You are not logged in.

Pages: 1

#1 2011-10-28 23:11:46

aidaz
Member
Registered: 2011-10-28
Posts: 12

Asus n13 not working for me...

hello,

ive installed rt2870sta driver from AUR.
Blacklisted rt2800, rt2x00usb, rt2xoolib.
when i run iwconfig wlan0 is not being created.
[root@myhost modprobe.d]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.


[root@myhost modprobe.d]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 004: ID 08ec:0016 M-Systems Flash Disk Pioneers Kingston DataTraveler U3
Bus 001 Device 005: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter [Ralink RT3072]
Bus 001 Device 006: ID 04b8:0122 Seiko Epson Corp. Perfection 3590 scanner
Bus 002 Device 002: ID 1532:0015 Razer USA, Ltd

[root@myhost ~]# lsmod | grep rt2
rt2870sta             611390  0
usbcore               142576  7 rt2870sta,usb_storage,uas,usbhid,ohci_hcd,ehci_hcd


can someone help plz

Offline

#2 2011-10-28 23:32:34

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Asus n13 not working for me...

The rt2800usb driver now actually supports these devices, have you tried that?

Offline

#3 2011-10-29 13:31:35

aidaz
Member
Registered: 2011-10-28
Posts: 12

Re: Asus n13 not working for me...

i did. dhcpcd wlan0 times out. all tho once i succeded to connect with awus36nh. but after restart i cudnt do it again.
i very new to linux. so i must do something wrong.
my steps are:
1. iwconfig wlan1 mode ad-hoc
2. iwconfig wlan1 channel auto
3. ip link set wlan1 up
4. a) with static wep sec : iwconfig wlan1 essid home key bbbb11111
    b)without security :       iwconfig wlan1 essid home
5. to check that interface is working
[aidas@myhost ~]$ sudo iwlist wlan1 scan
Password:
wlan1     Scan completed :
          Cell 01 - Address: 40:4A:03:B6:54:EF
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=41/70  Signal level=-69 dBm 
                    Encryption key:off
                    ESSID:"Home"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000017062f12
                    Extra: Last beacon: 523ms ago
                    IE: Unknown: 0004486F6D65
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 03010B
                    IE: Unknown: 0706474220010D14
                    IE: Unknown: 200100
                    IE: Unknown: 2A0100
                    IE: Unknown: 32043048606C
          Cell 02 - Address: B2:88:0F:18:80:F3
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=70/70  Signal level=0 dBm 
                    Encryption key:on
                    ESSID:"home"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Ad-Hoc
                    Extra:tsf=0000000000000000
                    Extra: Last beacon: 366883ms ago
                    IE: Unknown: 0004686F6D65
                    IE: Unknown: 010882040B160C121824
                    IE: Unknown: 030101
                    IE: Unknown: 06020000
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD070050F202000100
6) dhcpcd wlan1
[aidas@myhost ~]$ sudo dhcpcd wlan1
dhcpcd[1158]: version 5.2.12 starting
dhcpcd[1158]: wlan1: broadcasting for a lease
^[[Adhcpcd[1158]: timed out

Offline

#4 2011-10-29 13:44:24

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: Asus n13 not working for me...

I've found ad-hoc networks work better if you explicitly set a channel on both sides. Also, I note "Home" and "home" as network names, that's not right, case matters in ssid name. And have you tried other kinds of connections, like connecting to an AP?

Offline

#5 2011-10-29 15:08:31

aidaz
Member
Registered: 2011-10-28
Posts: 12

Re: Asus n13 not working for me...

how do i connect to AP?

Offline

#6 2011-11-18 20:00:10

Sharker
Member
From: Spain
Registered: 2011-11-18
Posts: 7
Website

Re: Asus n13 not working for me...

aidaz wrote:

hello,

ive installed rt2870sta driver from AUR.
Blacklisted rt2800, rt2x00usb, rt2xoolib.
when i run iwconfig wlan0 is not being created.
[root@myhost modprobe.d]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.


[root@myhost modprobe.d]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 004: ID 08ec:0016 M-Systems Flash Disk Pioneers Kingston DataTraveler U3
Bus 001 Device 005: ID 0b05:1784 ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter [Ralink RT3072]
Bus 001 Device 006: ID 04b8:0122 Seiko Epson Corp. Perfection 3590 scanner
Bus 002 Device 002: ID 1532:0015 Razer USA, Ltd

[root@myhost ~]# lsmod | grep rt2
rt2870sta             611390  0
usbcore               142576  7 rt2870sta,usb_storage,uas,usbhid,ohci_hcd,ehci_hcd


can someone help plz

Hi, there is a better solution that poor kernel drivers and Aur drivers are too old.

First Download the latest drivers RT8070 /RT3070 /RT3370 /RT5370 /RT5372 http://www.ralinktech.com/en/04_support … hp?sn=5016

then uncompress and if you have 64bits system( if not, you haven't change anything) search on $dirinstal/os/linux/config.mk this:

ifeq ($(PLATFORM),PC)
    ifneq (,$(findstring 2.4,$(LINUX_SRC)))
        # Linux 2.4
        CFLAGS := -D__KERNEL__ -I$(LINUX_SRC)/include -I$(RT28xx_DIR)/include -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include $(LINUX_SRC)/include/linux/modversions.h $(WFLAGS)

Change mpreferred-stack-boundary=2 to 4

And change this flag with your cpu flag, see all list of all cpu supported http://gcc.gnu.org/onlinedocs/gcc/i386- … tions.html


If you use any networkmanager you must change on same file 

# Support Wpa_Supplicant
HAS_WPA_SUPPLICANT=n


# Support Native WpaSupplicant for Network Maganger
HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n

all to y.

And now, compile and install 

sudo su
make 
make install

and then add to /etc/rc.conf this blacklist modules and force the right module

MODULES=(!rt2800usb !rt2x00usb !rt2800lib !rt2x00lib !rt2870sta rt5370sta)

And reboot and enjoy your full 300 mbits usb on latest kernel 3.1 tongue (if you have dual band router)

Last edited by Sharker (2011-11-18 20:01:29)

Offline

#7 2012-01-01 20:49:24

Bazzaah
Member
Registered: 2010-03-15
Posts: 69

Re: Asus n13 not working for me...

I'd just like to echo what Sharker said for anyone else who's using this device - save yourself a headache and use the Ralink drivers.

They work very well and at long last I can use kernel 3 with this device!

Offline

#8 2012-02-17 00:14:23

Sharker
Member
From: Spain
Registered: 2011-11-18
Posts: 7
Website

Re: Asus n13 not working for me...

Hi,

Anything change on from 3.2.2, new kernels that i cannot compiling drivers. I think that limited headers or remove for make driver working. Now i ignored on pacman new kernel for works full speed wifi.

Offline

#9 2012-02-17 10:18:04

Bazzaah
Member
Registered: 2010-03-15
Posts: 69

Re: Asus n13 not working for me...

Drivers don't compile/install on all recent kernels (3.2.4 and 3.2.6*) but are fine on 3.2.5.

* probably down to moved depmod; will try later.

EDIT added symlink per this thread and can now install .ko under 3.2.6.

https://bbs.archlinux.org/viewtopic.php?id=135937

Last edited by Bazzaah (2012-02-17 14:36:32)

Offline

#10 2012-02-17 21:01:17

Sharker
Member
From: Spain
Registered: 2011-11-18
Posts: 7
Website

Re: Asus n13 not working for me...

Bazzaah wrote:

Drivers don't compile/install on all recent kernels (3.2.4 and 3.2.6*) but are fine on 3.2.5.

* probably down to moved depmod; will try later.

EDIT added symlink per this thread and can now install .ko under 3.2.6.

https://bbs.archlinux.org/viewtopic.php?id=135937


I've compiled on 3.2.6-1 smile again smile i think that all fix again

See 

uname -a 

Linux Esteso 3.2.6-1-ARCH #1 SMP PREEMPT Tue Feb 14 09:11:26 CET 2012 x86_64 Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz GenuineIntel GNU/Linux
lsmod | grep rt5370sta
rt5370sta             780712  1 
iwconfig 

ra0       Ralink STA  ESSID:"DUMBIFYOURREAD"  Nickname:"RT2870STA"
          Mode:Managed  Frequency=2.412 GHz  Access Point: E0:69:95:53:0F:FD   
          Bit Rate=104 Mb/s   
          RTS thr:off   Fragment thr:off
          Encryption key:XXXX-XXX-XXX-XXX   Security mode:open
          Link Quality=98/100  Signal level:-35 dBm  Noise level:-57 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

My bitrate is slow because there are too wifis on my street and all channels have occupy  :S , i'm thinking to buy a plc heheh tongue

Offline

#11 2012-02-19 10:37:17

Bazzaah
Member
Registered: 2010-03-15
Posts: 69

Re: Asus n13 not working for me...

glad you're sorted out!

Offline

Pages: 1

Board footer

Powered by FluxBB