You are not logged in.

Pages: 1 2

#26 2011-10-25 22:51:51

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

firstly you should reinstall nvidia and nvidia-utils, reinstall mesa, delete nvidia-installer-disable-nouveau.conf.

no idea what other damage did the installer but pretty sure it messed up some symlinks about vdpau.

Give what you have. To someone, it may be better than you dare to think.

Offline

#27 2011-10-25 22:55:30

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: Nvidia kernel module not starting after upgrade

I suspect you would need to uninstall the blob first.

Instructions <(stfw).

Edit: wonder got to it first :-)

Last edited by /dev/zero (2011-10-25 22:56:43)

Offline

#28 2011-10-25 23:58:48

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

wonder wrote:

firstly you should reinstall nvidia and nvidia-utils, reinstall mesa, delete nvidia-installer-disable-nouveau.conf.

no idea what other damage did the installer but pretty sure it messed up some symlinks about vdpau.

I did all that and rebooted, but no luck.

Offline

#29 2011-10-26 07:48:37

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

new logs please?

Give what you have. To someone, it may be better than you dare to think.

Offline

#30 2011-10-26 14:59:23

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

http://db.tt/T2efeOMn the new kernel.log

Offline

#31 2011-10-26 15:10:04

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

find /lib/modules -iname nvidia.ko*

paste

Give what you have. To someone, it may be better than you dare to think.

Offline

#32 2011-10-26 22:32:46

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Output:

/lib/modules/3.0-ARCH/kernel/drivers/video/nvidia.ko.gz
/lib/modules/3.0-ARCH/kernel/drivers/video/nvidia.ko

Last edited by c0dege3k (2011-10-26 22:48:42)

Offline

#33 2011-10-26 22:34:20

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: Nvidia kernel module not starting after upgrade

delete the second one. preserve /lib/modules/3.0-ARCH/kernel/drivers/video/nvidia.ko.gz and then run depmod -a

Last edited by wonder (2011-10-26 22:34:47)

Give what you have. To someone, it may be better than you dare to think.

Offline

#34 2011-10-26 23:34:34

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

No luck.
New kernel.log: 

f]
Oct 26 18:54:47 localhost kernel: [    0.370165] pci 0000:00:01.0: PCI bridge to [bus 01-01]
Oct 26 18:54:47 localhost kernel: [    0.370168] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
Oct 26 18:54:47 localhost kernel: [    0.370172] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xfbffffff]
Oct 26 18:54:47 localhost kernel: [    0.370176] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370181] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
Oct 26 18:54:47 localhost kernel: [    0.370184] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
Oct 26 18:54:47 localhost kernel: [    0.370191] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
Oct 26 18:54:47 localhost kernel: [    0.370197] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370206] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
Oct 26 18:54:47 localhost kernel: [    0.370208] pci 0000:00:1c.1:   bridge window [io  disabled]
Oct 26 18:54:47 localhost kernel: [    0.370214] pci 0000:00:1c.1:   bridge window [mem 0xfcf00000-0xfcffffff]
Oct 26 18:54:47 localhost kernel: [    0.370220] pci 0000:00:1c.1:   bridge window [mem pref disabled]
Oct 26 18:54:47 localhost kernel: [    0.370228] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
Oct 26 18:54:47 localhost kernel: [    0.370232] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
Oct 26 18:54:47 localhost kernel: [    0.370239] pci 0000:00:1c.2:   bridge window [mem 0xfd000000-0xfddfffff]
Oct 26 18:54:47 localhost kernel: [    0.370244] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf6efffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370253] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
Oct 26 18:54:47 localhost kernel: [    0.370257] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
Oct 26 18:54:47 localhost kernel: [    0.370263] pci 0000:00:1c.5:   bridge window [mem 0xfde00000-0xfdefffff]
Oct 26 18:54:47 localhost kernel: [    0.370269] pci 0000:00:1c.5:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370278] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
Oct 26 18:54:47 localhost kernel: [    0.370280] pci 0000:00:1e.0:   bridge window [io  disabled]
Oct 26 18:54:47 localhost kernel: [    0.370287] pci 0000:00:1e.0:   bridge window [mem 0xfdf00000-0xfdffffff]
Oct 26 18:54:47 localhost kernel: [    0.370292] pci 0000:00:1e.0:   bridge window [mem pref disabled]
Oct 26 18:54:47 localhost kernel: [    0.370310] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 26 18:54:47 localhost kernel: [    0.370315] pci 0000:00:01.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370322] pci 0000:00:1c.0: enabling device (0104 -> 0107)
Oct 26 18:54:47 localhost kernel: [    0.370326] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 26 18:54:47 localhost kernel: [    0.370332] pci 0000:00:1c.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370341] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    0.370346] pci 0000:00:1c.1: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370356] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 26 18:54:47 localhost kernel: [    0.370361] pci 0000:00:1c.2: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370369] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    0.370375] pci 0000:00:1c.5: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370384] pci 0000:00:1e.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.370389] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
Oct 26 18:54:47 localhost kernel: [    0.370391] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
Oct 26 18:54:47 localhost kernel: [    0.370394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Oct 26 18:54:47 localhost kernel: [    0.370397] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Oct 26 18:54:47 localhost kernel: [    0.370399] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
Oct 26 18:54:47 localhost kernel: [    0.370402] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
Oct 26 18:54:47 localhost kernel: [    0.370404] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
Oct 26 18:54:47 localhost kernel: [    0.370407] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370410] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
Oct 26 18:54:47 localhost kernel: [    0.370412] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
Oct 26 18:54:47 localhost kernel: [    0.370415] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370418] pci_bus 0000:03: resource 1 [mem 0xfcf00000-0xfcffffff]
Oct 26 18:54:47 localhost kernel: [    0.370420] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
Oct 26 18:54:47 localhost kernel: [    0.370423] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfddfffff]
Oct 26 18:54:47 localhost kernel: [    0.370425] pci_bus 0000:04: resource 2 [mem 0xf4000000-0xf6efffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370428] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
Oct 26 18:54:47 localhost kernel: [    0.370431] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
Oct 26 18:54:47 localhost kernel: [    0.370433] pci_bus 0000:06: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
Oct 26 18:54:47 localhost kernel: [    0.370436] pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff]
Oct 26 18:54:47 localhost kernel: [    0.370439] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
Oct 26 18:54:47 localhost kernel: [    0.370441] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
Oct 26 18:54:47 localhost kernel: [    0.370444] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
Oct 26 18:54:47 localhost kernel: [    0.370446] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
Oct 26 18:54:47 localhost kernel: [    0.370448] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xffffffff]
Oct 26 18:54:47 localhost kernel: [    0.370533] NET: Registered protocol family 2
Oct 26 18:54:47 localhost kernel: [    0.370742] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 26 18:54:47 localhost kernel: [    0.372036] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Oct 26 18:54:47 localhost kernel: [    0.376053] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 26 18:54:47 localhost kernel: [    0.376560] TCP: Hash tables configured (established 524288 bind 65536)
Oct 26 18:54:47 localhost kernel: [    0.376563] TCP reno registered
Oct 26 18:54:47 localhost kernel: [    0.376575] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Oct 26 18:54:47 localhost kernel: [    0.376613] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Oct 26 18:54:47 localhost kernel: [    0.376962] NET: Registered protocol family 1
Oct 26 18:54:47 localhost kernel: [    0.377186] pci 0000:01:00.0: Boot video device
Oct 26 18:54:47 localhost kernel: [    0.377208] PCI: CLS 32 bytes, default 64
Oct 26 18:54:47 localhost kernel: [    0.377266] Unpacking initramfs...
Oct 26 18:54:47 localhost kernel: [    0.411573] Freeing initrd memory: 2160k freed
Oct 26 18:54:47 localhost kernel: [    0.412401] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 26 18:54:47 localhost kernel: [    0.412406] Placing 64MB software IO TLB between ffff8800bbf7b000 - ffff8800bff7b000
Oct 26 18:54:47 localhost kernel: [    0.412408] software IO TLB at phys 0xbbf7b000 - 0xbff7b000
Oct 26 18:54:47 localhost kernel: [    0.412439] Simple Boot Flag at 0x51 set to 0x1
Oct 26 18:54:47 localhost kernel: [    0.412873] audit: initializing netlink socket (disabled)
Oct 26 18:54:47 localhost kernel: [    0.412887] type=2000 audit(1319669675.409:1): initialized
Oct 26 18:54:47 localhost kernel: [    0.424428] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 26 18:54:47 localhost kernel: [    0.448167] VFS: Disk quotas dquot_6.5.2
Oct 26 18:54:47 localhost kernel: [    0.448328] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 26 18:54:47 localhost kernel: [    0.448509] msgmni has been set to 7929
Oct 26 18:54:47 localhost kernel: [    0.448756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 26 18:54:47 localhost kernel: [    0.448797] io scheduler noop registered
Oct 26 18:54:47 localhost kernel: [    0.448799] io scheduler deadline registered
Oct 26 18:54:47 localhost kernel: [    0.448853] io scheduler cfq registered (default)
Oct 26 18:54:47 localhost kernel: [    0.448984] pcieport 0000:00:01.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.449016] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.449113] pcieport 0000:00:1c.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.449169] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.449291] pcieport 0000:00:1c.1: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.449347] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.449455] pcieport 0000:00:1c.2: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.449511] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.449627] pcieport 0000:00:1c.5: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.449684] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.449803] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449806] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449810] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
Oct 26 18:54:47 localhost kernel: [    0.449832] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449838] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Oct 26 18:54:47 localhost kernel: [    0.449862] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449865] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449871] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
Oct 26 18:54:47 localhost kernel: [    0.449894] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449900] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
Oct 26 18:54:47 localhost kernel: [    0.449923] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449926] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
Oct 26 18:54:47 localhost kernel: [    0.449931] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
Oct 26 18:54:47 localhost kernel: [    0.450043] intel_idle: MWAIT substates: 0x22220
Oct 26 18:54:47 localhost kernel: [    0.450045] intel_idle: does not run on family 6 model 23
Oct 26 18:54:47 localhost kernel: [    0.450051] ERST: Table is not found!
Oct 26 18:54:47 localhost kernel: [    0.450117] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oct 26 18:54:47 localhost kernel: [    0.663603] Linux agpgart interface v0.103
Oct 26 18:54:47 localhost kernel: [    0.663694] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 26 18:54:47 localhost kernel: [    0.667350] i8042: Detected active multiplexing controller, rev 1.1
Oct 26 18:54:47 localhost kernel: [    0.668964] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 26 18:54:47 localhost kernel: [    0.669000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 26 18:54:47 localhost kernel: [    0.669025] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 26 18:54:47 localhost kernel: [    0.669052] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 26 18:54:47 localhost kernel: [    0.669076] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 26 18:54:47 localhost kernel: [    0.669161] mousedev: PS/2 mouse device common for all mice
Oct 26 18:54:47 localhost kernel: [    0.669237] rtc_cmos 00:03: RTC can wake from S4
Oct 26 18:54:47 localhost kernel: [    0.669360] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Oct 26 18:54:47 localhost kernel: [    0.669391] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct 26 18:54:47 localhost kernel: [    0.669403] cpuidle: using governor ladder
Oct 26 18:54:47 localhost kernel: [    0.669405] cpuidle: using governor menu
Oct 26 18:54:47 localhost kernel: [    0.669642] TCP cubic registered
Oct 26 18:54:47 localhost kernel: [    0.669645] NET: Registered protocol family 17
Oct 26 18:54:47 localhost kernel: [    0.669654] Registering the dns_resolver key type
Oct 26 18:54:47 localhost kernel: [    0.669756] PM: Hibernation image not present or could not be loaded.
Oct 26 18:54:47 localhost kernel: [    0.669762] registered taskstats version 1
Oct 26 18:54:47 localhost kernel: [    0.681159] rtc_cmos 00:03: setting system clock to 2011-10-26 22:54:36 UTC (1319669676)
Oct 26 18:54:47 localhost kernel: [    0.681208] Initializing network drop monitor service
Oct 26 18:54:47 localhost kernel: [    0.682679] Freeing unused kernel memory: 712k freed
Oct 26 18:54:47 localhost kernel: [    0.682854] Write protecting the kernel read-only data: 6144k
Oct 26 18:54:47 localhost kernel: [    0.682995] Freeing unused kernel memory: 12k freed
Oct 26 18:54:47 localhost kernel: [    0.685961] Freeing unused kernel memory: 776k freed
Oct 26 18:54:47 localhost kernel: [    0.706368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 26 18:54:47 localhost kernel: [    0.728974] usbcore: registered new interface driver usbfs
Oct 26 18:54:47 localhost kernel: [    0.729002] usbcore: registered new interface driver hub
Oct 26 18:54:47 localhost kernel: [    0.730649] usbcore: registered new device driver usb
Oct 26 18:54:47 localhost kernel: [    0.765361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 26 18:54:47 localhost kernel: [    0.765398] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 26 18:54:47 localhost kernel: [    0.765432] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.765437] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.765493] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Oct 26 18:54:47 localhost kernel: [    0.765540] ehci_hcd 0000:00:1a.7: debug port 1
Oct 26 18:54:47 localhost kernel: [    0.777437] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Oct 26 18:54:47 localhost kernel: [    0.777466] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
Oct 26 18:54:47 localhost kernel: [    0.780486] SCSI subsystem initialized
Oct 26 18:54:47 localhost kernel: [    0.794611] libata version 3.00 loaded.
Oct 26 18:54:47 localhost kernel: [    0.800174] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Oct 26 18:54:47 localhost kernel: [    0.800350] hub 1-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.800356] hub 1-0:1.0: 6 ports detected
Oct 26 18:54:47 localhost kernel: [    0.800467] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 26 18:54:47 localhost kernel: [    0.800500] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.800505] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.800516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Oct 26 18:54:47 localhost kernel: [    0.800556] ehci_hcd 0000:00:1d.7: debug port 1
Oct 26 18:54:47 localhost kernel: [    0.804449] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Oct 26 18:54:47 localhost kernel: [    0.804471] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
Oct 26 18:54:47 localhost kernel: [    0.816719] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 26 18:54:47 localhost kernel: [    0.816874] hub 2-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.816879] hub 2-0:1.0: 6 ports detected
Oct 26 18:54:47 localhost kernel: [    0.816974] ahci 0000:00:1f.2: version 3.0
Oct 26 18:54:47 localhost kernel: [    0.816997] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 26 18:54:47 localhost kernel: [    0.817058] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    0.818156] ahci: SSS flag set, parallel bus scan disabled
Oct 26 18:54:47 localhost kernel: [    0.818195] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
Oct 26 18:54:47 localhost kernel: [    0.818199] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
Oct 26 18:54:47 localhost kernel: [    0.818206] ahci 0000:00:1f.2: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.818846] uhci_hcd: USB Universal Host Controller Interface driver
Oct 26 18:54:47 localhost kernel: [    0.830745] scsi0 : ahci
Oct 26 18:54:47 localhost kernel: [    0.830892] scsi1 : ahci
Oct 26 18:54:47 localhost kernel: [    0.830963] scsi2 : ahci
Oct 26 18:54:47 localhost kernel: [    0.831035] scsi3 : ahci
Oct 26 18:54:47 localhost kernel: [    0.831104] scsi4 : ahci
Oct 26 18:54:47 localhost kernel: [    0.831174] scsi5 : ahci
Oct 26 18:54:47 localhost kernel: [    0.831444] ata1: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff100 irq 45
Oct 26 18:54:47 localhost kernel: [    0.831448] ata2: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff180 irq 45
Oct 26 18:54:47 localhost kernel: [    0.831450] ata3: DUMMY
Oct 26 18:54:47 localhost kernel: [    0.831452] ata4: DUMMY
Oct 26 18:54:47 localhost kernel: [    0.831453] ata5: DUMMY
Oct 26 18:54:47 localhost kernel: [    0.831456] ata6: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff380 irq 45
Oct 26 18:54:47 localhost kernel: [    0.831513] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 26 18:54:47 localhost kernel: [    0.831526] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.831532] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.831572] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct 26 18:54:47 localhost kernel: [    0.831652] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
Oct 26 18:54:47 localhost kernel: [    0.831821] hub 3-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.831826] hub 3-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    0.831910] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 26 18:54:47 localhost kernel: [    0.831919] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.831923] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.831931] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct 26 18:54:47 localhost kernel: [    0.831968] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
Oct 26 18:54:47 localhost kernel: [    0.832102] hub 4-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.832106] hub 4-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    0.832180] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 26 18:54:47 localhost kernel: [    0.832187] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.832190] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.832198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Oct 26 18:54:47 localhost kernel: [    0.832235] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
Oct 26 18:54:47 localhost kernel: [    0.832369] hub 5-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.832373] hub 5-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    0.832447] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 26 18:54:47 localhost kernel: [    0.832454] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.832458] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.832468] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Oct 26 18:54:47 localhost kernel: [    0.832497] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
Oct 26 18:54:47 localhost kernel: [    0.832629] hub 6-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.832633] hub 6-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    0.832707] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 26 18:54:47 localhost kernel: [    0.832714] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.832718] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.832725] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Oct 26 18:54:47 localhost kernel: [    0.832753] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
Oct 26 18:54:47 localhost kernel: [    0.832887] hub 7-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.832891] hub 7-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    0.832970] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 26 18:54:47 localhost kernel: [    0.832977] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    0.832981] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 26 18:54:47 localhost kernel: [    0.832990] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Oct 26 18:54:47 localhost kernel: [    0.833017] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
Oct 26 18:54:47 localhost kernel: [    0.833147] hub 8-0:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    0.833152] hub 8-0:1.0: 2 ports detected
Oct 26 18:54:47 localhost kernel: [    1.123352] usb 2-5: new high speed USB device number 2 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    1.150037] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 26 18:54:47 localhost kernel: [    1.150954] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 26 18:54:47 localhost kernel: [    1.151005] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 26 18:54:47 localhost kernel: [    1.151009] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 26 18:54:47 localhost kernel: [    1.151337] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
Oct 26 18:54:47 localhost kernel: [    1.151340] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Oct 26 18:54:47 localhost kernel: [    1.151953] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Oct 26 18:54:47 localhost kernel: [    1.152002] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 26 18:54:47 localhost kernel: [    1.152006] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 26 18:54:47 localhost kernel: [    1.152331] ata1.00: configured for UDMA/133
Oct 26 18:54:47 localhost kernel: [    1.152514] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
Oct 26 18:54:47 localhost kernel: [    1.413349] Refined TSC clocksource calibration: 1994.999 MHz.
Oct 26 18:54:47 localhost kernel: [    1.413354] Switching to clocksource tsc
Oct 26 18:54:47 localhost kernel: [    1.470022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 26 18:54:47 localhost kernel: [    1.480248] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 26 18:54:47 localhost kernel: [    1.480252] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 26 18:54:47 localhost kernel: [    1.483932] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SR04, max UDMA/133
Oct 26 18:54:47 localhost kernel: [    1.489848] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
Oct 26 18:54:47 localhost kernel: [    1.489852] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Oct 26 18:54:47 localhost kernel: [    1.493536] ata2.00: configured for UDMA/133
Oct 26 18:54:47 localhost kernel: [    1.602796] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SR04 PQ: 0 ANSI: 5
Oct 26 18:54:47 localhost kernel: [    1.910017] usb 2-6: new high speed USB device number 3 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    1.920022] ata6: SATA link down (SStatus 0 SControl 300)
Oct 26 18:54:47 localhost kernel: [    1.926467] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Oct 26 18:54:47 localhost kernel: [    1.926520] sd 0:0:0:0: [sda] Write Protect is off
Oct 26 18:54:47 localhost kernel: [    1.926523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 26 18:54:47 localhost kernel: [    1.926546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 26 18:54:47 localhost kernel: [    2.040238]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
Oct 26 18:54:47 localhost kernel: [    2.040799] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 26 18:54:47 localhost kernel: [    2.042292] hub 2-6:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    2.042446] hub 2-6:1.0: 3 ports detected
Oct 26 18:54:47 localhost kernel: [    2.043597] usb 2-6: USB disconnect, device number 3
Oct 26 18:54:47 localhost kernel: [    2.152928] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 26 18:54:47 localhost kernel: [    2.152935] cdrom: Uniform CD-ROM driver Revision: 3.20
Oct 26 18:54:47 localhost kernel: [    2.153240] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 26 18:54:47 localhost kernel: [    2.410020] usb 2-6: new high speed USB device number 4 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    2.542106] hub 2-6:1.0: USB hub found
Oct 26 18:54:47 localhost kernel: [    2.542193] hub 2-6:1.0: 3 ports detected
Oct 26 18:54:47 localhost kernel: [    2.806828] usb 2-6.1: new low speed USB device number 5 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    2.907623] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/input/input1
Oct 26 18:54:47 localhost kernel: [    2.907705] generic-usb 0003:0B39:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input0
Oct 26 18:54:47 localhost kernel: [    2.912103] input: Composite USB PS2 Converter USB to PS2 Adaptor  V3.10 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.1/input/input2
Oct 26 18:54:47 localhost kernel: [    2.912190] generic-usb 0003:0B39:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor  V3.10] on usb-0000:00:1d.7-6.1/input1
Oct 26 18:54:47 localhost kernel: [    2.912208] usbcore: registered new interface driver usbhid
Oct 26 18:54:47 localhost kernel: [    2.912210] usbhid: USB HID core driver
Oct 26 18:54:47 localhost kernel: [    2.966832] usb 2-6.2: new low speed USB device number 6 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    2.974471] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Oct 26 18:54:47 localhost kernel: [    5.020489] vboxdrv: Found 2 processor cores.
Oct 26 18:54:47 localhost kernel: [    5.020556] VBoxDrv: dbg - g_abExecMemory=ffffffffa01aeb20
Oct 26 18:54:47 localhost kernel: [    5.020577] vboxdrv: fAsync=0 offMin=0x186 offMax=0x938
Oct 26 18:54:47 localhost kernel: [    5.020624] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Oct 26 18:54:47 localhost kernel: [    5.020626] vboxdrv: Successfully loaded version 4.1.2_OSE (interface 0x00190000).
Oct 26 18:54:47 localhost kernel: [    5.444979] iTCO_vendor_support: vendor-support=0
Oct 26 18:54:47 localhost kernel: [    5.562675] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Oct 26 18:54:47 localhost kernel: [    5.562684] ACPI: Sleep Button [SLPB]
Oct 26 18:54:47 localhost kernel: [    5.562741] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
Oct 26 18:54:47 localhost kernel: [    5.562810] ACPI: AC Adapter [AC0] (on-line)
Oct 26 18:54:47 localhost kernel: [    5.564418] ACPI: Battery Slot [BAT0] (battery absent)
Oct 26 18:54:47 localhost kernel: [    5.565541] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 26 18:54:47 localhost kernel: [    5.565584] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 26 18:54:47 localhost kernel: [    5.566453] ACPI: Lid Switch [LID]
Oct 26 18:54:47 localhost kernel: [    5.566522] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Oct 26 18:54:47 localhost kernel: [    5.566529] ACPI: Power Button [PWRF]
Oct 26 18:54:47 localhost kernel: [    5.570055] thermal LNXTHERM:00: registered as thermal_zone0
Oct 26 18:54:47 localhost kernel: [    5.570058] ACPI: Thermal Zone [THRM] (48 C)
Oct 26 18:54:47 localhost kernel: [    5.587408] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Oct 26 18:54:47 localhost kernel: [    5.587535] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
Oct 26 18:54:47 localhost kernel: [    5.587617] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 26 18:54:47 localhost kernel: [    5.642301] asus_acpi: Asus Laptop ACPI Extras version 0.30
Oct 26 18:54:47 localhost kernel: [    5.642443] asus_acpi:   unsupported model N80Vb, trying default values
Oct 26 18:54:47 localhost kernel: [    5.642445] asus_acpi:   send /proc/acpi/dsdt to the developers
Oct 26 18:54:47 localhost kernel: [    5.697354] acpi device:1d: registered as cooling_device0
Oct 26 18:54:47 localhost kernel: [    5.697454] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input6
Oct 26 18:54:47 localhost kernel: [    5.697462] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Oct 26 18:54:47 localhost kernel: [    5.725980] sdhci: Secure Digital Host Controller Interface driver
Oct 26 18:54:47 localhost kernel: [    5.725983] sdhci: Copyright(c) Pierre Ossman
Oct 26 18:54:47 localhost kernel: [    5.726975] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
Oct 26 18:54:47 localhost kernel: [    5.727082] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    5.728121] sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 26 18:54:47 localhost kernel: [    5.728151] _regulator_get: 0000:07:03.1 supply vmmc not found, using dummy regulator
Oct 26 18:54:47 localhost kernel: [    5.729192] Registered led device: mmc0::
Oct 26 18:54:47 localhost kernel: [    5.730274] mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
Oct 26 18:54:47 localhost kernel: [    5.791026] input: PC Speaker as /devices/platform/pcspkr/input/input7
Oct 26 18:54:47 localhost kernel: [    5.797720] asus_laptop: Asus Laptop Support version 0.42
Oct 26 18:54:47 localhost kernel: [    5.797870] asus_laptop:   N80Vb model detected
Oct 26 18:54:47 localhost kernel: [    5.798157] asus_laptop: Backlight controlled by ACPI video driver
Oct 26 18:54:47 localhost kernel: [    5.798237] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input8
Oct 26 18:54:47 localhost kernel: [    5.802251] ite_cir: Auto-detected model: ITE8708 CIR transceiver
Oct 26 18:54:47 localhost kernel: [    5.802254] ite_cir: Using model: ITE8708 CIR transceiver
Oct 26 18:54:47 localhost kernel: [    5.802276] ite_cir: TX-capable: 1
Oct 26 18:54:47 localhost kernel: [    5.802277] ite_cir: Sample period (ns): 8680
Oct 26 18:54:47 localhost kernel: [    5.802279] ite_cir: TX carrier frequency (Hz): 38000
Oct 26 18:54:47 localhost kernel: [    5.802281] ite_cir: TX duty cycle (%): 33
Oct 26 18:54:47 localhost kernel: [    5.802283] ite_cir: RX low carrier frequency (Hz): 0
Oct 26 18:54:47 localhost kernel: [    5.802285] ite_cir: RX high carrier frequency (Hz): 0
Oct 26 18:54:47 localhost kernel: [    5.840793] IR NEC protocol handler initialized
Oct 26 18:54:47 localhost kernel: [    5.853508] r592 0000:07:03.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    5.853650] r592: driver successfully loaded
Oct 26 18:54:47 localhost kernel: [    5.863374] Registered IR keymap rc-rc6-mce
Oct 26 18:54:47 localhost kernel: [    5.863483] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input9
Oct 26 18:54:47 localhost kernel: [    5.863574] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
Oct 26 18:54:47 localhost kernel: [    5.864183] ite_cir: driver has been successfully loaded
Oct 26 18:54:47 localhost kernel: [    5.917370] IR RC5(x) protocol handler initialized
Oct 26 18:54:47 localhost kernel: [    5.958944] IR RC6 protocol handler initialized
Oct 26 18:54:47 localhost kernel: [    5.959712] r852 0000:07:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    5.960613] r852: driver loaded successfully
Oct 26 18:54:47 localhost kernel: [    5.970925] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 26 18:54:47 localhost kernel: [    5.970953] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    5.971013] r8169 0000:06:00.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    5.971087] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    5.971326] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc90000670000, dc:4a:3a:e8:16:00, XID 1c4000c0 IRQ 46
Oct 26 18:54:47 localhost kernel: [    5.979732] IR JVC protocol handler initialized
Oct 26 18:54:47 localhost kernel: [    6.002181] ACPI: acpi_idle registered with cpuidle
Oct 26 18:54:47 localhost kernel: [    6.006119] Monitor-Mwait will be used to enter C-1 state
Oct 26 18:54:47 localhost kernel: [    6.009702] Monitor-Mwait will be used to enter C-3 state
Oct 26 18:54:47 localhost kernel: [    6.009715] Marking TSC unstable due to TSC halts in idle
Oct 26 18:54:47 localhost kernel: [    6.009792] Switching to clocksource hpet
Oct 26 18:54:47 localhost kernel: [    6.055506] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 26 18:54:47 localhost kernel: [    6.113459] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
Oct 26 18:54:47 localhost kernel: [    6.189603] IR Sony protocol handler initialized
Oct 26 18:54:47 localhost kernel: [    6.220475] cfg80211: Calling CRDA to update world regulatory domain
Oct 26 18:54:47 localhost kernel: [    6.230881] lirc_dev: IR Remote Control driver registered, major 250 
Oct 26 18:54:47 localhost kernel: [    6.262485] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 26 18:54:47 localhost kernel: [    6.262564] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    6.262601] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    6.437868] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
Oct 26 18:54:47 localhost kernel: [    6.437872] IR LIRC bridge handler initialized
Oct 26 18:54:47 localhost kernel: [    6.540941] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
Oct 26 18:54:47 localhost kernel: [    6.614791] firewire_core: created device fw0: GUID ffffffffffffffff, S400
Oct 26 18:54:47 localhost kernel: [    6.635961] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
Oct 26 18:54:47 localhost kernel: [    6.674495] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
Oct 26 18:54:47 localhost kernel: [    6.706596] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 26 18:54:47 localhost kernel: [    6.706600] iwlagn: Copyright(c) 2003-2011 Intel Corporation
Oct 26 18:54:47 localhost kernel: [    6.706710] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 26 18:54:47 localhost kernel: [    6.706720] iwlagn 0000:03:00.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    6.706776] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
Oct 26 18:54:47 localhost kernel: [    6.728798] iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
Oct 26 18:54:47 localhost kernel: [    6.728802] iwlagn 0000:03:00.0: Device SKU: 0Xb
Oct 26 18:54:47 localhost kernel: [    6.728812] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Oct 26 18:54:47 localhost kernel: [    6.728893] iwlagn 0000:03:00.0: irq 48 for MSI/MSI-X
Oct 26 18:54:47 localhost kernel: [    6.762829] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Oct 26 18:54:47 localhost kernel: [    6.762901] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Oct 26 18:54:47 localhost kernel: [    6.880631] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
Oct 26 18:54:47 localhost kernel: [    6.880927] Registered led device: phy0-led
Oct 26 18:54:47 localhost kernel: [    6.910024] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Oct 26 18:54:47 localhost kernel: [    7.360971] nvidia: module license 'NVIDIA' taints kernel.
Oct 26 18:54:47 localhost kernel: [    7.360976] Disabling lock debugging due to kernel taint
Oct 26 18:54:47 localhost kernel: [    8.024177] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/input/input14
Oct 26 18:54:47 localhost kernel: [    8.024287] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input0
Oct 26 18:54:47 localhost kernel: [    8.027380] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.1/input/input15
Oct 26 18:54:47 localhost kernel: [    8.027489] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1d.7-6.2/input1
Oct 26 18:54:47 localhost kernel: [    8.160874] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 26 18:54:47 localhost kernel: [    8.160885] nvidia 0000:01:00.0: setting latency timer to 64
Oct 26 18:54:47 localhost kernel: [    8.160891] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 26 18:54:47 localhost kernel: [    8.161085] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  280.13  Wed Jul 27 16:53:56 PDT 2011
Oct 26 18:54:47 localhost kernel: [    8.474846] Linux media interface: v0.10
Oct 26 18:54:47 localhost kernel: [    8.870059] Linux video capture interface: v2.00
Oct 26 18:54:47 localhost kernel: [    8.885418] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:8a34)
Oct 26 18:54:47 localhost kernel: [    8.963735] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Oct 26 18:54:47 localhost kernel: [    8.986845] usbcore: registered new interface driver uvcvideo
Oct 26 18:54:47 localhost kernel: [    8.986848] USB Video Class driver (v1.1.0)
Oct 26 18:54:47 localhost kernel: [    9.190225] usb 2-6.3: new high speed USB device number 7 using ehci_hcd
Oct 26 18:54:47 localhost kernel: [    9.405802] Initializing USB Mass Storage driver...
Oct 26 18:54:47 localhost kernel: [    9.405953] scsi6 : usb-storage 2-6.3:1.0
Oct 26 18:54:47 localhost kernel: [    9.406100] usbcore: registered new interface driver usb-storage
Oct 26 18:54:47 localhost kernel: [    9.406103] USB Mass Storage support registered.
Oct 26 18:54:47 localhost kernel: [    9.407147] usbcore: registered new interface driver uas
Oct 26 18:54:47 localhost kernel: [    9.507813] EXT4-fs (sda3): re-mounted. Opts: (null)
Oct 26 18:54:47 localhost kernel: [    9.687940] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Oct 26 18:54:47 localhost kernel: [    9.803269] Adding 273100k swap on /dev/sda2.  Priority:-1 extents:1 across:273100k 
Oct 26 18:54:47 localhost kernel: [   10.404110] scsi 6:0:0:0: Direct-Access     Seagate  FreeAgent Go     0148 PQ: 0 ANSI: 4
Oct 26 18:54:47 localhost kernel: [   10.404333] sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 26 18:54:47 localhost kernel: [   10.405330] sd 6:0:0:0: [sdb] 625142447 512-byte logical blocks: (320 GB/298 GiB)
Oct 26 18:54:47 localhost kernel: [   10.405919] sd 6:0:0:0: [sdb] Write Protect is off
Oct 26 18:54:47 localhost kernel: [   10.405923] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
Oct 26 18:54:47 localhost kernel: [   10.406761] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 26 18:54:47 localhost kernel: [   10.464374]  sdb: unknown partition table
Oct 26 18:54:47 localhost kernel: [   10.467484] sd 6:0:0:0: [sdb] Attached SCSI disk
Oct 26 18:54:51 localhost kernel: [   15.676207] NET: Registered protocol family 10
Oct 26 18:54:54 localhost kernel: [   18.677482] NET: Registered protocol family 4
Oct 26 18:54:54 localhost kernel: [   18.714558] NET: Registered protocol family 5
Oct 26 18:54:54 localhost kernel: [   18.800027] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 26 18:54:54 localhost kernel: [   18.800029] NVRM: this kernel module has the version 280.13.  Please
Oct 26 18:54:54 localhost kernel: [   18.800030] NVRM: make sure that this kernel module and all NVIDIA driver
Oct 26 18:54:54 localhost kernel: [   18.800032] NVRM: components have the same version.
Oct 26 18:54:54 localhost kernel: [   18.880242] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 26 18:54:59 localhost kernel: [   24.087447] r8169 0000:06:00.0: eth0: link down
Oct 26 18:54:59 localhost kernel: [   24.087972] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 26 18:55:04 localhost kernel: [   28.754103] NVRM: API mismatch: the client has the version 285.05.09, but
Oct 26 18:55:04 localhost kernel: [   28.754105] NVRM: this kernel module has the version 280.13.  Please
Oct 26 18:55:04 localhost kernel: [   28.754107] NVRM: make sure that this kernel module and all NVIDIA driver
Oct 26 18:55:04 localhost kernel: [   28.754108] NVRM: components have the same version.

Thanks for helping me with this, by the way. I don't have enough knowledge of Linux to solve it myself

Also, I'm curious: would a solution like this work? https://bbs.archlinux.org/viewtopic.php?id=64473 (Obviously edited to the 285 version)

Last edited by c0dege3k (2011-10-26 23:40:06)

Offline

#35 2011-10-28 23:16:28

go4sail
Member
Registered: 2011-07-27
Posts: 1

Re: Nvidia kernel module not starting after upgrade

I had the same problem.  Just need to get the kernel to reload the modules.  I found this on another thread (post #2) and it worked for me:   mkinitcpio -p linux 

Also stated that reinstalling the kernel with sudo does not reload the modules but if you go to su mode then reinstall them it will. (post #20 and #21)

https://bbs.archlinux.org/viewtopic.php?id=972045

Offline

#36 2011-10-28 23:39:47

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Tried that and rebooted, but it still didn't work

Offline

#37 2011-10-30 01:16:34

c0dege3k
Member
Registered: 2011-05-10
Posts: 27

Re: Nvidia kernel module not starting after upgrade

Okay, I've switches to nouveau and installed the necessary xf86-input pkgs but my keyboard and external mouse+keyboard don't work

Offline

Pages: 1 2

Board footer

Powered by FluxBB