You are not logged in.
Pages: 1
Hi guys! Can you please help-me? I've got this issue while my laptop is starting the OS:
$ dmesg | grep cfg80211
[ 4.464088] cfg80211: Calling CRDA to update world regulatory domain
[ 4.613642] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 26.610642] INFO @__wl_cfg80211_scan : system busy : scan for "" canceled
Hod do I fix this?
There is some useful information below:
$ uname -a
Linux archbox 3.1.2-1-ARCH #1 SMP PREEMPT Tue Nov 22 08:46:42 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz GenuineIntel GNU/Linux
$ lspci | grep -i net
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Offline
Your error doesn't tell me much, so I'm just guessing here, but did you install the firmware for your card (package b43-firmware in AUR)?
If you have, and it still doesn't work, post the full dmesg output.
Offline
Your error doesn't tell me much, so I'm just guessing here, but did you install the firmware for your card (package b43-firmware in AUR)?
If you have, and it still doesn't work, post the full dmesg output.
Yes, I installed broadcom-wl 5.100.82.112-2 driver in AUR.
This is my dmesg output: http://pastie.org/2921739
Offline
I have a similar output. But it's not a warning nor an error, just information.
Offline
Yes, I installed broadcom-wl 5.100.82.112-2 driver in AUR.
That's not what I meant. Your card works with the b43 driver. But it requires firmware for that. Which you get by installing the b43-firmware package.
broadcom-wl works too with your card, but it's a closed driver so you're on your own if you use it.
Erm, wait, do you actually have a problem with your card not working? Or is it just that message that you're curious about?
Last edited by Gusar (2011-11-26 00:28:52)
Offline
Erm, wait, do you actually have a problem with your card not working? Or is it just that message that you're curious about?
My card is working, but I already have this failure message on the system start.
This status is fail. I'd like to know why.
Offline
Pages: 1