You are not logged in.

Pages: 1 2

#1 2011-10-24 02:52:45

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Nvidia kernel module not starting after upgrade

I did a full system upgrade this morning and when I rebooted, I got this error on startx : http://i.min.us/jQcwS6vBYyROs.jpg. I've been through the forums and on irc, but have yet to figure out a solution. I've downgraded the nvidia driver, done other upgrades, recreated the xorg.conf with nvidia-xonfig. I really don't know what to do anymore. Any help would be great.

Last edited by c0dege3k (2011-10-25 13:04:53)

Offline

#2 2011-10-24 03:10:33

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: Nvidia kernel module not starting after upgrade

Note the API mismatch in the error message. You're loading an old nvidia kernel module. You don't by chance have 'nvidia' listed in /etc/mkinitcpio.conf?

blog | ±github

Offline

#3 2011-10-24 03:27:04

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

You may wish to edit the title to say something like "nVidia Kernel Module fails to initialise".

Your problem isn't with X; X is trying to provide as much help as it can in response to your module-level problems.

Offline

#4 2011-10-25 13:05:25

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

falconindy wrote:

Note the API mismatch in the error message. You're loading an old nvidia kernel module. You don't by chance have 'nvidia' listed in /etc/mkinitcpio.conf?

Nope, it's not in there

Offline

#5 2011-10-25 20:47:36

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Here's the full log if it helps:

[ 12081.619] 
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 12081.620] X Protocol Version 11, Revision 0
[ 12081.620] Build Operating System: Linux 3.0-ARCH x86_64 
[ 12081.620] Current Operating System: Linux J4RV1S 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64
[ 12081.620] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda3 ro
[ 12081.620] Build Date: 10 October 2011  08:55:30AM
[ 12081.621]  
[ 12081.621] Current version of pixman: 0.22.2
[ 12081.621] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[ 12081.621] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12081.623] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 24 18:06:59 2011
[ 12081.637] (==) Using config file: "/etc/X11/xorg.conf"
[ 12081.637] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12081.637] (==) ServerLayout "Layout0"
[ 12081.637] (**) |-->Screen "Screen0" (0)
[ 12081.637] (**) |   |-->Monitor "Monitor0"
[ 12081.637] (**) |   |-->Device "Device0"
[ 12081.637] (**) |-->Input Device "Keyboard0"
[ 12081.637] (**) |-->Input Device "Mouse0"
[ 12081.637] (==) Automatically adding devices
[ 12081.637] (==) Automatically enabling devices
[ 12081.638] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12081.638] 	Entry deleted from font path.
[ 12081.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12081.638] 	Entry deleted from font path.
[ 12081.638] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12081.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12081.638] 	Entry deleted from font path.
[ 12081.638] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12081.638] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[ 12081.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12081.638] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12081.638] (WW) Disabling Keyboard0
[ 12081.638] (WW) Disabling Mouse0
[ 12081.638] (II) Loader magic: 0x7ccae0
[ 12081.638] (II) Module ABI versions:
[ 12081.638] 	X.Org ANSI C Emulation: 0.4
[ 12081.638] 	X.Org Video Driver: 11.0
[ 12081.638] 	X.Org XInput driver : 13.0
[ 12081.638] 	X.Org Server Extension : 6.0
[ 12081.639] (--) PCI:*(0:1:0:0) 10de:06e9:1043:19b2 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 12081.639] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12081.639] (II) LoadModule: "extmod"
[ 12081.677] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12081.677] (II) Module extmod: vendor="X.Org Foundation"
[ 12081.677] 	compiled for 1.11.1, module version = 1.0.0
[ 12081.677] 	Module class: X.Org Server Extension
[ 12081.677] 	ABI class: X.Org Server Extension, version 6.0
[ 12081.677] (II) Loading extension MIT-SCREEN-SAVER
[ 12081.677] (II) Loading extension XFree86-VidModeExtension
[ 12081.677] (II) Loading extension XFree86-DGA
[ 12081.677] (II) Loading extension DPMS
[ 12081.677] (II) Loading extension XVideo
[ 12081.677] (II) Loading extension XVideo-MotionCompensation
[ 12081.677] (II) Loading extension X-Resource
[ 12081.677] (II) LoadModule: "dbe"
[ 12081.678] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12081.678] (II) Module dbe: vendor="X.Org Foundation"
[ 12081.678] 	compiled for 1.11.1, module version = 1.0.0
[ 12081.678] 	Module class: X.Org Server Extension
[ 12081.678] 	ABI class: X.Org Server Extension, version 6.0
[ 12081.678] (II) Loading extension DOUBLE-BUFFER
[ 12081.678] (II) LoadModule: "glx"
[ 12081.678] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12081.693] (II) Module glx: vendor="NVIDIA Corporation"
[ 12081.693] 	compiled for 4.0.2, module version = 1.0.0
[ 12081.693] 	Module class: X.Org Server Extension
[ 12081.693] (II) NVIDIA GLX Module  285.05.09  Fri Sep 23 17:51:24 PDT 2011
[ 12081.693] (II) Loading extension GLX
[ 12081.693] (II) LoadModule: "record"
[ 12081.693] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12081.693] (II) Module record: vendor="X.Org Foundation"
[ 12081.693] 	compiled for 1.11.1, module version = 1.13.0
[ 12081.693] 	Module class: X.Org Server Extension
[ 12081.693] 	ABI class: X.Org Server Extension, version 6.0
[ 12081.693] (II) Loading extension RECORD
[ 12081.693] (II) LoadModule: "dri"
[ 12081.693] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12081.694] (II) Module dri: vendor="X.Org Foundation"
[ 12081.694] 	compiled for 1.11.1, module version = 1.0.0
[ 12081.694] 	ABI class: X.Org Server Extension, version 6.0
[ 12081.694] (II) Loading extension XFree86-DRI
[ 12081.694] (II) LoadModule: "dri2"
[ 12081.694] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12081.694] (II) Module dri2: vendor="X.Org Foundation"
[ 12081.694] 	compiled for 1.11.1, module version = 1.2.0
[ 12081.694] 	ABI class: X.Org Server Extension, version 6.0
[ 12081.694] (II) Loading extension DRI2
[ 12081.694] (II) LoadModule: "nvidia"
[ 12081.694] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12081.695] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12081.695] 	compiled for 4.0.2, module version = 1.0.0
[ 12081.695] 	Module class: X.Org Video Driver
[ 12081.695] (II) NVIDIA dlloader X Driver  285.05.09  Fri Sep 23 17:33:35 PDT 2011
[ 12081.695] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12081.695] (--) using VT number 7

[ 12081.698] (II) Loading sub module "fb"
[ 12081.698] (II) LoadModule: "fb"
[ 12081.698] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12081.699] (II) Module fb: vendor="X.Org Foundation"
[ 12081.699] 	compiled for 1.11.1, module version = 1.0.0
[ 12081.699] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 12081.699] (II) Loading sub module "wfb"
[ 12081.699] (II) LoadModule: "wfb"
[ 12081.699] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12081.699] (II) Module wfb: vendor="X.Org Foundation"
[ 12081.699] 	compiled for 1.11.1, module version = 1.0.0
[ 12081.699] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 12081.699] (II) Loading sub module "ramdac"
[ 12081.699] (II) LoadModule: "ramdac"
[ 12081.699] (II) Module "ramdac" already built-in
[ 12081.699] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12081.699] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 12081.699] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12081.699] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12081.699] (==) NVIDIA(0): RGB weight 888
[ 12081.699] (==) NVIDIA(0): Default visual is TrueColor
[ 12081.699] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12081.699] (**) NVIDIA(0): Option "TwinView" "True"
[ 12081.699] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
[ 12081.700] (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module. Please see the
[ 12081.700] (EE) NVIDIA(0):     system's kernel log for additional error messages and
[ 12081.700] (EE) NVIDIA(0):     consult the NVIDIA README for details.
[ 12081.700] (EE) NVIDIA(0):  *** Aborting ***
[ 12081.700] (II) UnloadModule: "nvidia"
[ 12081.700] (II) Unloading nvidia
[ 12081.700] (II) UnloadModule: "wfb"
[ 12081.700] (II) Unloading wfb
[ 12081.700] (II) UnloadModule: "fb"
[ 12081.700] (II) Unloading fb
[ 12081.700] (EE) Screen(s) found, but none have a usable configuration.
[ 12081.700] 
Fatal server error:
[ 12081.700] no screens found
[ 12081.700] 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[ 12081.700] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 12081.700] 
[ 12081.703] Server terminated with error (1). Closing log file.

Offline

#6 2011-10-25 20:51:04

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

What about the system's kernel log? The error message you received directed you to investigate that file.

Offline

#7 2011-10-25 20:52:10

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

You mean the /var/log/Xorg.0.log? That is it

Offline

#8 2011-10-25 20:54:46

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

c0dege3k wrote:

You mean the /var/log/Xorg.0.log? That is it

That is your X log. X is just a set of programs and libraries which has nothing to do with your problem. The log file you've provided just repeats the information from your screenshot. They both reference a kernel log, which is the log for the actual kernel, running underneath X.

I'm not on my Arch machine at the moment, so I don't know what the file is called. On my debian machine, I suppose it's the one called kern.log, although I'm not an expert on these things.

Last edited by /dev/zero (2011-10-25 20:57:16)

Offline

#9 2011-10-25 21:03:05

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Ok, I found it -/var/log/kern.log

Oct 25 19:52:02 ubuntu kernel: [    3.943869] TCP cubic registered
Oct 25 19:52:02 ubuntu kernel: [    3.943991] NET: Registered protocol family 10
Oct 25 19:52:02 ubuntu kernel: [    3.944496] NET: Registered protocol family 17
Oct 25 19:52:02 ubuntu kernel: [    3.944515] Registering the dns_resolver key type
Oct 25 19:52:02 ubuntu kernel: [    3.944613] PM: Hibernation image not present or could not be loaded.
Oct 25 19:52:02 ubuntu kernel: [    3.944626] registered taskstats version 1
Oct 25 19:52:02 ubuntu kernel: [    3.962485]   Magic number: 15:259:901
Oct 25 19:52:02 ubuntu kernel: [    3.962613] rtc_cmos 00:03: setting system clock to 2011-10-25 19:51:47 UTC (1319572307)
Oct 25 19:52:02 ubuntu kernel: [    3.963178] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 25 19:52:02 ubuntu kernel: [    3.963181] EDD information not available.
Oct 25 19:52:02 ubuntu kernel: [    3.965216] Freeing unused kernel memory: 984k freed
Oct 25 19:52:02 ubuntu kernel: [    3.965511] Write protecting the kernel read-only data: 10240k
Oct 25 19:52:02 ubuntu kernel: [    3.965763] Freeing unused kernel memory: 20k freed
Oct 25 19:52:02 ubuntu kernel: [    3.971106] Freeing unused kernel memory: 1400k freed
Oct 25 19:52:02 ubuntu kernel: [    3.980749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Oct 25 19:52:02 ubuntu kernel: [    4.048318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 25 19:52:02 ubuntu kernel: [    4.048354] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 25 19:52:02 ubuntu kernel: [    4.048406] r8169 0000:06:00.0: setting latency timer to 64
Oct 25 19:52:02 ubuntu kernel: [    4.048487] r8169 0000:06:00.0: irq 45 for MSI/MSI-X
Oct 25 19:52:02 ubuntu kernel: [    4.048952] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc9000104c000, 50:38:b4:db:13:00, XID 1c4000c0 IRQ 45
Oct 25 19:52:02 ubuntu kernel: [    4.050103] ahci 0000:00:1f.2: version 3.0
Oct 25 19:52:02 ubuntu kernel: [    4.050121] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 25 19:52:02 ubuntu kernel: [    4.050183] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
Oct 25 19:52:02 ubuntu kernel: [    4.050246] ahci: SSS flag set, parallel bus scan disabled
Oct 25 19:52:02 ubuntu kernel: [    4.050285] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
Oct 25 19:52:02 ubuntu kernel: [    4.050289] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
Oct 25 19:52:02 ubuntu kernel: [    4.050295] ahci 0000:00:1f.2: setting latency timer to 64
Oct 25 19:52:02 ubuntu kernel: [    4.070524] scsi0 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.074913] scsi1 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.078079] scsi2 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.081168] scsi3 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.083814] scsi4 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.086354] scsi5 : ahci
Oct 25 19:52:02 ubuntu kernel: [    4.086669] ata1: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff100 irq 46
Oct 25 19:52:02 ubuntu kernel: [    4.086674] ata2: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff180 irq 46
Oct 25 19:52:02 ubuntu kernel: [    4.086676] ata3: DUMMY
Oct 25 19:52:02 ubuntu kernel: [    4.086677] ata4: DUMMY
Oct 25 19:52:02 ubuntu kernel: [    4.086679] ata5: DUMMY
Oct 25 19:52:02 ubuntu kernel: [    4.086682] ata6: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff380 irq 46
Oct 25 19:52:02 ubuntu kernel: [    4.100269] sdhci: Secure Digital Host Controller Interface driver
Oct 25 19:52:02 ubuntu kernel: [    4.100273] sdhci: Copyright(c) Pierre Ossman
Oct 25 19:52:02 ubuntu kernel: [    4.159286] acpi device:1d: registered as cooling_device2
Oct 25 19:52:02 ubuntu kernel: [    4.159404] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input4
Oct 25 19:52:02 ubuntu kernel: [    4.159484] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Oct 25 19:52:02 ubuntu kernel: [    4.248109] usb 2-4: new high speed USB device number 2 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [    4.383987] usbcore: registered new interface driver uas
Oct 25 19:52:02 ubuntu kernel: [    4.408053] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 25 19:52:02 ubuntu kernel: [    4.408906] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.408972] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 25 19:52:02 ubuntu kernel: [    4.408977] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.409317] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
Oct 25 19:52:02 ubuntu kernel: [    4.409320] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Oct 25 19:52:02 ubuntu kernel: [    4.409971] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.410034] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 25 19:52:02 ubuntu kernel: [    4.410038] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.410377] ata1.00: configured for UDMA/133
Oct 25 19:52:02 ubuntu kernel: [    4.410528] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
Oct 25 19:52:02 ubuntu kernel: [    4.410702] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 25 19:52:02 ubuntu kernel: [    4.410735] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 25 19:52:02 ubuntu kernel: [    4.410822] sd 0:0:0:0: [sda] Write Protect is off
Oct 25 19:52:02 ubuntu kernel: [    4.410825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 25 19:52:02 ubuntu kernel: [    4.410882] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 25 19:52:02 ubuntu kernel: [    4.492043] usb 2-5: new high speed USB device number 3 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [    4.632239]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Oct 25 19:52:02 ubuntu kernel: [    4.632706] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 25 19:52:02 ubuntu kernel: [    4.728069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 25 19:52:02 ubuntu kernel: [    4.732886] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 25 19:52:02 ubuntu kernel: [    4.732890] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.736800] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SR04, max UDMA/133
Oct 25 19:52:02 ubuntu kernel: [    4.742924] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 25 19:52:02 ubuntu kernel: [    4.742928] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 25 19:52:02 ubuntu kernel: [    4.746847] ata2.00: configured for UDMA/133
Oct 25 19:52:02 ubuntu kernel: [    4.864825] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SR04 PQ: 0 ANSI: 5
Oct 25 19:52:02 ubuntu kernel: [    4.974872] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 25 19:52:02 ubuntu kernel: [    4.974875] cdrom: Uniform CD-ROM driver Revision: 3.20
Oct 25 19:52:02 ubuntu kernel: [    4.974982] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 25 19:52:02 ubuntu kernel: [    4.975051] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 25 19:52:02 ubuntu kernel: [    5.292140] ata6: SATA link down (SStatus 0 SControl 300)
Oct 25 19:52:02 ubuntu kernel: [    5.292625] wmi: Mapper loaded
Oct 25 19:52:02 ubuntu kernel: [    5.294444] Initializing USB Mass Storage driver...
Oct 25 19:52:02 ubuntu kernel: [    5.294916] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 25 19:52:02 ubuntu kernel: [    5.296043] usb 2-6: new high speed USB device number 4 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [    5.297917] [drm] Initialized drm 1.1.0 20060810
Oct 25 19:52:02 ubuntu kernel: [    5.304055] scsi6 : usb-storage 2-4:1.0
Oct 25 19:52:02 ubuntu kernel: [    5.305952] usbcore: registered new interface driver usb-storage
Oct 25 19:52:02 ubuntu kernel: [    5.305956] USB Mass Storage support registered.
Oct 25 19:52:02 ubuntu kernel: [    5.306938] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 25 19:52:02 ubuntu kernel: [    5.306946] nouveau 0000:01:00.0: setting latency timer to 64
Oct 25 19:52:02 ubuntu kernel: [    5.309096] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298480a2)
Oct 25 19:52:02 ubuntu kernel: [    5.315317] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Oct 25 19:52:02 ubuntu kernel: [    5.360305] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
Oct 25 19:52:02 ubuntu kernel: [    5.360501] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
Oct 25 19:52:02 ubuntu kernel: [    5.360539] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 25 19:52:02 ubuntu kernel: [    5.360573] sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 25 19:52:02 ubuntu kernel: [    5.360624] mmc0: no vmmc regulator found
Oct 25 19:52:02 ubuntu kernel: [    5.360657] Registered led device: mmc0::
Oct 25 19:52:02 ubuntu kernel: [    5.360960] mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
Oct 25 19:52:02 ubuntu kernel: [    5.409169] [drm] nouveau 0000:01:00.0: ... appears to be valid
Oct 25 19:52:02 ubuntu kernel: [    5.409173] [drm] nouveau 0000:01:00.0: BIT BIOS found
Oct 25 19:52:02 ubuntu kernel: [    5.409177] [drm] nouveau 0000:01:00.0: Bios version 62.98.4d.00
Oct 25 19:52:02 ubuntu kernel: [    5.409180] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
Oct 25 19:52:02 ubuntu kernel: [    5.409183] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Oct 25 19:52:02 ubuntu kernel: [    5.409187] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
Oct 25 19:52:02 ubuntu kernel: [    5.409190] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
Oct 25 19:52:02 ubuntu kernel: [    5.409192] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
Oct 25 19:52:02 ubuntu kernel: [    5.409195] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000
Oct 25 19:52:02 ubuntu kernel: [    5.409198] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
Oct 25 19:52:02 ubuntu kernel: [    5.409201] [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
Oct 25 19:52:02 ubuntu kernel: [    5.409204] [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
Oct 25 19:52:02 ubuntu kernel: [    5.409207] [drm] nouveau 0000:01:00.0:   2: 0x00002261: type 0x61 idx 2 tag 0x08
Oct 25 19:52:02 ubuntu kernel: [    5.409210] [drm] nouveau 0000:01:00.0:   3: 0x00000310: type 0x10 idx 3 tag 0xff
Oct 25 19:52:02 ubuntu kernel: [    5.409213] [drm] nouveau 0000:01:00.0:   4: 0x00000311: type 0x11 idx 4 tag 0xff
Oct 25 19:52:02 ubuntu kernel: [    5.409215] [drm] nouveau 0000:01:00.0:   5: 0x00000313: type 0x13 idx 5 tag 0xff
Oct 25 19:52:02 ubuntu kernel: [    5.409221] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD979
Oct 25 19:52:02 ubuntu kernel: [    5.434363] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDD4E
Oct 25 19:52:02 ubuntu kernel: [    5.440680] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE62D
Oct 25 19:52:02 ubuntu kernel: [    5.440691] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE71F
Oct 25 19:52:02 ubuntu kernel: [    5.440912] hub 2-6:1.0: USB hub found
Oct 25 19:52:02 ubuntu kernel: [    5.441007] hub 2-6:1.0: 3 ports detected
Oct 25 19:52:02 ubuntu kernel: [    5.441771] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE92B
Oct 25 19:52:02 ubuntu kernel: [    5.441774] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE990
Oct 25 19:52:02 ubuntu kernel: [    5.461618] [drm] nouveau 0000:01:00.0: 0xE990: Condition still not met after 20ms, skipping following opcodes
Oct 25 19:52:02 ubuntu kernel: [    5.480932] [drm] nouveau 0000:01:00.0: 4 available performance level(s)
Oct 25 19:52:02 ubuntu kernel: [    5.480937] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 900mV fanspeed 100% timing 4
Oct 25 19:52:02 ubuntu kernel: [    5.480942] [drm] nouveau 0000:01:00.0: 1: memory 250MHz core 275MHz shader 550MHz voltage 900mV fanspeed 100% timing 1
Oct 25 19:52:02 ubuntu kernel: [    5.480947] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1090mV fanspeed 100% timing 2
Oct 25 19:52:02 ubuntu kernel: [    5.480951] [drm] nouveau 0000:01:00.0: 3: memory 400MHz core 580MHz shader 1450MHz voltage 1170mV fanspeed 100% timing 5
Oct 25 19:52:02 ubuntu kernel: [    5.480971] [drm] nouveau 0000:01:00.0: Register 0x00004030 not found in PLL limits table
Oct 25 19:52:02 ubuntu kernel: [    5.480977] [drm] nouveau 0000:01:00.0: c: memory 249MHz core 275MHz shader 550MHz voltage 900mV
Oct 25 19:52:02 ubuntu kernel: [    5.481087] [TTM] Zone  kernel: Available graphics memory: 2029314 kiB.
Oct 25 19:52:02 ubuntu kernel: [    5.481089] [TTM] Initializing pool allocator.
Oct 25 19:52:02 ubuntu kernel: [    5.481108] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
Oct 25 19:52:02 ubuntu kernel: [    5.485805] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Oct 25 19:52:02 ubuntu kernel: [    5.520964] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
Oct 25 19:52:02 ubuntu kernel: [    5.522465] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 25 19:52:02 ubuntu kernel: [    5.522468] [drm] No driver support for vblank timestamp query.
Oct 25 19:52:02 ubuntu kernel: [    5.712146] usb 2-6.1: new low speed USB device number 5 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [    5.750874] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40000000, bo ffff8801387bfc00
Oct 25 19:52:02 ubuntu kernel: [    5.750943] fbcon: nouveaufb (fb0) is primary device
Oct 25 19:52:02 ubuntu kernel: [    5.822337] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input5
Oct 25 19:52:02 ubuntu kernel: [    5.822502] generic-usb 0003:0B39:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input0
Oct 25 19:52:02 ubuntu kernel: [    5.826852] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.1/input/input6
Oct 25 19:52:02 ubuntu kernel: [    5.827040] generic-usb 0003:0B39:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input1
Oct 25 19:52:02 ubuntu kernel: [    5.827196] usbcore: registered new interface driver usbhid
Oct 25 19:52:02 ubuntu kernel: [    5.827198] usbhid: USB HID core driver
Oct 25 19:52:02 ubuntu kernel: [    5.860130] firewire_core: created device fw0: GUID ffffffffffffffff, S400
Oct 25 19:52:02 ubuntu kernel: [    5.884147] usb 2-6.2: new low speed USB device number 6 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [    5.991281] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input7
Oct 25 19:52:02 ubuntu kernel: [    5.991452] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input0
Oct 25 19:52:02 ubuntu kernel: [    5.994543] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input8
Oct 25 19:52:02 ubuntu kernel: [    5.994643] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input1
Oct 25 19:52:02 ubuntu kernel: [    6.055176] Console: switching to colour frame buffer device 160x50
Oct 25 19:52:02 ubuntu kernel: [    6.057517] fb0: nouveaufb frame buffer device
Oct 25 19:52:02 ubuntu kernel: [    6.057519] drm: registered panic notifier
Oct 25 19:52:02 ubuntu kernel: [    6.057527] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Oct 25 19:52:02 ubuntu kernel: [    6.304664] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 PQ: 0 ANSI: 2
Oct 25 19:52:02 ubuntu kernel: [    6.360269] sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 25 19:52:02 ubuntu kernel: [    6.360767] sd 6:0:0:0: [sdb] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
Oct 25 19:52:02 ubuntu kernel: [    6.361907] sd 6:0:0:0: [sdb] Write Protect is off
Oct 25 19:52:02 ubuntu kernel: [    6.361911] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Oct 25 19:52:02 ubuntu kernel: [    6.362653] sd 6:0:0:0: [sdb] No Caching mode page present
Oct 25 19:52:02 ubuntu kernel: [    6.362656] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Oct 25 19:52:02 ubuntu kernel: [    6.365515] sd 6:0:0:0: [sdb] No Caching mode page present
Oct 25 19:52:02 ubuntu kernel: [    6.365519] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Oct 25 19:52:02 ubuntu kernel: [    6.366283]  sdb: sdb1
Oct 25 19:52:02 ubuntu kernel: [    6.368780] sd 6:0:0:0: [sdb] No Caching mode page present
Oct 25 19:52:02 ubuntu kernel: [    6.368784] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Oct 25 19:52:02 ubuntu kernel: [    6.368788] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Oct 25 19:52:02 ubuntu kernel: [    6.710849] Btrfs loaded
Oct 25 19:52:02 ubuntu kernel: [    6.716913] xor: automatically using best checksumming function: generic_sse
Oct 25 19:52:02 ubuntu kernel: [    6.736010]    generic_sse:  7627.000 MB/sec
Oct 25 19:52:02 ubuntu kernel: [    6.736013] xor: using function: generic_sse (7627.000 MB/sec)
Oct 25 19:52:02 ubuntu kernel: [    6.736675] device-mapper: dm-raid45: initialized v0.2594b
Oct 25 19:52:02 ubuntu kernel: [    7.085505] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 19:52:02 ubuntu kernel: [    7.257336] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 19:52:02 ubuntu kernel: [    7.402821] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Oct 25 19:52:02 ubuntu kernel: [    7.583430] EXT3-fs: barriers not enabled
Oct 25 19:52:02 ubuntu kernel: [    7.596191] kjournald starting.  Commit interval 5 seconds
Oct 25 19:52:02 ubuntu kernel: [    7.596217] EXT3-fs (sda8): mounted filesystem with ordered data mode
Oct 25 19:52:02 ubuntu kernel: [    7.706164] ISO 9660 Extensions: Microsoft Joliet Level 3
Oct 25 19:52:02 ubuntu kernel: [    7.709039] ISO 9660 Extensions: RRIP_1991A
Oct 25 19:52:02 ubuntu kernel: [    7.776389] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Oct 25 19:52:02 ubuntu kernel: [   12.316149] usb 2-6.3: new high speed USB device number 7 using ehci_hcd
Oct 25 19:52:02 ubuntu kernel: [   12.414603] scsi7 : usb-storage 2-6.3:1.0
Oct 25 19:52:02 ubuntu kernel: [   13.412790] scsi 7:0:0:0: Direct-Access     Seagate  FreeAgent Go     0148 PQ: 0 ANSI: 4
Oct 25 19:52:02 ubuntu kernel: [   13.548346] sd 7:0:0:0: Attached scsi generic sg3 type 0
Oct 25 19:52:02 ubuntu kernel: [   13.549922] sd 7:0:0:0: [sdc] 625142447 512-byte logical blocks: (320 GB/298 GiB)
Oct 25 19:52:02 ubuntu kernel: [   13.550397] sd 7:0:0:0: [sdc] Write Protect is off
Oct 25 19:52:02 ubuntu kernel: [   13.550401] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
Oct 25 19:52:02 ubuntu kernel: [   13.550900] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 25 19:52:02 ubuntu kernel: [   13.610650]  sdc: unknown partition table
Oct 25 19:52:02 ubuntu kernel: [   13.612783] sd 7:0:0:0: [sdc] Attached SCSI disk
Oct 25 19:52:02 ubuntu kernel: [   18.625774] Adding 273100k swap on /dev/sda2.  Priority:-1 extents:1 across:273100k 
Oct 25 19:52:02 ubuntu kernel: [   19.231479] asus_laptop: Asus Laptop Support version 0.42
Oct 25 19:52:02 ubuntu kernel: [   19.231620] asus_laptop:   N80Vb model detected
Oct 25 19:52:02 ubuntu kernel: [   19.231948] asus_laptop: Backlight controlled by ACPI video driver
Oct 25 19:52:02 ubuntu kernel: [   19.232283] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input9
Oct 25 19:52:02 ubuntu kernel: [   19.257027] r8169 0000:06:00.0: eth0: link down
Oct 25 19:52:02 ubuntu kernel: [   19.276606] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 19:52:02 ubuntu kernel: [   19.299297] cfg80211: Calling CRDA to update world regulatory domain
Oct 25 19:52:02 ubuntu kernel: [   19.332976] ite_cir: Auto-detected model: ITE8708 CIR transceiver
Oct 25 19:52:02 ubuntu kernel: [   19.332981] ite_cir: Using model: ITE8708 CIR transceiver
Oct 25 19:52:02 ubuntu kernel: [   19.333021] ite_cir: TX-capable: 1
Oct 25 19:52:02 ubuntu kernel: [   19.333022] ite_cir: Sample period (ns): 8680
Oct 25 19:52:02 ubuntu kernel: [   19.333024] ite_cir: TX carrier frequency (Hz): 38000
Oct 25 19:52:02 ubuntu kernel: [   19.333026] ite_cir: TX duty cycle (%): 33
Oct 25 19:52:02 ubuntu kernel: [   19.333028] ite_cir: RX low carrier frequency (Hz): 0
Oct 25 19:52:02 ubuntu kernel: [   19.333029] ite_cir: RX high carrier frequency (Hz): 0
Oct 25 19:52:02 ubuntu kernel: [   19.345215] IR NEC protocol handler initialized
Oct 25 19:52:02 ubuntu kernel: [   19.367166] IR RC5(x) protocol handler initialized
Oct 25 19:52:02 ubuntu kernel: [   19.410903] IR RC6 protocol handler initialized
Oct 25 19:52:02 ubuntu kernel: [   19.444033] Registered IR keymap rc-rc6-mce
Oct 25 19:52:02 ubuntu kernel: [   19.444152] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input10
Oct 25 19:52:02 ubuntu kernel: [   19.444264] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
Oct 25 19:52:02 ubuntu kernel: [   19.444314] ite_cir: driver has been successfully loaded
Oct 25 19:52:02 ubuntu kernel: [   19.452585] IR JVC protocol handler initialized
Oct 25 19:52:03 ubuntu kernel: [   19.471868] IR Sony protocol handler initialized
Oct 25 19:52:03 ubuntu kernel: [   19.498733] lirc_dev: IR Remote Control driver registered, major 249 
Oct 25 19:52:03 ubuntu kernel: [   19.511820] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
Oct 25 19:52:03 ubuntu kernel: [   19.511824] IR LIRC bridge handler initialized
Oct 25 19:52:03 ubuntu kernel: [   19.603650] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 25 19:52:03 ubuntu kernel: [   19.603654] iwlagn: Copyright(c) 2003-2011 Intel Corporation
Oct 25 19:52:03 ubuntu kernel: [   19.603747] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 25 19:52:03 ubuntu kernel: [   19.603756] iwlagn 0000:03:00.0: setting latency timer to 64
Oct 25 19:52:03 ubuntu kernel: [   19.603793] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
Oct 25 19:52:03 ubuntu kernel: [   19.621539] r852 0000:07:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 25 19:52:03 ubuntu kernel: [   19.625861] iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
Oct 25 19:52:03 ubuntu kernel: [   19.625865] iwlagn 0000:03:00.0: Device SKU: 0Xb
Oct 25 19:52:03 ubuntu kernel: [   19.626099] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Oct 25 19:52:03 ubuntu kernel: [   19.626193] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
Oct 25 19:52:03 ubuntu kernel: [   19.628393] r852: driver loaded successfully
Oct 25 19:52:03 ubuntu kernel: [   19.649338] cfg80211: World regulatory domain updated:
Oct 25 19:52:03 ubuntu kernel: [   19.649342] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 25 19:52:03 ubuntu kernel: [   19.649345] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 25 19:52:03 ubuntu kernel: [   19.649348] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 25 19:52:03 ubuntu kernel: [   19.649351] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 25 19:52:03 ubuntu kernel: [   19.649353] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 25 19:52:03 ubuntu kernel: [   19.649356] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 25 19:52:03 ubuntu kernel: [   19.773262] Linux video capture interface: v2.00
Oct 25 19:52:03 ubuntu kernel: [   19.852557] init: failsafe main process (1585) killed by TERM signal
Oct 25 19:52:03 ubuntu kernel: [   19.871688] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
Oct 25 19:52:03 ubuntu kernel: [   19.872055] Registered led device: phy0-led
Oct 25 19:52:03 ubuntu kernel: [   19.872089] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
Oct 25 19:52:03 ubuntu kernel: [   19.969076] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:8a34)
Oct 25 19:52:03 ubuntu kernel: [   19.990541] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Oct 25 19:52:03 ubuntu kernel: [   20.047591] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Oct 25 19:52:03 ubuntu kernel: [   20.053974] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
Oct 25 19:52:03 ubuntu kernel: [   20.070792] usbcore: registered new interface driver uvcvideo
Oct 25 19:52:03 ubuntu kernel: [   20.070796] USB Video Class driver (v1.1.0)
Oct 25 19:52:03 ubuntu kernel: [   20.095909] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
Oct 25 19:52:03 ubuntu kernel: [   20.359997] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 25 19:52:03 ubuntu kernel: [   20.382537] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 25 19:52:03 ubuntu kernel: [   20.382615] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Oct 25 19:52:03 ubuntu kernel: [   20.382916] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 25 19:52:04 ubuntu kernel: [   20.496160] Bluetooth: Core ver 2.16
Oct 25 19:52:04 ubuntu kernel: [   20.496187] NET: Registered protocol family 31
Oct 25 19:52:04 ubuntu kernel: [   20.496188] Bluetooth: HCI device and connection manager initialized
Oct 25 19:52:04 ubuntu kernel: [   20.496191] Bluetooth: HCI socket layer initialized
Oct 25 19:52:04 ubuntu kernel: [   20.496193] Bluetooth: L2CAP socket layer initialized
Oct 25 19:52:04 ubuntu kernel: [   20.499375] Bluetooth: SCO socket layer initialized
Oct 25 19:52:04 ubuntu kernel: [   20.524613] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Oct 25 19:52:04 ubuntu kernel: [   20.524809] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Oct 25 19:52:04 ubuntu kernel: [   20.532046] Bluetooth: RFCOMM TTY layer initialized
Oct 25 19:52:04 ubuntu kernel: [   20.532054] Bluetooth: RFCOMM socket layer initialized
Oct 25 19:52:04 ubuntu kernel: [   20.532056] Bluetooth: RFCOMM ver 1.11
Oct 25 19:52:04 ubuntu kernel: [   20.544985] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 25 19:52:04 ubuntu kernel: [   20.544989] Bluetooth: BNEP filters: protocol multicast
Oct 25 19:52:04 ubuntu kernel: [   21.205355] lp: driver loaded but no devices found
Oct 25 19:52:04 ubuntu kernel: [   21.247818] ppdev: user-space parallel port driver
Oct 25 19:53:45 ubuntu kernel: [  122.201370] wlan0: authenticate with 02:1a:11:f7:51:6d (try 1)
Oct 25 19:53:45 ubuntu kernel: [  122.204090] wlan0: authenticated
Oct 25 19:53:45 ubuntu kernel: [  122.208237] wlan0: associate with 02:1a:11:f7:51:6d (try 1)
Oct 25 19:53:45 ubuntu kernel: [  122.211924] wlan0: RX AssocResp from 02:1a:11:f7:51:6d (capab=0x401 status=0 aid=1)
Oct 25 19:53:45 ubuntu kernel: [  122.211930] wlan0: associated
Oct 25 19:53:45 ubuntu kernel: [  122.215979] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 25 19:53:56 ubuntu kernel: [  132.992019] wlan0: no IPv6 routers present
Oct 25 20:45:37 ubuntu kernel: [ 3241.900548] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

Offline

#10 2011-10-25 21:07:35

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

so firstly is loading nouveau, which is impossible since nvidia package backlisted it

paste the output of bsdtar -t -f /boot/initramfs-linux.img

Give what you have. To someone, it may be better than you dare to think.

Offline

#11 2011-10-25 21:09:44

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

Hmm, as I say, I'm no expert on these things, so maybe I'm missing the mark completely. Still, it looks fishy to me that Xorg is talking about the version of an nvidia module, but the kernel is loading nouveau instead.

Maybe someone who knows more will correct me, but if it was me, I would try loading in the proprietary nvidia blob and blacklist nouveau.

Offline

#12 2011-10-25 21:11:34

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

This is the output of the bsdtar command:

.
./hooks
./hooks/udev
./bin
./bin/busybox
./init
./config
./usr
./usr/bin
./usr/sbin
./run
./proc
./sbin
./sbin/blkid
./sbin/udevd
./sbin/udevadm
./sbin/modprobe
./etc
./etc/udev
./etc/udev/udev.conf
./lib
./lib/librt-2.14.so
./lib/libpthread.so.0
./lib/udev
./lib/udev/usb_id
./lib/udev/rules.d
./lib/udev/rules.d/50-udev-default.rules
./lib/udev/rules.d/80-drivers.rules
./lib/udev/rules.d/50-firmware.rules
./lib/udev/rules.d/60-persistent-storage.rules
./lib/udev/ata_id
./lib/udev/path_id
./lib/udev/scsi_id
./lib/udev/firmware
./lib/libc.so.6
./lib/ld-2.14.so
./lib/libpthread-2.14.so
./lib/modprobe.d
./lib/modprobe.d/usb-load-ehci-first.conf
./lib/libblkid.so.1.1.0
./lib/libc-2.14.so
./lib/modules
./lib/modules/3.0-ARCH
./lib/modules/3.0-ARCH/modules.symbols.bin
./lib/modules/3.0-ARCH/kernel
./lib/modules/3.0-ARCH/kernel/lib
./lib/modules/3.0-ARCH/kernel/lib/crc16.ko.gz
./lib/modules/3.0-ARCH/kernel/fs
./lib/modules/3.0-ARCH/kernel/fs/mbcache.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/jbd2
./lib/modules/3.0-ARCH/kernel/fs/jbd2/jbd2.ko.gz
./lib/modules/3.0-ARCH/kernel/fs/ext4
./lib/modules/3.0-ARCH/kernel/fs/ext4/ext4.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers
./lib/modules/3.0-ARCH/kernel/drivers/video
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight
./lib/modules/3.0-ARCH/kernel/drivers/video/backlight/lcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysimgblt.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/fb_sys_fops.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/sysfillrect.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/video/syscopyarea.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb
./lib/modules/3.0-ARCH/kernel/drivers/usb/core
./lib/modules/3.0-ARCH/kernel/drivers/usb/core/usbcore.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/usb/host/uhci-hcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-prodikeys.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid
./lib/modules/3.0-ARCH/kernel/drivers/hid/usbhid/usbhid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kone.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gaff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-gyration.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zpff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-wacom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-chicony.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-dr.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sunplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cherry.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-sjoy.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-lcpower.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-logitech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-picolcd.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-monterey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-uclogic.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-twinhan.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-kovaplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-multitouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-apple.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-pyra.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-elecom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-emsff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-koneplus.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kensington.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-arvo.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-tmff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-waltop.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-pl.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-axff.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ezkey.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-quanta.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-petalynx.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-microsoft.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-cypress.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-a4tech.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ntrig.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-kye.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-belkin.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-magicmouse.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-zydacron.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-samsung.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-topseed.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-roccat-common.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-keytouch.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/hid/hid-ortek.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata
./lib/modules/3.0-ARCH/kernel/drivers/ata/libata.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/libahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/ata/ahci.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi
./lib/modules/3.0-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sd_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/scsi/sr_mod.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/cdrom
./lib/modules/3.0-ARCH/kernel/drivers/cdrom/cdrom.ko.gz
./lib/modules/3.0-ARCH/kernel/drivers/input
./lib/modules/3.0-ARCH/kernel/drivers/input/ff-memless.ko.gz
./lib/modules/3.0-ARCH/kernel/sound
./lib/modules/3.0-ARCH/kernel/sound/core
./lib/modules/3.0-ARCH/kernel/sound/core/snd.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/snd-rawmidi.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/core/seq
./lib/modules/3.0-ARCH/kernel/sound/core/seq/snd-seq-device.ko.gz
./lib/modules/3.0-ARCH/kernel/sound/soundcore.ko.gz
./lib/modules/3.0-ARCH/modules.dep.bin
./lib/modules/3.0-ARCH/modules.alias.bin
./lib/libuuid.so.1.3.0
./lib/libuuid.so.1
./lib/libblkid.so.1
./lib/ld-linux-x86-64.so.2
./lib/librt.so.1
./dev
./sys
./init_functions

Last edited by c0dege3k (2011-10-25 21:14:48)

Offline

#13 2011-10-25 21:13:13

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

I don't understand.

Edit: never mind, I didn't see Wonder's post. It is all clear now.

Last edited by /dev/zero (2011-10-25 21:15:16)

Offline

#14 2011-10-25 21:30:24

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

i don't see nouveau there

paste
ls /etc/modprobe.d/
dmesg (after trying to start X)
cat /etc/X11/xorg.conf

also be sure you rebooted after installing nvidia

Give what you have. To someone, it may be better than you dare to think.

Offline

#15 2011-10-25 21:32:29

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

output of ls:

alsa-base.conf             blacklist-framebuffer.conf
blacklist-ath_pci.conf     blacklist-modem.conf
blacklist.conf             blacklist-oss.conf
blacklist-cups-usblp.conf  blacklist-rare-network.conf
blacklist-firewire.conf    blacklist-watchdog.conf

I'll get the other piece in just a bit (I'm running a LiveUSB of Ubuntu right now)

Offline

#16 2011-10-25 21:52:01

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

c0dege3k wrote:

I'm running a LiveUSB of Ubuntu right now

The kernel log you provided also mentioned Ubuntu.

Are you sure you gave us the log for the correct kernel?

When Xorg bails out, are you able to access a command line using say Ctl-Alt-F1, and give us the kernel log from within the environment you actually want to run?

Offline

#17 2011-10-25 21:56:22

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

/dev/zero wrote:
c0dege3k wrote:

I'm running a LiveUSB of Ubuntu right now

The kernel log you provided also mentioned Ubuntu.

Are you sure you gave us the log for the correct kernel?

When Xorg bails out, are you able to access a command line using say Ctl-Alt-F1, and give us the kernel log from within the environment you actually want to run?

Oops, you were right- I accidentally loaded the Ubuntu one- here's the one from Arch:

s scan disabled
Oct 24 14:45:49 localhost kernel: [    0.817575] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
Oct 24 14:45:49 localhost kernel: [    0.817579] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
Oct 24 14:45:49 localhost kernel: [    0.817585] ahci 0000:00:1f.2: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.830640] scsi0 : ahci
Oct 24 14:45:49 localhost kernel: [    0.830758] scsi1 : ahci
Oct 24 14:45:49 localhost kernel: [    0.830834] scsi2 : ahci
Oct 24 14:45:49 localhost kernel: [    0.830908] scsi3 : ahci
Oct 24 14:45:49 localhost kernel: [    0.830981] scsi4 : ahci
Oct 24 14:45:49 localhost kernel: [    0.831054] scsi5 : ahci
Oct 24 14:45:49 localhost kernel: [    0.831318] ata1: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff100 irq 45
Oct 24 14:45:49 localhost kernel: [    0.831322] ata2: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff180 irq 45
Oct 24 14:45:49 localhost kernel: [    0.831325] ata3: DUMMY
Oct 24 14:45:49 localhost kernel: [    0.831326] ata4: DUMMY
Oct 24 14:45:49 localhost kernel: [    0.831327] ata5: DUMMY
Oct 24 14:45:49 localhost kernel: [    0.831330] ata6: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff380 irq 45
Oct 24 14:45:49 localhost kernel: [    0.849857] uhci_hcd: USB Universal Host Controller Interface driver
Oct 24 14:45:49 localhost kernel: [    0.849910] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 24 14:45:49 localhost kernel: [    0.849922] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.849927] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.849941] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct 24 14:45:49 localhost kernel: [    0.849991] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
Oct 24 14:45:49 localhost kernel: [    0.850183] hub 3-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.850187] hub 3-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    0.850279] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 24 14:45:49 localhost kernel: [    0.850286] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.850290] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.850298] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct 24 14:45:49 localhost kernel: [    0.850336] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
Oct 24 14:45:49 localhost kernel: [    0.850466] hub 4-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.850471] hub 4-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    0.850542] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 24 14:45:49 localhost kernel: [    0.850549] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.850553] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.850561] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Oct 24 14:45:49 localhost kernel: [    0.850599] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
Oct 24 14:45:49 localhost kernel: [    0.850728] hub 5-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.850732] hub 5-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    0.850804] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 24 14:45:49 localhost kernel: [    0.850811] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.850815] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.850822] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Oct 24 14:45:49 localhost kernel: [    0.850851] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
Oct 24 14:45:49 localhost kernel: [    0.850981] hub 6-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.850985] hub 6-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    0.851056] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 24 14:45:49 localhost kernel: [    0.851063] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.851067] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.851074] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Oct 24 14:45:49 localhost kernel: [    0.851103] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
Oct 24 14:45:49 localhost kernel: [    0.851231] hub 7-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.851235] hub 7-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    0.851310] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 24 14:45:49 localhost kernel: [    0.851318] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    0.851322] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 24 14:45:49 localhost kernel: [    0.851329] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Oct 24 14:45:49 localhost kernel: [    0.851358] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
Oct 24 14:45:49 localhost kernel: [    0.851482] hub 8-0:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    0.851487] hub 8-0:1.0: 2 ports detected
Oct 24 14:45:49 localhost kernel: [    1.123359] usb 2-5: new high speed USB device number 2 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    1.150035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 24 14:45:49 localhost kernel: [    1.150994] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 24 14:45:49 localhost kernel: [    1.151046] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 24 14:45:49 localhost kernel: [    1.151050] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 24 14:45:49 localhost kernel: [    1.151378] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
Oct 24 14:45:49 localhost kernel: [    1.151381] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Oct 24 14:45:49 localhost kernel: [    1.151994] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 24 14:45:49 localhost kernel: [    1.152043] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 24 14:45:49 localhost kernel: [    1.152046] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 24 14:45:49 localhost kernel: [    1.152373] ata1.00: configured for UDMA/133
Oct 24 14:45:49 localhost kernel: [    1.152554] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
Oct 24 14:45:49 localhost kernel: [    1.410020] Refined TSC clocksource calibration: 1994.999 MHz.
Oct 24 14:45:49 localhost kernel: [    1.410025] Switching to clocksource tsc
Oct 24 14:45:49 localhost kernel: [    1.470022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 24 14:45:49 localhost kernel: [    1.479241] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 24 14:45:49 localhost kernel: [    1.479245] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 24 14:45:49 localhost kernel: [    1.482925] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SR04, max UDMA/133
Oct 24 14:45:49 localhost kernel: [    1.488759] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 24 14:45:49 localhost kernel: [    1.488763] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 24 14:45:49 localhost kernel: [    1.492448] ata2.00: configured for UDMA/133
Oct 24 14:45:49 localhost kernel: [    1.602115] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SR04 PQ: 0 ANSI: 5
Oct 24 14:45:49 localhost kernel: [    1.910019] usb 2-6: new high speed USB device number 3 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    1.920026] ata6: SATA link down (SStatus 0 SControl 300)
Oct 24 14:45:49 localhost kernel: [    1.926835] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 24 14:45:49 localhost kernel: [    1.926891] sd 0:0:0:0: [sda] Write Protect is off
Oct 24 14:45:49 localhost kernel: [    1.926894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 24 14:45:49 localhost kernel: [    1.926917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 24 14:45:49 localhost kernel: [    2.027339]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Oct 24 14:45:49 localhost kernel: [    2.027915] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 24 14:45:49 localhost kernel: [    2.045663] hub 2-6:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    2.045733] hub 2-6:1.0: 3 ports detected
Oct 24 14:45:49 localhost kernel: [    2.047009] usb 2-6: USB disconnect, device number 3
Oct 24 14:45:49 localhost kernel: [    2.142251] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 24 14:45:49 localhost kernel: [    2.142256] cdrom: Uniform CD-ROM driver Revision: 3.20
Oct 24 14:45:49 localhost kernel: [    2.142577] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 24 14:45:49 localhost kernel: [    2.413357] usb 2-6: new high speed USB device number 4 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    2.545393] hub 2-6:1.0: USB hub found
Oct 24 14:45:49 localhost kernel: [    2.545484] hub 2-6:1.0: 3 ports detected
Oct 24 14:45:49 localhost kernel: [    2.810118] usb 2-6.1: new low speed USB device number 5 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    2.911017] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input1
Oct 24 14:45:49 localhost kernel: [    2.911096] generic-usb 0003:0B39:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input0
Oct 24 14:45:49 localhost kernel: [    2.915286] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.1/input/input2
Oct 24 14:45:49 localhost kernel: [    2.915367] generic-usb 0003:0B39:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input1
Oct 24 14:45:49 localhost kernel: [    2.915386] usbcore: registered new interface driver usbhid
Oct 24 14:45:49 localhost kernel: [    2.915388] usbhid: USB HID core driver
Oct 24 14:45:49 localhost kernel: [    2.970122] usb 2-6.2: new low speed USB device number 6 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    3.066954] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input3
Oct 24 14:45:49 localhost kernel: [    3.067071] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input0
Oct 24 14:45:49 localhost kernel: [    3.070548] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input4
Oct 24 14:45:49 localhost kernel: [    3.070645] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input1
Oct 24 14:45:49 localhost kernel: [    3.150042] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Oct 24 14:45:49 localhost kernel: [    5.229339] vboxdrv: Found 2 processor cores.
Oct 24 14:45:49 localhost kernel: [    5.229410] VBoxDrv: dbg - g_abExecMemory=ffffffffa01c6b20
Oct 24 14:45:49 localhost kernel: [    5.229432] vboxdrv: fAsync=0 offMin=0x186 offMax=0x19d2
Oct 24 14:45:49 localhost kernel: [    5.229481] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Oct 24 14:45:49 localhost kernel: [    5.229483] vboxdrv: Successfully loaded version 4.1.2_OSE (interface 0x00190000).
Oct 24 14:45:49 localhost kernel: [    5.669421] iTCO_vendor_support: vendor-support=0
Oct 24 14:45:49 localhost kernel: [    5.688443] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Oct 24 14:45:49 localhost kernel: [    5.688569] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Oct 24 14:45:49 localhost kernel: [    5.688644] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 24 14:45:49 localhost kernel: [    5.706667] acpi device:1d: registered as cooling_device0
Oct 24 14:45:49 localhost kernel: [    5.706785] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input5
Oct 24 14:45:49 localhost kernel: [    5.706794] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Oct 24 14:45:49 localhost kernel: [    5.790904] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
Oct 24 14:45:49 localhost kernel: [    5.790913] ACPI: Sleep Button [SLPB]
Oct 24 14:45:49 localhost kernel: [    5.790969] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
Oct 24 14:45:49 localhost kernel: [    5.791455] ACPI: Battery Slot [BAT0] (battery absent)
Oct 24 14:45:49 localhost kernel: [    5.791994] ACPI: AC Adapter [AC0] (on-line)
Oct 24 14:45:49 localhost kernel: [    5.792354] ACPI: acpi_idle registered with cpuidle
Oct 24 14:45:49 localhost kernel: [    5.793114] Monitor-Mwait will be used to enter C-1 state
Oct 24 14:45:49 localhost kernel: [    5.793149] Monitor-Mwait will be used to enter C-3 state
Oct 24 14:45:49 localhost kernel: [    5.793165] Marking TSC unstable due to TSC halts in idle
Oct 24 14:45:49 localhost kernel: [    5.793220] Switching to clocksource hpet
Oct 24 14:45:49 localhost kernel: [    5.797180] ACPI: Lid Switch [LID]
Oct 24 14:45:49 localhost kernel: [    5.798391] thermal LNXTHERM:00: registered as thermal_zone0
Oct 24 14:45:49 localhost kernel: [    5.798395] ACPI: Thermal Zone [THRM] (35 C)
Oct 24 14:45:49 localhost kernel: [    5.802376] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
Oct 24 14:45:49 localhost kernel: [    5.802384] ACPI: Power Button [PWRF]
Oct 24 14:45:49 localhost kernel: [    5.807922] cfg80211: Calling CRDA to update world regulatory domain
Oct 24 14:45:49 localhost kernel: [    5.817900] asus_acpi: Asus Laptop ACPI Extras version 0.30
Oct 24 14:45:49 localhost kernel: [    5.818044] asus_acpi:   unsupported model N80Vb, trying default values
Oct 24 14:45:49 localhost kernel: [    5.818046] asus_acpi:   send /proc/acpi/dsdt to the developers
Oct 24 14:45:49 localhost kernel: [    5.818255] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 24 14:45:49 localhost kernel: [    5.824946] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 24 14:45:49 localhost kernel: [    5.824968] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 24 14:45:49 localhost kernel: [    5.825021] r8169 0000:06:00.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    5.825093] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
Oct 24 14:45:49 localhost kernel: [    5.825330] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc90000670000, 26:6d:e0:c1:12:00, XID 1c4000c0 IRQ 46
Oct 24 14:45:49 localhost kernel: [    5.866962] ite_cir: Auto-detected model: ITE8708 CIR transceiver
Oct 24 14:45:49 localhost kernel: [    5.866966] ite_cir: Using model: ITE8708 CIR transceiver
Oct 24 14:45:49 localhost kernel: [    5.866986] ite_cir: TX-capable: 1
Oct 24 14:45:49 localhost kernel: [    5.866988] ite_cir: Sample period (ns): 8680
Oct 24 14:45:49 localhost kernel: [    5.866990] ite_cir: TX carrier frequency (Hz): 38000
Oct 24 14:45:49 localhost kernel: [    5.866992] ite_cir: TX duty cycle (%): 33
Oct 24 14:45:49 localhost kernel: [    5.866993] ite_cir: RX low carrier frequency (Hz): 0
Oct 24 14:45:49 localhost kernel: [    5.866995] ite_cir: RX high carrier frequency (Hz): 0
Oct 24 14:45:49 localhost kernel: [    5.880095] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
Oct 24 14:45:49 localhost kernel: [    5.911567] input: PC Speaker as /devices/platform/pcspkr/input/input9
Oct 24 14:45:49 localhost kernel: [    5.913366] Registered IR keymap rc-rc6-mce
Oct 24 14:45:49 localhost kernel: [    5.913500] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input10
Oct 24 14:45:49 localhost kernel: [    5.913528] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
Oct 24 14:45:49 localhost kernel: [    5.913596] ite_cir: driver has been successfully loaded
Oct 24 14:45:49 localhost kernel: [    5.917873] asus_laptop: Asus Laptop Support version 0.42
Oct 24 14:45:49 localhost kernel: [    5.918014] asus_laptop:   N80Vb model detected
Oct 24 14:45:49 localhost kernel: [    5.918051] sdhci: Secure Digital Host Controller Interface driver
Oct 24 14:45:49 localhost kernel: [    5.918053] sdhci: Copyright(c) Pierre Ossman
Oct 24 14:45:49 localhost kernel: [    5.918648] asus_laptop: Backlight controlled by ACPI video driver
Oct 24 14:45:49 localhost kernel: [    5.918716] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input11
Oct 24 14:45:49 localhost kernel: [    5.962544] r592 0000:07:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 24 14:45:49 localhost kernel: [    5.962769] r592: driver successfully loaded
Oct 24 14:45:49 localhost kernel: [    6.025777] r852 0000:07:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 24 14:45:49 localhost kernel: [    6.025876] r852: driver loaded successfully
Oct 24 14:45:49 localhost kernel: [    6.076166] IR NEC protocol handler initialized
Oct 24 14:45:49 localhost kernel: [    6.088635] IR RC5(x) protocol handler initialized
Oct 24 14:45:49 localhost kernel: [    6.168069] IR RC6 protocol handler initialized
Oct 24 14:45:49 localhost kernel: [    6.223262] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
Oct 24 14:45:49 localhost kernel: [    6.223282] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 24 14:45:49 localhost kernel: [    6.224329] sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 24 14:45:49 localhost kernel: [    6.224346] _regulator_get: 0000:07:03.1 supply vmmc not found, using dummy regulator
Oct 24 14:45:49 localhost kernel: [    6.225401] Registered led device: mmc0::
Oct 24 14:45:49 localhost kernel: [    6.229272] mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
Oct 24 14:45:49 localhost kernel: [    6.349935] ir-keytable[443]: segfault at 0 ip 0000000000401bc3 sp 00007fffc90dfec0 error 4 in ir-keytable[400000+7000]
Oct 24 14:45:49 localhost kernel: [    6.382687] firewire_core: created device fw0: GUID ffffffffffffffff, S400
Oct 24 14:45:49 localhost kernel: [    6.383110] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 24 14:45:49 localhost kernel: [    6.384782] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Oct 24 14:45:49 localhost kernel: [    6.384816] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    6.429518] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 24 14:45:49 localhost kernel: [    6.429522] iwlagn: Copyright(c) 2003-2011 Intel Corporation
Oct 24 14:45:49 localhost kernel: [    6.429601] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 24 14:45:49 localhost kernel: [    6.429610] iwlagn 0000:03:00.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    6.429658] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
Oct 24 14:45:49 localhost kernel: [    6.452456] iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
Oct 24 14:45:49 localhost kernel: [    6.452460] iwlagn 0000:03:00.0: Device SKU: 0Xb
Oct 24 14:45:49 localhost kernel: [    6.452470] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Oct 24 14:45:49 localhost kernel: [    6.452550] iwlagn 0000:03:00.0: irq 48 for MSI/MSI-X
Oct 24 14:45:49 localhost kernel: [    6.535076] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
Oct 24 14:45:49 localhost kernel: [    6.535351] Registered led device: phy0-led
Oct 24 14:45:49 localhost kernel: [    6.586821] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Oct 24 14:45:49 localhost kernel: [    6.586997] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 24 14:45:49 localhost kernel: [    6.587250] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 24 14:45:49 localhost kernel: [    6.597074] IR JVC protocol handler initialized
Oct 24 14:45:49 localhost kernel: [    6.609118] IR Sony protocol handler initialized
Oct 24 14:45:49 localhost kernel: [    6.672139] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
Oct 24 14:45:49 localhost kernel: [    6.749705] lirc_dev: IR Remote Control driver registered, major 250 
Oct 24 14:45:49 localhost kernel: [    6.752567] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Oct 24 14:45:49 localhost kernel: [    6.752639] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Oct 24 14:45:49 localhost kernel: [    6.813001] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
Oct 24 14:45:49 localhost kernel: [    6.813005] IR LIRC bridge handler initialized
Oct 24 14:45:49 localhost kernel: [    6.964645] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
Oct 24 14:45:49 localhost kernel: [    7.002921] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input15
Oct 24 14:45:49 localhost kernel: [    7.281408] nvidia: module license 'NVIDIA' taints kernel.
Oct 24 14:45:49 localhost kernel: [    7.281413] Disabling lock debugging due to kernel taint
Oct 24 14:45:49 localhost kernel: [    7.408715] Linux media interface: v0.10
Oct 24 14:45:49 localhost kernel: [    7.415884] Linux video capture interface: v2.00
Oct 24 14:45:49 localhost kernel: [    7.630964] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:8a34)
Oct 24 14:45:49 localhost kernel: [    7.709252] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Oct 24 14:45:49 localhost kernel: [    7.732622] usbcore: registered new interface driver uvcvideo
Oct 24 14:45:49 localhost kernel: [    7.732625] USB Video Class driver (v1.1.0)
Oct 24 14:45:49 localhost kernel: [    8.095651] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 24 14:45:49 localhost kernel: [    8.095662] nvidia 0000:01:00.0: setting latency timer to 64
Oct 24 14:45:49 localhost kernel: [    8.095668] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 24 14:45:49 localhost kernel: [    8.095866] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
Oct 24 14:45:49 localhost kernel: [    9.450140] usb 2-6.3: new high speed USB device number 7 using ehci_hcd
Oct 24 14:45:49 localhost kernel: [    9.583614] EXT4-fs (sda3): re-mounted. Opts: (null)
Oct 24 14:45:49 localhost kernel: [    9.763743] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Oct 24 14:45:49 localhost kernel: [    9.891862] Initializing USB Mass Storage driver...
Oct 24 14:45:49 localhost kernel: [    9.892205] scsi6 : usb-storage 2-6.3:1.0
Oct 24 14:45:49 localhost kernel: [    9.892319] usbcore: registered new interface driver usb-storage
Oct 24 14:45:49 localhost kernel: [    9.892321] USB Mass Storage support registered.
Oct 24 14:45:49 localhost kernel: [    9.893520] usbcore: registered new interface driver uas
Oct 24 14:45:49 localhost kernel: [    9.934499] Adding 273100k swap on /dev/sda2.  Priority:-1 extents:1 across:273100k 
Oct 24 14:45:49 localhost kernel: [   10.890660] scsi 6:0:0:0: Direct-Access     Seagate  FreeAgent Go     0148 PQ: 0 ANSI: 4
Oct 24 14:45:49 localhost kernel: [   10.890885] sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 24 14:45:49 localhost kernel: [   10.891721] sd 6:0:0:0: [sdb] 625142447 512-byte logical blocks: (320 GB/298 GiB)
Oct 24 14:45:49 localhost kernel: [   10.892254] sd 6:0:0:0: [sdb] Write Protect is off
Oct 24 14:45:49 localhost kernel: [   10.892258] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
Oct 24 14:45:49 localhost kernel: [   10.892758] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 24 14:45:49 localhost kernel: [   10.950401]  sdb: unknown partition table
Oct 24 14:45:49 localhost kernel: [   10.953892] sd 6:0:0:0: [sdb] Attached SCSI disk
Oct 24 14:45:53 localhost kernel: [   15.619041] NET: Registered protocol family 10
Oct 24 14:45:56 localhost kernel: [   18.657849] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 24 14:45:56 localhost kernel: [   18.657851] NVRM: this kernel module has the version 280.13.  Please
Oct 24 14:45:56 localhost kernel: [   18.657852] NVRM: make sure that this kernel module and all NVIDIA driver
Oct 24 14:45:56 localhost kernel: [   18.657854] NVRM: components have the same version.
Oct 24 14:45:56 localhost kernel: [   18.764636] NET: Registered protocol family 4
Oct 24 14:45:56 localhost kernel: [   18.790458] NET: Registered protocol family 5
Oct 24 14:45:56 localhost kernel: [   18.956935] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 24 14:46:01 localhost kernel: [   24.052159] r8169 0000:06:00.0: eth0: link down
Oct 24 14:46:01 localhost kernel: [   24.052685] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 24 18:06:35 localhost kernel: [12057.288285] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 24 18:06:35 localhost kernel: [12057.288287] NVRM: this kernel module has the version 280.13.  Please
Oct 24 18:06:35 localhost kernel: [12057.288288] NVRM: make sure that this kernel module and all NVIDIA driver
Oct 24 18:06:35 localhost kernel: [12057.288290] NVRM: components have the same version.
Oct 24 18:06:54 localhost kernel: [12077.094029] device-mapper: uevent: version 1.0.3
Oct 24 18:06:54 localhost kernel: [12077.094216] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Oct 24 18:06:59 localhost kernel: [12081.700301] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 24 18:06:59 localhost kernel: [12081.700303] NVRM: this kernel module has the version 280.13.  Please
Oct 24 18:06:59 localhost kernel: [12081.700304] NVRM: make sure that this kernel module and all NVIDIA driver
Oct 24 18:06:59 localhost kernel: [12081.700306] NVRM: components have the same version.
Oct 24 18:07:07 localhost kernel: [12089.595495] usb 2-4: new high speed USB device number 8 using ehci_hcd
Oct 24 18:07:07 localhost kernel: [12089.721197] scsi7 : usb-storage 2-4:1.0
Oct 24 18:07:08 localhost kernel: [12090.719621] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 PQ: 0 ANSI: 2
Oct 24 18:07:08 localhost kernel: [12090.719836] sd 7:0:0:0: Attached scsi generic sg3 type 0
Oct 24 18:07:08 localhost kernel: [12090.720608] sd 7:0:0:0: [sdc] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB)
Oct 24 18:07:08 localhost kernel: [12090.722106] sd 7:0:0:0: [sdc] Write Protect is off
Oct 24 18:07:08 localhost kernel: [12090.722109] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
Oct 24 18:07:08 localhost kernel: [12090.722859] sd 7:0:0:0: [sdc] No Caching mode page present
Oct 24 18:07:08 localhost kernel: [12090.722950] sd 7:0:0:0: [sdc] Assuming drive cache: write through
Oct 24 18:07:08 localhost kernel: [12090.726105] sd 7:0:0:0: [sdc] No Caching mode page present
Oct 24 18:07:08 localhost kernel: [12090.726195] sd 7:0:0:0: [sdc] Assuming drive cache: write through
Oct 24 18:07:08 localhost kernel: [12090.730622]  sdc: sdc1
Oct 24 18:07:08 localhost kernel: [12090.733345] sd 7:0:0:0: [sdc] No Caching mode page present
Oct 24 18:07:08 localhost kernel: [12090.733434] sd 7:0:0:0: [sdc] Assuming drive cache: write through
Oct 24 18:07:08 localhost kernel: [12090.733523] sd 7:0:0:0: [sdc] Attached SCSI removable disk

Offline

#18 2011-10-25 22:03:32

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

Okay, your kernel log doesn't really say anything we didn't see in the screenshot :-S

I just did stfw on:

nvidia "api mismatch" "arch*"

and got a number of hits. Maybe they will help.

Offline

#19 2011-10-25 22:18:27

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Oh thanks- I found something that I'm gonna try- a solution proposed also by Wonder smile

Offline

#20 2011-10-25 22:26:38

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

Oct 24 18:06:35 localhost kernel: [12057.288285] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 24 18:06:35 localhost kernel: [12057.288287] NVRM: this kernel module has the version 280.13.  Please
Oct 24 18:06:35 localhost kernel: [12057.288288] NVRM: make sure that this kernel module and all NVIDIA drive

so until now you provided the wrong logs? damn you

pacman -Qs nvidia

have you used nvidia installer from nvidia website without telling us?

Give what you have. To someone, it may be better than you dare to think.

Offline

#21 2011-10-25 22:28:38

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

No, it was just the kernel log that was from Ubuntu. And everything I do is through pacman.

Offline

#22 2011-10-25 22:29:22

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

c0dege3k wrote:

No, it was just the kernel log that was from Ubuntu. And everything I do is through pacman.

and ls /etc/modprobe.d ?

Give what you have. To someone, it may be better than you dare to think.

Offline

#23 2011-10-25 22:31:49

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Sorry that one too- I'm trying to do HW and solve this at the same time:

modprobe.conf  nouveau_blacklist.conf  nvidia-installer-disable-nouveau.conf

Offline

#24 2011-10-25 22:33:42

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

OK you used nvidia installer. I CANNOT HELP YOU. maybe others can, but i refuse smile

Last edited by wonder (2011-10-25 22:34:20)

Give what you have. To someone, it may be better than you dare to think.

Offline

#25 2011-10-25 22:37:36

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

I didn't though. Honest to GOD. Is there another way that file could have made its way in there?

and if I used the installer, how would it be updated through pacman??

Last edited by c0dege3k (2011-10-25 22:38:04)

Offline

Pages: 1 2

Board footer

Powered by FluxBB