerful. I have an GTS 450 which is perfect for me but I don't play games. Pretty much anything is an upgrade from an FX series.
Last edited by graysky (2011-10-19 18:36:20)
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
WIthout knowing your requirements, I would not recommend anything specific.
I need AGP card, which can work on full or half HD in archlinux.
Now, 1024x768 - its not good
Thank you, everyone, for all your help.
Offline
I have NVIDIA 5200go (for notebooks) and I have no problems.
Offline
I have NVIDIA 5200go (for notebooks) and I have no problems.
what driver you have installed?
Offline
graysky wrote:WIthout knowing your requirements, I would not recommend anything specific.
I need AGP card, which can work on full or half HD in archlinux.
Now, 1024x768 - its not good
Thank you, everyone, for all your help.
AGP might limit you to like a 6200 series.... no VDPAU if that is important. What about a PCI card? AGP isn't going to be better if you use a modern GPU in a PCI slot.
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
trapanator wrote:I have NVIDIA 5200go (for notebooks) and I have no problems.
what driver you have installed?
the official one.
Offline
the official one.
That doesn't say anything, there are four branches of the official driver (if by "official" you mean the nvidia proprietary driver). For a Geforce 5 card you need to use nvidia-173xx, but that one won't work with xorg-server-1.11. So the only way to use it is to stick with xorg-server-1.10
@rage: I'd advise a Geforce 8400 PCI. Note, that's PCI and not PCIe. They're getting more and more rare now though, which affects their price. Or you stick with your Geforce 5 and then either use xorg-server-1.10 or switch to the nouveau driver. I personally would go with xorg-server-1.10, and wait until nvidia releases a new driver from the 173xx branch.
Offline
I have nvidia fx 5500 and it works with both nouveau and nvidia-173xx.
How are you connecting your card to the monitor? Some VGA-to-something connector?
Post your grub's menu.lst, the xorg log, xorg.conf if you're using one, /etc/mkinitcpio.conf, /etc/modprobe.d/modprobe.conf, the output of 'ls /etc/modprobe.d/' and the output of lsmod.
Offline
How are you connecting your card to the monitor? Some VGA-to-something connector?
Post your grub's menu.lst, the xorg log, xorg.conf if you're using one, /etc/mkinitcpio.conf, /etc/modprobe.d/modprobe.conf, the output of 'ls /etc/modprobe.d/' and the output of lsmod.
Monitor has connected directly to VGA connector through 3 m cable.
$ cat /boot/grub/menu.lst | grep -v "#"
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/md3 ro
initrd /initramfs-linux.img
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/md3 ro
initrd /initramfs-linux-fallback.img
note: this computer has noy mouse and keybord
$ cat /var/log/Xorg.0.log
[ 14.840]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 14.840] X Protocol Version 11, Revision 0
[ 14.840] Build Operating System: Linux 3.0-ARCH i686
[ 14.840] Current Operating System: Linux fb 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 10:11:05 UTC 2011 i686
[ 14.840] Kernel command line: root=/dev/md3 ro
[ 14.840] Build Date: 10 October 2011 08:49:15AM
[ 14.840]
[ 14.840] Current version of pixman: 0.22.2
[ 14.840] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.840] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.840] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 19 20:56:33 2011
[ 14.873] (==) Using config file: "/etc/X11/xorg.conf"
[ 14.873] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.891] (==) ServerLayout "Layout0"
[ 14.891] (**) |-->Screen "Screen0" (0)
[ 14.891] (**) | |-->Monitor "Monitor0"
[ 14.900] (**) | |-->Device "Device0"
[ 14.906] (**) |-->Input Device "Keyboard0"
[ 14.906] (**) |-->Input Device "Mouse0"
[ 14.906] (==) Automatically adding devices
[ 14.906] (==) Automatically enabling devices
[ 14.958] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.958] Entry deleted from font path.
[ 15.059] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15.059] Entry deleted from font path.
[ 15.059] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15.059] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.059] Entry deleted from font path.
[ 15.059] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.059] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 15.059] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.059] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 15.059] (WW) Disabling Keyboard0
[ 15.059] (WW) Disabling Mouse0
[ 15.072] (II) Loader magic: 0x8228580
[ 15.072] (II) Module ABI versions:
[ 15.072] X.Org ANSI C Emulation: 0.4
[ 15.072] X.Org Video Driver: 11.0
[ 15.072] X.Org XInput driver : 13.0
[ 15.072] X.Org Server Extension : 6.0
[ 15.074] (--) PCI:*(0:1:0:0) 10de:0322:19da:2015 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, BIOS @ 0x????????/131072
[ 15.074] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.074] (II) LoadModule: "extmod"
[ 15.079] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.100] (II) Module extmod: vendor="X.Org Foundation"
[ 15.100] compiled for 1.11.1, module version = 1.0.0
[ 15.100] Module class: X.Org Server Extension
[ 15.100] ABI class: X.Org Server Extension, version 6.0
[ 15.100] (II) Loading extension MIT-SCREEN-SAVER
[ 15.100] (II) Loading extension XFree86-VidModeExtension
[ 15.100] (II) Loading extension XFree86-DGA
[ 15.104] (II) Loading extension DPMS
[ 15.104] (II) Loading extension XVideo
[ 15.104] (II) Loading extension XVideo-MotionCompensation
[ 15.104] (II) Loading extension X-Resource
[ 15.104] (II) LoadModule: "dbe"
[ 15.104] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.120] (II) Module dbe: vendor="X.Org Foundation"
[ 15.120] compiled for 1.11.1, module version = 1.0.0
[ 15.120] Module class: X.Org Server Extension
[ 15.120] ABI class: X.Org Server Extension, version 6.0
[ 15.120] (II) Loading extension DOUBLE-BUFFER
[ 15.120] (II) LoadModule: "glx"
[ 15.120] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.184] (II) Module glx: vendor="X.Org Foundation"
[ 15.184] compiled for 1.11.1, module version = 1.0.0
[ 15.184] ABI class: X.Org Server Extension, version 6.0
[ 15.184] (==) AIGLX enabled
[ 15.184] (II) Loading extension GLX
[ 15.185] (II) LoadModule: "record"
[ 15.185] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.194] (II) Module record: vendor="X.Org Foundation"
[ 15.194] compiled for 1.11.1, module version = 1.13.0
[ 15.194] Module class: X.Org Server Extension
[ 15.194] ABI class: X.Org Server Extension, version 6.0
[ 15.195] (II) Loading extension RECORD
[ 15.195] (II) LoadModule: "dri"
[ 15.195] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.199] (II) Module dri: vendor="X.Org Foundation"
[ 15.199] compiled for 1.11.1, module version = 1.0.0
[ 15.200] ABI class: X.Org Server Extension, version 6.0
[ 15.200] (II) Loading extension XFree86-DRI
[ 15.200] (II) LoadModule: "dri2"
[ 15.200] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.200] (II) Module dri2: vendor="X.Org Foundation"
[ 15.200] compiled for 1.11.1, module version = 1.2.0
[ 15.200] ABI class: X.Org Server Extension, version 6.0
[ 15.201] (II) Loading extension DRI2
[ 15.201] (II) LoadModule: "nouveau"
[ 15.237] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 15.260] (II) Module nouveau: vendor="X.Org Foundation"
[ 15.260] compiled for 1.11.0, module version = 0.0.16
[ 15.260] Module class: X.Org Video Driver
[ 15.260] ABI class: X.Org Video Driver, version 11.0
[ 15.260] (II) NOUVEAU driver
[ 15.260] (II) NOUVEAU driver for NVIDIA chipset families :
[ 15.260] RIVA TNT (NV04)
[ 15.260] RIVA TNT2 (NV05)
[ 15.260] GeForce 256 (NV10)
[ 15.260] GeForce 2 (NV11, NV15)
[ 15.260] GeForce 4MX (NV17, NV18)
[ 15.260] GeForce 3 (NV20)
[ 15.260] GeForce 4Ti (NV25, NV28)
[ 15.260] GeForce FX (NV3x)
[ 15.260] GeForce 6 (NV4x)
[ 15.260] GeForce 7 (G7x)
[ 15.260] GeForce 8 (G8x)
[ 15.260] GeForce GTX 200 (NVA0)
[ 15.260] GeForce GTX 400 (NVC0)
[ 15.261] (++) using VT number 7
[ 15.262] drmOpenDevice: node name is /dev/dri/card0
[ 15.262] drmOpenDevice: open result is 7, (OK)
[ 15.262] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 15.262] drmOpenDevice: node name is /dev/dri/card0
[ 15.262] drmOpenDevice: open result is 7, (OK)
[ 15.262] drmOpenByBusid: drmOpenMinor returns 7
[ 15.262] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 15.262] (II) [drm] nouveau interface version: 0.0.16
[ 15.262] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 15.262] (II) Loading sub module "dri"
[ 15.262] (II) LoadModule: "dri"
[ 15.262] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.262] (II) Module dri: vendor="X.Org Foundation"
[ 15.262] compiled for 1.11.1, module version = 1.0.0
[ 15.262] ABI class: X.Org Server Extension, version 6.0
[ 15.262] (II) NOUVEAU(0): Loaded DRI module
[ 15.263] drmOpenDevice: node name is /dev/dri/card0
[ 15.263] drmOpenDevice: open result is 8, (OK)
[ 15.263] drmOpenDevice: node name is /dev/dri/card0
[ 15.263] drmOpenDevice: open result is 8, (OK)
[ 15.263] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 15.263] drmOpenDevice: node name is /dev/dri/card0
[ 15.263] drmOpenDevice: open result is 8, (OK)
[ 15.263] drmOpenByBusid: drmOpenMinor returns 8
[ 15.263] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 15.263] (II) [drm] DRM interface version 1.4
[ 15.263] (II) [drm] DRM open master succeeded.
[ 15.263] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 15.263] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 15.263] (==) NOUVEAU(0): RGB weight 888
[ 15.263] (==) NOUVEAU(0): Default visual is TrueColor
[ 15.263] (==) NOUVEAU(0): Using HW cursor
[ 15.263] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 15.263] (==) NOUVEAU(0): Page flipping enabled
[ 15.293] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 15.309] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 15.333] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 15.363] (II) NOUVEAU(0): EDID for output VGA-1
[ 15.363] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 15.363] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.363] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.363] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 15.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 15.380] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 15.406] (II) NOUVEAU(0): EDID for output TV-1
[ 15.406] (II) NOUVEAU(0): Printing probed modes for output TV-1
[ 15.407] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz)
[ 15.407] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz)
[ 15.407] (II) NOUVEAU(0): Output VGA-1 connected
[ 15.407] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 15.407] (II) NOUVEAU(0): Output TV-1 connected
[ 15.407] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 15.407] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 15.407] (II) NOUVEAU(0): Output TV-1 using initial mode 1024x768
[ 15.407] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.407] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 15.407] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 15.407] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.407] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 15.407] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.407] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 15.407] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15.407] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 15.407] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 15.407] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 15.407] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 15.407] (==) NOUVEAU(0): DPI set to (96, 96)
[ 15.407] (II) Loading sub module "fb"
[ 15.407] (II) LoadModule: "fb"
[ 15.408] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.469] (II) Module fb: vendor="X.Org Foundation"
[ 15.469] compiled for 1.11.1, module version = 1.0.0
[ 15.469] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.469] (II) Loading sub module "exa"
[ 15.469] (II) LoadModule: "exa"
[ 15.469] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 15.480] (II) Module exa: vendor="X.Org Foundation"
[ 15.481] compiled for 1.11.1, module version = 2.5.0
[ 15.481] ABI class: X.Org Video Driver, version 11.0
[ 15.481] (II) Loading sub module "shadowfb"
[ 15.481] (II) LoadModule: "shadowfb"
[ 15.481] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 15.488] (II) Module shadowfb: vendor="X.Org Foundation"
[ 15.488] compiled for 1.11.1, module version = 1.0.0
[ 15.488] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.488] (--) Depth 24 pixmap format is 32 bpp
[ 15.489] (II) NOUVEAU(0): Opened GPU channel 1
[ 15.489] (II) NOUVEAU(0): [DRI2] Setup complete
[ 15.489] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 15.489] (II) NOUVEAU(0): GART: 64MiB available
[ 15.500] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 15.538] (II) EXA(0): Driver allocated offscreen pixmaps
[ 15.538] (II) EXA(0): Driver registered support for the following operations:
[ 15.538] (II) Solid
[ 15.538] (II) Copy
[ 15.538] (II) Composite (RENDER acceleration)
[ 15.538] (II) UploadToScreen
[ 15.538] (II) DownloadFromScreen
[ 15.538] (==) NOUVEAU(0): Backing store disabled
[ 15.538] (==) NOUVEAU(0): Silken mouse enabled
[ 15.538] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 15.538] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 15.538] (**) NOUVEAU(0): DPMS enabled
[ 15.538] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.539] (--) RandR disabled
[ 15.539] (II) Initializing built-in extension Generic Event Extension
[ 15.539] (II) Initializing built-in extension SHAPE
[ 15.539] (II) Initializing built-in extension MIT-SHM
[ 15.539] (II) Initializing built-in extension XInputExtension
[ 15.539] (II) Initializing built-in extension XTEST
[ 15.539] (II) Initializing built-in extension BIG-REQUESTS
[ 15.539] (II) Initializing built-in extension SYNC
[ 15.539] (II) Initializing built-in extension XKEYBOARD
[ 15.539] (II) Initializing built-in extension XC-MISC
[ 15.539] (II) Initializing built-in extension SECURITY
[ 15.539] (II) Initializing built-in extension XINERAMA
[ 15.539] (II) Initializing built-in extension XFIXES
[ 15.539] (II) Initializing built-in extension RENDER
[ 15.539] (II) Initializing built-in extension RANDR
[ 15.539] (II) Initializing built-in extension COMPOSITE
[ 15.539] (II) Initializing built-in extension DAMAGE
[ 16.112] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.112] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.112] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.112] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 16.112] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.113] (II) AIGLX: Loaded and initialized nouveau
[ 16.113] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.116] (II) NOUVEAU(0): NVEnterVT is called.
[ 16.137] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 16.137] resize called 1024 768
[ 16.719] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.719] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.719] (II) LoadModule: "evdev"
[ 16.719] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.738] (II) Module evdev: vendor="X.Org Foundation"
[ 16.738] compiled for 1.10.99.902, module version = 2.6.0
[ 16.738] Module class: X.Org XInput Driver
[ 16.738] ABI class: X.Org XInput driver, version 13.0
[ 16.738] (II) Using input driver 'evdev' for 'Power Button'
[ 16.738] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.738] (**) Power Button: always reports core events
[ 16.738] (**) Power Button: Device: "/dev/input/event2"
[ 16.738] (--) Power Button: Found keys
[ 16.739] (II) Power Button: Configuring as keyboard
[ 16.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 16.739] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.739] (**) Option "xkb_rules" "evdev"
[ 16.739] (**) Option "xkb_model" "evdev"
[ 16.739] (**) Option "xkb_layout" "us"
[ 16.776] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.776] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.776] (II) Using input driver 'evdev' for 'Power Button'
[ 16.777] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.777] (**) Power Button: always reports core events
[ 16.777] (**) Power Button: Device: "/dev/input/event1"
[ 16.777] (--) Power Button: Found keys
[ 16.777] (II) Power Button: Configuring as keyboard
[ 16.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 16.777] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.777] (**) Option "xkb_rules" "evdev"
[ 16.777] (**) Option "xkb_model" "evdev"
[ 16.777] (**) Option "xkb_layout" "us"
[ 16.778] (II) config/udev: Adding input device PC Speaker (/dev/input/event0)
[ 16.778] (II) No input driver/identifier specified (ignoring)
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Wed Jan 27 03:02:48 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ cat /etc/mkinitcpio.conf | grep -v "#"
MODULES="dm_mod"
BINARIES=""
FILES=""
HOOKS="base udev mdadm autodetect pata scsi sata filesystems usbinput"
$ cat /etc/modprobe.d/modprobe.conf
#
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
#
$ ls /etc/modprobe.d
modprobe.conf
$ lsmod
Module Size Used by
tun 12721 2
w83627hf 16079 0
hwmon_vid 2056 1 w83627hf
ipv6 249894 23
nouveau 639882 2
ttm 45269 1 nouveau
drm_kms_helper 21997 1 nouveau
drm 147750 4 nouveau,ttm,drm_kms_helper
snd_intel8x0 22364 3
i2c_algo_bit 4423 1 nouveau
snd_ac97_codec 90021 1 snd_intel8x0
mxm_wmi 1101 1 nouveau
wmi 7199 1 mxm_wmi
evdev 7278 2
3c59x 29834 0
e100 26857 0
ppdev 4814 0
ac97_bus 810 1 snd_ac97_codec
snd_pcm 60079 3 snd_intel8x0,snd_ac97_codec
snd_timer 15374 1 snd_pcm
snd 43561 9 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
iTCO_wdt 10293 0
mii 3375 2 3c59x,e100
video 9780 1 nouveau
psmouse 56431 0
iTCO_vendor_support 1545 1 iTCO_wdt
soundcore 4986 1 snd
intel_agp 8720 1
intel_gtt 11417 1 intel_agp
parport_pc 27806 0
i2c_i801 7063 0
processor 21876 0
button 3646 1 nouveau
serio_raw 3390 0
pcspkr 1375 0
agpgart 22096 4 ttm,drm,intel_agp,intel_gtt
shpchp 22529 0
parport 25939 2 ppdev,parport_pc
i2c_core 16625 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
sg 20982 0
pci_hotplug 22322 1 shpchp
floppy 48773 0
snd_page_alloc 5837 2 snd_intel8x0,snd_pcm
ext4 337790 4
mbcache 4249 1 ext4
jbd2 59488 1 ext4
crc16 1069 1 ext4
raid1 19935 5
md_mod 88469 6 raid1
sr_mod 13244 0
cdrom 31277 1 sr_mod
sd_mod 26147 12
pata_acpi 2388 0
uhci_hcd 19609 0
ata_piix 18561 10
libata 154449 2 pata_acpi,ata_piix
scsi_mod 111801 4 sg,sr_mod,sd_mod,libata
ehci_hcd 34935 0
usbcore 119612 3 uhci_hcd,ehci_hcd
dm_mod 56795 0
Offline
Another FX 5500 with driver from nvidia
http://www.nvidia.com/content/DriverDow … type=Other
Xorg error. Only nouveau works, but only on 1024x768
Offline
Problem is in cable...
Nouveau works fine.
Last edited by rage (2011-10-30 12:29:37)
Offline
Pages: 1